Search PubMed⌕ Search

Biomedical subjects

Weihong Tan

Publications and source records attributed to Weihong Tan.

At least 55 records · Page 3Linked to original sources

Monitoring nucleic acids using molecular beacons.

The ability to observe the dynamic of RNA in single living cells offers many exciting opportunities in biology and medicine. In the last few years, molecular beacons (MBs) have shown great potential in monitoring RNA synthesis, transportation, and localization with good sensitivity and selectivity. A hairpin structure probe, MB is a dual-labeled single stranded oligonucleotide that only fluoresces in the presence of target sequences. In this paper, the basic principle and design of MB will be described. The application of MB for RNA imaging in living cells will be reviewed. The limitations of MB for in vivo application will be identified. In the last section of the article, the efforts on designing better MBs for highly sensitive and selective RNA imaging will be discussed.

Animals↗

Protein-protein interaction studies based on molecular aptamers by affinity capillary electrophoresis.

Protein-DNA/protein-protein interactions play critical roles in many biological processes. We report here the investigation of protein-protein interactions using molecular aptamers with affinity capillary electrophoresis (ACE). A human alpha-thrombin binding aptamer was labeled with 6-carboxyfluorescein and exploited as a selective fluorescent probe for studying thrombin-protein interactions using capillary electrophoresis with laser-induced fluorescence. A 15-mer binding DNA aptamer can be separated into two peaks in CE that correspond to the linear aptamer (L-Apt) and the thrombin-binding G-quadruplex structure in the presence of K(+) or Ba(2+). In a bare capillary, the peak area of G-quadruplex aptamer (G-Apt) was found to decrease with the addition of thrombin while that of L-Apt remained unchanged. Even though the peak of the G-Apt/thrombin binding complex is broad due to a weaker binding affinity between aptamer and thrombin, we were still able to quantify the thrombin and anti-thrombin proteins (human anti-thrombin III, AT III) based on the peak areas of free G-Apt. The detection limits of thrombin and AT III were 9.8 and 2.1 nM, respectively. The aptamer-based competitive ACE assay has also been applied to quantify thrombin-anti-thrombin III interaction and to monitor this reaction in real time. The addition of poly(ethylene glycol) to the sample matrix stabilized the complex of the G-Aptthrombin. This assay can be used to study the interactions between thrombin and proteins that do not disrupt G-Apt binding property at Exosit I site of the thrombin. Our aptamer-based ACE assay can be an effective approach for studying protein-protein interactions and for analyzing binding site and binding constant information in protein-protein and protein-DNA interaction studies.

Aptamers, Peptide↗

Ultrasensitive detection of biomolecules with fluorescent dye-doped nanoparticles.

Fluorescent-labeled molecules have been used extensively for a wide range of applications in biological detection and diagnosis. A new form of highly luminescent and photostable nanoparticles was generated by doping the fluorescent dye tris(2'2-bipyridyl)dichlororuthenium(II)hexahydrate (Rubpy) inside silica material. Because thousands of fluorescent dye molecules are encapsulated in the silica matrix that also serves to protect Rubpy dye from photodamaging oxidation, the Rubpy-dye-doped nanoparticles are extremely bright and photostable. We have used these nanoparticles successfully in various fluorescence labeling techniques, including fluorescent-linked immunosorbent assay, immunocytochemistry, immunohistochemistry, DNA microarray, and protein microarray. By combining the high-intensity luminescent nanoparticles with the specificity of antibody-mediated recognition, ultrasensitive target detection has been achieved. In all cases, assay results clearly demonstrated the superiority of the nanoparticles over organic fluorescent dye molecules and quantum dots in probe labeling for sensitive target detection. These results demonstrate the potential to apply these newly developed fluorescent nanoparticles in various biodetection systems.

Fluorescent Dyes↗

TAT conjugated, FITC doped silica nanoparticles for bioimaging applications.

Water-in-oil (w/o) microemulsion synthesis of 70 nm size monodisperse TAT (a cell penetrating peptide, CPP) conjugated, FITC (fluorescein isothiocyanate) doped silica nanoparticles (TAT-FSNPs) is reported; human lung adenocarcinoma (A549) cells (in vitro) and rat brain tissue (in vivo) were successfully labeled using TAT-FSNPs.

Animals↗

A rapid bioassay for single bacterial cell quantitation using bioconjugated nanoparticles.

The rapid and sensitive determination of pathogenic bacteria is extremely important in biotechnology, medical diagnosis, and the current fight against bioterrorism. Current methods either lack ultrasensitivity or take a long time for analysis. Here, we report a bioconjugated nanoparticle-based bioassay for in situ pathogen quantification down to single bacterium within 20 min. The bioconjugated nanoparticle provides an extremely high fluorescent signal for bioanalysis and can be easily incorporated with biorecognition molecules, such as antibody. The antibody-conjugated nanoparticles can readily and specifically identify a variety of bacterium, such as Escherichia coli O157:H7, through antibody-antigen interaction and recognition. The single-bacterium-detection capability within 20 min has been confirmed by the plate-counting method and realized by using two independent optical techniques. The two detection methods correlated extremely well. Furthermore, we were able to detect multiple bacterial samples with high throughput by using a 384-well microplate format. To show the usefulness of this assay, we have accurately detected 1-400 E. coli O157 bacterial cells in spiked ground beef samples. Our results demonstrate the potential for a broad application of bioconjugated nanoparticles in practical biotechnological and medical applications in various biodetection systems. The ultimate power of integrating bionanotechnology into complex biological systems will emerge as a revolutionary tool for ultrasensitive detection of disease markers and infectious agents.

Animals↗

Monitoring molecular beacon/DNA interactions using atomic force microscopy.

The molecular beacon (MB) is a new fluorescence probe containing a single-stranded oligonucleotide with a probe sequence embedded in complementary sequences that form a hairpin stem. Due to the inherent fluorescent signal transduction mechanism, an MB functions as a sensitive probe with a high signal-to-background ratio for real-time monitoring and provides a variety of exciting opportunities in DNA, RNA, and protein studies. To better understand the properties of MBs, the specific interactions between MB and target DNA (complementary and one-base mismatch) have been directly investigated by atomic force microscopy. The interaction force between a linear DNA probe and the target DNA was also detected and compared to that between MB and target DNA. The results demonstrate the high specificity of the MB/target DNA compared to the linear DNA/target DNA interaction.

DNA↗

Optimization of dye-doped silica nanoparticles prepared using a reverse microemulsion method.

Fluorescent labeling based on silica nanoparticles facilitates unique applications in bioanalysis and bioseparation. Dye-doped silica nanoparticles have significant advantages over single-dye labeling in signal amplification, photostability and surface modification for various biological applications. We have studied the formation of tris(2,2'-bipyridyl)dichlororuthenium(II) (Ru(bpy)) dye-doped silica nanoparticles by ammonia-catalyzed hydrolysis of tetraethyl orthosilicate (TEOS) in water-in-oil microemulsion. The fluorescence spectra, particle size, and size distribution of Ru(bpy) dye-doped silica nanoparticles were examined as a function of reactant concentrations (TEOS and ammonium hydroxide), nature of surfactant molecules, and molar ratios of water to surfactant (R) and cosurfactant to surfactant (p). The particle size and fluorescence spectra were dependent upon the type of microemulsion system chosen. The particle size was found to decrease with an increase in concentration of ammonium hydroxide and increase in water to surfactant molar ratio (R) and cosurfactant to surfactant molar ratio (p). This optimization study of the preparation of dye-doped silica nanoparticles provides a fundamental knowledge of the synthesis and optical properties of Ru(bpy) dye-doped silica nanoparticles. With this information, these nanoparticles can be easily manipulated, with regard to particle size and size distribution, and bioconjugated as needed for bioanalysis and bioseparation applications.

Coloring Agents↗

Molecular-beacon-based array for sensitive DNA analysis.

Molecular beacon (MB) DNA probes provide a new way for sensitive label-free DNA/protein detection in homogeneous solution and biosensor development. However, a relatively low fluorescence enhancement after the hybridization of the surface-immobilized MB hinders its effective biotechnological applications. We have designed new molecular beacon probes to enable a larger separation between the surface and the surface-bound MBs. Using these MB probes, we have developed a DNA array on avidin-coated cover slips and have improved analytical sensitivity. A home-built wide-field optical setup was used for imaging the array. Our results show that linker length, pH, and ionic strength have obvious effects on the performance of the surface-bound MBs. The fluorescence enhancement of the new MBs after hybridization has been increased from 2 to 5.5. The MB-based DNA array could be used for DNA detection with high sensitivity, enabling simultaneous multiple-target bioanalysis in a variety of biotechnological applications.

Base Sequence↗

DNA-functionalized nanotube membranes with single-base mismatch selectivity.

We describe synthetic membranes in which the molecular recognition chemistry used to accomplish selective permeation is DNA hybridization. These membranes contain template-synthesized gold nanotubes with inside diameters of 12 nanometers, and a "transporter" DNA-hairpin molecule is attached to the inside walls of these nanotubes. These DNA-functionalized nanotube membranes selectively recognize and transport the DNA strand that is complementary to the transporter strand, relative to DNA strands that are not complementary to the transporter. Under optimal conditions, single-base mismatch transport selectivity can be obtained.

Base Pair Mismatch↗

A two-dimensional imaging biosensor to monitor enhanced brain glutamate release stimulated by nicotine.

In this study, we have imaged and monitored real-time release of neurotransmitter glutamate from mouse brain slices stimulated by nicotine and physiological salts using a newly developed two-dimensional (2D) imaging biosensor. Nicotine, the addictive substance contained in cigarettes and other tobacco baring products, affects human body through interactions with both central and peripheral nervous system receptors and exists in various concentrations in body organs including the brain. The 2D imaging biosensor, designed for sensitive glutamate monitoring, is prepared through the use of a flat silica plate that is covalently attached with an enzyme, glutamate dehydrogenase (GDH). The 2D imaging biosensor can spatially resolve glutamate release and has a detection limit of 40 nM in detecting glutamate release from glutaminergic neurons in the brain slices. Using this biosensor, we have shown that the administration of nicotine (50 nM) on the brain slice stimulates repetitive glutamate release. To the best of our knowledge, this is the first time that a biosensor was used to define the vital role of nicotine in glutamate release. Physiological salts such as KCl and CaCl(2) have also been used to characterize the biosensor in measuring glutamate release. It is found in this study that nicotine stimulation is much more potent than physiological salts. The real-time detection of newly released glutamate from mouse brain slices clearly demonstrates the feasibility of the two-dimensional glutamate biosensor for real-time monitoring of dynamic glutamate release from living specimen.

Animals↗

Adeno-associated virus Rep78/Rep68 promotes localized melting of the rep binding element in the absence of adenosine triphosphate.

We have applied fluorescence anisotropy and molecular beacon fluorescence methods to study the interactions between the Adeno-associated virus Rep78/Rep68 protein and the 23-bp Rep binding element (RBE). Rep78/Rep68 stably interacted with both the single- and double-stranded conformations of the RBE, but the interaction mechanisms of single- and double-stranded DNA appeared to be fundamentally different. The stoichiometry of Rep78 association with both the separate top and bottom strands of the RBE was 1:1, and the relative dissociation constant (K(D)) values of these associations were calculated to be 2.3x10(-8) and 3.2x10(-8) M, respectively. In contrast, the stoichiometry of Rep78 association with the double-stranded RBE was 2:1, and the dissociation constant was determined to be 4.2x10(-15) M(2). Moreover, Rep78/Rep68 interaction with the 23-bp duplex RBE appeared to cause localized melting of the double-stranded DNA substrate in the absence of adenosine triphosphate (ATP). This melting activity showed slower kinetics than binding and may contribute to the initiation of ATP-dependent Rep78 helicase activity.

Adenosine Triphosphate↗

Bionanotechnology based on silica nanoparticles.

We have developed uniform core/shell nanoparticles, consisting of a silica layer coating and pigments or magnetite core, using a water-in-oil microemulsion method. The nanoparticles are highly luminescent and photostable with the size ranging from 5 nm to 400 nm. Bioconjugation of these silica nanoparticles adds unique biofunctions with various molecules such as enzymes, antibodies, and DNA molecules. Significant advantages have been shown in using bioconjugated nanoparticles for biosensing and bioimaging, such as cell staining, DNA detection and separation, rapid single bacterium detection, and biotechnological application in DNA protection.

Animals↗

Functionalized nanoparticles for liquid atmospheric pressure matrix-assisted laser desorption/ionization peptide analysis.

Nanoparticles for the extraction of peptides and subsequent analysis using atmospheric pressure matrix-assisted laser desorption/ionization (APMALDI) have been evaluated. The atmospheric pressure source allows for particles to be directly introduced in the liquid matrix, minimizing sample loss and analysis time. Described in this work are two sample preparation procedures for liquid APMALDI analysis: a C18 functionalized silica nanoparticle for hydrophobic extractions, and an aptamer functionalized magnetite core nanoparticle for rapid, affinity extractions. The C18 particles provide a non-selective support for rapid profiling applications, while the aptamer particles are directed towards reducing the complexity in biological samples. The aptamer functionalized particles provide a more selective analyte-nanoparticle interaction whereby the tertiary structure of the analyte becomes more critical to the extraction. In both cases, the liquid APMALDI matrix provides a support for ionization, and acts as the releasing agent for the analyte-particle interaction. Additionally, analyte enrichment was possible due to the large surface-to-volume ratio of the particles. The experiments conducted with functionalized nanoparticles, in an atmospheric pressure liquid matrix, present a basis for further methodologies and utilities of silica nanoparticles to be developed.

Adsorption↗

Molecular beacons.

This opinion covers the field of molecular beacons (MBs), in which nucleic acids are molecularly engineered to have unique functions for the investigation of biomolecules. Molecular beacons have been used in a variety of formats, and this review discusses four: first, in vitro RNA and DNA monitoring; second, biosensors and biochips based on MBs; third, real-time monitoring of genes and gene expression in living systems; and finally, the next generation of molecular beacons that will be highly useful for studies with proteins, molecular beacon aptamers. These unique applications have shown that MBs holds great potential in genomics and proteomics where real-time molecular recognition with high sensitivity and excellent specificity is critical.

Biosensing Techniques↗

A novel fluorescent label based on organic dye-doped silica nanoparticles for HepG liver cancer cell recognition.

In this paper, we report a method for the recognition of HepG liver cancer cells with the use of a novel fluorescent label based on organic dye-doped fluorescent silica nanoparticles. The novel organic dye-doped silica nanoparticles are prepared with a water-in-oil microemulsion technique. The silica network is produced by the controlled synchronous hydrolysis of tetraethoxysilane and 3-amino-propyltriethoxysilane (APTES). The organic dye fluorescein isothiocyanate is doped inside as a luminescent signaling element, through covalent bonding to the amino group of APTES. The organic dye-doped core-shell nanoparticles are highly luminescent and exhibit minimal dye leaching and excellent photostability. A novel fluorescent label method based on biological fluorescent nanoparticles has been developed. The dye-doped fluorescent silica nanoparticles are covalently immobilized with anti-human liver cancer monoclonal antibody HAb18. We have used antibody-labeled fluorescent nanoparticles to recognize HepG liver cancer cells. It has been observed that the bioassay based on the organic dye-doped nanoparticles can identify the target cells selectively and efficiently. The fluorescent nanoparticle label also exhibits high photostability.

Antibodies, Monoclonal↗

Assembly of silica nanoparticles for two-dimensional nanomaterials.

To realize the great potential of nanoparticles as new materials for biomedical applications, the nanoparticles will have to be assembled in such a way that the newly created assembly will have unique properties that conventional materials do not possess. This will enable nanomaterials to be used for many novel applications. We have attempted to assemble silica nanoparticles to create a two-dimensional nanomaterial, which might be useful for biosensor and biochip production. The silica nanoparticles are synthesized and assembled in a monolayer fashion through the use of halogenated silanes. Photolithography techniques are used to pattern the glass surface prior to nanoparticle attachment. The concentration of the silica nanoparticles in the solution controls the surface coverage of nanoparticles on the glass surface. Different patterned silica arrays can be made with controlled surface coverage. The nanoparticle-covered surface is successfully tested for surface-enhanced enzymatic reactivity for the detection of a neurotransmitter, glutamate. This report demonstrates the feasibility of assembling nanoparticles for biosensor development.

Biosensing Techniques↗

Luminescent nanoparticle probes for bioimaging.

Bioimaging with luminescent nanoparticle probes have recently attracted widespread interest in biology and medicine. In comparison with commonly used organic dyes, luminescent nanoparticles are better in terms of photostability and sensitivity. These optical features of nanoparticle probes are critical for real time tracking and monitoring of biological events in the cellular level, which may not be accomplished using regular fluorescent dyes. Nanoparticle probes are also shown highly suitable for immunoassay and other diagnostic and therapeutic applications. In this article, we describe a variety of optical nanoparticle probes such as quantum dots, metal nanoparticles, dye-doped nanoparticles etc. for bioimaging applications.

Fluorescent Dyes↗