Search PubMed⌕ Search

Biomedical subjects

Wenping Hu

Publications and source records attributed to Wenping Hu.

11 recordsLinked to original sources
PubMed2006

High-performance air-stable n-type transistors with an asymmetrical device configuration based on organic single-crystalline submicrometer/nanometer ribbons.

High-performance air-stable n-type field-effect transistors based on single-crystalline submicro- and nanometer ribbons of copper hexadecafluorophthalocyanine (F(16)CuPc) were studied by using a novel device configuration. These submicro- and nanometer ribbons were synthesized by a physical vapor transport technique and characterized by the powder X-ray diffraction pattern and selected area electron diffraction pattern of transmission electron microscopy. They were found to crystallize in a structure different from that of copper phthalocyanine. These single-crystalline submicro- and nanometer ribbons could be in situ grown along the surface of Si/SiO(2) substrates during synthesis. The intimate contact between the crystal and the insulator surface generated by the "in situ growing process" was free from the general disadvantages of the handpicking process for the fabrication of organic single-crystal devices. High performance was observed in devices with an asymmetrical drain/source (Au/Ag) electrode configuration because in such devices a stepwise energy level between the electrodes and the lowest unoccupied molecular orbital of F(16)CuPc was built, which was beneficial to electron injection and transport. The field-effect mobility of such devices was calculated to be approximately 0.2 cm(2) V(-)(1) s(-)(1) with the on/off ratio at approximately 6 x 10(4). The performances of the transistors were air stable and highly reproducible.

Journal Article↗
PubMed2006

Controlling the growth of single crystalline nanoribbons of copper tetracyanoquinodimethane for the fabrication of devices and device arrays.

In this paper, (1) a simple and controllable method to synthesize single crystalline nanoribbons of CuTCNQ in a large area was demonstrated by using a physical and chemical vapor combined deposition technique. (2) Nanoribbons synthesized by this method were identified to belong to phase I. (3) Devices and device arrays of nanoribbons were in situ fabricated by this method using gap electrodes and gap electrode arrays. (4) Current-voltage characteristics of crystalline devices and device arrays of nanoribbons exhibited semiconductor properties, and this conclusion was further confirmed by the results of devices based on an individual nanoribbon or microribbon of CuTCNQ (phase I). The controllable synthesis of nanoribbons for the in situ fabrication of crystalline nanodevices and device arrays will be attractive for nanoelectronics. Moreover, semiconductor current-voltage characteristics of the nanoribbons will be beneficial to the understanding of CuTCNQ.

Journal Article↗
PubMed2006

A new morphology of copper 7,7,8,8-tetracyano-p-quinodimethane.

Morphology control is a long-standing problem that needs to be solved for making the switching mechanism of copper 7,7,8,8-tetracyano-p-quinodimethane (CuTCNQ) understood all the time, but up till now how many morphologies CuTCNQ possesses and which morphology should be responsible for the on/off switching phenomenon are still unclear. A new morphology of CuTCNQ, namely the tubular structure, has been obtained and characterized in our experiment, whose formation mechanism has also been investigated. Through characterizing, we can conclude that the tubular structure belongs to the phase I, which can be further confirmed by the electrical measurements. From the I-V plots, the carrier mobility of the tubular structure is estimated to be approximately 0.1 cm2 V-1 s-1, which suggests the potential application of CuTCNQ in devices.

Journal Article↗
PubMed2006

Electron transport through a self-assembled monolayer of thiol-end-functionalized tetraphenylporphines and metal tetraphenylporphines.

The monolayers of several thiol-end-functionalized tetraphenylphophines (SH-TPP) and metal tetraphenylporphines (SH-MTPP) were self-assembled on gold surfaces and identified by cyclic voltammetry (CV), electrochemical impedance spectroscopy, scanning electrochemical microscopy, and the contact angle. The CV peaks of the [Fe(CN)6]3-/ [Fe(CN)6]4- couple were used to identify the efficiency of electrons transferring through the self-assembled monolayer (SAM). The results suggested that SH-TPP and SH-MTPP could form high-quality SAMs on gold surfaces. The SAMs blocked electron transport from the gold electrode to solution. When the length of the thiol-end-link spacer (alkyl group) increased, the electron transport ability of the SAM decreased because of the increased insulator properties of the alkyl chain. With the insertion of metallic ions, the electron transport ability of the SAM of SH-MTPP increased compared to that of the SAM of SH-TPP, which was probably due to the fact that (i) the insertion of metallic ions changed the molecular structure and the molecular structure of SH-MTPP played an important role in electron transport through the SAM and (ii) the insertion of metallic ions increased the electron tunneling probability through the monolayer.

Journal Article↗
PubMed2006

Electron transport in self-assembled polymer molecular junctions.

A molecular junction of a poly(p-phenyleneethynylene)s derivative with thioacetate end groups (TA-PPE) was fabricated by self-assembling. Nanogap electrodes made by electroplating technique was used to couple thiol end groups of TA-PPE molecules. Room temperature current-voltage characteristics of the molecular junction exhibited highly periodic, repeatable, and identical stepwise features. First-principles calculations suggest that one possibility for the equidistant step is due to the opening of different conducting channels that corresponds to the unoccupied molecular orbitals of the polymer in the junction. It is interesting to see that an 18 nm long polymer is of quantized electronic structures and behaves like a quantum transport device.

Journal Article↗
PubMed2005

Spider's microstructure for sensing.

The spider is well known for sensing the movements of air and preys. Bionics of the spider based on this principle is being paid great attention by many researchers. Here, this paper presents some detailed organs of the spider to make an attempt to clarify the sensing mechanism of the spider from the point view of physical structure by scanning electron microscopy. And behavior characteristics concerning sensing action are observed by optical microscopy. Compared with structures, some novel features of sense movements in micro- and nano-scale size and corresponding possible models are presented. At the same time, simple structure analysis is made to explain and prove this hypothesis.

Animals↗
PubMed2005

A highly pi-stacked organic semiconductor for field-effect transistors based on linearly condensed pentathienoacene.

We present the synthesis and characterization of a fused-ring compound, dithieno[2,3-d:2',3'-d']thieno[3,2-b:4,5-b']dithiophene (pentathienoacene, PTA). In contrast to pentacene, PTA has a larger band gap than most semiconductors used in organic field-effect transistors (OFETs) and therefore is expected to be stable in air. The large pi-conjugated and planar molecular structure of PTA would also form higher molecular orders that are conductive for carrier transport. X-ray diffraction and atomic force microscopy experiments on its films show that the molecules stack in layers with their long axis upright from the surface. X-ray photoelectron spectroscopy suggests that there are no chemical bonds at the PTA/Au interface. OFETs based on the PTA have been constructed, and their performances as p-type semiconductors are also presented. A high mobility of 0.045 cm(2)/V s and an on/off ratio of 10(3) for a PTA OFET have been achieved, demonstrating the potential of PTA for application in future organic electronics.

Electric Conductivity↗
PubMed2005

Sorption of 243Am(III) to multiwall carbon nanotubes.

Carbon nanotubes have attracted great interest in multidisciplinary study since their discovery. Herein, radionuclide 243Am(III) sorption to uncapped multiwall carbon nanotubes (MWCNTs) was carried out at 20+/-2 degrees C in 0.01 and 0.1 M NaClO4 solutions. Effects of 243Am(III) solution concentration, ionic strength, and pH on 243Am(III) sorption to MWCNTs were also investigated. The sorption is strongly dependent on pH values and weakly dependent on the ionic strength in the experimental conditions. The results show that MWCNTs can adsorb 243Am(III) with extraordinarily high efficiency by forming very stable complexes. Chemisorption or chemicomplexation is the main mechanism of 243Am(III) sorption on the surface of MWCNTs. MWCNTs can be a promising candidate for the preconcentration and solidification of 243Am(III) or its analogue lanthanides and actinides from large volumes of aqueous solution, as required for remediation purposes, and perhaps also as a sorbent for the removal of heavy metal ions from the industry wastewater.

Actinoid Series Elements↗
PubMed2005

A self-assembled nano optical switch and transistor based on a rigid conjugated polymer, thioacetyl-end-functionalized poly(para-phenylene ethynylene).

A nanometer-scale optical switch and transistor were fabricated with thioacetyl-end-functionalized poly(para-phenylene ethynylene)s and Au nanogap electrodes by self-assembly. With photoirradiation, the switch can be switched on/off quickly with a switching ratio as high as 1000. Moreover, the device works well as a p-type transistor. With an increase in gate bias, strong conductance oscillation was observed in this self-assembled transistor (under low temperature 147 K), which is very likely due to single-electron charging oscillations arising from electron tunneling through the nanometer-scale transistor.

Journal Article↗
PubMed2003

Ecology of uncultivated Oscillospira species in the rumen of cattle, sheep, and reindeer as assessed by microscopy and molecular approaches.

The ecology of the uncultured, but large and morphologically conspicuous, rumen bacterium Oscillospira spp. was studied. Oscillospira-specific 16S rRNA gene sequences were detected in North American domestic cattle, sheep from Australia and Japan, and Norwegian reindeer. Phylogenetic analysis of the sequences obtained allowed definition of three operational taxonomic units within the Oscillospira clade. Consistent with this genetic diversity, we observed atypical smaller morphotypes by using an Oscillospira-specific fluorescence in situ hybridization probe. Despite the visual disappearance of typical large Oscillospira morphotypes, the presence of Oscillospira spp. was still detected by Oscillospira-specific PCR in the rumen of cattle and sheep. These observations suggest the broad presence of Oscillospira species in various rumen ecosystems with the level, and most likely the morphological form, dependent on diet. An ecological analysis based on enumeration of the morphologically conspicuous, large-septate form confirms that the highest counts are associated with the feeding of fresh forage diets to cattle and sheep and in two different subspecies of reindeer investigated.

Animal Feed↗