Search PubMed⌕ Search

Biomedical subjects

W Saenger

Publications and source records attributed to W Saenger.

At least 163 records · Page 9Linked to original sources

Three-dimensional structure of the ribonuclease T1 2'-GMP complex at 1.9-A resolution.

The complex formed between the enzyme ribonuclease T1 (EC 3.1.27.3) and its specific inhibitor 2'-guanylic acid (2'-GMP) has been refined to R = 0.180 using x-ray diffraction data to 1.9-A resolution. The protein molecule displays a compact fold; a 4.5 turn alpha-helix packed over an antiparallel beta-pleated sheet shields most of the hydrophobic interior of the protein against the solvent. The extended pleated sheet structure of ribonuclease T1 is composed of three long and four short strands building up a two-stranded minor beta-sheet near the amino terminus and a five-stranded major sheet in the interior of the protein molecule. In the complex with ribonuclease T1, the inhibitor 2'-guanylic acid adopts the syn-conformation and C2'-endo sugar pucker. Binding of the nucleotide is mainly achieved through amino acid residues 38-46 of the protein. The catalytically active amino acid residues of ribonuclease T1 (His40, Glu58, Arg77, and His92) are located within the major beta-sheet which, as evident from the analysis of atomic temperature factors, provides an environment of minimal local mobility. The geometry of the active site is consistent with a mechanism for phosphodiester hydrolysis where, in the transesterification step, His40 and/or Glu58 act as a general base toward the ribose 2'-hydroxyl group and His92, as a general acid, donates a proton to the leaving 5'-hydroxyl group.

Endoribonucleases↗

The enzymatic activity of proteinase K is controlled by calcium.

The fungal proteinase K (EC 3.4.21.14) is a very potent unusually stable member of the subtilisin family. Its X-ray structure determined at 0.15-nm resolution shows two bound Ca2+ ions. Ca1 is in near-ideal pentagonal bipyramidal configuration with Asp200 carboxylate and Pro175 peptide C = O in an apical, and Val177 peptide C = O and four water molecules in an equatorial position, whereas Ca2 displays incomplete octahedral coordination with the carboxylate of Asp260, the peptide C = O of Val16 and the two water molecules. Scatchard analysis of the titration of Ca2+-free proteinase K with Ca2+ yields a single dissociation constant (7.6 +/- 2.5) x 10(-8) M associated with the tightly bound Ca1 whereas Ca2 is so weakly bound that it cannot be titrated. If proteinase K is depleted of Ca2+ by treatment with EDTA, followed by gel filtration, its enzymatic activity drops within 6 h to 20% of its original value, without autolysis. Addition of excess Ca2+ immediately raises the residual activity to 28%, but full activity is not achieved. Removal of Ca2+ triggers a conformational change of the substrate recognition site because there is a direct connection, via secondary structure hydrogen bonds, between the Ca1 binding site and the substrate-recognition site. This is indicated further by circular dichroism and fluorescence-spectroscopic data, and by reversed-phase FPLC, carried out in the presence and absence of Ca2+, but the overall structure of the enzyme is not affected. Depletion of Ca2+ also influences binding of longer peptide inhibitors of the chloromethane type, it increases the rate of autolysis after about 48 h, it reduces the thermal stability (measured by activity tests from 65 degrees C to 46 degrees C), and it enhances the deactivation by 8 M urea which inactivates to only 65%, whereas sodium dodecyl sulfate totally inactivates at a concentration of 12.5%.

Calcium↗

Conformational differences between alpha-cyclodextrin in aqueous solution and in crystalline form. A molecular dynamics study.

The computer simulation technique of molecular dynamics is a powerful tool to delineate the conformational differences between a molecule in different environments. As an illustration, the difference between an alpha-cyclodextrin molecule in aqueous solution and in crystalline form is determined. Two molecular dynamics simulations are compared. In one simulation, one alpha-cyclodextrin form in a "truncated octahedron box" containing 611 water molecules is simulated over 90 picoseconds to mimic the solution structure. In the other simulation, the crystalline form is modelled by a molecular dynamics simulation of four unit cells in space group P2(1)2(1)2(1) containing 16 alpha-cyclodextrin molecules and 96 water molecules over a period of 15 picoseconds. The solution structure of alpha-cyclodextrin deviates by about 0.1 nm from that in the crystal and shows twice as much mobility of the atoms. The experimentally observed twist of glucose unit 5 out of alignment with the other five glucose units in the alpha-cyclodextrin torus that is present in the crystal simulation, disappears in the simulation in solution, but the glucosidic torsion angles around the ring remain asymmetric. The hydrogen-bonding patterns in crystal and in solution are rather different. This means that in a crystal structure, the molecule and its (hydration) hydrogen-bonding scheme represent only one static minimum energy picture, whereas the molecular dynamics simulations yield a description of all the many hydrogen-bonding configurations that can occur in solution.

Animals↗

Molecular dynamics simulations of ribonuclease T1: analysis of the effect of solvent on the structure, fluctuations, and active site of the free enzyme.

Molecular dynamics simulations were performed on ribonuclease T1 (RNase T1; EC 3.1.27.3) to determine a structure for the free enzyme. Simulations starting with the X-ray coordinates for the 2'GMP-RNase T1 complex were done in vacuo and with an 18-A water ball around the active site using stochastic boundary conditions to understand the influence of water on both the structure and fluctuations of the enzyme. Removal of 2'GMP caused structural changes in the loop regions, including those directly interacting with the bound inhibitor in the crystal structure, while regions of secondary structure were less affected. The presence of solvent in the simulation damped the structural changes observed, which may be related to the use of full charges in both simulations. Fluctuations were also affected by the water, which generally increased both at the surface and in the interior of the protein. The active site in vacuo collapsed upon itself, forming a number of protein-protein hydrogen bonds leading to larger structural changes and lowered fluctuations while the presence of water kept the active site open, minimized structural changes, and increased fluctuations. Such fluctuations in the active site may be important for the binding of inhibitors or substrates to the enzyme. Lastly, results from the water simulation allow the prediction of a motion for a hypothetical tryptophan at position 45, which can ultimately be tested experimentally via time-resolved fluorescence using a site-specific mutant of the enzyme.

Aspergillus oryzae↗

Autolysis and inhibition of proteinase K, a subtilisin-related serine proteinase isolated from the fungus Tritirachium album Limber.

The activity of proteinase K (EC 3.4.21.14), a subtilisin-related serine proteinase, was assayed with azoalbumin that showed non-expected behavior in substrate saturation curve because of interaction between albumin molecules. Succinyl-(Ala)n-p-nitroanilide with n = 2 and 3, yielded specific activities of 3.5, 13 units/mg protein, respectively, reflecting a chain length dependence. The influence of peptide chain length on binding to proteinase K was also observed using mono- and dipeptide chloromethyl ketone inhibitors. They showed a maximum inhibition. They showed a maximum inhibition of proteinase K in solution of only about 50% even at a more than 20-fold molar excess. With the above substrates, the Vmax is not affected in presence of 10, 20 and 30% methanol, but the Km differs remarkably, suggesting competitive inhibition. The activity of proteinase K shows a maximum at 37 degrees C, and a temperature profile with more than 80% maximum activity in the range 20-60 degrees C. Autolysis of the enzyme is observed during sample preparation for SDS-gel electrophoresis and at low concentration (0.01 mg/ml) in aqueous solution. It does not occur at higher proteinase K concentrations at or above 1.0 mg/ml, consistent with crystallographic studies.

Binding Sites↗

Synchrotron X-ray data collection and restrained least-squares refinement of the crystal structure of proteinase K at 1.5 A resolution.

The structure of the serine endopeptidase proteinase K (279 amino acid residues; 28,790 daltons) has been refined by restrained least-squares methods to a conventional R value of 16.7% employing synchrotron film data of 30,812 reflections greater than 3 sigma in the 5.0 to 1.5 A resolution range. During refinement, the molecular structure was restrained to known stereochemistry, with root-mean-square (r.m.s.) deviation of 0.015 A from ideal bond lengths. The average atomic temperature factor, B, is 11.1 A2 for all atoms. The final model comprises 2020 protein atoms and 174 solvent molecules (which were given unit occupancies). Four corrections to the amino acid sequence were made, which were confirmed later by sequence analysis of the proteinase K gene: a deletion of one glycine in position 80; a change of sequence in position 207-208 and insertions of the dipeptide 210-211 and of residue 270. The r.m.s. deviation in the alpha-C atomic positions between the final refined model and the initial model built on the basis of a 3.3 A mini-map is 1.72 A for 227 out of 266 residues, which were originally traced in the mini-map without sequence information. The positions of the remaining 39 residues deviate by more than 8 A from the original ones and are located in regions where extensive revision of the structural model was necessary.

Crystallization↗

X-ray and model-building studies on the specificity of the active site of proteinase K.

Proteinase K, the extracellular serine endopeptidase (E.C.3.4.21.14) from the fungus Tritirachium album limber, is homologous to the bacterial subtilisin proteases. The binding geometry of the synthetic inhibitor carbobenzoxy-Ala-Phechloromethyl ketone to the active site of proteinase K was first determined from a Fourier synthesis based on synchrotron X-ray diffraction data between 1.8 A and 5.0 A resolution. The protein inhibitor complex was refined by restrained least-squares minimization with the data between 10.0 and 1.8 A. The final R factor was 19.1%, and the model contained 2,018 protein atoms, 28 inhibitor atoms, 125 water molecules, and two Ca2+ ions. The peptide portion of the inhibitor is bound to the active center of proteinase K by means of a three-stranded antiparallel pleated sheet, with the side chain of the phenylalanine located in the P1 site. Model building studies, with lysine replacing phenylalanine in the inhibitor, explain the relatively unspecific catalytic activity of the enzyme.

Amino Acid Sequence↗

Molecular dynamics simulations of ribonuclease T1. Effect of solvent on the interaction with 2'GMP.

Molecular dynamics simulations in vacuum and with a water sphere around the active site were performed on the 2'GMP-RNase T1 complex. The presence of water led to the maintenance of the 2'-GMP-RNase T1 interactions as compared to the X-ray structure, including the hydrogen bonds implicated in the enzyme-inhibitor recognition process. The sidechain of His92 in the molecular dynamics water simulation, however, hydrogen bonds directly to the phosphate of 2'GMP in contrast to the X-ray structure but in support of the role of that residue in the enzyme's catalytic mechanism. Fluctuations of active-site residues are not strongly influenced by water, possibly owing to the exclusion of water by the bound 2'GMP, which did show an increase in mobility. Analysis of the 2'GMP-RNase T1 interactions versus time reveal an equilibrium fluctuation in the presence of water, leading to a less favorable 2'GMP-RNase T1 interaction energy, suggesting a possible relationship between picosecond fluctuations and inhibitor dissociation occurring in the millisecond time domain.

Endoribonucleases↗

On the occurrence of three-center hydrogen bonds in cyclodextrins in crystalline form and in aqueous solution: comparison of neutron diffraction and molecular dynamics results.

Three-center (bifurcated) hydrogen bonds may play a role by serving as an intermediate state between different dynamically changing hydrogen bonding patterns. Hydrogen bonding configurations can be studied experimentally by neutron diffraction and theoretically by computer simulation techniques. Here, both methods are used to analyse the occurrence of three-center hydrogen bonds in crystals of cyclodextrins. Almost all experimentally observed three-center hydrogen bonds in the crystal are reproduced in the molecular dynamics (MD) simulations, even as far as the detailed asymmetric geometry is concerned. On the basis of this result a MD simulation of cyclodextrin in aqueous solution is searched for the occurrence of three-center hydrogen bonds. Significant differences are found. In solution more different three-center hydrogen bonds per alpha-cyclodextrin molecule are observed than in the crystal but the population (existence as percent of the simulation period) of each three-center hydrogen bond is lower in solution than in crystal. These may indeed serve as intermediate states in the process of changing one hydrogen bonding pattern into another.

Chemical Phenomena↗

Crystallization of and X-ray investigations on glucose dehydrogenase from Bacillus megaterium.

The tetrameric glucose dehydrogenase from Bacillus megaterium M1286 belongs to the 'short' family of dehydrogenases with 262 amino acids per subunit (Mr approximately 30,000), and does not require Zn2+ for enzymatic action. It was crystallized as complex with its coenzyme NAD from a 1-2% protein solution by the batch method using ammonium sulfate as precipitant at pH 6.5. Crystals appeared within two days as clusters of large plates with maximum dimensions of 2 mm, which diffract X-rays to a resolution of at least 0.2 nm. The space group is orthorhombic P2(1)2(1)2(1), unit-cell dimensions are a = 15.03 nm, b = 10.42 nm and c = 6.74 nm. Assuming one molecule (approximately 120 kDa) per asymmetric unit the VM value is 0.0022 nm3/Da and the solvent content of the crystals is 45% based on a partial specific volume for the protein of 0.723 ml/g. The crystallization was further improved by using the microdialysis technique where instead of clusters, single crystals appeared within 7 days.

Bacillus megaterium↗

Absolute configuration of Rp-uridine 3',5'-cyclic phosphorothioate.

Triethylammonium uridine-3',5'-cyclic phosphorothioate crystallizes in space group P2(1)2(1)2(1), a = 7.177(1), b = 13.155(6), c = 21.114(7) A, C15H26N3O7PS, MW 423.4, Z = 4, dx = 1.41g/cm3. The crystal structure was solved by direct methods on the basis of 1493 counter X-ray diffraction data (CuK alpha) and refined to R = 5.1%. The configuration of the thiophosphate group is Rp; conformational parameters are: glycosyl torsion angle anti, -151.9(5) degrees, sugar pucker C(3')-endo with P = 27.3 degrees, vmax = 45.5 degrees, six-membered cycle in chair form. The bond distances in the non-esterified P-S and P-O suggest that the negative charge is distributed between the groups. As illustrated in this and other studies, P-O has a much higher affinity for hydrogen bonds than P-S, indicated here by interactions with triethyl-ammonium N-H and O(2')-H as donors. One additional hydrogen bond N(3)-H---0(4) ties the bases which form a ribbon-like structure. 0(2) and S are not engaged in hydrogen bonds. The triethylammonium ion is two-fold disordered.

Chemical Phenomena↗

Protein dynamics. A time-resolved fluorescence, energetic and molecular dynamics study of ribonuclease T1.

Studies using time-resolved fluorescence depolarization were performed on the internal motion of Trp 59 of ribonuclease T1 (EC 3.1.27.3) in the free enzyme, 2'-GMP-enzyme complex and 3'-GMP-enzyme complex. The Trp 59 motion was also studied in the free enzyme using molecular dynamics simulations. Energetic analysis of activation barriers to the Trp 59 motion was performed using both the transition state theory and Kramers' theory. The activation parameters showed a dependence on solvent viscosity indicating the transition state approach in aqueous solution to be inadequate. When taking solvent viscosity contributions into account agreement between the transition state and Kramers' theories was obtained. The results indicate the three enzyme forms to have different conformations with the free enzyme and 3'-GMP-enzyme complex being similar. Comparison of the experimental and theoretical results showed a good agreement on the Trp 59 motion in the free enzyme. Trp 59 appears to vibrate rapidly, with a relaxation time of the order of 1 ps, within free space in the protein matrix and to have a slower motion, with a relaxation time of the order of 100 ps, which is related to breathing of the surrounding protein matrix. Molecular dynamics results indicate high mobility in regions of the enzyme involved in the interaction with the guanine base of the inhibitor or substrate while much lower mobility occurred in residues involved in the catalytic mechanism of ribonuclease T1.

Aspergillus oryzae↗

A molecular dynamics simulation of crystalline alpha-cyclodextrin hexahydrate.

The structure of crystalline alpha-cyclodextrin (alpha-CD) hexahydrate, form I (C36H60O30.6H2O, space group P2(1)2(1)2(1)) is experimentally so well determined by X-ray and by neutron diffraction analyses that the positions of all the hydrogen atoms are available. This provides an opportunity for testing an empirical force field that is currently used in simulations of protein and nucleic acid structures by performing molecular dynamics studies employing the GROMOS program package on a system of 4 unit cells containing 16 alpha-CD molecules and 96 water molecules. A detailed comparison of the simulated and experimentally determined crystal structures shows that the experimental positions of the alpha-CD atoms are reproduced within 0.025 nm, well within the overall experimental accuracy of 0.036 nm; that the water molecules are on average within 0.072 nm from their experimental sites, with two thirds reproduced within experimental accuracy by the calculations; that high correlation is produced between the occurrence of simulated and experimentally observed hydrogen bonds. The good agreement between simulated and experimental results suggests that the tested force field is reliable.

Carbohydrate Conformation↗

Molecular dynamics simulation of crystalline beta-cyclodextrin dodecahydrate at 293 K and 120 K.

Molecular dynamics (MD) simulations for crystalline beta-cyclodextrin dodecahydrate (beta-CD) at two different temperatures, 293 K and 120 K, have been performed using the GROMOS program package. The calculated structural properties are compared to those obtained from neutron diffraction studies of this system at the quoted temperatures. The simulation was carried out over a period of 20 ps on four unit cells containing 8 beta-CD molecules and 96 water molecules, whereby all atoms were allowed to move. At room temperature, the experimental positions of the (non-hydrogen) glucose atoms are reproduced within 0.034 nm, a value which is smaller than the experimental (0.041 nm) or simulated (0.049 nm) overall root mean square (rms) positional fluctuation. The corresponding numbers for the low temperature study are 0.046 nm, 0.019 nm and 0.022 nm. At both temperatures the experimentally observed degree of anisotropy of the atomic motions is also found in the simulations. The comparison of a variety of structural properties leads to the conclusion that the molecular model and force field used are able to simulate the cyclodextrin system very well. Experimentally observed differences in properties as a function of number of glucose units in the CD molecule (alpha-CD, 6 versus beta-CD, 7) and as a function of temperature are qualitatively reproduced by the simulations.

Carbohydrate Conformation↗

Active-site geometry of proteinase K. Crystallographic study of its complex with a dipeptide chloromethyl ketone inhibitor.

Proteinase K (EC 3.4.21.14) from the fungus Tritirachium album Limber is the most active known serine endopeptidase. The sequence of its 275-residue long polypeptide chain and its three-dimensional folding show a high degree of homology with the bacterial subtilisin proteases. Using difference Fourier methods, the binding mode of the synthetic carbobenzoxy-Ala-Ala-chloromethyl ketone inhibitor to the active site of proteinase K was determined. In several cycles of restrained least-squares, the enzyme-inhibitor complex was refined to a current R = 22% for 9400 X-ray diffraction data between 2.2 and 5.0 A resolution. The inhibitor is attached to proteinase K by two covalent bonds: one between the methylene carbon of the inhibitor and N epsilon 2 of the catalytic His 68, the other between the ketone carbon atom of the inhibitor and O gamma of the catalytic Ser 221. In addition, two hydrogen bonds donated by the peptide NH of Ser 221 and by the side chain NH2 of Asn 160 hold the hemiketal O- in the oxyanion hole. The peptide inhibitor is further hydrogen bonded to the proteinase polypeptide chain in a three-stranded antiparallel pleated sheet.

Amino Acid Chloromethyl Ketones↗

Crystallization of the bifunctional proteinase/amylase inhibitor PKI-3 and of its complex with proteinase K.

One of the three wheat germ inhibitors of proteinase K is bifunctional and inhibits simultaneously proteinase K (or subtilisin but not enzymes of the trypsin family) and insect alpha-amylase. The molecular mass of this inhibitor called PKI-3 is 21 kDa, and the binding constant for proteinase K is 0.8 nM at pH 8.2, 25 degrees C, in 1:1 molar ratio. PKI-3 was crystallized by microdialysis against 10-12% polyethylene glycol 6000, 50 mM NaH2PO4, pH 6.7. The crystals have monoclinic space group P2(1) with a = 42.5, b = 65.3, c = 31.5 A, beta = 110 degrees, and diffract beyond 2.0 A resolution. The complex proteinase K X PKI-3 was crystallized by equilibrium vapor diffusion under the same conditions. The crystals are needle-shaped and still too small for X-ray analysis. Gel electrophoresis established the composition of the crystals.

Chemical Phenomena↗

Single and twinned crystals of ribulose-1,5-bisphosphate carboxylase-oxygenase from Alcaligenes eutrophus.

Ribulose-1,5-bisphosphate carboxylase-oxygenase (L8S8) from Alcaligenes eutrophus has been crystallized by equilibrium vapor diffusion techniques with ammonium sulfate as precipitant. Crystals thus obtained either as the ternary complex with CO2 and Mg2+ or as the quaternary complex with CO2, Mg2+, and 2-carboxyarabinitol 1,5-bisphosphate, a transition state analogue, diffract at least to 2.8-A resolution. Both are essentially isomorphous to each other, having orthorhombic space group C222(1) with cell dimensions a = 159 A, b = 159 A, and c = 200 A, and there is half a molecule in the asymmetric unit. The crystals of the ternary complex are sometimes twinned about the c axis so that the space group appears to be tetragonal. In this light, our earlier report (Bowien, B., Mayer, F., Spiess, E., Pähler, A., Englisch, U., and Saenger, W. (1982) Eur. J. Biochem. 106, 405-410) on a tetragonal space group P4(2)2(1)2 with crystals obtained from the same enzyme with Mg2+ and CO2 but without 2-carboxyarabinitol 1,5-bisphosphate might be incorrect.

Alcaligenes↗