Search PubMed⌕ Search

Biomedical subjects

Y Kanaya

Publications and source records attributed to Y Kanaya.

At least 37 records · Page 2Linked to original sources

Studies on dissolution tests for soft gelatin capsules by the rotating dialysis cell (RDC) method. VI. Preparation and evaluation of ibuprofen soft gelatin capsule.

We prepared soft gelatin capsules (SC) containing ibuprofen (IB), a widely used phenylpropionic acid-derived antiphlogistic-analgesic drug. To evaluate the SC, in vitro dissolution tests were performed both by the paddle (PD) method described in the Japanese Pharmacopoeia (JPXII) and by the rotating dialysis cell (RDC) method which we previously developed and evaluated for application. In vivo, the blood IB concentration was determined after administration to beagles. Higher bioavailability was observed after administration of the SC containing IB than after administration of the bulk IB powder. A higher correlation was observed between the in vitro dissolution behavior and in vivo results by the RDC method than by the PD method, suggesting the usefulness of the RDC method in the dissolution test of SC.

Animals↗

Application of calcium silicate for medicinal preparation. I. Solid preparation adsorbing an oily medicine to calcium silicate.

Calcium silicate (Florite RE, FLR), a fine porous powder, was recently approved as a medicinal additive. In this study we sought to make a solid preparation by absorbing an oily medicine to FLR; tocopheryl nicotinate (TN) was used as the oily medicine. TN adsorbed to FLR powder (TN-PO) was prepared by adsorbing TN ethanol solution to FLR and granulating with hydroxypropylcellulose (HPC) in order to improve the flowability. The results were as follows. FLR showed an excellent liquid holding ability compared with other excipients, and this was attributed to the high capillarity of the pores. In the adsorbing process, FLR particles were granulated with TN overflowing from the pores or adhering to the particle surface. The angle of repose was decreased with increasing TN content, which was attributed to the process of granulation, and the angle of repose of the granules with a binder (TN-GR) was below 40 degrees at any TN content. These results show that FLR is an useful additive for the solid preparation of an oily medicine.

Adsorption↗

Effects of compression pressure on physical and chemical stability of tablets containing an anticancer drug TAT-59.

(E)-4-[1-[4-[2-(Dimethylamino)ethoxy]phenyl]-2-(4-isopropyl) phenyl]-1-butenyl]phenyl monophosphate (TAT-59) is a new drug for the treatment of breast cancer. Physical and chemical stability of mixtures of TAT-59 and microcrystalline cellulose (1:9) compressed at 0, 300, 600 and 1400 kg/cm2 was evaluated by determination of water content, porosity and the amount of hydrolysis product, DP-TAT-59, formed. The water contents and porosity of these tablets scarcely changed during 57 d at 25-60 degrees C under 50% relative humidity (RH). The degradation rate of TAT-59 increased with increasing compression pressure as well as temperature. The apparent activation energy and frequency factor were determined from an Arrhenius plot of the degradation rate. Activation energy of these tablets was almost the same, while the frequency factor tended to increase with increasing compression pressure. The porosity and pore sizes in TAT-59-containing tablets decreased with increasing compressive force. We speculated from these observations that the increase in compression pressure decreased the distance and increased the contact area between TAT-59 and microcrystalline cellulose. The proximity between TAT-59 and moisture presented at the surface of microcrystalline cellulose by compression was considered to enhance the degradation of TAT-59.

Antineoplastic Agents↗

Application of the solid dispersion method to the controlled release of medicine. III. Control of the release of slightly water soluble medicine from solid dispersion granules.

In order to control the release rate of slightly water soluble medicine by using the solid dispersion (SD) method, the SD was prepared with a water soluble polymer and the slightly soluble medicine, and the medicine release from the solid dispersion granules was studied. The SD granules were prepared by the evaporation of ethanol after dissolving into ethanol a slightly water soluble medicine (flurbiprofen (FP)) and soluble polymers (hydroxypropyl cellulose (HPC)). HPC has four grades of molecular weight. The release rate of FP from SD was measured by the rotating basket method (JP XII). The release rate of FP from the SD granules was markedly larger than that from FP powder, and it was larger with a lower HPC molecular weight. It is speculated that these results were mainly based on the molecular dispersion state of FP and HPC in SD.

Cellulose↗

Effects of water content on physical and chemical stability of tablets containing an anticancer drug TAT-59.

(E)-4-[1-[4-[2-(Dimethylamino)ethoxy]phenyl]-2-(4-isopropyl) phenyl]-1-butenyl]phenyl monophosphate (TAT-59) is a new drug for the treatment of breast cancer. Physical and chemical stability of a tablet consisting of TAT-59 powder and a few excipients (Formulated tablet), a tablet consisting of only TAT-59 powder (TAT-59 tablet) and TAT-59 powder itself was evaluated based on water content, tensile strength, porosity, the amount of TAT-59 and its hydrolysis product, DP-TAT-59. The water content of Formulated tablet increased with relative humidity (RH), whereas that of TAT-59 tablet and TAT-59 powder scarcely changed. The equilibrium water content of Formulated tablet was much greater than that of the TAT-59 tablet or TAT-59 powder due to adsorbed moisture by the excipients. The tensile strength and porosity of Formulated tablet decreased and increased linearly, respectively, with increasing water content. The degradation rate of TAT-59 decreased in the following order: Formulated tablet > TAT-59 tablet > TAT-59 powder. The relationship between equilibrium water content and degradation rate of the Formulated tablet was determined by the Carstensen equation, in which the interaction order between the drug and water content was 1.9, and the degradation of TAT-59 in Formulated tablet was related to water content. Thus, it was found that the degradation of TAT-59 was accelerated by compression and addition of excipients.

Antineoplastic Agents↗

Application of the solid dispersion method to the controlled release of medicine. IV. Precise control of the release rate of a water soluble medicine by using the solid dispersion method applying the difference in the molecular weight of a polymer.

Solid dispersions were prepared by the evaporation of ethanol after dissolving into ethanol a water soluble medicine (oxprenolol hydrochloride (OXP)), four grades of water insoluble ethylcellulose (EC) and four grades of water soluble hydroxypropyl cellulose (HPC), both having different molecular weights. The precise control of the release rat of a water soluble medicine by applying the difference in the molecular weight of polymers was attempted. The pore size distribution in solid dispersion granules was measured before and after the dissolution test by mercury intrusion porosimetry to clarify the mechanism of medicine release from the granules when the molecular weights of polymers were different. The state of medicine in the solid dispersions was analyzed by thermal analysis and X-ray diffractometry. Although the difference was slight, the release rate of OXP from the granules of the OXP-HPC system decreased as the molecular weight of HPC increased. The release behavior of OXP in the OXP-EC system was scarcely affected by the molecular weight of EC. However, in the OXP-EC-HPC system, the release rate markedly decreased with a larger molecular weight of EC. It was thought from the results of the pore size distribution that there were two types of release routes for OXP; dissolving directly into the dissolution medium and diffusing in the swelled HPC phase, caused by the addition of HPC. The decrease in the release rate of OXP in the OXP-EC-HPC system was caused by the increase in the ratio of OXP dissolving via the latter route, occurring with a larger molecular weight of EC. These results suggest that it is feasible to precisely control the release of a water soluble medicine by varying the molecular weight of the polymers in the solid dispersion.

Cellulose↗

Studies on internal structure of tablets. III. Manufacturing of tablets containing microcapsules.

The aim of this study was to establish the best manufacturing conditions for preparation by the direct compression method of tablets which contain microcapsules having a minimal destruction rate of the coating wall, show the same dissolution pattern as microcapsules, and have enough mechanical strength for practical use, and to elucidate the internal structure of the tablets under the best manufacturing conditions. Degree of destruction of the microcapsule wall was evaluated by the dissolution rate of the medicine in the microcapsules. To learn the mechanical strength of tablets, the crushing strength and friability were measured; their internal structure was analyzed by the porosity and pore size distribution. The best manufacturing conditions for the tablets were thus determined, and it was clarified by analysis of the internal structure that these conditions are markedly affected by the flowability of prescribed powders and the packing state at compression.

Capsules↗

[Difference in the path between the incisal point and the tracer of simple mandibular movement recording apparatuses during the mandibular movement in the sagittal plane].

In order to study the difference in the path between the incisal point and its tracers, which were LED or a magnet, for two types of mechanism used in ready-made simple mandibular movement recording apparatuses, we calculated their locations during the rotally opening or protrusion of the mandible in the sagittal plane. The movement of the LED tracer was larger than that of the incisal point during the rotally opening movement, and its magnification ratio increased with increased opening. During the protrusion, the difference in their movements was affected by the balance of the inclination of the condyle path and the incisal path, and the movement of the tracer expanded vertically but contracted horizontally as the inclination of the incisal path was increased. The movement of magnet tracer was larger than that of the incisal point during the opening movement, but its magnification ratio decreased as the degree of opening increased. During the protrusion, the horizontal movement of the tracer was smaller than that of the incisal point, and its magnification ratio decreased as the inclination of incisal path became smaller. Its vertical movement was similar to that of the incisal point.

Dental Occlusion↗

Studies on improvement of pharmaceutical preparations prescribed in hospitals. VI. Oxaprozin nasal spray.

Many nasal sprays used in the treatment of rhinitis contain a steroidal agent, giving rise to fear of side effects when they are used frequently and continually. Accordingly, we undertook the development of a nasal spray containing oxaprozin, a nonsteroidal anti-inflammatory agent. Suitable discharge pressure and surfactants were determined by applying trial aerosols to human subjects in "feeling" tests to assess approval rating. Other tests showed that about 80% of the expelled oxaprozin was released into the nasal cavity, and that the chosen formulation caused only a low level of irritation to the nasal mucosa. Most of the aerosol particles were found to adhere to Kiesselbach's area and the frontal region of the inferior concha, which are the major areas where inflammation and nasal haemorrhage occur. When the nasal spray was administered to 50 patients, a sufficient therapeutic effect was achieved, especially in the treatment of nasal haemorrhage, and side effects have not yet been detected.

Administration, Intranasal↗

Studies on improvement of pharmaceutical preparations prescribed in hospitals. II: Study on pharmaceutical manufacturing of dibekacin sulfate gauze tampon.

A gauze tampon, which contains an ointment incorporating dibekacin sulfate, was prepared and investigated as a device to prevent bacterial infection after operation of chronic sinusitis. It was proved that no loss of potency occurred upon heat sterilization and that it was stable even after storage for a long period. This gauze tampon was easy to insert into the paranasal sinuses, achieving satisfactory therapeutic efficacy in terms of hemostasis and disinfection. No adverse reactions have been observed.

Adult↗

Studies on improvement of pharmaceutical preparations prescribed in hospitals. IV. Dibekacin sulfate viscous solution for treatment of mouth and throat wounds.

For the purpose of preventing suppuration of wounds of the oral cavity and throat, we attempted to develop a viscous solution of dibekacin sulfate (DKB) as a suitable medication. Solutions of different viscosity and antibacterial potency were prepared by mixing DKB, sodium carboxymethyl cellulose (CMC-Na), and water in varying proportions. Studies were then performed to ascertain relationships between the concentration of CMC-Na pH and viscosity, and between the viscosity and diffusion of DKB. The concentration of CMC-Na giving rise to optimal clinical efficacy was determined, and the concentration of DKB necessary for clinical treatment was estimated on the basis of the ionic binding constant between DKB and CMC-Na. As a result, the optimum CMC-Na concentration was found to be 2%, while the optimum DKB concentration was estimated to be 100 micrograms/ml.

Carboxymethylcellulose Sodium↗

Studies on improvement of pharmaceutical preparations prescribed in hospitals. V. Nifedipine hollow type suppository.

Nifedipine is a calcium antagonist used for the treatment of hypertension and angina pectoris. However, commercial nifedipine preparations are only available in forms suitable for oral administration, e.g. soft capsules and tablets. Therefore, we developed a suppository form in which the drug was incorporated into a hollow type suppository. The suppository preparation was administered to humans for evaluation of the clinical and commercial usefulness. It was as fast-acting as the soft capsule, but the blood concentration of nifedipine immediately after administration was lower than that seen with the soft capsule. It was considered to be superior to the soft capsule and similar to the tablet in terms of its long-acting effect. Thus, the hollow type suppository form of nifedipine should have useful clinical applications.

Adult↗