Search PubMed⌕ Search

Biomedical subjects

W Chiu

Publications and source records attributed to W Chiu.

At least 19 recordsLinked to original sources
PubMed1996

Visualization of ordered genomic RNA and localization of transcriptional complexes in rotavirus.

In double-stranded-RNA (dsRNA) viruses found in animals, bacteria and yeast, the genome is transcribed within the structurally intact core of the virion with extraordinary efficiency. The structural organization of the genome and the enzymes involved in the transcription inside any of these viruses, critical for understanding this process, is not known. Here we report what we believe is the first three-dimensional characterization of the viral genome and the transcription complex in a prototypical dsRNA virus. Rotavirus is a large (diameter 1,000 A) icosahedral virus composed of three capsid protein layers and 11 dsRNA segments. It is the most important cause of gastroenteritis in children, accounting for over a million deaths annually. We show that viral dsRNA forms a dodecahedral structure in which the RNA double helices, interacting closely with the inner capsid layer, are packed around the enzyme complex located at the icosahedral 5-fold axes. The ordered RNA accounts for about 4,500 out of a total 18,525 base pairs in the genome, the largest amount of icosahedrally ordered RNA observed in any virus structure to date. We propose that the observed organization of the dsRNA is conducive for an orchestrated movement of the RNA relative to the enzyme complex during transcription.

Cell Line↗
PubMed1996

Three-dimensional structure of scaffolding-containing phage p22 procapsids by electron cryo-microscopy.

The procapsids of bacterial viruses are the products of the polymerization of coat and scaffolding subunits, as well as the precursors in DNA packaging. Electron cryo-microscopy has been used to study the three-dimensional structures of bacteriophage P22 procapsids containing wild-type and mutant scaffolding proteins. The scaffolding mutant structure has been resolved to 19 A resolution and agrees with the 22 A resolution wild-type procapsid reconstruction. Both procapsid reconstructions contain an outer icosahedral coat protein shell and an inner scaffolding protein core. The outer core protein forms a T = 7 icosahedral lattice with distinctive channels present at the centers of the pentons and hexons. In addition, the hexons display a prominent skew. Computational isolation of the skewed hexon shows the presence of a local 2-fold axis that reduces the number of unique conformations in the asymmetric unit to four at this resolution. We have classified the four unique subunits into three distinct classes, based upon the shape of the upper domain and the presence of a channel leading to the inner coat protein surface. In addition, at the inner surface of the coat protein, finger-like regions that extend towards the scaffolding protein core are present in two of the subunits. The finger-like regions suggest the presence of an ordered interaction between the inner coat protein and the scaffolding protein. However, an icosahedral scaffolding protein shell is not formed, and the innermost scaffolding protein core does not pack with icosahedral symmetry.

Bacteriophage P22↗
PubMed1996

Mycobacterium tuberculosis 16-kDa antigen (Hsp16.3) functions as an oligomeric structure in vitro to suppress thermal aggregation.

Tuberculosis continues to be a major disease threatening millions of lives worldwide. Several antigens of Mycobacterium tuberculosis, identified by monoclonal antibodies, have been cloned and are being exploited in the development of improved vaccines and diagnostic reagents. We have expressed and purified the 16-kDa antigen, an immunodominant antigen with serodiagnostic value, which has been previously cloned and shown to share low sequence homology with the alpha-crystallin-related small heat shock protein family. Sedimentation equilibrium analytical ultracentrifugation and dynamic light scattering demonstrate the formation of a specific oligomer, 149 +/- 8 kDa, consisting of approximately nine monomers. In 4 M urea, a smaller oligomer of 47 +/- 6 kDa (or trimer) is produced. Analysis by electron cryomicroscopy reveals a triangular shaped oligomeric structure arising from the presence of three subparticles or globules. Taken together, the data suggest an antigen complex structure of a trimer of trimers. This antigen, independent of ATP addition, effectively suppresses the thermal aggregation of citrate synthase at 40 degrees C, indicating that it can function as a molecular chaperone in vitro. A complex between the antigen and heat-denatured citrate synthase can be detected and isolated using high performance liquid chromatography. We propose to rename the 16-kDa antigen Hsp16.3 to be consistent with other members of the small heat shock protein family.

Bacterial Proteins↗
PubMed1996

Visualization of beta-sheets and side-chain clusters in two-dimensional periodic arrays of streptavidin on phospholipid monolayers by electron crystallography.

The biotin-binding protein streptavidin was crystallized as two-dimensional periodic arrays on biotinylated phospholipid monolayers. Electron diffraction patterns and images of the arrays embedded in vitreous ice were recorded to near-atomic resolution. Amplitudes and phases of structure factors were computed and combined to produce a 3 A projection density map. The reliability of the map was verified by comparing it to the available x-ray atomic model of the molecule. Projection densities from beta-strands and some amino acid side chains were identified from the electron cryomicroscopy map. These results demonstrate the first near-atomic image of this type of protein periodic array by electron crystallography, which has a great potential to aid in the structural characterization of molecular arrays engineered on a monolayer for various basic or biotechnological applications.

Amino Acid Sequence↗
PubMed1996

Two structural configurations of the skeletal muscle calcium release channel.

Here we present the determination of the three-dimensional structure of the skeletal muscle Ca2+-release channel in an open state using electron cryomicroscopy and angular reconstitution. In contrast to our reconstruction of the channel in its closed state, the density map of the channel driven towards its open state, by the presence of Ca2+ and ryanodine, features a central opening in the transmembrane region-the likely passageway for Ca2+ ions from the sarcoplasmic reticulum to the cytosol. The opening of the channel is associated with a 4 degree rotation of its transmembrane region with respect to its cytoplasmic region, and with significant mass translocations within the entire cytoplasmic region of the channel tetramer.

Animals↗
PubMed1995

Electron cryomicroscopy and angular reconstitution used to visualize the skeletal muscle calcium release channel.

We exploit the random orientations of ice-embedded molecules imaged in an electron cryomicroscope to determine the three-dimensional structure of the Ca(2+)-release channel from the sarcoplasmic reticulum (SR) in its closed state, without tilting the specimen holder. Our new reconstruction approach includes an exhaustive search of all different characteristic projection images in the micrographs and the assignment of Euler angle orientations to these views. The 30 A map implied reveals a structure in which the transmembrane region exhibits no apparent opening on the SR lumen side. The extended cytoplasmic region has a hollow appearance and consists, in each monomer, of a clamp-shaped and a handle-shaped domain.

Animals↗
PubMed1995

Assembly of VP26 in herpes simplex virus-1 inferred from structures of wild-type and recombinant capsids.

The 1250 A diameter herpes simplex virus-1 (HSV-1) capsid shell consists of four major structural proteins, of which VP26 (approximately 12,000 M(r)) is the smallest. Using 400 kV electron cryomicroscopy and computer reconstruction, we have determined the three-dimensional structures of the wild-type capsid and a recombinant baculovirus-generated HSV-1 capsid which lacks VP26. Their difference map demonstrates the presence of VP26 hexamers attached to all the hexons in the wild-type capsid, and reveals that the VP26 molecule consists of a large and a small domain. Although both hexons and pentons are predominantly composed of VP5, VP26 is not present on the penton. Based on the interactions involving VP26 and the hexon subunits, we propose a mechanism for VP26 assembly which would account for its distribution. Possible roles of VP26 in capsid stability and DNA packaging are discussed.

Animals↗
PubMed1995

Three-dimensional structure of the acrosomal filament of Limulus sperm by 400 kV electron cryomicroscopy.

The acrosomal bundle of Limulus sperm was imaged by electron cryomicroscopy, and the three-dimensional structure of a filament computationally isolated from the bundle was determined by helical image reconstruction. The actin model of Holmes was fit into the map, and its interactions with scruin, the actin-binding and cross-linking protein, were studied. Scruin binds to two consecutive actins along the helix via subdomains 1 and 3. These interactions involve helix-loop-beta motifs that are present in both actin subdomains (in different monomers) in positions available for binding by the same scruin molecule as it wraps around the actin. Taking first the structural motif homology and then looking for sequence pattern similarities, a stretch of 12 out of 20 matches in hydrophobicity is found. Scruin itself has been found to have an internal tandem homology.

Acrosome↗
PubMed1994

Protein subunit structures in the herpes simplex virus A-capsid determined from 400 kV spot-scan electron cryomicroscopy.

The three-dimensional structure of the A-capsid of herpes simplex virus type-1 has been determined to a resolution of approximately 26 A by using 400 kV spot-scan electron cryomicroscopy and computer image reconstruction techniques. The density map of the capsid has revealed several new structural details in the protein subunits of pentons, hexons, and triplexes. Our structural analysis has provided further evidence for the assignment of the four major capsid proteins to these various subunits. VP5, a 150 kDa major capsid protein that makes up both the penton and the bulk of the hexon subunits, has three domains: an upper diamond-shaped domain, a middle stem-like domain, and a lower anchoring domain. Structural differences are noticeable between the VP5 subunits in various quasi-equivalent environments. A horn-shaped mass density present at the distal end of each hexon subunit but missing from the penton subunit has been assigned to VP26, a minor 12 kDa protein. The six types of triplexes have similar, but not identical, features that include two legs and an upper domain that has a tail, which are interpreted to be formed from two copies of VP23 (36 kDa) and one copy of VP19c (57 kDa), respectively. Each triplex has two arms that interact with the adjacent VP5 subunits, and the modes of interaction vary among the quasi-equivalent triplexes. The 25 A-thick floor of the capsid is formed by the close association of the lower domains of subunits from the hexons, pentons, and triplexes. The interior of the capsid is accessible through the trans-capsomeric channels and the holes at the base of each triplex. These openings may play a role in the transport of genomic DNA and scaffolding proteins during capsid morphogenesis.

Animals↗
PubMed1994

Electron cryomicroscopy of Bacillus stearothermophilus 50 S ribosomal subunits crystallized on phospholipid monolayers.

50 S ribosomal subunits from Bacillus stearothermophilus have been crystallized as 2-dimensional periodic arrays on phospholipid monolayer films at the water-air interface. These crystals were preserved in vitreous ice and imaged with 100 keV electrons under low dose and low temperature conditions. The unit cell parameters of the crystals are a = 371.3(+/- 3.8) A, b = 152.3(+/- 1.6) A, gamma = 96.3(+/- 1.0) degrees. Some of the image arrays of these crystals have twofold rotational symmetry with a phase residual of less than 25 degrees. The mean figure of merit of the merged structure factors from these image arrays out to 20 A resolution is higher than 0.87. The 2-dimensional projection map shows a level of detail not seen in previous structural studies of the 50 S ribosome subunit. Some of these features may be related to the current 3-dimensional model of the subunit. This analysis illustrates the potential of using the electron crystallographic approach for determining the 3-dimensional structure of the 50 S ribosomal subunit crystallized on a monolayer surface. In addition, the structural information retrieved by electron crystallography might be useful for phasing X-ray data towards an atomic resolution model of the ribosome.

Crystallography↗
PubMed1994

Structural studies of viruses by electron cryomicroscopy.

Electron cryomicroscopy is a unique biophysical technique for studying molecular structures of viruses which are difficult to analyze by x-ray diffraction. The structural information derived from the low resolution reconstructions of viruses has so far been useful to understand various functional properties of the viruses such as antibody neutralization, receptor binding and assembly. Electron cryomicroscopy has enabled the visualization of the four core alpha helices of the coat protein in tobacco mosaic virus. This represents the highest resolution detail of a virus studied by electron cryomicroscopy. The prospects of attaining similar resolution beyond 10 A for spherical viruses as well are encouraging, with newly available instrumentation, data collection and processing procedures.

Cryopreservation↗
PubMed1994

Electron cryomicroscopy and digital image processing of lipoprotein(a).

Electron cryomicroscopy was used to study the structure of human lipoprotein(a) (Lp(a)), a plasma lipoprotein implicated in cardiovascular disease. An individual Lp(a) particle consists of a neutral lipid core within a shell of phospholipid, cholesterol and glycoprotein. In principle, electron cryomicroscopy images of single particles should contain structural detail attributable to the density differences among these components and the surrounding buffer. We observed such structural detail in images of frozen, hydrated Lp(a) particles. Lp(a) particles appeared to be roughly spherical in shape with an average diameter of 210 A. As is generally true for unstained samples in vitreous ice, imaged with a low electron dose, these images have low contrast with low signal-to-noise ratios. To increase the signal-to-noise ratio, we averaged classes of similar particles. We began with a set of 5813 randomly oriented Lp(a) particles and generated classes using a linear multivariate statistical method, followed by hierarchical ascendant classification. Our initial classification, based on only the first eight eigenvectors, separated particles on the basis of gross size and shape. After a rough reference-free alignment step, a second classification used the finer details in the images. This approach yielded class averages with structural detail only faintly visible in the raw, single images.

Freezing↗
PubMed1994

Three-dimensional structure of a single filament in the Limulus acrosomal bundle: scruin binds to homologous helix-loop-beta motifs in actin.

Frozen, hydrated acrosomal bundles from Limulus sperm were imaged with a 400 kV electron cryomicroscope. Segments of this long bundle can be studied as a P1 crystal with a unit cell containing an acrosomal filament with 28 actin and 28 scruin molecules in 13 helical turns. A novel computational procedure was developed to extract single columns of superimposed acrosomal filaments from the distinctive crystallographic view. Helical reconstruction was used to generate a three-dimensional structure of this computationally isolated acrosomal filament. The scruin molecule is organized into two domains which contact two actin subunits in different strands of the same actin filament. A correlation of Holmes' actin filament model to the density in our acrosomal filament map shows that actin subdomains 1, 2, and 3 match the model density closely. However, actin subdomain 4 matches rather poorly, suggesting that interactions with scruin may have altered actin conformation. Scruin makes extensive interactions with helix-loop-beta motifs in subdomain 3 of one actin subunit and in subdomain 1 of a consecutive actin subunit along the genetic filament helix. These two actin subdomains are structurally homologous and are closely spaced along the actin filament. Our model suggests that scruin, which is derived from a tandemly duplicated gene, has evolved to bind structurally homologous but non-identical positions across two consecutive actin subunits.

Acrosome↗
PubMed1993

Three-dimensional structure of a membrane-containing virus.

The structure of Sindbis virus was determined by electron cryomicroscopy. The virion contains two icosahedral shells of viral-encoded proteins separated by a membrane bilayer of cellular origin. The three-dimensional structure of the ice-embedded intact Sindbis virus, reconstructed from electron images, unambiguously shows that proteins in both shells are arranged with the same icosahedral lattice of triangulation number T = 4. These studies also provide structural evidence of contact between the glycoprotein and the nucleocapsid protein across the membrane bilayer. The structural organization of Sindbis virus has profound implications for the morphogenesis of the alphaviruses. The observed interactions confirm stoichiometric and specific protein associations that may be crucial for virion stability and predict a mechanism for assembly.

Animals↗
PubMed1993

Three-dimensional visualization of the rotavirus hemagglutinin structure.

Three-dimensional structures of a native simian and reassortant rotavirus have been determined by electron cryomicroscopy and computer image processing. The structural features of the native virus confirm that the hemagglutinin spike is a dimer of VP4, substantiated by in vivo radiolabeling studies. Exchange of native VP4 with a bovine strain equivalent results in a poorly infectious reassortant. No VP4 spikes are detected in the three-dimensional reconstruction of the reassortant. The difference map between the two structures reveals a novel large globular domain of VP4 buried within the virion that interacts extensively with the intermediate shell protein, VP6. Our results suggest that assembly of VP4 precedes that of VP7, the major outer shell protein, and that VP4 may play an important role in the receptor recognition and budding process through the rough endoplasmic reticulum during virus maturation.

Animals↗
PubMed1993

Three-dimensional transformation of capsids associated with genome packaging in a bacterial virus.

Three-dimensional structures of the empty procapsid and the mature capsid of the Salmonella bacteriophage P22 have been determined to a resolution of 28 A using electron cryomicroscopy and computer image processing. The coat subunits in both the structures are arranged as pentamers and hexamers on a T = 7 icosahedral lattice. The two structures display significant differences in shape, size and intersubunit interactions. The empty procapsid is spherical in contrast to the distinctly larger and polyhedral mature capsid. The empty procapsid structure exhibits holes at all the quasi sixfold positions that are absent in the mature capsid. These holes may be the exit ports for scaffolding subunits. Detailed comparisons of the two structures indicate that extensive structural changes take place during maturation in all seven quasi-equivalent subunits. These changes cause flattening of the icosahedral facets, capsid expansion and closing of the holes. This process results in a stable and impenetrable capsid that protects the bacterial genome.

Bacteriophage P22↗