Search PubMed⌕ Search

Biomedical subjects

W Hoppe

Publications and source records attributed to W Hoppe.

At least 19 recordsLinked to original sources

Does epinephrine improve the diagnostic accuracy of aspiration during labor epidural analgesia?

UNLABELLED: Aspiration reliably detects almost all IV multiorifice epidural catheters. Although a supplemental epinephrine 15-microg test dose may detect the rare IV catheter that does not yield blood on aspiration, false-positive epinephrine responses may cause some women to unnecessarily undergo repeat epidural catheter insertion. We evaluated 532 consecutive eligible patients requesting neuraxial labor analgesia. Patients were excluded if they had a contraindication to epinephrine or if they received intrathecal sufentanil/bupivacaine. Multiorifice catheters were inserted 4-6 cm into the epidural space as part of an epidural (n = 305) or combined spinal-epidural (n = 270) technique. We used aspiration, a lidocaine/epinephrine test dose, and bolus injection or infusion of dilute bupivacaine/sufentanil solutions to systematically determine IV, intrathecal, or epidural catheter location. Aspiration alone detected 47 of 48 intravascular catheters. There were 10 positive epinephrine responses: 2 were true positives, 7 were falsely positive (subsequent local anesthetic injection/infusion produced bilateral sensory change and analgesia), and 1 catheter was removed without further testing. Aspiration detected almost all intravascular catheters. Although the epinephrine test dose did detect one catheter that proved to be in a blood vessel, 87.5% of positive responses occurred in women without intravascular catheters. IMPLICATIONS: Epidural catheters may enter a blood vessel. Many clinicians use epinephrine to detect these catheters. Because aspiration alone detects almost all IV multiorifice catheters in laboring women, a subsequent epinephrine test dose may be unnecessary.

Adult↗

Labor epidural analgesia without an intravascular "test dose".

BACKGROUND: This study prospectively evaluated the ability of aspiration to detect intravascular placement of multiple-orifice epidural catheters. METHODS: Multiple-orifice, 20-gauge epidural catheters were inserted in 1,029 laboring women. Catheters were observed and aspirated for blood or cerebrospinal fluid before they were tested with 2 ml local anesthetic. If the results of this test were negative (no spinal anesthesia), the authors induced and maintained labor analgesia with a dilute local anesthetic and opioid solution. Patients with bilateral sensory change and effective labor analgesia had a "positive" epidural catheter. Women with unilateral block, inadequate analgesia despite some sensory change or those who delivered before being adequately assessed had "equivocal" catheters. Patients with neither analgesia nor sensory change had "negative" catheters. RESULTS: Aspiration and observation identified 60 intravenously placed catheters. Six catheters, which were placed initially in a blood vessel, were withdrawn until aspiration was negative, and then the anesthetic was infused. Four of these catheters were positive and two were still positioned intravascularly. Two other catheters may have been intravenously placed despite negative results of aspiration. The incidence of false-negative results of aspiration was 0 to 2 of 1,085 (upper limit of 95% CI, 0.2% to 0.4%). No patient showed any signs or symptoms of local anesthetic toxicity. CONCLUSIONS: Under the conditions of this study, which include using multiple-orifice catheters and dilute solutions of local anesthetic and opioid, aspiration and incremental drug injection alone safeguard against the risks of intravenously positioned local anesthetics. These results should not be extrapolated to other clinical settings without further study.

Adolescent↗

Properties of endodontic hand instruments used in rotary motion. Part 3. Resistance to bending and fracture.

Bending and torsional properties of 24 different types of nickel-titanium K-files, titanium-aluminium K-files and reamers, conventional stainless steel K-files and reamers, and flexible stainless steel instruments were investigated corresponding to ISO 3630-1 by determination of the bending moment on the one hand and the torque and angular deflection on the other. Numbers 15, 25, and 35 instruments were tested with a sample size of 10 instruments for each type and size. In ascending order of bending moment the instruments ranked: nickel-titanium K-files, titanium-aluminium K-files and reamers, flexible stainless steel instruments, conventional stainless steel K-files, and reamers. Nickel-titanium, titanium aluminium, and flexible stainless steel instruments displayed lower torque values than conventional stainless steel K-files and reamers. The average angular deflection ranged from 380 degrees (#15 reamer) to 2370 degrees (#35 K-file). Overall, the fracture risk of the instruments tested in this study was comparably low.

Aluminum↗

Properties of endodontic hand instruments used in rotary motion. Part 2. Instrumentation of curved canals.

The shaping abilities of nickel-titanium K-files, stainless steel reamers, K-files, and flexible stainless steel instruments with conventional cutting tips and with modified noncutting tips were investigated under standardized conditions using a computer-driven testing device simulating the clinical use of the instruments. Simulated root canals with a 42-degree curvature were sequentially enlarged from #15 to #35. Undesirable changes in the canal shape as a result of instrumentation occurred in all cases. None of the instruments were able to remove material on the whole length of the inner side of the curvature, whereas all instruments removed material on the whole length of the outer side of the curvature, resulting in slight to severe bulging. The extent of undesirable changes in the canal shape depended typically of the type of instrument used. Best instrumentation results were obtained with flexible instruments with noncutting tips.

Alloys↗

Properties of endodontic hand instruments used in rotary motion. Part 1. Cutting efficiency.

Cutting efficiency of 24 different types of endodontic hand instruments, which are primarily designed for a rotary (reaming) working action, was investigated under standardized conditions. With a computer-driven testing device, resin specimens with simulated cylindrical canals were instrumented using a defined working motion simulating the clinical use of the instruments. Maximum penetration depth was the criterion for cutting efficiency. Sample size was 12 instruments for each type and size (#25 and #35). Nitinol K-files showed the least cutting efficiency. Stainless steel reamers and especially K-files showed better cutting efficiency than Nitinol K-files. Flexible stainless steel instruments displayed the best results. With regard to cutting efficiency, flexible stainless steel instruments were clearly superior to stainless steel reamers and K-files, and especially to Nitinol K-files.

Alloys↗

Root canal instruments for manual use: cutting efficiency and instrumentation of curved canals.

The cutting efficiency of different endodontic hand instruments and the effects of instrumentation on curved canal shape were investigated under standardized experimental conditions using an automatic testing device. Cutting efficiency in rotary motion was assessed by determination of the maximum penetration depth of the instruments into a cylindrical canal in a special resin block (size 25 and size 35 instruments). Changes in canal shape were determined by instrumentation of standardized canals (42 degrees curvature) incrementally from size 15 to size 35. Except in the case of one instrument, size 35, in both sizes tested flexible instruments reached significantly (P < 0.05) greater maximum penetration depths than conventional reamers or K-files. Changes in the canal shape differed significantly between the different instruments in 13 of the 14 measuring points. Drastic undesirable changes in the canal shape (e.g. straightening or zip and elbow) occurred after instrumentation with reamers and K-files, but these changes were less noticeable after instrumentation with flexible instruments with conventional tips. After instrumentation with flexible instruments with modified tips there were few undesirable changes in shape. The conclusion could be drawn that flexible instruments, especially those with modified tips, were clearly superior to conventional reamers and K-files with regard to cutting efficiency and instrumentation of curved canals.

Analysis of Variance↗

Reaction of inflamed periapical tissue to intracanal medicaments and root canal sealers.

The effects of different intracanal medicaments and zinc oxide-eugenol based root canal sealers on an experimentally induced apical periodontitis were studied histologically in mesial roots of lower molars of Wistar rats. After root canal instrumentation each canal was filled either with an intracanal medicament twice for 3 days each time or with a sealer for 21 days. The intracanal medicament chlorophenol caused periapical tissue damage. P-chloroxylenol-camphor lead to periapical improvement as did 5% sodium-hypochlorite. 12% sodium-hypochlorite gave tissue damage. After intracanal medication with an aqueous suspension of calcium hydroxide periapical repair was clearly visible. A combination of a corticoid and an antibiotic appeared to induce damage of the periapical tissues. The root canal sealers Endomethasone and N2 essentially impaired periapical repair. The results were acceptable for Aptal-Zink-Harz root canal fillings after 21 days as well as after 56 days.

Administration, Topical↗

Organophosphate sensitive and insensitive carboxylesterases in human skin.

The influence of paraoxon and bis(4-nitrophenyl)phosphate (BNPP) on carboxylesterases of human skin is assayed. Both organophosphates have frequently been used as inhibitors of carboxylesterases of the B-esterase type. Homogenates from carefully washed skin have no paraoxon-cleaving activity and very little phosphodiesterase activity with BNPP. However, a number of skin enzymes are irreversibly inhibited by these compounds. Three zones of carboxylesterase bands can be detected in the soluble fraction of skin homogenate by isoelectric focusing. One zone containing 5 esterase bands in the pI-range of 6.7-7.0 and another zone at pI 4.9 are insensitive to organophosphate inhibition. The zone with the main esterase activities contains at least 6 bands in the range of pI 5.7-6.2. All of these are quickly and completely inhibited by paraoxon. The complex inhibition kinetics with BNPP and observations with differing substrates point to a functional heterogeneity. The esterases with pI-values in the range of 5.7 to 6.2 and the esterase with pI 4.9 can be enriched using anion exchange chromatography and FPLC. From the data presented here it is concluded that human skin contains at least four different carboxylesterases which act on simple aromatic esters.

Carboxylic Ester Hydrolases↗

[Solubility of enamel and synthetic hydroxylapatite on irradiation].

The effect of Co 60-irradiation (70 Gy) on pulverized human enamel and synthetic hydroxyapatite was studied in vitro. Irradiated and non-irradiated samples were experimentally demineralized (pH 5.1) during a period of 28 days. In terms of solubility, defined as the equilibrium of saturation, there was no statistically significant difference between irradiated and non-irradiated enamel. However, in terms of solubility rates, defined as the amount of dissolved substance during the demineralization period, irradiated enamel showed a statistically significantly higher solubility rate than non-irradiated enamel. There was no effect of Co 60-irradiation on synthetic hydroxyapatite.

Dental Enamel Solubility↗

[Study of properties of electrical root canal length measuring instruments].

Six electrical instruments for locating the apex during endodontic treatment were tested in a laboratory investigation about currency, frequency and scale. Further we looked, whether all instruments show coincidence in the apex point. There are great differences in currency, frequency and scale (apex point). The reproducibility and the precision of an apex locator--at the time--depends an many factors and thus indication seems to be very limited.

Dental Pulp Cavity↗

Endocytosis of a small dermatan sulphate proteoglycan. Identification of binding proteins.

Endosomal preparations from human osteosarcoma cells and from fibroblasts contain 51,000- and 26,000-Mr proteins which bind a small dermatan sulphate proteoglycan after SDS/polyacrylamide-gel electrophoresis and Western blotting. Binding can be inhibited by unlabelled proteoglycan core protein. The proteins co-precipitate with a proteoglycan core protein-antibody complex. Scatchard analysis of immobilized endosomal proteins yielded a KD of about 37 nM for the proteoglycan. In intact cells proteins of the same size can be found. They are sensitive to trypsinization. A 51,000-Mr protein is the predominant membrane protein with strong binding to immobilized dermatan sulphate proteoglycan. There are additional proteoglycan-binding proteins with Mr values of around 30,000 and 14,000 which are insensitive to trypsin treatment. In contrast with the 51,000- and 26,000-Mr proteins, they resist deoxycholate/Triton X-100 extraction several days after subcultivation.

Aggrecans↗

The alkalizing properties of calcium hydroxide compounds.

Calcium hydroxide compounds are available in various forms, such as in aqueous suspensions or as cements, liners, pastes or filled resins. When such compounds are exposed to water, the calcium hydroxide dissociates and the pH value shifts to the basic. In this study the compounds Pulpdent, Dycal, Hydroxyline, Gangraena Merz and Prisma VLC-Dycal were subjected to analysis, including quantitative measurement of the amount and the chronological course of ion release following exposure to water, qualitative analysis of the alkalizing effects at the dentin surface and examination of antimicrobial properties. The results showed that calcium hydroxide compounds differed greatly. The strongest degree of ion release, combined with definite antimicrobial properties, was found for the aqueous calcium hydroxide suspension (Pulpdent). The cement (Dycal) demonstrated significantly weaker activity. The liner and the paste (Hydroxyline and Gangraena Merz), as well as the calcium hydroxide filled resin (Prisma VLC-Dycal), were largely lacking in both ion release and antimicrobial properties under the experimental conditions.

Calcium Hydroxide↗

Degradation of endocytosed dermatan sulfate proteoglycan in human fibroblasts.

Endocytosis and subsequent degradation of iduronic acid-rich small dermatan sulfate proteoglycan from fibroblast secretions were studied in human fibroblasts. Upon endocytosis of [3H]leucine- and [35S]sulfate-labeled proteoglycan release of free leucine was 10 to 15 times more rapid than that of inorganic sulfate. Within approximately 3 h a steady state was approached between transport of proteoglycan to the compartment of core protein degradation and release of free leucine. No such steady state could be found with respect to the dermatan sulfate chains. In the presence of benzyloxycarbonyl-Phe-Ala-diazomethylketone or of other SH-protease inhibitors the degradation of the protein moiety of endocytosed proteoglycan was much less inhibited than the degradation of the polysaccharide chain. Benzyloxycarbonyl-Phe-Ala-diazomethylketone did not affect the degradation of dermatan sulfate chains taken up by fluid phase endocytosis and the activities of all known dermatan sulfate-degrading enzymes. Percoll gradient centrifugation indicated that also in the presence of the protease inhibitor the partially degraded proteoglycan accumulated in dense lysosomes. The isolation of intracellular dermatan sulfate peptides and molecular size determinations of endocytosed dermatan sulfate proteoglycan supported the conclusion that a critical proteolytic step is required before the dermatan sulfate chain becomes accessible to hydrolytic enzymes.

Ammonium Chloride↗