Search PubMed⌕ Search

Biomedical subjects

Vladimir V Tsukruk

Publications and source records attributed to Vladimir V Tsukruk.

At least 19 recordsLinked to original sources
PubMed2007

Thermoresponsive reversible behavior of multistimuli pluronic-based pentablock copolymer at the air-water interface.

Surface behavior of the pH- and thermoresponsive amphiphilic ABCBA pentablock copolymer has been studied with respect to the environmental conditions. We demonstrate that the pentablock copolymer poly((diethylaminoethyl methacrylate)-b-(ethylene oxide)-b-(propylene oxide)-b-(ethylene oxide)-b-(diethylaminoethyl methacrylate)) possesses reversible temperature changes at the air-water interface in a narrow pH range of the water subphase. Significant diversity in the surface morphology of pentablock copolymer monolayers at different pH and temperatures observed were related to the corresponding reorganization of central and terminal blocks. Remarkable reversible variations of the surface pressure observed for the Langmuir monolayers at pH 7.4 in the course of heating and cooling between 27 and 50 degrees C is associated with conformational transformations of terminal blocks crossing the phase line in the vicinity of the lower critical solution temperature point. The observed thermoresponsive surface behavior can be exploited for modeling of the corresponding behavior of pentablock copolymers adsorbed onto various biointerfaces for intracellular delivery for deeper understanding of stimuli-responsive transformations relevant to controlled drug and biomolecules release and retention.

Journal Article↗
PubMed2006

Langmuir-Blodgett monolayers of gold nanoparticles with amphiphilic shells from V-shaped binary polymer arms.

Gold nanoparticles functionalized with amphiphilic polybutadiene-poly(ethylene glycol) (PB-PEG) V-shaped arms formed stable Langmuir monolayers at the air-water and the air-solid interfaces. At these interfaces, the binary arms vertically segregated into a dense polymer corona, which surrounded the gold nanoparticles, preventing their large-scale agglomeration and keeping individual nanoparticles well-separated from each other and forming flattened, pancake nanostructures. The presence of both PEG and PB chains in the close proximity to the gold core was confirmed by surface enhanced Raman spectroscopy, whereas the AFM phase contrast images revealed the presence of 2 nm gold cores surrounded by the polymer shell with the diameter of 11 nm. We suggest that the amphiphilic shell drives their spontaneous organization into discrete 2D pancake-like hybrid structures that measured up to 10 microm in diameter and had a high packing density of gold clusters.

Journal Article↗
PubMed2006

Surface morphologies of Langmuir-Blodgett monolayers of PEOnPSn multiarm star copolymers.

Star polymers composed of equal numbers of poly(ethylene oxide) (PEO) and polystyrene (PS) arms with variable lengths and a large (up to 38 total) number of arms, PEO(n)PS(n), have been examined for their ability to form domain nanostructures at the air-water and air-solid interfaces. All PEO(n)PS(n) star polymers formed stable Langmuir-Blodgett (LB) monolayers transferable to a solid substrate. A range of nanoscale surface morphologies have been observed, ranging from cylindrical to circular domains to bicontinuous structures as the weight fraction of the PEO block varied from 19% to 88% and n from 8 to 19. For the PS-rich stars and at elevated surface pressure, a two-dimensional supramolecular netlike nanostructure was formed. In contrast, in the PEO-rich star polymer with the highest PEO content, we observed peculiar dendritic superstructures caused by intramolecular segregation of nonspherical core-shell micellar structures. On the basis of Langmuir isotherms and observed monolayer morphologies, three different models of possible surface behavior of the star polymers at the interfaces were proposed.

Journal Article↗
PubMed2006

Formation of silver nanoparticles at the air-water interface mediated by a monolayer of functionalized hyperbranched molecules.

Nanofibrillar micellar structures formed by the amphiphilic hyperbranched molecules within a Langmuir monolayer were utilized as matter for silver nanoparticle formation from the ion-containing water subphase. We observed that silver nanoparticles were formed within the multifunctional amphiphilic hyperbranched molecules. The diameter of nanoparticles varied from 2-4 nm and was controlled by the core dimensions and the interfibrillar free surface area. Furthermore, upon addition of potassium nitrate to the subphase, the Langmuir monolayer templated the nanoparticles' formation along the nanofibrillar structures. The suggested mechanism of nanoparticle formation involves the oxidation of primary amino groups by silver catalysis facilitated by "caging" of silver ions within surface areas dominated by multibranched cores. This system provides an example of a one-step process in which hyperbranched molecules with outer alkyl tails and compressed amine-hydroxyl cores mediated the formation of stable nanoparticles placed along/among/beneath the nanofibrillar micelles.

Journal Article↗
PubMed2006

Assembling of dense fluorescent supramolecular webs via self-propelled star-shaped aggregates.

We report a novel mechanism of assembly of dendronized rod molecules into a dense supramolecular fluorescencent web featuring self-propelled mechanistic inward motion of star-shaped aggregates within a solution droplet. We suggest that such a motion (observed in real time) is caused by the self-repulsion of the growing star-shaped nuclei from the liquid-solid-air interface in the course of one-dimensional growth of the anchored arms. An intriguing mechanism discovered here involves microscopic (hundred micrometers) directional motion of the microscopic aggregates driven by one-dimensional molecular assembly, which opens a new venue for guided assembly of dense mesoscopic supramolecular webs. Such assemblies can serve as interesting microfluidic networks, a web of optical switches, and model systems for studying intercellular communication.

Journal Article↗
PubMed2006

Polymeric nanolayers as actuators for ultrasensitive thermal bimorphs.

Polymeric nanolayers are introduced here as active, thermal-stress mediating structures facilitating extremely sensitive thermal detection based upon the thermomechanical response of a bimaterial polymer-silicon microcantilever. To maximize the bimaterial bending effect, the microcantilever bimorph is composed of stiff polysilicon, with a strongly adhered polymer deposited via plasma-enhanced chemical vapor deposition. The polymer layers with thickness ranging from 20 to 200 nm possess a rapid and pronounced response to temperature fluctuations due to intrinsic sensitive thermal behavior. We show that by taking advantage of the thermal stresses generated by the huge mismatch of material properties in the polymer-silicon bimorph, unprecedented thermal sensitivities can be achieved. In fact, the temperature resolution of our bimaterial microcantilevers approaches 0.2 mK with thermal sensitivity reaching 2 nm/mK; both parameters are more than an order of magnitude better than the current metal-ceramic design. This new hybrid platform overcomes the inherently limited sensitivity of current sensor designs and provides the basis to develop the ultimate uncooled IR microsensor with unsurpassable sensitivity.

Crystallization↗
PubMed2006

Mechanically tunable three-dimensional elastomeric network/air structures via interference lithography.

We show how to employ an interference lithographic template (ILT) as a facile mold for fabricating three-dimensional bicontinuous PDMS (poly(dimethylsiloxane)) elastomeric structures and demonstrate the use of such a structure as a mechanically tunable PDMS/air phononic crystal. A positive photoresist was used to make the ILT, and after infiltration with PDMS, the resist was removed in a water-based basic solution which avoided PDMS swelling or pattern collapse occurring during the ILT removal process. Since the period of the structure is approximately 1 microm, the density of states of gigahertz phonons are altered by the phononic PDMS/air crystal. Brillouin light scattering (BLS) was employed to measure phononic modes of the structure as a function of mechanical strain. The results demonstrate that the phononic band diagram of such structures can be tuned mechanically.

Air↗
PubMed2006

Liquid-crystalline processing of highly oriented carbon nanotube arrays for thin-film transistors.

We introduce a simple solution-based method for the fabrication of highly oriented carbon nanotube (CNT) arrays to be used for thin-film transistors. We exploit the liquid-crystalline behavior of a CNT solution near the receding contact line during tilted-drop casting and produced long-range nematic-like ordering of carbon nanotube stripes caused by confined micropatterned geometry. We further demonstrate that the performance of thin-film transistors based on these densely packed and uniformly oriented CNT arrays is largely improved compared to random CNTs. This approach has great potential in low-cost, large-scale processing of high-performance electronic devices based on high-density oriented CNT films with record electrical characteristics such as high conductance, low resistivity, and high career mobility.

Electric Impedance↗
PubMed2006

Complex buckling instability patterns of nanomembranes with encapsulated gold nanoparticle arrays.

The nanomechanical properties of micropatterned nanomembranes containing gold nanoparticle microarrays were investigated with the buckling instability method. An unusual, complex pattern of buckling instability was observed for the nanoscale polymeric films under compressive stresses. An intriguing two-stage wrinkling was observed for these nanoscale films with spatially correlated instabilities. Two concurrent strain-dependent buckling modes were observed above a certain critical strain. Transformation from conventional transversal buckling mode to zigzag buckling is attributed to the development of the biaxial stress along the boundary lines for micropatterned areas. The binary buckling pattern observed here allowed the "one-shot" evaluation of the elastic moduli of two compositionally different regions (with and without gold nanoparticles).

Computer Simulation↗
PubMed2005

Langmuir and grafted monolayers of photochromic amphiphilic monodendrons of low generations.

Four generations of monodendrons with multiple dodecyl alkyl tails (AA-N, N representing number of alkyl tails from 1 to 8), an azobenzene spacer group, and a carboxylic acid polar head have been studied at the air-water and air-solid interface using AFM, GIXD, X-ray reflectivity, and UV-vis spectrometry. The one and two tail molecules formed orthorhombic lateral packing with long-range intramonolayer ordering. Good agreement between molecular models and thickness measurements indicated that the one and two tail molecules orient along the surface normal. The increase in the cross-sectional mismatch caused by the presence of the multiple chains for the higher generations disrupted the long-range ordering and forced the alkyl tails to adopt quasi-hexagonal structure. The higher generations (AA-4 and AA-8) formed a kinked structure with the alkyl tails oriented perpendicular to the surface with the azobenzene group tilted at a large degree toward the surface. The photoisomerization behavior in dilute solutions, at the air-water interface, and for grafted layers demonstrated that lower generation monodendrons maintained the photochromic behavior after chemical grafting to the silicon substrates, although the confinement of the molecules in monolayers significantly increased the reorganization time.

Journal Article↗
PubMed2005

Surface enhanced Raman scattering monitoring of chain alignment in freely suspended nanomembranes.

The molecular chain reorganization in freely standing membranes with encapsulated gold nanoparticles was studied with surface enhanced Raman scattering (SERS) in the course of their elastic deformations. The efficient SERS was enabled by optimizing the design of gold nanoparticle forming chainlike aggregates, thus creating an exceptional ability to conduct in situ monitoring. Small deformations resulted in the radial orientation of side phenyl rings of polymer backbones while larger deflections led to the polymer chains bridging adjacent nanoparticles within one-dimensional aggregates.

Journal Article↗
PubMed2005

In-situ observation of switchable nanoscale topography for y-shaped binary brushes in fluids.

Direct, in-fluid observation of the surface morphology and nanomechanical properties of the mixed brushes composed of Y-shaped binary molecules PS-PAA revealed nanoscale network-like surface topography formed by coexisting stretched soluble PAA arms and collapsed insoluble PS chains in water. Placement of Y-shaped brushes in different fluids resulted in dramatic reorganization ranging from soft repellent layer covered by swollen PS arms in toluene to an adhesive, mixed layer composed of coexisting swollen PAA and collapsed PS arms in water. These binary layers with the overall nanoscale thickness can serve as adaptive nanocoatings with stimuli-responsive properties.

Acrylic Resins↗
PubMed2004

Ultrathin binary grafted polymer layers with switchable morphology.

Polymer surface layers comprised of mixed chains grafted to a functionalized silicon surface with a total layer thickness of only 1-3 nm are shown to exhibit reversible switching of their structure. Carboxylic acid-terminated polystyrene (PS) and poly (butyl acrylate) (PBA) were chemically attached to a silicon surface that was modified with an epoxysilane self-assembled monolayer by a "grafting to" routine. While one-step grafting resulted in large, submicron microstructures, a refined, two-step sequential grafting procedure allowed for extremely small spatial dimensions of PS and PBA domains. By adjusting the grafting parameters, such as concentration of each phase and molecular weight, very finely structured surfaces resulted with roughly 10-nm phase domains and less than 0.5-nm roughness. Combining the glassy PS and the rubbery PBA, we implemented a design approach to fabricate a mixed brush from two immiscible polymers so that switching of the surface nanomechanical properties is possible. Post-grafting hydrolysis converted PBA to poly(acrylic acid) to amplify this switching in surface wettability. Preliminary tribological studies showed a difference in wear behavior of glassy and rubbery surface layers. Such switchable coatings have practical applications as surface modifications of complex nanoscale electronic devices and sensors, which is why we restricted total thickness for potential nanoscale gaps.

Journal Article↗
PubMed2004

Interfacial micellar structures from novel amphiphilic star polymers.

An amphiphilic heteroarm star polymer containing 12 alternating hydrophobic/hydrophilic arms of polystyrene (PS) and poly(acrylic acid) (PAA) connected to a well-defined rigid aromatic core was studied at the air-water and the air-solid interfaces. At the air-water interface, the molecules spontaneously form pancakelike micellar aggregates which measure up to several microns in diameter and 5 nm in thickness. Upon reduction of the surface area per molecule to 7 nm2, the two-dimensional micelles merged into a dense monolayer. We suggest that confined phase separation of dissimilar polymer arms occurred upon their segregation on the opposite sides of the rigid disklike aromatic core, forcing the rigid cores to adopt a face-on orientation with respect to the interface. Upon transfer onto solid supports the PS chains face the air-film interface making it completely hydrophobic, and the PAA chains were found to collapse and form a thin flattened underlayer. This study points toward new strategies to create large 2D microstructures with facial amphiphilicity and suggests a profound influence of star molecular architecture on the self-assembly of amphiphiles at the air-water interface.

Acrylic Resins↗
PubMed2004

Freely suspended nanocomposite membranes as highly sensitive sensors.

Highly sensitive sensor arrays are in high demand for prospective applications in remote sensing and imaging. Measuring microscopic deflections of compliant micromembranes and cantilevers is developing into one of the most versatile approaches for thermal, acoustic and chemical sensing. Here, we report on an innovative fabrication of compliant nanocomposite membranes with nanoscale thickness showing extraordinary sensitivity and dynamic range, which makes them candidates for a new generation of membrane-based sensor arrays. These nanomembranes with a thickness of 25-70 nm, which can be freely suspended over large (hundred micrometres) openings are fabricated with molecular precision by time-efficient, spin-assisted layer-by-layer assembly. They are designed as multilayered molecular composites made of a combination of polymeric monolayers and a metal nanoparticle intralayer. We demonstrate that these nanocomposite membranes possess unparalleled sensitivity and a unique autorecovering ability. The membrane nanostructure that is responsible for these outstanding properties combines multilayered polymer/nanoparticle organization, high polymer-chain orientation, and a pre-stretched state.

Gold↗
PubMed2004

Assembling of amphiphilic highly branched molecules in supramolecular nanofibers.

We found that the amplification of weak multiple interactions between numerous peripheral branches of irregular, flexible, polydisperse, and highly branched molecules can facilitate their self-assembly into nanofibrillar micellar structures at solid surfaces and the formation of perfect long microfibers in the course of crystallization from solution. The core-shell architecture of the amphiphilic dendritic molecules provides exceptional stability of one-dimensional nanofibrillar structures. The critical condition for the formation of the nanofibrillar structures is the presence of both alkyl tails in the outer shell and amine groups in the core/inner shell. The multiple intermolecular hydrogen bonding and polar interactions between flexible cores stabilize these nanofibers and make them robust albeit flexible. This example demonstrates that one-dimensional supramolecular assembling at different spatial scales (both nanofibers and microfibers) can be achieved without a tedious, multistep synthesis of shape-persistent molecules.

Journal Article↗