Biomedical subjects

Vinayak P Dravid

Publications and source records attributed to Vinayak P Dravid.

10 recordsLinked to original sources

PubMed2006

MOSFET-Embedded microcantilevers for measuring deflection in biomolecular sensors.

A promising approach for detecting biomolecules follows their binding to immobilized probe molecules on microfabricated cantilevers; binding causes surface stresses that bend the cantilever. We measured this deflection, which is on the order of tens of nanometers, by embedding a metal-oxide semiconductor field-effect transistor (MOSFET) into the base of the cantilever and recording decreases in drain current with deflections as small as 5 nanometers. The gate region of the MOSFET responds to surface stresses and thus is embedded in silicon nitride so as to avoid direct contact with the sample solution. This approach, which offers low noise, high sensitivity, and direct readout, was used to detect specific binding events with biotin and antibodies.

Binding Sites↗

PubMed2006

Directed fabrication of radially stacked multifunctional oxide heterostructures using soft electron-beam lithography.

A versatile patterning approach based on electron-beam lithography (eBL) and solution deposition, termed soft-eBL, has been developed to fabricate radially stacked heterostructures of multifunctional oxides from their sol precursors. Well-defined nanorings of lead zirconate titanate (PZT) are fabricated on a variety of substrates such as noble metals (e.g., Au), semiconductors (e.g., Si), and oxide single crystals (e.g., SrTiO3), which were previously functionalized with appropriate self-assembled monolayers (SAMs). The undercut in the double-layer eBL resist and substrate functionalization with the SAM treatment play a vital role in the formation of the ring structures. The nanorings are then used as building block "containers" and ring-reservoirs are filled with a second sol (e.g., CoFe2O4) to form radially stacked composite ceramic heterostructures. The approach presented here does not require either feature alignment to realize heterostructures or the etching of ceramics, and is amenable to a variety of radially stacked composite heterostructures.

Crystallization↗

PubMed2006

Site-specific fabrication and epitaxial conversion of functional oxide nanodisk arrays.

Nanodisk arrays of technologically important magnetic (CoFe(2)O(4)) and ferroelectric (BaTiO(3)) oxides are fabricated on diverse substrates with well-defined size and separation using the soft-eBL approach. We demonstrate that below a certain pattern size, the as-deposited amorphous nanodisks can be readily converted into dense, single-crystal form that exhibit cube-on-cube heteroepitaxy with respect to the underlying single-crystal substrate. Such single-crystal disks show well-defined truncated-pyramid morphology that is consistent with Wulff construction. The mechanism of morphology development with the pattern size change is discussed. Localized characterization of the crystallinity, chemical composition, and magnetic behavior of the CFO nanodisk patterns are carried out using analytical transmission electron microscopy and magnetic force microscopy. Such solution-based epitaxial conversion of patterned arrays of multifunctional oxides has potential for viable cost-effective technological applications.

Ceramics↗

PubMed2005

Locally enhanced relative humidity for scanning probe nanolithography.

The formation of a water meniscus between a sharp tip and a solid surface is one of the prevailing requirements for scanning probe microscope (SPM)-based lithographies, such as dip-pen nanolithography (DPN) and conductive tip induced oxidation. The water meniscus functions as a medium for the oxidation of or mass transfer to the solid surface. Here we report a simple, efficient, and effective approach to enhance the local relative humidity and thus increase the size of the water meniscus by bringing a water-containing capillary tube to the proximity of the tip-surface contact area. The enhancement in local relative humidity is confirmed via an increase in the measured tip-surface adhesion forces and the widths of DPN generated parallel lines. Compared to the global control of relative humidity for the whole lithography system, the short distance between the "water reservoir" and the tip-surface contact area enables rapid increase in the local vapor pressure of water, less perturbation, and minimal erosion to the state-of-the-art electronics. As a result, most scanning probe lithography experiments at high relative humidity can now be performed in a reasonable time frame.

Letter↗

PubMed2005

Silica encapsulation and magnetic properties of FePt nanoparticles.

Core-shell nanoparticles have emerged as an important class of functional nanostructures with potential applications in many diverse fields, especially in health sciences. We have used a modified aqueous sol-gel route for the synthesis of size-selective FePt@SiO2 core-shell nanoparticles. In this approach, oleic acid and olyel amine stabilized FePt nanoparticles are first encapsulated through an aminopropoxysilane (APS) monolayer and then subsequent condensation of triethoxysilane (TEOS) on FePt particle surface. These well-defined FePt@SiO2 core-shell nanoparticles with narrow size distribution become colloidal in aqueous media, and can thus be used as carrier fluid for biomolecular complexes. In comparison, the scarce hydrophilic nature of oleic acid monolayers on FePt particle surface yields an edgy partial coating of silica when only TEOS is applied for the surface modification. The synthesized core-shell nanoparticles were characterized by direct techniques of high resolution transmission electron microscopy (HRTEM), EDS and indirectly via UV-vis absorption and FTIR studies. The FePt@SiO2 nanoparticles exhibit essential characteristics of superparamagnetic behavior, as investigated by SQUID magnetometry. The blocking temperatures (T(B)) of FePt and FePt@SiO2 (135 and 80 K) were studied using zero field cooled (ZFC)/field cooled (FC) curves.

Adsorption↗

PubMed2005

Nanoscale imaging of buried structures via scanning near-field ultrasound holography.

A nondestructive imaging method, scanning near-field ultrasound holography (SNFUH), has been developed that provides depth information as well as spatial resolution at the 10- to 100-nanometer scale. In SNFUH, the phase and amplitude of the scattered specimen ultrasound wave, reflected in perturbation to the surface acoustic standing wave, are mapped with a scanning probe microscopy platform to provide nanoscale-resolution images of the internal substructure of diverse materials. We have used SNFUH to image buried nanostructures, to perform subsurface metrology in microelectronic structures, and to image malaria parasites in red blood cells.

Animals↗

PubMed2005

Surface combustion microengines based on photocatalytic oxidations of hydrocarbons at room temperature.

The concept of a surface combustion microengine that is fuelled by volatile hydrocarbons at room temperature is demonstrated on a microcantilever covered with a thin layer of titanium oxide (TiO(2)). Exposing this microengine to ultraviolet (UV) radiation and hydrocarbon vapor produces controlled bending of the microcantilever as a result of differential stress produced by photocatalytic oxidation of organic molecules on the TiO(2) coating. Compared to the motion generated solely by UV radiation or hydrocarbon adsorption, the unique photocatalytic-mechanical effects in the presence of UV and hydrocarbon produce more work and exhibit fast response. The surface combustion based microengines would require less maintenance in minimally controlled field environment and could be potentially used in construction of miniature movable machines, conversion of solar and chemical energy to mechanical work, when extended to a large array of microcantilevers. We believe such microengines can be fuelled by a variety of molecules or mixtures due to the generally favorable photocatalytic reactivity of TiO(2), thus potentially offering a broad approach for mechanical work generation from multiple energy sources.

Journal Article↗

PubMed2004

Transparent conducting oxides: texture and microstructure effects on charge carrier mobility in MOCVD-derived CdO thin films grown with a thermally stable, low-melting precursor.

A series of low-melting, thermally stable cadmium metal-organic chemical vapor deposition (MOCVD) precursors have been synthesized, structurally and spectroscopically characterized, and implemented in growth of highly conductive and transparent CdO thin films. One member of the series, bis(1,1,1,5,5,5-hexafluoro-2,4-pentanedionato)(N,N-diethyl-N',N'-dimethyl-ethylenediamine)cadmium(II), Cd(hfa)(2)()(N,N-DE-N',N'-DMEDA), represents a particularly significant improvement over previously available Cd precursors, owing to the low melting point and robust thermal stability. High-quality CdO films were grown by MOCVD on glass and single-crystal MgO(100) between 300 and 412 degrees C. Film growth parameters and substrate surface have large effects on microstructure and electron carrier transport properties. Enhanced mobilities observed for highly biaxially textured films grown on MgO(100) vs glass are attributed, on the basis of DC charge transport and microstructure analysis, to a reduction in neutral impurity scattering and/or to a more densely packed grain microstructure. Although single-grained films grown on MgO(100) exhibit greater mobilities than analogues with discrete approximately 100 nm grains and similar texture, this effect is attributed, on the basis of charge transport and Hall effect measurements as well as optical reflectivity analysis, to differences in carrier concentration rather than to reduced grain boundary scattering. Unprecedented conductivities and mobilities as high as 11,000 S/cm and 307 cm(2)/V.s, respectively, are obtained for epitaxial single-grained films (X-ray diffraction parameters: fwhm(omega) = 0.30 degrees, fwhm(phi) = 0.27 degrees ) grown in situ on MgO(100) at a relatively low temperature (400 degrees C).

Journal Article↗

PubMed2003

Miniaturized chemical multiplexed sensor array.

Miniaturized tin oxide semiconductor sensors are fabricated directly by site-specific dip-pen nanopatterning using precursor inks derived from the sol-gel method. The good flow characteristics and strong affinity of the sols to measurement electrodes enable intimate contact. The measurable, reproducible, and proportionate changes in the resistance of the sensors when exposed to trace quantities of oxidative and reducing gases constitute the basis for such sensors. These sensors show rapid response and ultrafast recovery for the detection of nitrogen dioxide and acetic acid. Furthermore, an array of eight miniaturized sensors is created by doping the pristine tin-based sol ink with different metal ions; the different responses of each sensor to certain gases constitute a reference response spectrum that can be used to recognize the gas. Such recognition ability, instant response and rapid recovery, compact size, and integration with the current microelectronics platform make the miniaturized sensor array a significant development for the on-site and real-time detection of life-threatening gases.

Journal Article↗

PubMed2002

Moving beyond molecules: patterning solid-state features via dip-pen nanolithography with sol-based inks.

Herein, we described a new dip-pen nanolithography (DPN)-based method for the direct patterning of organic/inorganic composite nanostructures on silicon and oxidized silicon substrates. The approach works by the hydrolysis of metal precursors in the meniscus between an AFM tip and a surface according to the reaction 2MCln + nH2O --> M2On + 2nHCl; M = Al, Si, and Sn. The inks are hybrid composites of inorganic salts with amphiphilic block copolymer surfactants. Three proof-of-concept systems involving Al2O3, SiO2, and SnO2 nanostructures on silicon and silicon oxide surfaces have been studied. Arrays of dots and lines can be written easily with control over feature size and shape on the sub-200 nm level. The structures have been characterized by atomic force microscopy, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray analysis. This work is important because it opens up the opportunity for using DPN to deposit solid-state materials rather than simple organic molecules onto surfaces with the resolution of an AFM without the need for a driving force other than chemisorption (e.g., applied fields).

Aluminum Oxide↗