Search PubMed⌕ Search

Biomedical subjects

W E Timberlake

Publications and source records attributed to W E Timberlake.

At least 37 records · Page 2Linked to original sources

The Aspergillus nidulans yA gene is regulated by abaA.

The developmentally regulated Aspergillus nidulans yA gene encodes a p-diphenol oxidase that is needed for synthesis of green conidial pigment. We subjected the yA 5' flanking region to mutational analysis in A. nidulans and Saccharomyces cerevisiae to identify DNA sequence elements involved in its transcriptional control, and identified two functionally distinct elements. Element I contained potential BrlA binding sites and was required for full level yA transcription, but not for developmental regulation in the presence of element II. Element II contained putative TEF-1 binding sites flanking a CCAAT element and was sufficient for developmental regulation of transcription. Mutation of the TEF-1 binding sites eliminated developmental regulation, whereas mutation of the CCAAT element led to elevated levels of transcription. Element II was also sufficient to induce transcription in S. cerevisiae when the A.nidulans developmental regulatory gene abaA was expressed from the GAL1 promoter. As AbaA and TEF-1 possess similar DNA binding domains, the abaA-yA interaction in yeast is probably direct. Thus, abaA appears to be a direct activator of yA, but yA regulation may also involve interactions with BrlA and a member of the CCAAT class of DNA binding proteins.

Amino Acid Sequence↗

The Aspergillus nidulans brlA regulatory locus consists of overlapping transcription units that are individually required for conidiophore development.

The Aspergillus nidulans brlA locus controls conidiophore development in conjunction with the products of several other regulatory loci. In this paper, we show that the brlA locus consists of overlapping transcription units, designated alpha and beta, with alpha transcription initiating within beta intronic sequences. The predicted BrlA polypeptides differ by 23 amino acid residues at their N-termini. Targeted mutations specifically eliminating either the alpha or beta transcript led to developmental abnormalities similar to those produced by previously identified hypomorphic mutants, showing that both transcripts have essential functions for normal development. However, provision of additional doses of alpha in a beta- strain or of beta in an alpha- strain remediated the developmental defects, indicating that the polypeptides have redundant functions. It is likely that differential regulation of alpha and beta expression in the wild type is important for the initiation and temporal regulation of development.

Amino Acid Sequence↗

PCAP: probe choice and analysis package--a set of programs to aid in choosing synthetic oligomers for contig mapping.

In the program, PCAP, we provide a methodology for choosing synthetic oligonucleotide probes to be used in contig mapping experiments. The package serves the purpose of presenting a series of short oligonucleotides (8-12mers) that are chosen based on constraints with respect to frequency of occurrence within a particular genome and the G+C content of the oligonucleotides. The four programs contained within the package: (i) convert GenBank files to a format useable by the package; (ii) calculate trinucleotide and tetranucleotide frequencies in available sequence data on a particular species; (iii) present the user with upper and lower bounds on the frequencies of hybridization sites for oligonucleotide probes of length 8-12, (iv) allow the user to place constraints on site frequency and G+C content and provides a list of short probe sequences that fit these criteria. These sequences can then be synthetically produced and used in hybridization experiments to carry out contig mapping.

Base Sequence↗

ODS: ordering DNA sequences--a physical mapping algorithm based on simulated annealing.

In the program ODS we provide a methodology for quickly ordering random clones into a physical map. The process of ordering individual clones with respect to their position along a chromosome is based on the similarity of binary signatures assigned to each clone. This binary signature is obtained by hybridizing each clone to a panel of oligonucleotide probes. By using the fact that the amount of overlap between any two clones is reflected in the similarity of their binary signatures, it is possible to reconstruct a chromosome by minimizing the sum of linking distances between an ordered sequence of clones. Unlike other programs for physical mapping, ODS is very general in the types of data that can be utilized for chromosome reconstruction. Any trait that can be scored in a presence--absence manner, such as hybridized synthetic oligonucleotides, restriction endonuclease recognition sites or single copy landmarks, can be used for analysis. Furthermore, the computational requirements for the construction of large physical maps can be measured in a matter of hours on work-stations such as the VAX2000.

Algorithms↗

Identification of Aspergillus brlA response elements (BREs) by genetic selection in yeast.

The brlA gene of Aspergillus nidulans plays a central role in controlling conidiophore development. To test the hypothesis that brlA encodes a transcriptional regulator and to identify sites of interaction for the BrlA polypeptide, we expressed brlA in Saccharomyces cerevisiae (yeast) strains containing Aspergillus DNA sequences inserted upstream of a minimal yeast promoter fused to the Escherichia coli lacZ gene. Initially, a DNA fragment from the promoter region of the developmentally regulated rodA gene was tested and shown to mediate brlA-dependent transcriptional activation. Two additional DNA fragments were selected from an Aspergillus genomic library by their ability to respond to brlA in yeast. These fragments contained multiple copies of a sequence motif present in the rodA fragment, which we propose to be sites for BrlA interaction and designate brlA response elements (BREs). DNA fragments containing BREs upstream of a minimal Aspergillus promoter were capable of conferring developmental regulation in Aspergillus. Deletion of BREs from the upstream region of rodA greatly decreased its developmental induction. Multiple copies of a synthetic oligonucleotide with the consensus sequence identified among the BREs mediated brlA-dependent transcriptional activation in yeast. The results show that a primary activity of brlA is transcriptional activation and tentatively identify sites of interaction for the BrlA polypeptide.

Aspergillus nidulans↗

The developmentally regulated Aspergillus nidulans wA gene encodes a polypeptide homologous to polyketide and fatty acid synthases.

The Aspergillus nidulans wA gene is required for synthesis of a green pigment present in the walls of mature asexual spores (conidia); wA mutants produce colorless (white) conidia. We determined the transcriptional structure and DNA sequence of the wA gene. wA consists of 5 exons separated by short (40-60 bp) introns. The processed transcript has the potential to encode a protein consisting of 1986 amino acid residues. The predicted WA polypeptide showed extensive sequence similarities with bacterial and fungal polyketide synthases and vertebrate fatty acid synthases, particularly within conserved active sites. Properties of the yellow conidial wall pigment intermediate suggest that it is a polyketide rather than a fatty acid. It is therefore likely that wA encodes all or part of a polyketide synthase involved in the formation of this pigment intermediate.

Amino Acid Sequence↗

CMAP: contig mapping and analysis package, a relational database for chromosome reconstruction.

In the contig mapping and analysis package, CMAP, we provide a foundation for reverse genetics by organizing information about DNA fragments obtained from an organism's genome into a physical map. The user can store information about a particular segment of DNA. This information can be both descriptive, such as any genes contained in a particular DNA fragment, or experimental, such as hybridization profiles or restriction digest patterns for comparison with other fragments. The package can then be instructed to update the physical map or provide information on a DNA fragment within the map, such as its location. The user interface is designed to minimize the learning curve associated with database usage, while eliminating the possibility of entering data outside the ranges of fields through error-checking protocols. Queries are currently accomplished by the use of dynamic SQL (structured query language), which gives the user the ability to build queries based on any combination of the attributes contained within the database without requiring that all possible queries be permanently programmed within the query software. In order to eliminate the need for knowledge of SQL, an interface was designed to allow users to build queries by menu choices. Thus, CMAP is a software package supporting a database for both the production and storage of a physical map as well as being the first step toward the production of a physical mapping workstation.

Algorithms↗

The use of simulated annealing in chromosome reconstruction experiments based on binary scoring.

We present a method of combinatorial optimization, simulated annealing, to order clones in a library with respect to their position along a chromosome. This ordering method relies on scoring each clone for the presence or absence of specific target sequences, thereby assigning a digital signature to each clone. Specifically, we consider the hybridization of oligonucleotide probes to a clone to constitute the signature. In that the degree of clonal overlap is reflected in the similarity of their signatures, it is possible to construct maps based on the minimization of the differences in signatures across a reconstructed chromosome. Our simulations show that with as few as 30 probes and a clonal density of 4.5 genome equivalents, it is possible to assemble a small eukaryotic chromosome into 33 contiguous blocks of clones (contigs). With higher clonal densities and more probes, this number can be reduced to less than 5 contigs per chromosome.

Algorithms↗

On the design of genome mapping experiments using short synthetic oligonucleotides.

The DNA of an organism can be digested into smaller fragments, stored individually as clones in phage, for example, to create a clone library, and retrieved later, when needed. The original ordering of fragments is lost in the process of creating the library. Hence, it is important to be able to place clones in order according to their position along chromosome(s), and this process is referred to as "in vitro reconstruction" or "contig mapping" of an organismal genome. Clones in the phage library can be assigned binary call numbers by scoring each clone for hybridization (0 or 1) with a battery of short manufactured DNA sequences called synthetic oligonucleotides or with restriction enzyme digests of each clone. Those clones with similar call numbers are placed close together in the ordered library. We address the design question of how many clones and probes to use to carry out in vitro reconstruction of an organism's chromosomes. This physical mapping problem is placed in the context of coverage problems in geometrical probability. Various statistics are developed to summarize how an ordered library covers a chromosome, the extent of clone overlap, and the similarity between clone call numbers. Several tests for whether clones overlap are given, together with their power properties. A simulation study is used to determine how robust some of the tests for clone overlap are to model violations. Tables are presented for researchers to choose the number of clones and probes on the basis of both power and technical considerations surrounding the hybridization experiments.

Animals↗

Chromosome-specific recombinant DNA libraries from the fungus Aspergillus nidulans.

Development of physical genomic maps is facilitated by identification of overlapping recombinant DNA clones containing long chromosomal DNA inserts. To simplify the analysis required to determine which clones in a genomic library overlap one another, we partitioned Aspergillus nidulans cosmid libraries into chromosome-specific subcollections. The eight A. nidulans chromosomes were resolved by pulsed field gel electrophoresis and hybridized to filter replicas of cosmid libraries. The subcollections obtained appeared to be representative of the chromosomes based on the correspondence between subcollection size and chromosome length. A sufficient number of clones was obtained in each chromosome-specific subcollection to predict the overlap and assembly of individual clones into a limited number of contiguous regions. This approach should be applicable to many organisms whose genomes can be resolved by pulsed field gel electrophoresis.

Aspergillus nidulans↗

Temporal and spatial controls of Aspergillus development.

The mechanisms regulating elaboration of the multicellular asexual reproductive apparatus, the conidiophore, of the filamentous ascomycete Aspergillus nidulans provide a model for the control of fungal development. Recent advances have been made on three fronts. First, new physical and chemical signals have been discovered that control commitment of cells to the conidiation pathway. Second, positively acting developmental regulatory genes have been cloned and characterized. In addition, evidence has been obtained for the existence of negatively acting regulatory loci. Finally, an anonymous developmentally regulated gene has been used to make a directed mutation that has revealed the morphogenetic function of the gene.

Aspergillus nidulans↗

Rodletless, a new Aspergillus developmental mutant induced by directed gene inactivation.

The Aspergillus nidulans CAN41 transcription unit is activated by the brlA regulatory gene early during development of the asexual reproductive apparatus, the conidiophore. Disruption of CAN41 results in a novel mutant phenotype in which conidiophore cells and spores lack an external wall layer, the rodlet layer, making them less hydrophobic than in the wild type and leading to inefficient spore dispersal. The rodletless mutation defines a new locus on chromosome III, rodA. rodA encodes a small, moderately hydrophobic polypeptide containing 8 cysteines arranged in a pattern similar to that observed in three hydrophobic cell wall proteins from the Holobasidiomycete Schizophyllum commune. We propose that the Aspergillus and Schizophyllum 8-cysteine polypeptides define a class of secreted, hydrophobic, fungal cell wall proteins that are important in the formation and function of aerial structures such as conidiophores and mushrooms.

Amino Acid Sequence↗

Aspergillus nidulans wetA activates spore-specific gene expression.

The Aspergillus nidulans wetA gene is required for synthesis of cell wall layers that make asexual spores (conidia) impermeable. In wetA mutant strains, conidia take up water and autolyze rather than undergoing the final stages of maturation. wetA is activated during conidiogenesis by sequential expression of the brlA and abaA regulatory genes. To determine whether wetA regulates expression of other sporulation-specific genes, its coding region was fused to a nutritionally regulated promoter that permits gene activation in vegetative cells (hyphae) under conditions that suppress conidiation. Expression of wetA in hyphae inhibited growth and caused excessive branching. It did not lead to activation of brlA or abaA but did cause accumulation of transcripts from genes that are normally expressed specifically during the late stages of conidiation and whose mRNAs are stored in mature spores. Thus, wetA directly or indirectly regulates expression of some spore-specific genes. At least one gene (wA), whose mRNA does not occur in spores but rather accumulates in the sporogenous phialide cells, was activated by wetA, suggesting that wetA may have a regulatory function in these cells as well as in spores. We propose that wetA is responsible for activating a set of genes whose products make up the final two conidial wall layers or direct their assembly and through this activity is responsible for acquisition of spore dormancy.

Amino Acid Sequence↗

Conidium differentiation in Aspergillus nidulans wild-type and wet-white (wetA) mutant strains.

Conidium (asexual spore) differentiation in wild-type and the wet-white (wetA) mutant of Aspergillus nidulans was compared in intact chains of successively older conidia. Carbohydrate cytochemistry helped define three stages (Stages I, II, and III) of wild-type conidium maturation on the basis of changes in the ultrastructure and composition of the conidium wall. Conidia of the wetA6 mutant strain formed normally but failed to mature during Stages II and III. Specifically, the inner wall layer of wetA6 conidia did not condense during Stage II and two wall layers that stained for carbohydrates did not form during the transition to Stage III. Concomitantly, wetA6 conidia formed large cytoplasmic vacuoles and underwent lysis. The wetA gene appears to have a conidium-specific function for the modification of the conidium wall during Stages II and III. These modifications of the conidium wall are essential for the stability of mature, dormant conidia.

Aspergillus nidulans↗

Developmental repression of growth and gene expression in Aspergillus.

Asexual reproductive development can be initiated in Aspergillus nidulans in the presence of excess nutrients through artificial induction of the developmental regulatory genes brlA or abaA by fusing the genes to the promoter from the alcohol dehydrogenase I gene (alcA) and culturing cells in the presence of an inducing alcohol. Artificially induced development completely inhibits growth and represses expression of the endogenous alcA gene and the coordinately controlled aldehyde dehydrogenase gene (aldA). Repression of alcA and aldA expression probably occurs at both the transcriptional and posttranslational levels. We propose that developmental induction results in a generalized metabolic shutdown, leading to an inability of cells to acquire nutrients from the growth medium. Self-imposed nutrient limitation could reinforce the primary developmental stimulus and ensure progression through the asexual reproductive pathway.

Alcohol Dehydrogenase↗