Search PubMed⌕ Search

Biomedical subjects

Uwe H F Bunz

Publications and source records attributed to Uwe H F Bunz.

At least 19 recordsLinked to original sources

Cruciforms as functional fluorophores: response to protons and selected metal ions.

The photophysics of dialkylamino- and/or pyridine-containing functional chromophores, 1,4-distyryl-2,5-bis(ethynylaryl)benzenes (cruciforms) was investigated; their fluorescence quantum yields and emissive lifetimes were determined. Depending upon their substituents, the frontier molecular orbitals (FMOs) of these cruciforms are either congruent, i.e., HOMO and LUMO occupy the same real space, or disjoint, i.e., the HOMO is located on one branch of the cruciform while the LUMO is located on the second one. Donor-acceptor substitution leads to a disjoint FMO pattern, while the parent 1,4-distyryl-2,5-bis(phenylethynyl)benzene shows congruent FMOs. The photophysics of the cruciforms was investigated upon addition of either an excess of trifluoroacetic acid or an excess of selected metal (Mg(2+), Ca(2+), Mn(2+), Zn(2+)) trifluoromethanesulfonate salts. Addition of either metal ions or protons led to analogous but not identical changes in the spectroscopic properties of the investigated cruciforms. The collected data suggest that the metals bind preferentially at the aniline nitrogen and not at the electron-rich arene. The spatially separated FMOs permit the independent manipulation of the HOMO and the LUMO of such cruciforms. If the branches contain metal-complexing moieties, metal binding leads to either a hypsochromic or a bathochromic shift in emission via interaction of the metal cations with either the HOMO or the LUMO.

Journal Article↗

Reduced fluorescence quenching of cyclodextrin-acetylene dye rotaxanes.

An acetylene dye rotaxane with alpha-CD has been synthesized using the Heck-Cassar-Sonogashira-Hagihara-type reaction in aqueous solution. Free dye with tetracarboxylic acids is found to be highly sensitive to various metal ions, showing high Stern-Volmer constants, KSV. As CD encapsulation protects and stabilizes the threaded chromophore against an outside quencher, metal-insensitive biological tags are an obvious application for this class of molecules.

Journal Article↗

Supramolecular cruciforms.

By self-assembling fluorescent pyridyl cruciforms with bis-Pd-pincer complexes, supramolecular assemblies with attractive optical properties were synthesized; these assemblies show potential as electro-optical materials.

Journal Article↗

Modulating the sensory response of a conjugated polymer by proteins: an agglutination assay for mercury ions in water.

The complexes of a carboxylate-substituted poly(para-phenyleneethynylene) (PPE) with histone, bovine serum albumin, and papain were investigated. At higher concentrations, the proteins have a significant effect on the emission characteristics of the PPE. The electrostatic complexes formed from the PPE, and the proteins are agglutinated by different metal cations. The observed selectivities and sensitivities of these simple systems are most unusual; combination of the carboxylate-PPE and commercially available papain forms an electrostatic complex that is precipitated by mercury ions at concentrations above 10-5 mol L-1.

Alkynes↗

Synthesis of a peralkynylated pyrazino[2,3-g]quinoxaline.

[structure: see text] The synthesis of a hexaethynyl[2,3-g]pyrazinoquinoxaline and its crystal structure are reported. Starting from tetraaminobenzoquinone, condensation to bis(triisopropylsilyl)hexadiyne-2,3-dione affords 2,3,7,8-tetrakis(triisopropylsilylethynyl)pyrazino[2,3-g]quinoxaline-5,10-dione. Reaction with TIPS-CC-Li followed by reduction with hypophosphite in the presence of KI furnished the title molecule in a yield of 62%. Pd catalysis is not involved in any of these steps.

Journal Article↗

Nonspecific interactions of a carboxylate-substituted PPE with proteins. A cautionary tale for biosensor applications.

Two carboxylate-substituted, fluorescent (Phi = 0.08), water-soluble poly(p-phenyleneethynylene)s (PPE) and a water-soluble model compound were exposed to a series of proteins and bovine serum. While the anionic PPEs do not have any specific binding sites, they form stable complexes with histone, lysozyme, myoglobin, and hemoglobin. The complex formation was evidenced by fluorescence quenching. Bovine serum albumin does not quench the fluorescence of the PPEs but enhances it, probably due to its surfactant character. These results imply that the use of charged conjugated polymers as biosensors, while an attractive proposition, has to take into account strong nonspecific interactions between conjugated polymers and the host of proteins that is found in cells and complex biological fluids.

Alkynes↗

Switching of intramolecular charge transfer in cruciforms: metal ion sensing.

Three different cruciforms containing the 1,4-bis-4'-pyridylethynyl-2,5-distyrylbenzene or the 1,4-bis-phenylethynyl-2,5-distyrylbenzene unit were synthesized and investigated with respect to their metal sensing properties. Upon addition of metal cations to these cruciforms, either a bathochromic or hypsochromic shift in emission and absorption is observed. The shift depends on whether the metal coordinates preferentially to the pyridine or to the dibutylaniline branches of the cruciforms. The three cruciforms were exposed to a selection of metal cations in dichloromethane, and their emission was examined. The cruciforms show differential sensing of metal cations, that is, different metals can be specifically discerned upon exposure to three cruciforms but not when exposed to only one. The system can discern calcium from magnesium cations and silver from mercury or lithium cations.

Journal Article↗

Templated ceramic microstructures by using the breath-figure method.

We describe the synthesis of two cyclobutadiene(cyclopentadienyl)cobalt-containing poly(p-phenylene ethynylene)s (PPEs) and their use as precursors for stable ceramic surface coatings. Organometallic PPEs were shaped into hexagonally ordered assemblies by using the breath-figure method. Such breath figures can be washed away with an appropriate solvent. Upon pyrolysis at 500 degrees C under either nitrogen or air, the bubble arrays persist as ceramics and are insoluble in organic solvents or water. The formed pyrolyzed bubble arrays were analyzed by optical and scanning electron microscopy, as well as energy dispersive X-ray microanalysis (EDX). The composition of the ceramic materials is discussed based on EDX and IR data.

Journal Article↗

Sugar-poly(para-phenylene ethynylene) conjugates as sensory materials: efficient quenching by Hg2+ and Pb2+ ions.

Three polar poly(para-phenylene ethynylene)s (PPE) were synthesized by utilizing the Heck-Sonogashira protocol. Two of the PPEs carry beta-glucopyranose substituents. Depending upon the linker used between the glycol units and the backbone, the fluorescence of these PPEs can be quenched by Hg2+ and Pb2+ to a varying degree. Monomeric model compounds that are substituted with only one glucose unit are not efficiently quenched. The presence of many glucose substituents in one PPE assembly led to a large increase in the binding constant to Hg2+ and quenching of the fluorescence was amplified.

Alkynes↗

Pyridine-capped, oligomeric (o-phenyleneethynylene)s.

The synthesis, optical properties, and solid-state structures of a series of o-(aryleneethynylene) oligomers containing three to seven aryl units is described. The main chain in all examples is composed of between one and five 4,5-dimethoxybenzene rings which are capped on each end by 2-pyridyl rings. These oligomers demonstrate pH-dependent emission and absorption spectra. Single crystals were obtained from the aryleneethynylenes containing three to five arene rings. These single crystals were investigated by X-ray diffraction.

Journal Article↗

Cruciform pi-systems: effect of aggregation on emission.

The solid state properties of cruciform pentamers are examined in thin film preparation, in the single crystalline state and in nanoparticle formulations; emission behavior was found to vary substantially with the solid state morphology. This type of behaviour is an excellent way to manipulate the emissive properties of conjugated [small pi]-systems.

Journal Article↗

Permanent bubble arrays from a cross-linked poly(para-phenyleneethynylene): picoliter holes without microfabrication.

An azide-substituted poly(para-phenyleneethynylene) (PPE) 4 was prepared by the Heck-Cassar-Sonogashira-Hagihara method. Thin films of 4 form self-assembled bubble arrays from carbon disulfide solution utilizing the breath figure method. The as-formed porous films of 4 are soluble in common solvents, and the air bubbles are interconnected. Upon heating to 300 degrees C, 4 cross-links and the thin film turn into insoluble matrix with isolated bubbles. The cross-linking process has transformed the bubble arrays of 4 into insoluble picoliter beakers or picoliter vials, whose diameters are approximately 3.0 and 1.5 mum at the top and bottom, respectively.

Journal Article↗

Conformational and electronic engineering of twisted diphenylacetylenes.

[structure: see text] Three tethered diphenylacetylene derivatives were prepared by alkyne metathesis. In these cycles, the twist angle between the two benzene rings is variable and determined by the nature of the linker. The engineering of the twist angle leads to a change of the UV-vis spectra of the cycles. The larger the twist angle in the macrocycles, the more blue shifted their lambda(max) (UV-vis), the lower their fluorescence quantum yield, and the lower field shifted their (13)C NMR signals of the alkyne carbons are.

Journal Article↗