Search PubMed⌕ Search

Biomedical subjects

V K Gupta

Publications and source records attributed to V K Gupta.

At least 37 records · Page 2Linked to original sources
PubMed2004

Synthesis, characterization, and analytical application of zirconium(IV) selenoiodate, a new cation exchanger.

Zirconium(IV) selenoiodates have been synthesized under a variety of conditions. The most chemically and thermally stable sample is prepared by adding a mixture of aqueous solutions of 0.1 mol L(-1) potassium iodate and 0.1 mol L(-1) sodium selenite to aqueous solution of 0.1 mol L(-1) zirconium(IV) oxychloride. Its ion-exchange capacity for K+ and Pb2+ was found to be 3.20 and 2.35 meq g(-1) dry exchanger, respectively. The material has been characterized on the basis of chemical composition, pH titration, and thermogravimetric analysis. The effect on the exchange capacity of drying the exchanger at different temperatures has also been studied. The analytical importance of the material has been established by quantitative separation of Pb2+ from other metal ions.

Journal Article↗
PubMed2004

Removal of chlorophenols from wastewater using red mud: an aluminum industry waste.

Removal of toxic substances from wastewaters using low-cost alternatives to activated carbon is an important area in environmental sciences. Efforts have been made to convert red mud, an aluminum industry waste, into a low-cost potential adsorbent, and the final material has been used for the removal of phenol, 2-chlorophenol, 4-chlorophenol, and 2,4-dichlorophenol from wastewater. It is pertinent to mention that phenol and chlorophenols are highly carcinogenic and an priority class of pollutants which needs to be removed from effluents before discharge into water bodies. 2,4-Dichlorophenol and 4-chlorophenol are sorbed by the developed adsorbent up to 94-97%, while the removal of 2-chlorophenol and phenol was up to 50-81%. The removal of phenols and its derivatives was achieved up to 98% by column experiments at a flow rate of 0.5 mL/min. The order of removal was 2,4-dichlorophenol > 4-chlorophenol > 2-chlorophenol > phenol, and the removal takes place through a particle diffusion mechanism. The adsorption was found to be endothermic in nature and follows both Langmuir and Freundlich models. Estimation of the phenols was carried out by capillary electrophoresis, and the adsorbent has been successfully tried for the removal of chlorophenols from a wastewater. The developed process is very useful, economic, rapid, and reproducible for the removal of phenols.

Adsorption↗
PubMed2004

Removal of lead and chromium from wastewater using bagasse fly ash--a sugar industry waste.

An inexpensive and effective adsorbent was developed from bagasse fly ash, obtained from a sugar industry, for the dynamic uptake of lead and chromium. Lead and chromium are sorbed by the developed adsorbent up to 96-98%. The removal of these two metal ions up to 95-96% was achieved by column experiments at a flow rate of 0.5 mlmin(-1). The adsorption was found to be exothermic in nature. The adsorbent was successfully tried for the removal of lead and chromium from wastewater in our laboratory. The developed system for the removal of two ions is very useful, economic, rapid, and reproducible.

Journal Article↗
PubMed2003

Equilibrium uptake and sorption dynamics for the removal of a basic dye (basic red) using low-cost adsorbents.

Waste carbon slurries (generated in fertilizer plants) and blast furnace slag (generated in steel plants) have been converted into low-cost potential adsorbents. The adsorbents have been characterized and tried for the removal of the dye basic red from wastewater. Studies were performed at different pH to find the pH at which maximum adsorption occurs. Equilibrium isotherms were determined to assess the maximum adsorption capacity of the adsorbents. Adsorption capacities are compared for activated carbon developed from fertilizer waste and activated slag developed from blast furnace waste. The adsorption data are correlated with Freundlich and Langmuir isotherms in each system. The kinetics of adsorption depends on the adsorbate concentration and the physical and chemical characteristics of the adsorbent. Studies were conducted to delineate the effect of pH, temperature, initial absorbate concentration, particle size of the adsorbent, and solid-to-liquid ratio. The adsorption of basic red was found to be endothermic and first-order in nature.

Journal Article↗
PubMed2003

Utilization of industrial waste products as adsorbents for the removal of dyes.

A number of low cost adsorbents from steel and fertilizer industries wastes have been prepared and investigated for the removal of anionic dyes such as ethyl orange, metanil yellow and acid blue 113 from aqueous solutions. The results indicate that inorganic wastes, i.e. blast furnace dust, sludge and slag from steel plants are not suitable for the removal of organic materials, whereas a carbonaceous adsorbent prepared from carbon slurry of fertilizer industry was found to adsorb 198, 211 and 219mg/g of ethyl orange, metanil yellow and acid blue 113, respectively. The adsorption of dyes on this adsorbent was studied as a function of contact time, concentration, particle size and temperature by batch method. The adsorption isotherm conformed to Langmuir model and the adsorption was found to be exothermic and physical in nature. Kinetic data conforms to Lagergren's equation with good correlation coefficients varying from 0.9998 to 0.9999 indicating that the adsorption is a first-order process. The adsorption data on carbonaceous adsorbent was compared to a standard activated charcoal sample and it was found that the prepared adsorbent is about 80% as efficient as standard activated charcoal and therefore, can be used as low cost alternative ( approximately 100 US dollars per ton) for colour removal from effluents.

Adsorption↗
PubMed2003

Selective gene expression using a DF3/MUC1 promoter in a human esophageal adenocarcinoma model.

The efficacy of replication-deficient adenoviral vectors in gene therapy is confined to the number of tumor cells the vector infects. To focus and enhance the therapeutic efficacy, we employed a conditionally replication-competent adenoviral vector with a tissue-specific promoter, DF3/MUC1, in a human esophageal adenocarcinoma model. Our results demonstrate that Ad.DF3.E1A.CMV.TNF (Ad.DF3.TNF) specifically replicates in Bic-1 (DF3-producing cells) and mediates an enhanced biologic effect due to increased TNF-alpha in the same DF3-producing cells. We also show that the increased TNF-alpha interacts with ionizing radiation to produce greater tumor regression and a greater delay in tumor regrowth in Bic-1 (DF3-producing cells) compared to Seg-1 (DF3 non-producers). Tumor cell targeting using conditionally replication-competent adenoviral vectors with tumor-specific promoters to drive viral replication and deliver TNF-alpha provides a novel approach to enhancing tumor radiosensitivity.

Adenocarcinoma↗
PubMed2003

A simple and reliable semipreparative high-performance liquid chromatography technique for the isolation of marker-grade hyperforin from Hypericum perforatum L extract.

The present work describes isolation of bioactive lipophilic constituent [namely, hyperforin from St. John's wort (Hypericum perforatum L.)], of approximately 98% purity by semipreparative high-performance liquid chromatography (LC). The extraction, isolation, and analysis of the collected compound is performed without the use of antioxidants and inert gas atmospheres at all the stages. Hyperforin, separated isocratically on a 12microm semiprep column, is obtained in high purity, lyophilized after the removal of the organic phase, and preserved at a low temperature. The purity of the collected marker compound is estimated by the use of LC-mass spectrometry and spectroscopic techniques.

Bridged Bicyclo Compounds↗
PubMed2001

A novel pH- and time-based multi-unit potential colonic drug delivery system. I. Development.

A novel delivery system was developed for delivering drugs to the colon by selecting polymethacrylates with appropriate pH dissolution characteristics for the distal end of the small intestine and relying upon the relatively constant transit time of the small intestine. Pellets were prepared by powder layering of 5-aminosalicylic acid (5-ASA) on nonpareils (0.5-0.6 mm) in a conventional coating pan. Drug-layered pellets were coated with an inner layer of a combination of two pH-independent polymers Eudragit RL and RS (2:8), and an outer layer of a pH-dependent polymer, Eudragit FS. Scanning electron micrograph (SEM) pictures of the coated pellets showed the uniformity of both the coatings. The release profile of 5-ASA was studied in three phosphate buffers after a simulated gastric pre-soak for 2 h in pH 1.2 media. There was no drug release for 12 h at pH 6.5. There was a sustained release of 5-ASA for over 12 h both at pH 7.0 and 7.5 after a lag time at pH 7.0 and no lag time at pH 7.5. The release rate was faster at pH 7.5 than at pH 7.0. The delivery system demonstrated its potential for colonic delivery by resisting drug release until pH 6.5 and the combination of Eudragit RL and RS proved successful for the sustained delivery of 5-ASA at the expected pH of the colon.

Acrylic Resins↗
PubMed2001

A novel pH- and time-based multi-unit potential colonic drug delivery system. II. Optimization of multiple response variables.

The objective of this work was to optimize a novel potential colonic drug delivery system by using a statistical procedure. Pellets were prepared by powder layering of 5-aminosalicylic acid (5-ASA) on nonpareils (0.5--0.6 mm) in a coating pan. Drug-layered pellets were coated with an inner layer of a combination of Eudragit RL and RS and an outer layer of Eudragit FS in a fluidized-bed apparatus. Central composite design was used to study the effect of three independent variables. The proportion of the more hydrophilic polymer Eudragit RL had the most significant effect on drug release--higher proportion gave faster release; the amount of inner and outer coat did not have a significant effect on the rate of drug release at either 6 or 12 h in the range studied. A second order polynomial equation was fitted to the data, and the resulting equation was used to predict the responses in the optimal region. An optimized formulation was prepared and evaluated for individual responses. The experimental values of the response variables highly agreed with the predicted values. The results demonstrated the reliability of the model in the preparation of coated pellets having predictable drug release for colonic delivery of 5-ASA.

Acrylic Resins↗
PubMed2001

Removal of DDD and DDE from wastewater using bagasse fly ash, a sugar industry waste.

Bagasse fly ash, a waste from the sugar industry, was converted into an effective adsorbent and was used for the removal of DDD [2,2-Bis(4-chlorophenyl)-1,1-dichloroethane] and DDE [2,2-Bis(4-chlorophenyl)-1,1-dichloroethene] pesticides from wastewater. The DDD and DDE are removed by the developed adsorbent up to 93% at pH 7.0, with the adsorbent dose of 5 g/l of particle size 200-250 microns at 30 degrees C. The removal of these two pesticides was achieved up to 97-98% in column experiments at a flow rate of 0.5 ml/min. The adsorption was found to be exothermic in nature. The bagasse fly ash system has been used for the removal of DDD and DDE from the wastewater. The developed system is very useful, economic, and reproducible.

Carbon↗