Dynamics of electronic transfer processes at metal/insulator interfaces.
Explore the source record for details and available documents.
Biomedical subjects
Publications and source records attributed to W Berthold.
Explore the source record for details and available documents.
We demonstrate the existence of buried image-potential states at the interface between thick Ar films and a Cu(100) substrate. The electron dynamics of these solid-solid interface states, energetically located above the vacuum level in the band gaps of both materials, could be investigated with time-resolved two-photon photoemission for an Ar layer thickness up to 200 A. Relaxation on time scales between 40 and 200 fs occurs via two distinct channels, resonant tunneling through the insulating layer into the vacuum and electron-hole pair decay in the metal.
The effect of an atomically thin Ar layer on the image-potential states on Cu(100) surfaces is studied in a joint experimental-theoretical study, allowing a detailed analysis of the interaction between a surface electron and a thin insulator layer. A microscopic theoretical description of the Ar layer is developed based on mutually polarizing Ar atoms. Account of the 3D Ar layer structure allows one to predict energies and lifetimes of the image states in excellent agreement with the observations. The Ar layer, even as thin as one monolayer, is efficiently insulating the state from the metal.
The dependence of the inelastic lifetime of electrons in the image-potential states of Cu(100) on their momentum parallel to the surface has been studied experimentally by means of time- and angle-resolved two-photon photoemission and theoretically by evaluating the electron self-energy within the GW approximation. The pronounced decrease of the n = 1 lifetime from 40 fs at normal emission (k(parallel) = 0) to 20 fs for k(parallel) = 0.33 A(-1) cannot be accounted for by interband decay processes to bulk states. We show that intraband transitions within the image-state band give a contribution to this decrease comparable in magnitude with the interband channel.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
This paper focuses on the scale of validation studies that are performed in order to demonstrate viral clearance in downstream processing of biopharmaceutical products. A serious concern for rDNA-derived proteins from recombinant mammalian cell cultures and monoclonal antibodies (MAbs) derived from hybridoma cultures is the potential risk from contaminating retroviral particles or adventitious viruses. Accordingly the downstream process has to be designed to reduce a potential virus load significantly: by virus removal and by virus inactivation methods. Such viral clearance is essential for drug safety- and has to be validated. This means that the design of downstream processing has to take into consideration both the capability for viral clearance and the capability for validation respectively.
Animal cells from 80-L and 2000-L fed batch fermentations were removed by a prototype disc stack centrifuge in order to achieve a fast and reliable separation of solids from large quantities of cell culture fluids. The clarification capacity was excellent for animal cells but particles remained in the liquid phase and affected further downstream processing of the cell-free harvest fluid. No significant loss of product was observed. A number of parameters were monitored to optimize process conditions for use with animal cells.
Using a reflectron time-of-flight mass spectrometer, the ionization process in non-resonant Laser postionization Secondary Neutral Mass Spectrometry (SNMS) has been investigated. In particular, the postionization efficiencies (PIE) achieved by multi photon and single photon absorption have been compared by ionizing ten elements sputtered from a NIST standard reference material by excimer laser radiation of 248 nm, 193 nm and 157 nm. Only in the case of single photon ionization (SPI) the measured laser intensity dependence of the PIE can be understood quantitatively in terms of corresponding theory. From the results, absolute values of the SPI cross sections have been evaluated for atoms of nine elements, which show a total variation over about two orders of magnitude. Furthermore, even in the regime of high laser intensity, where the ionization of all atoms is completely saturated, different elements have been detected with relative sensitivity factors which scatter over about one order of magnitude. This has been attributed to element dependent variations of the effective ionization volume which are caused by the different kinetic energy and angular distributions of different sputtered atoms.
The concept of purity is addressed for proteins as drugs. In addition to a short description of general techniques, emphasis is given to a discussion of special protein impurities and contaminants from the host cell of process additives. This includes the host homologue to the product and biologically active molecules and the quantitation of host cell proteins. Of special concern are closely related non functional proteins from the gene for the protein product itself. They pose the question of how a 'pure' protein can be defined, and to what extent potential heterogeneities caused by the purification method represent a risk. Most relevant are 'invisible' contaminants such as potential virus including the BSE agent. Critical aspects will be discussed of the current rationale for a strategy to arrive at safe biological products. The limitations of current virus enumeration methods are discussed in relation to technical limitations to prove the efficiency of virus removal steps. Another limitation is the nature of the protein product and its individual resistance to denaturing conditions in virus inactivation steps. This is amply demonstrated by the lack of methods for inactivation of the BSE agent maintaining the native state of proteins. As a general recommendation it is proposed to base risk assessment on scientific data and come to scientifically defined criteria of acceptance in both the global and national communities. This will facilitate bringing new biopharmaceuticals to the benefit of patients in the shortest period of time.
Vaccines on the basis of mammalian cell cultures are of major importance for human and animal health. Therefore efforts are undertaken for the improved production of more effective vaccines. Of course, the main purpose of all these approaches is to save lives and improve the quality of life for human beings. However, there is also some remarkable effort in the food industry and the associated animal production, especially in the case of some Flaviviridal viruses (BVD), where > 80% of all cattle herds are found to be infected. These viruses can cause tremendous economic losses of calfs and embryos (Ames, 1990). Because of these facts, there is a continuous endeavour for improving the manufacturing of therapeutics or preventing agents such as vaccines for the treatment of cattle. The competitive economic situation and the specific market demands still require effective and high yield production methods, especially in the case of one of the most widespread viral diseases in cattle like BVD (Ames, 1990). We have succeeded in establishing an improved method for the production of BVD on the basis of a continuous fermentation mode, that consist of modifications of the corresponding process and media improvements.
Separation of product from secreting mammalian cells in the culture both means the transition from product generation to product isolation. This interface within a biotech production process has to perform a proper solid/liquid phase separation of the cell suspension to make the product containing fluid amenable for further purification. These subsequent steps require fluid with low occurrence of contaminants in order to function properly. The goal of this study was to evaluate some economic and fast cell separation methods for the preparation of a product fluid ready for use in further ultrafiltration and chromatographic processes. We have performed experiments to test the usefulness of disc stack centrifuges and tangential flow microfiltration units at large scale. Both systems revealed outstanding prospects with regard to throughput and scale up properties. However, the centrificgation did not lead to a fluid sufficiently free of particles for direct ultrafiltration or chromatography. Thus, an additional filtration step was necessary. On the other hand microfiltration led to an acceptable quality of process fluid directly. By optimisation of process parameters an effective, reproducible and robust cell separation can be obtained. However, our experience has been that such optimal conditions are somewhat specific for a narrow range. Thus, even the equipment functioning well with one type of cell would possibly not perform as well with another cell or even with the same cell under conditions slightly different to the usual situation.
Explore the source record for details and available documents.
The first defined sequential epitope of the tissue plasminogen activator (t-PA) was determined by a monoclonal antibody against a synthetic peptide segment corresponding to peptide sequence 341-354 of t-PA. This segment was selected by computer assisted epitope prediction. Balb/c mice were immunized with catalase-peptide and tripalmitoyl-S-glyceryl-cys-teinyl-seryl-peptide conjugates. A monoclonal antibody derived from this immunization was reactive with native recombinant t-PA (rt-PA) and reduced carboxymethylated recombinant t-PA (RCM rt-PA). The sequential epitope was detected by Pepscan method using overlapping octa- and nonapeptides. By fine epitope mapping with tetra-, penta-, hexa- and heptapeptides the epitope was minimized to the pentapeptide EEEQK (347-351). Replacement set analysis confirmed the importance of this amino acid sequence, especially of the amino acid E348, for antibody binding. Functional assays of rt-PA were not affected by this antibody indicating that the epitope has no influence on the enzymatic center and the binding site of the inhibitor. The analysis demonstrates that the predicted recognition site of the monoclonal antibody 17-134/11 is exposed on the surface of the native rt-PA molecule.
The safety of a patient who is the recipient of protein drugs has to be assured. A "wrong" protein is thought to represent a great risk. The philosophy of testing strategies related to gene stability with product safety will be discussed in the light of experimental data available today. Although all mammalian cell lines used in the production of biologicals including recombinant DNA-derived lines have been produced from individual clones (functional monoclonality) they have been found to be heterogenous with regard to the genomic content (number of chromosomes, characteristics of identifiable chromosomes and position and number of integrated recombinant sequences). The verification of the presence of correct gene in a production cell line constitutes a well accepted and useful test, especially if derived by "population sequencing". A batch not related repeated confirmation of this fact cannot lead to any additional assurance for the correctness of all proteins constituting a given product beyond the level provided by cheminal testing. In contrast to this obvious and unavoidable heterogeneity in cellular genomes, the coding regions of genes have not been shown to change. Evidence is available to demonstrate the consistency of protein products originating from recombinant (and hybridoma) cell lines, e.g. more than 500,000 patients have received and tolerated rtPA well.
Explore the source record for details and available documents.