Biomedical subjects

W Knoll

Publications and source records attributed to W Knoll.

At least 19 recordsLinked to original sources

PubMed2005

Langmuir-Blodgett-Kuhn and self-assembled films of asymmetrically substituted poly(paraphenylene).

Asymmetrically substituted poly(paraphenylene) (PhPPP) with hydrophilic and hydrophobic side chains was investigated. The polymer behavior at the air-water interface was studied on the basis of surface pressure-area (pi-A) isotherms and compression/expansion hysteresis measurements. PhPPP can form stable monolayers with an area per repeat unit of A=0.20+/-0.02 nm2 and a collapse pressure in the range of pi=25 mN/m. Then, Langmuir-Blodgett-Kuhn (LBK) films of PhPPP were prepared by horizontally and vertically transferring the Langmuir monolayers onto hydrophilic solid substrates at pi=12 mN/m. Cross-section analysis of the AFM tapping-mode topography images of a single transferred monolayer reveals a thickness of d0=0.9+/-0.1 nm. Taking into account the obtained monolayer thickness, curve-fitting calculations of angular scan data of LB monolayers measured using surface plasmon resonance (SPR) spectroscopy lead to a value for the refractive index of n=1.78+/-0.02 at lambda=632.8 nm. Next, the spontaneous formation of a PhPPP monolayer by adsorption from solution was studied ex situ by atomic force microscopy and UV-vis spectroscopy and in situ by using SPR spectroscopy. Stable self-assembled monolayers of PhPPP can be formed on hydrophilic surfaces with a thickness similar to that of the monolayer obtained using the LB method. The characterization results confirmed the amphiphilic character and the self-assembly properties of PhPPP, as well as the possibility of preparing homogeneous monolayer and multilayer films.

Adsorption↗

PubMed2005

Independence of synaptic specificity from neuritic guidance.

Neuronal circuits are interconnected with a high degree of specificity. While axonal guidance has been demonstrated to be crucial for the choice of the correct target region, its role in specificity at the level of individual cells remains unclear. Specificity of synapse formation may either result from precise guidance of axonal outgrowth onto the target or depend on a molecular "match" between pre- and postsynapse. To distinguish between these possibilities, an in vitro system was used in which neuritic outgrowth of rat cortical neurons is accurately guided along the narrow pathways of a surface micropattern. The micropattern consisted of a blend of extracellular matrix molecules applied to a cell repellent background of polystyrene by microcontact printing. The system reproduces guidance by attractant and repellent surface cues while no other signals that may influence synapse formation, like gradients of trophic factors or accumulations of signaling molecules, are provided. While the number of contact points between neighboring cells was strongly reduced on patterned substrates due to the geometrical restrictions, frequency of synapse formation was not different from homogeneous cultures. Thus it was unaffected by stringent guidance onto the target cell or by the number of cell-cell contacts. Moreover, a statistically significant enrichment of reciprocal contacts between mixed pairs of excitatory and inhibitory neurons over probabilistic predictions was found, which has similarly been shown by others in dissociated neuronal cultures. Our results indicate that precise axonal guidance is insufficient for target-specific synapse formation and suggest that instead recognition between individual cells is required.

Animals↗

PubMed2004

Analysis of electrotonic coupling in patterned neuronal networks.

Microcontact printing of laminin is known as an efficient approach for guiding neuronal cell migration and neurite outgrowth on artificial surfaces. In the present study, ultrathin (approximately 250 microm) brain stem slices of Sprague-Dawley rats (E15-E18) were cultured on laminin-patterned substrates, such that neuronal cells migrating out of the slices formed grid-shaped neuronal networks along the geometry defined by the pattern. The interconnections between neighbouring pairs of neurons within these artificial networks were assessed electrophysiologically by double patch-clamp recordings and optically by microinjection of fluorescent dyes. Both functional and electrotonic synapses were detected. Based on the recorded data and simulations in PSpice, an electrical model for electrotonically coupled cells was derived. In this model the neuritic pathway is described as a cylindric cable, and gap junctions are represented by an ohmic resistor. Applying this model in the data analysis, the average inner radius of neurites could be determined to be approximately 0.1 microm. In addition, evidence was found for a correlation between the path-width of the applied pattern and the diameter of neurites growing along these paths.

Journal Article↗

PubMed2003

Fusion of small unilamellar vesicles onto laterally mixed self-assembled monolayers of thiolipopeptides.

Monolayers of the thiolipopeptide NH(2)-Cys-Ala-Ser-Ala-Ala-Ser-Ser-Ala-Pro-Ser-Ser-(Myr)Lys(Myr)-OH (III) were formed on gold surfaces by self-assembly, mixed with a lateral spacer of the same peptide composition, NH(2)-Cys-Ala-Ser-Ala-Ala-Ser-Ser-Ala-Pro-Ser-Ser-Lys-OH (I). Different mixing ratios were employed ranging from 0.1 to 1, corresponding to 10-100% thiolipopeptide. These self-assembled monolayers (SAMs) were then exposed to a suspension of liposomes with the aim of forming lipid bilayers as a function of the mixing ratio. A clear optimum with respect to homogeneity and electrical properties of the membranes was obtained in the middle region (0.5) of mixing ratio, as revealed by surface plasmon resonance spectroscopy, impedance spectroscopy, and fluorescence microscopy. The combination of these methods was shown to be a powerful tool, although a true lipid bilayer was not obtained. Instead, vesicle adsorption was shown to be the predominant process, and FRAP (fluorescence recovery after photobleaching) measurements showed that the films were not fluid on the micrometer length scale.

Lipoproteins↗

PubMed2002

Polyelectrolyte-supported lipid membranes.

In this work, we report the influence of the electrostatic interaction between lipid bilayer membranes and their solid polyelectrolyte multilayer support on the properties of the membrane. All involved sample preparation steps were carried out as convenient adsorption procedures from aqueous solutions. The lipid fluidity within the membrane as well as the surface coverage of the support could be tailored via the electrostatic interaction strength between the lipid bilayer and the supporting polyelectrolyte cushion.

Electrolytes↗

PubMed2002

Electrophysiological recordings of patterned rat brain stem slice neurons.

Dissociated neuronal cultures on substrates patterned with extracellular matrix (ECM) proteins have yielded much information in the past. However, although the culture of brain slices has many advantages over dissociated neuronal cultures, its feasibility on patterned substrates has not been demonstrated to date. In the present study, neuronal outgrowth from brain stem slices onto homogeneous control substrates, and onto laminin structures of grid- and line-shape was achieved. Cultures were evaluated by means of phase contrast microscopy, antibody staining, and patch-clamp measurements. Only patterns with line sizes of more than 4 microm yielded satisfactory neuronal outgrowth. The size of the nodes in the pattern influenced the nodal compliance of the spreading cells and the amount of unstructured overgrowth. Best grid patterns were 4 microm lines and 10 microm nodes, best line patterns were 4 microm lines and 20 microm nodes. On patterned substrates, average sodium and potassium currents were reduced by approximately 50% compared to controls, whereas area-normalized ion-currents were in the same order of magnitude. This indicates that as a consequence of the pattern-enforced geometrical confinement, neurons tend to have a smaller surface. In addition, neurons on patterned substrates were rapidly covered with glial overgrowth. This was shown by antibody staining.

Animals↗

PubMed2002

Proton transport through a peptide-tethered bilayer lipid membrane by the H(+)-ATP synthase from chloroplasts measured by impedance spectroscopy.

A lipid membrane was tethered to a gold film by a peptide spacer molecule terminated by a sulfhydryl group. Membranes were formed by fusion of liposomes prepared from egg phosphatidylcholine on self assembled monolayers of the thiolipopeptide Myr-Lys(Myr)-Ser-Ser-Pro-Ala-Ser-Ser-Ala-Ala-Ser-Ala-Cys-amide mixed with mercaptoethanol as a diluent molecule or lateral spacer. These mixed films, although not representing a perfect lipid bilayer, have been shown to retain the activity of incorporated H(+)-ATP synthases from chloroplasts in contrast to films prepared from the pure thiolipopeptide. The activity of the protein was demonstrated by impedance spectroscopy. The resistance decreased due to proton transport across the lipid film, which occurs as a consequence of adenosine triphosphate (ATP) hydrolysis. Several effects previously determined from kinetic measurements of the enzyme reconstituted in liposomes such as saturation with respect to the substrate (ATP), inhibition by venturicidin, activation by a positive potential pulse and increase of the proton current as a function of increasingly negative potentials have been confirmed also for this tethered membrane system. Changes in the impedance spectra due to the addition of ATP were fully reversible.

Chloroplasts↗

PubMed2001

Modulation of the growth and guidance of rat brain stem neurons using patterned extracellular matrix proteins.

Dissociated neuronal cultures on substrates patterned with extracellular matrix (ECM) proteins have yielded much information regarding the physiological characteristics of neuronal cells behaviour in vitro. However, neuronal patterning using long term embryonic brain slice cultures has not been comprehensively demonstrated to-date. Structuring was performed by micro contact printing of laminin. The slice cultures were evaluated by means of phase contrast microscopy at 3-22 days in culture. We were able to consistently achieve outgrowth of neurons, neurites and filopodia from brain stem slices cultured on ECM proteins structures of grid- and line-shapes. We believe that brain slice cultures on patterned substrates is a favourable approach to study functional synapses in vitro under defined conditions. The use of appropriate structures and the subsequent cell patterning may help to gain further understanding of axonal, dendritic and synaptic signal transductions and processes.

Animals↗

PubMed2001

Cell-transistor hybrid systems and their potential applications.

Electrogenic cells fire spontaneous or triggered action potentials (transient changes of their membrane potentials) and can be electronically coupled to external electrodes (arrays). Signals from rat heart-muscle cells were recorded by a field-effect transistor and the results described on the basis of an equivalent circuit. This technique has potential applications in drug screening, such as measuring the dose-response curve of isoproterenol, a beta-adrenergic agonist with a positive chronotropic effect.

Action Potentials↗

PubMed2001

Investigating the kinetics of DNA-DNA and PNA-DNA interactions using surface plasmon resonance-enhanced fluorescence spectroscopy.

Plasmon surface polaritons, resonantly excited in the Kretschmann format, are used to enhance the fluorescence emission of chromophore-labeled oligonucleotides (15mers) binding to surface-attached (via biotin-streptavidin linkages) complement catcher probes. A detailed analysis of the association and dissociation kinetics as well as the affinity constants is given for a mismatch 1 hybrid, emphasizing, in particular, the experimental conditions that are required to allow for an artifact-free determination of rate constants. A first comparison between DNA- and peptide nucleic acid (PNA-) probes shows similar affinities, however, significant deviations from single-exponential kinetics predicted by a simple Langmuir model for the PNA case are found.

Base Sequence↗

PubMed2001

Functional tethered membranes.

Phospholipid bilayer membranes at the interface between a substrate and an aqueous phase, supported by or tethered to the solid surface via a polymer cushion, a peptide-, protein-, or oligosaccharide-coupling layer have reached a stage at which they are important as a novel model membrane system but also offer potential for practical applications (e.g. for biosensing purposes with membrane-integral receptors). We briefly summarize some of the recent progress made in the structural characterization of the build-up of these rather complex interfacial architectures, in the functionalization of the pure lipid matrix by the reconstitution of proteins, and in the lateral patterning of the membranes as a prerequisite for the construction of membrane chips for massive parallel monitoring of binding events.

Lipid Bilayers↗

PubMed2001

Polymer-supported lipid bilayers on benzophenone-modified substrates.

Solid-supported lipid membranes are important for their roles in fundamental biophysical research as well as in applications such as biosensors. In our study, lipopolymers containing alkyl side chains were synthesized and a mixture of the lipopolymer and free lipids was preorganized at the air-water interface and then transferred to a solid substrate using the Langmuir-Blodgett technique. A photochemical reaction between a substrate-functionalized benzophenone and C-H bonds on the lipopolymer was used to attach the lipopolymers to the substrate. The final assembly of the membrane was completed by vesicle fusion. Langmuir film experiments at the air-water interface indicate tighter molecular packing for the lipopolymers with 28 mol % alkyl side chains than for the ones with 22 mol %. Atomic force microscopy images point to phase separation of lipopolymers on the substrates due to their dewetting from hydrophobic surfaces. However, a mixture of lipopolymers and free lipids formed a smooth film on the same substrate. After the addition of the second lipid layer on the lipopolymer/free lipid layer, the fluorescence images of the polymer-supported bilayer suggested that the distal lipid layer is homogeneous on the micrometer scale. The relaxation of the fluorescent probe lipids was analyzed after application of an electric field to determine their diffusion coefficient; the distal lipid layer was mobile with an average diffusion coefficient of approximately 0.1 microm(2)/s. Moreover, the immobile fraction of the lipids in the distal layer was estimated to be around 15%.

Benzophenones↗

PubMed2001

Hindered diffusion in polymer-tethered membranes: a monolayer study at the air-water interface.

Polymer-tethered phospholipid bilayers, which are based on a phospholipid-lipopolymer mixture, represent a very promising approach to stabilize complex biomimicking composite membranes. Furthermore, they are interesting model systems to study problems of hindered diffusion in two-dimensional liquids. Here, we present fluorescence recovery after photobleaching experiments (FRAP) on mixed phospholipid-lipopolymer monolayers of DMPC and DSPE-EO(45) at the air-water interface. In contrast to recent polymer-tethered bilayer experiments where the hydrophobic lipopolymer anchors behaved as immobile obstacles within the fluid phospholipid matrix,(1) this paper investigates the influence of mobile lipopolymer obstacles on the lateral diffusion of phospholipids. We found that the lateral diffusion of phospholipids with D = 7.1 +/- 0.5 microm(2)/s is independent of the lipopolymer obstacle concentration if adjacent polymer chains do not interact with each other. However, the diffusion coefficient of nontethered phospholipids gradually decreases from D = 7.1 +/- 0.5 microm(2)/s to D = 3.4 +/- 0.1 microm(2)/s in the case of increasing polymer-polymer interactions based on frictional coupling. This can be understood by a slowing down of the obstacle mobility. While phospholipids still show a significant lateral diffusion as long as the polymer moieties interact with each other only via frictional coupling, they become rather immobile (D = 0.9 +/- 0.1 microm(2)/s) if lipopolymers form a two-dimensional physical network.

Air↗

PubMed2000

Ordered networks of rat hippocampal neurons attached to silicon oxide surfaces.

The control of neuronal cell position and outgrowth is of fundamental interest in the development of applications ranging from cellular biosensors to tissue engineering. We have produced rectangular networks of functional rat hippocampal neurons on silicon oxide surfaces. Attachment and network formation of neurons was guided by a geometrical grid pattern of the adhesion peptide PA22-2 which matches in sequence a part of the A-chain of laminin. PA22-2 was applied by contact printing onto the functionalised silicon oxide surface and was immobilised by hetero-bifunctional cross-linking with sulfo-GMBS. Geometric pattern matching was achieved by microcontact printing using a polydimethylsiloxane (PDMS) stamp. In this way the produced grid pattern ranged from 3 to 20 microm in line width and from 50 to 100 microm in line distances. As shown by atomic force microscopy (AFM), line widths and line distances of the peptide pattern differ less than 0.5 microm from the used PDMS stamp. The height of the layer of immobilised PA22-2 was approximately 3.5 nm implying the layer to be monomolecular. Immobilised PA22-2 was capable of binding anti-PA22-2 antibodies indicating that the function of the peptide was not compromised by immobilisation. Rat hippocampal neurons, cultured at low density in serum-free medium, were applied to the growth matrix of PA22-2-coated substrates and, within 1-3 h of culture, formed a network-like pattern that more or less matched the printed grid. Reliability and reproducibility of neuronal network formation depended on the geometry, line width and node diameter of the grid pattern. The immobilised neurons showed resting membrane potentials comparable with controls and, already after 1 day of culture, were capable of eliciting action potentials. The suitability of the immobilised neurons for the study of man-made neural networks and for multi-site recordings from a functional neuronal network is discussed.

Animals↗

PubMed2000

Stamping of monomeric SAMs as a route to structured crystallization templates: patterned titania films.

Gold-coated glass slides have be patterned by using self-assembled monolayers (SAM) of alkane thiols. Through the use of a special thiol terminated with a styrene monomer, microstructures of 5 to 10 microm width and 70 A height have been formed on the surface by graft polymerization of styrene. These patterned gold slides have then been used to template the precipitation of thin titania films from ethanolic solutions of titanium isopropoxide to create microstructured architectures in the film. Plasmon resonance spectra have established the presence of different steps in the process and have been used to follow the kinetics of the precipitation of titania on the surface. The structured TiO2 films have been characterized by scanning electron microscopy.

Journal Article↗

PubMed2000

Host-guest interactions at self-assembled monolayers of cyclodextrins on gold

We have developed synthesis routes for the introduction of short and long dialkylsulfides onto the primary side of alpha-, beta-, and gamma-cyclodextrins. Monolayers of these cyclodextrin adsorbates were characterized by electrochemistry, wettability studies, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and atomic force microscopy (AFM). The differences in thickness and polarity of the outerface of the monolayers were measured by electro-chemistry and wettability studies. On average about 70% of the sulfide moieties were used for binding to the gold, as measured by XPS. Tof-SIMS measurements showed that the cyclodextrin adsorbates adsorb without any bond breakage. AFM measurements revealed for beta-cyclodextrin monolayers a quasi-hexagonal lattice with a lattice constant of 20.6 A, which matches the geometrical size of the adsorbate. The alpha-cyclodextrin and gamma-cyclodextrin monolayers are less ordered. Interactions of the anionic guests 1-anilinonaphthalene-8-sulfonic acid (1,8-ANS) and 2-(p-toluidinyl)naphthalene-6-sulfonic acid (2,6-TNS) and the highly ordered monolayers of heptapodant beta-cyclodextrin adsorbates were studied by surface plasmon resonance (SPR) and electrochemical impedance spectroscopy. The SPR measurements clearly showed interactions between a beta-cyclodextrin monolayer and 1,8-ANS. Electrochemical impedance spectroscopy measurements gave high responses even at low guest concentrations (< or = 5 microM). The association constant for the binding of 1,8-ANS (K = 289,000 +/- 13,000M-1) is considerably higher than the corresponding value in solution. (Partial) methylation of the secondary side of the beta-cyclodextrin strongly decreases the binding.

Journal Article↗

PubMed2000

Functional tethered lipid bilayers.

Our strategy to provide the structural basis for the build-up of functional tethered membranes focuses on three approaches: the first one is based on the pre-organization of a monomolecular layer of a lipopolymer at the water/air interface which is then transferred to a solid support. Prior to deposition, the substrate is coated with a layer of benzophenone-derivatized silane molecules that allow for a stable covalent attachment by photo-cross-linking of some of the monomer units of the lipopolymer to the support. An alternative concept realizes a layer-by-layer deposition of the various structural elements: (1) the attachment layer with the reactive sites for the chemical stabilization; (2) a polymer 'cushion' prepared by adsorption and simultaneous or subsequent partial covalent binding to the reactive sites; and (3) a lipid monolayer transferred from the water/air interface, that contains a certain amount of lipids with reactive headgroups which, upon binding to the polymer tether, act as anchor lipids stabilizing the whole monolayer/cushion-composite. And finally, we build peptide-supported monolayers by first (self-) assembling amino acid sequences of various lengths via a SH-group near their N-terminus onto Au substances and use then their COO(-)-terminus to chemically attach phosphatidyl-ethanolamine lipids to form a stable monolayer of lipid-peptide conjugates. All the individual preparation steps and the various resulting (multi-) layers are characterized by surface plasmon spectroscopy, X-ray and neutron-reflectometry, contact angle measurements, IR spectroscopy, fluorescence microscopy, scanning probe microscopies, as well as, electrochemical techniques. For all tethering systems, the final membranes' architecture is obtained by fusing lipid vesicles onto the lipid monolayer. Proteins can be incorporated by either fusing vesicles that are loaded with the respective receptors, pores, or ion pumps via a reconstitution procedure, or via a transfer directly from a micellar solution to the pre-formed lipid bilayer at the solid support by a dialysis step. Two structural/dynamical features of tethered membranes which are considered to be of particular functional relevance, i.e. the degree of water uptake and, hence, the degree of swelling of the polymer support, as well as the lateral mobility of the lipid molecules in the membrane, are tested by surface plasmon optics and by measurements of the fluorescence recovery after photobleaching (FRAP), respectively. The results confirm that the presented preparation protocols yield fluid bilayers that mimic certain relevant properties of biological membranes. The functional characterization of tethered membranes, which is briefly summarized, is based on various electrochemical techniques, in particular, impedance spectroscopy, cyclic voltammetry, and chronoamperometric studies. The results obtained for reconstituted H(+)-ATPase from chloroplasts and E. coli and for cytochrome oxidase (with and without cytochrome c) confirm the incorporation of the proteins in an active form, thus, opening opportunities for novel sensor formats or offering a completely new model membrane system.

Biopolymers↗

PubMed2000

Formation of hippocampal synapses on patterned substrates of a laminin-derived synthetic peptide.

We created a new culture system which provides simple, stereotyped neuronal circuitries suitable for investigating synaptic events between mammalian central neurons. We used surface chemistry and laser-lithography to produce geometrical patterns of neuron-compatible substrate spaced by less neuron-compatible surfaces. The patterned substrates were composed of a laminin-derived synthetic peptide, PA22-2, and the spacing surfaces of either decyldimethylsilane (DDMS) or trimethylsilane (TMS). Dissociated rat hippocampal neurons survived on the patterned substrates for several days without the aid of glia and extended their neurites along the substrates. The TMS spacing surfaces appeared more favourable for the excitability development and axonal differentiation of the hippocampal neurons, but less favourable for the development of the resting conductance than the DDMS spacing surfaces. Furthermore, neurons grown on the patterned substrates frequently made synaptophysin-positive contacts with one another. Spontaneous post-synaptic currents recorded from such neurons suggest that these contacts were indeed functional synapses. When hippocampal neurons were plated at a very low density, they often formed circuitries consisting of only two neurons on the patterned substrate. Such a simple circuitry allowed us to analyse synaptic transmission in a single neuronal pair without the influence of the third neurons. With the clarity of analysis and the readiness of manipulation, our culture system would offer a powerful tool for studying development and functions of mammalian central synapses.

Animals↗