Search PubMed⌕ Search

Biomedical subjects

W Wriggers

Publications and source records attributed to W Wriggers.

16 recordsLinked to original sources

Actin depolymerizing factor stabilizes an existing state of F-actin and can change the tilt of F-actin subunits.

Proteins in the actin depolymerizing factor (ADF)/cofilin family are essential for rapid F-actin turnover, and most depolymerize actin in a pH-dependent manner. Complexes of human and plant ADF with F-actin at different pH were examined using electron microscopy and a novel method of image analysis for helical filaments. Although ADF changes the mean twist of actin, we show that it does this by stabilizing a preexisting F-actin angular conformation. In addition, ADF induces a large ( approximately 12 degrees ) tilt of actin subunits at high pH where filaments are readily disrupted. A second ADF molecule binds to a site on the opposite side of F-actin from that of the previously described ADF binding site, and this second site is only largely occupied at high pH. All of these states display a high degree of cooperativity that appears to be an integral part of F-actin.

Actin Depolymerizing Factors↗

Kinesin has three nucleotide-dependent conformations. Implications for strain-dependent release.

Although crystallographic information is available on several nucleotide-induced states in myosin, little is known about the corresponding structural changes in kinesin, since a crystallographic model is only available for the kinesin:ADP complex. This makes it difficult to characterize at a molecular level the structural changes that occur in this motor through the course of its ATPase cycle. In this study, we report on the production of a series of single tryptophan mutants of a monomeric human kinesin motor domain, which demonstrate nucleotide-dependent changes in microtubule affinity that are similar to wild type. We have used these mutations to measure intramolecular distances in both strong and weak binding states, using fluorescence resonance energy transfer. This work provides direct evidence that movement of the switch II loop and helix are essential to mediate communication between the catalytic and microtubule binding sites, evidence that is supported as well by molecular modeling. Kinetic studies of fluorescent nucleotide binding to these mutants are consistent with these distance changes, and demonstrate as well that binding of ADP produces two structural transitions, neither of which are identical to that produced by the binding of ATP. This study provides a basis for understanding current structural models of the kinesin mechanochemical cycle.

Adenosine Diphosphate↗

Cross-linking constraints on F-actin structure.

The DNase I binding loop (residues 38-52), the hydrophobic plug (residues 262-274), and the C terminus region are among the structural elements of monomeric (G-) actin proposed to form the intermonomer interface in F-actin. To test the proximity and interactions of these elements and to provide constraints on models of F-actin structure, cysteine residues were introduced into yeast actin either at residue 41 or 265. These mutations allowed for specific cross-linking of F-actin between C41 and C265, C265 and C374, and C41 and C265 using dibromobimane and disulfide bond formation. The cross-linked products were visualized on SDS-PAGE and by electron microscopy. Model calculations carried out for the cross-linked F-actins revealed that considerable flexibility or displacement of actin residues is required in the disulfide cross-linked segments to fit these filaments into model F-actin structures. The calculated, cross-linked structures showed a better fit to the Holmes rather than the refined Lorenz model of F-actin. It is predicted on the basis of such calculations that image reconstruction of electron micrographs of disulfide cross-linked C41-C374 F-actin should provide a conclusive test of these two similar models of F-actin structure.

Actins↗

Domain motions of EF-G bound to the 70S ribosome: insights from a hand-shaking between multi-resolution structures.

Molecular modeling and information processing techniques were combined to refine the structure of translocase (EF-G) in the ribosome-bound form against data from cryoelectron microscopy (cryo-EM). We devised a novel multi-scale refinement method based on vector quantization and force-field methods that gives excellent agreement between the flexibly docked structure of GDP. EF-G and the cryo-EM density map at 17 A resolution. The refinement reveals a dramatic "induced fit" conformational change on the 70S ribosome, mainly involving EF-G's domains III, IV, and V. The rearrangement of EF-G's structurally preserved regions, mediated and guided by flexible linkers, defines the site of interaction with the GTPase-associated center of the ribosome.

Computer Simulation↗

His(73), often methylated, is an important structural determinant for actin. A mutagenic analysis of HIS(73) of yeast actin.

His(73), has been proposed to regulate the release of P(i) from the interior of actin following polymerization-dependent hydrolysis of bound ATP. Although it is a 3-methylhistidine in the vast majority of actins, His(73) is unmethylated in S. cerevisiae actin. We mutated His(73) in yeast actin to Arg, Lys, Ala, Gln, and Glu and detected no altered phenotypes associated with the mutations in vivo. However, they significantly affect actin function in vitro. Substitution of the more basic residues resulted in enhanced thermal stability, decreased rate of nucleotide exchange, and decreased susceptibility to controlled proteolysis relative to wild-type actin. The opposite effects are observed with the neutral and anionic substitutions. All mutations reduced the rate of polymerization. Molecular dynamics simulations predict a new conformation for the His(73) imidazole in the absence of a methyl group. It also predicts that Arg(73) tightens and stabilizes the actin and that Glu(73) causes a rearrangement of the bottom of actin's interdomain cleft leading possibly to our observed destabilization of actin. Considering the exterior location of His(73), this work indicates a surprisingly important role for the residue as a major structural determinant of actin and provides a clue to the impact caused by methylation of His(73).

Actins↗

Investigating a back door mechanism of actin phosphate release by steered molecular dynamics.

In actin-based cell motility, phosphate (Pi) release after ATP hydrolysis is an essential biochemical process, but the actual pathway of Pi separation from actin is not well understood. We report a series of molecular dynamics simulations that induce the dissociation of Pi from actin. After cleavage from ATP, the singly protonated phosphate (HPO4(2-)) rotates about the ADP-associated Ca2+ ion, turning away from the negatively charged ADP towards the putative exit near His73. To reveal the microscopic processes underlying the release of Pi, adhesion forces were measured when pulling the substrate out of its binding pocket. The results suggest that the separation from the divalent cation is the rate-limiting step in Pi release. Protonation of HPO4(2-) to H2PO4- lowers the electrostatic barrier during Pi liberation from the ion. The simulations revealed a propensity of charged His73+ to form a salt bridge with HPO4(2-), but not with H2PO4-. His73 stabilizes HPO4(2-) and, thereby, inhibits rapid Pi release from actin. Arg177 remains attached to Pi along the putative back door pathway, suggesting a shuttle function that facilitates the transport of Pi to a binding site on the protein surface.

Actins↗

Self-organizing neural networks bridge the biomolecular resolution gap.

Topology-representing neural networks are employed to generate pseudo-atomic structures of large-scale protein assemblies by combining high-resolution data with volumetric data at lower resolution. As an application example, actin monomers and structural subdomains are located in a three-dimensional (3D) image reconstruction from electron micrographs. To test the reliability of the method, the resolution of the atomic model of an actin polymer is lowered to a level typically encountered in electron microscopic reconstructions. The atomic model is restored with a precision nine times the nominal resolution of the corresponding low-resolution density. The presented self-organizing computing method may be used as an information-processing tool for the synthesis of structural data from a variety of biophysical sources.

Actins↗

Cofilin and gelsolin segment-1: molecular dynamics simulation and biochemical analysis predict a similar actin binding mode.

An understanding of the actin-depolymerizing function attributed to members of the ADF/cofilin/destrin superfamily requires a structural model of these proteins in complex with actin. As a step toward defining actin-cofilin interactions, the complex of yeast cofilin with monomeric actin was predicted, starting with the actin-gelsolin segment-1 binding mode recently suggested for the actin-destrin complex. After refinement by molecular dynamics simulation, the structure of cofilin converged in a new binding mode that required only minimal changes induced in the actin-cofilin interface. The predicted complex exhibits strong interactions between the N termini of actin and cofilin, mediated by a salt bridge of cofilin Arg3 with actin Asp1. The forming of this salt bridge could be prevented by the phosphorylation of cofilin Ser4, which is believed to inhibit cofilin depolymerization activity. Recent mutagenesis studies, crosslinking experiments and peptide binding studies are consistent with the predicted model of the actin-cofilin complex. The structural homology between cofilin and gelsolin segment-1 binding to actin was confirmed experimentally by two types of competitive binding assays.

Actin Depolymerizing Factors↗

Nucleotide-dependent movements of the kinesin motor domain predicted by simulated annealing.

The structure of an ATP-bound kinesin motor domain is predicted and conformational differences relative to the known ADP-bound form of the protein are identified. The differences should be attributed to force-producing ATP hydrolysis. Candidate ATP-kinesin structures were obtained by simulated annealing, by placement of the ATP gamma-phosphate in the crystal structure of ADP-kinesin, and by interatomic distance constraints. The choice of such constraints was based on mutagenesis experiments, which identified Gly-234 as one of the gamma-phosphate sensing residues, as well as on structural comparison of kinesin with the homologous nonclaret disjunctional (ncd) motor and with G-proteins. The prediction of nucleotide-dependent conformational differences reveals an allosteric coupling between the nucleotide pocket and the microtubule binding site of kinesin. Interactions of ATP with Gly-234 and Ser-202 trigger structural changes in the motor domain, the nucleotide acting as an allosteric modifier of kinesin's microtubule-binding state. We suggest that in the presence of ATP kinesin's putative microtubule binding regions L8, L12, L11, alpha4, alpha5, and alpha6 form a face complementary in shape to the microtubule surface; in the presence of ADP, the microtubule binding face adopts a more convex shape relative to the ATP-bound form, reducing kinesin's affinity to the microtubule.

Adenosine Diphosphate↗

Structure and dynamics of calmodulin in solution.

To characterize the dynamic behavior of calmodulin in solution, we have carried out molecular dynamics (MD) simulations of the Ca2+-loaded structure. The crystal structure of calmodulin was placed in a solvent sphere of radius 44 A, and 6 Cl- and 22 Na+ ions were included to neutralize the system and to model a 150 mM salt concentration. The total number of atoms was 32,867. During the 3-ns simulation, the structure exhibits large conformational changes on the nanosecond time scale. The central alpha-helix, which has been shown to unwind locally upon binding of calmodulin to target proteins, bends and unwinds near residue Arg74. We interpret this result as a preparative step in the more extensive structural transition observed in the "flexible linker" region 74-82 of the central helix upon complex formation. The major structural change is a reorientation of the two Ca2+-binding domains with respect to each other and a rearrangement of alpha-helices in the N-terminus domain that makes the hydrophobic target peptide binding site more accessible. This structural rearrangement brings the domains to a more favorable position for target binding, poised to achieve the orientation observed in the complex of calmodulin with myosin light-chain kinase. Analysis of solvent structure reveals an inhomogeneity in the mobility of water in the vicinity of the protein, which is attributable to the hydrophobic effect exerted by calmodulin's binding sites for target peptides.

Binding Sites↗

Stability and dynamics of G-actin: back-door water diffusion and behavior of a subdomain 3/4 loop.

Molecular dynamics simulations have been performed on solvated G-actin bound to ADP and ATP, starting with the crystal structure of the actin-DNase 1 complex, including a Ca2+ or Mg2+ ion at the high-affinity divalent cation-binding site. Water molecules have been found to enter the nucleotide-binding site (phosphate vicinity) along two pathways, from the side where the nucleotide base is exposed to water, as well as from the opposite side. The water channels suggest a "back-door" mechanism for ATP hydrolysis in which the phosphate is released to a side opposite that of nucleotide binding and unbinding. The simulations also reveal a propensity of G-actin to alter its crystallographic structure toward the filamentous structure. Domain movement closes the nucleotide cleft, the movement being more pronounced for bound Mg2+. The conformational change is interpreted as a response of the system to missing water molecules in the crystal structure. The structures arising in the simulations, classified according to nucleotide cleft separation and radius of gyration of the protein, fall into two distinct clusters: a cluster of states that are similar to the G-actin crystal structure, and a cluster of states with small cleft separation and with the subdomain 3/4 loop 264-273 detached from the protein. The latter states resemble the putative filamentous structure of actin, in which the loop connects the two strands of the actin filament.

Actins↗

Predicting the structure of apolipoprotein A-I in reconstituted high-density lipoprotein disks.

In reconstituted high-density lipoproteins, apolipoprotein A-I and phosphatidylcholines combine to form disks in which the amphipathic alpha-helices of apolipoprotein A-1 bind to the edge of a lipid bilayer core, shielding the hydrophic lipid tails from the aqueous environment. We have employed experimental data, sequence analysis, and molecular modeling to construct an atomic model of such a reconstituted high-density lipoprotein disk consisting of two apolipoprotein A-I proteins and 160 palmitoyloleoylphosphatidylcholine lipids. The initial globular domain (1-47) of apolipoprotein A-I was excluded from the model, which was hydrated with an 8-A shell of water molecules. Molecular dynamics and simulated annealing were used to test the stability of the model. Both head-to-tail and head-to-head forms of a reconstituted high-density lipoprotein were simulated. In our simulations the protein contained and adhered to the lipid bilayer while providing good coverage of the lipid tails.

Amino Acid Sequence↗

Protein domain movements: detection of rigid domains and visualization of hinges in comparisons of atomic coordinates.

The activity of many proteins induces conformational transitions by hinge-bending, which involves the movement of relatively rigid parts of a protein about flexible joints. We present an algorithm to identify and visualize the movements of rigid domains about common hinges in proteins. In comparing two structures, the method partitions a protein into domains of preserved geometry. The domains are extracted by an adaptive selection procedure using least-squares fitting. The user can maintain the spatial connectivity of the domains and filter significant structural differences (domain movements) from noise in the compared sets of atomic coordinates. The algorithm subsequently characterizes the relative movements of the found domains by effective rotation axes (hinges). The method is applied to several known instances of domain movements in protein structures, namely, in lactoferrin, hexokinase, actin, the extracellular domains of human tissue factor, and the receptor of human growth factor. The results are visualized with the molecular graphics package VMD (Humphrey et al., J. Mol. Graphics 14(1):33-38, 1996). Applications of the algorithm to the analysis of conformational changes in proteins and to biomolecular docking are discussed.

Actins↗

Situs: A package for docking crystal structures into low-resolution maps from electron microscopy.

Three-dimensional image reconstructions of large-scale protein aggregates are routinely determined by electron microscopy (EM). We combine low-resolution EM data with high-resolution structures of proteins determined by x-ray crystallography. A set of visualization and analysis procedures, termed the Situs package, has been developed to provide an efficient and robust method for the localization of protein subunits in low-resolution data. Topology-representing neural networks are employed to vector-quantize and to correlate features within the structural data sets. Microtubules decorated with kinesin-related ncd motors are used as model aggregates to demonstrate the utility of this package of routines. The precision of the docking has allowed for the extraction of unique conformations of the macromolecules and is limited only by the reliability of the underlying structural data.

Animals↗

Using situs for flexible and rigid-body fitting of multiresolution single-molecule data.

We describe here a set of multiresolution visualization and docking procedures that we refer to as the Situs package. The package was developed to provide an efficient and robust method for the fitting of atomic structures into low-resolution data. The current release was optimized specifically for the visualization and docking of single molecules. A novel 3D graphics viewer, volslice3d, was developed for the package to provide an immersive virtual reality environment for measuring and rendering volumetric data sets. The precision of single-molecule, rigid-body docking was tested on simulated (noise-free) low-resolution density maps. For spatial resolutions near 20 A typically arising in electron microscopy image reconstructions, a docking precision on the order of 1 A can be achieved. The shape-matching score captured the correct solutions in all 10 trial cases and was sufficiently stringent to yield unique matches in 8 systems. Novel routines were developed for the flexible docking of atomic structures whose shape deviates from the corresponding low-resolution shape. Test calculations on isoforms of actin and lactoferrin demonstrate that the flexible docking faithfully reproduces conformational differences with a precision < 2 A if atomic structures are locally conserved.

Actins↗