Search PubMed⌕ Search

Biomedical subjects

Ueli Aebi

Publications and source records attributed to Ueli Aebi.

At least 37 records · Page 2Linked to original sources
PubMed2005

Distinct subcellular location of the Ca2+-binding protein S100A1 differentially modulates Ca2+-cycling in ventricular rat cardiomyocytes.

Calcium is a key regulator of cardiac function and is modulated through the Ca2+-sensor protein S100A1. S100 proteins are considered to exert both intracellular and extracellular functions on their target cells. Here we report the impact of an increased intracellular S100A1 protein level on Ca2+-homeostasis in neonatal ventricular cardiomyocytes in vitro. Specifically, we compare the effects of exogenously added recombinant S100A1 to those resulting from the overexpression of a transduced S100A1 gene. Extracellularly added S100A1 enhanced the Ca2+-transient amplitude in neonatal ventricular cardiomyocytes (NVCMs) through a marked decrease in intracellular diastolic Ca2+-concentrations ([Ca2+]i). The decrease in [Ca2+]i was independent of sarcoplasmic reticulum Ca2+-ATPase (SERCA2a) activity and was probably the result of an increased sarcolemmal Ca2+-extrusion through the sodium-calcium exchanger (NCX). At the same time the Ca2+-content of the sarcoplasmic reticulum (SR) decreased. These effects were dependent on the uptake of extracellularly added S100A1 protein and its subsequent routing to the endosomal compartment. Phospholipase C and protein kinase C, which are tightly associated with this subcellular compartment, were found to be activated by endocytosed S100A1. By contrast, adenoviral-mediated intracellular S100A1 overexpression enhanced the Ca2+-transient amplitude in NVCMs mainly through an increase in systolic [Ca2+]i. The increased Ca2+-load in the SR was based on an enhanced SERCA2a activity while NCX function was unaltered. Overexpressed S100A1 colocalized with SERCA2a and other Ca2+-regulatory proteins at the SR, whereas recombinant S100A1 protein that had been endocytosed did not colocalize with SR proteins. This study provides the first evidence that intracellular S100A1, depending on its subcellular location, modulates cardiac Ca2+-turnover via different Ca2+-regulatory proteins.

Animals↗
PubMed2005

Characterization of the in vitro co-assembly process of the intermediate filament proteins vimentin and desmin: mixed polymers at all stages of assembly.

We have investigated the co-assembly properties of the intermediate filament (IF) proteins vimentin and desmin. First, the soluble complexes formed by both proteins separately in 5 mM Tris-HCl, pH 8.4, were characterized by analytical ultracentrifugation. In both cases, s-values of around 5 S were obtained corresponding to the formation of tetramers. However, at pH 7.5 and in the presence of 1 mM EDTA, both proteins behaved quite differently; whereas vimentin sedimented at 7.2 S, desmin assembled into much larger complexes of about 13 S. A mixture of equimolar amounts of vimentin and desmin in 8 M urea yielded, after reconstitution into 5 mM Tris-HCl, pH 7.5, and 1 mM EDTA, complexes exhibiting a sharp peak at 10.9 S. This intermediate s-value indicated that co-assembly into a distinct new set of complexes had occurred. As judged by electron microscopy and viscometry, these mixtures assembled into IFs with characteristics similar to those of pure vimentin and desmin. Furthermore, when vimentin and desmin tetramers were mixed in 5 mM Tris-HCl, pH 8.4, and subsequently subjected to IF assembly conditions, again "hybrid" filaments were obtained. Most interestingly, after 10 min of assembly, mass-per-length (MPL) measurements by scanning transmission electron microscopy yielded IFs with an MPL-peak value of 36 +/- 5 kDa/nm, hence closer to that of vimentin IFs (33 +/- 4 kDa/nm) than to that of desmin IFs (48 +/- 8 kDa/nm). Finally, when unit length-filaments (ULF) of vimentin and desmin were mixed and assembled further, the diameters of individual mature IFs formed exhibited a significantly higher degree of width inhomogeneity along their length than vimentin and desmin IFs as might be expected for a modular mode of assembly. Last but not least, atomic force microscopy provided further direct evidence that desmin IFs are able to fuse end-to-end with vimentin IFs. In summary, we have shown that vimentin and desmin are able to co-assemble at the dimer, tetramer, ULF and even the mature IF level.

Desmin↗
PubMed2005

Investigating native coronary artery endothelium in situ and in cell culture by scanning force microscopy.

The purpose of our studies is to better understand the morphology and functioning of the arteries and their changes in pathogenesis. The most frequently used imaging techniques are intravascular ultrasound, magnetic resonance imaging, and optical coherence tomography. These methods do not image cell-level structural details and only provide biomechanical properties indirectly. We present a new protocol for imaging the endothelial surface and measuring elastic properties of vascular tissue by scanning force microscopy. Full-thickness sections of native pig coronary arteries were prepared. In addition, cultured human umbilical vein endothelial cells were studied as an in vitro model system and for comparison. We encountered a variety of difficulties mostly due to the softness of vascular tissue which required significant adaptations of standard equipment: (i) a new specimen holder designed to stably immobilize the coronary arteries; (ii) a phase-contrast microscope incorporated for assessing the status of the cultured endothelial cells and positioning the scanning force microscope (SFM) tip at a site of interest; and (iii) a continuous exchange of the culture medium at 37 degrees C to assure viability of the cells in the SFM over extended times. We were thus able to investigate both fresh arterial tissue and living endothelial cells in a near-physiological environment. We present initial SFM images of vascular tissue at a spatial resolution similar to scanning electron microscopy, but which also provide a closer view of the bona fide structure of native tissue. Novel morphological features such as distinct granular particles were observed. Moreover, we report initial measurements of vascular tissue surface stiffness, obtained by indentation-type SFM.

Animals↗
PubMed2004

Crystal structure of the human lamin A coil 2B dimer: implications for the head-to-tail association of nuclear lamins.

Nuclear intermediate filaments (IFs) are made from fibrous proteins termed lamins that assemble, in association with several transmembrane proteins of the inner nuclear membrane and an unknown number of chromatin proteins, into a filamentous scaffold called the nuclear lamina. In man, three types of lamins with significant sequence identity, i.e. lamin A/C, lamin B1 and B2, are expressed. The molecular characteristics of the filaments they form and the details of the assembly mechanism are still largely unknown. Here we report the crystal structure of the coiled-coil dimer from the second half of coil 2 from human lamin A at 2.2A resolution. Comparison to the recently solved structure of the homologous segment of human vimentin reveals a similar overall structure but a different distribution of charged residues and a different pattern of intra- and interhelical salt bridges. These features may explain, at least in part, the differences observed between the lamin and vimentin assembly pathways. Employing a modeled lamin A coil 1A dimer, we propose that the head-to-tail association of two lamin dimers involves strong electrostatic attractions of distinct clusters of negative charge located on the opposite ends of the rod domain with arginine clusters in the head domain and the first segment of the tail domain. Moreover, lamin A mutations, including several in coil 2B, have been associated with human laminopathies. Based on our data most of these mutations are unlikely to alter the structure of the dimer but may affect essential molecular interactions occurring in later stages of filament assembly and lamina formation.

Amino Acid Sequence↗
PubMed2004

A pre-ribosome with a tadpole-like structure functions in ATP-dependent maturation of 60S subunits.

Analyses of isolated pre-ribosomes yielded biochemical "snapshots" of the dynamic, nascent 60S and 40S subunits during their path from the nucleolus to the cytoplasm. Here, we present the structure of a pre-60S ribosomal intermediate located in the nucleoplasm. A huge dynein-related AAA-type ATPase (Rea1) and the Rix1 complex (Rix1-Ipi1-Ipi3) are components of an extended (approximately 45 nm long) pre-60S particle. Antibody crosslinking in combination with electron microscopy revealed that the Rea1 localizes to the "tail" region and ribosomal proteins to the "head" region of the elongated "tadpole-like" structure. Furthermore, in vitro treatment with ATP induces dissociation of Rea1 from the pre-60S subunits. Rea1 and the Rix1 complex could mediate ATP-dependent remodeling of 60S subunits and subsequent export from the nucleoplasm to the cytoplasm.

Adenosine Triphosphate↗
PubMed2004

Molecular and biophysical characterization of assembly-starter units of human vimentin.

We have developed an assembly protocol for the intermediate filament (IF) protein vimentin based on a phosphate buffer system, which enables the dynamic formation of authentic IFs. The advantage of this physiological buffer is that analysis of the subunit interactions by chemical cross-linking of internal lysine residues becomes feasible. By this system, we have analyzed the potential interactions of the coiled-coil rod domains with one another, which are assumed to make a crucial contribution to IF formation and stability. We show that headless vimentin, which dimerizes under low salt conditions, associates into tetramers of the A(22)-type configuration under assembly conditions, indicating that one of the effects of increasing the ionic strength is to favor coil 2-coil 2 interactions. Furthermore, in order to obtain insight into the molecular interactions that occur during the first phase of assembly of full-length vimentin, we employed a temperature-sensitive variant of human vimentin, which is arrested at the "unit-length filament" (ULF) state at room temperature, but starts to elongate upon raising the temperature to 37 degrees C. Most importantly, we demonstrate by cross-linking analysis that ULF formation predominantly involves A(11)-type dimer-dimer interactions. The presence of A(22) and A(12) cross-linking products in mature IFs, however, indicates that major rearrangements do occur during the longitudinal annealing and radial compaction steps of IF assembly.

Buffers↗
PubMed2004

Human amylin oligomer growth and fibril elongation define two distinct phases in amyloid formation.

Human amylin (hA), a 37-amino-acid polypeptide, is one of a number of peptides with the ability to form amyloid fibrils and cause disease. It is the main constituent of the pancreatic amyloid deposits associated with type 2 diabetes. Increasing interest in early assembly intermediates rather than the mature fibrils as the cytotoxic agent has led to this study in which the smallest hA oligomers have been captured by atomic force microscopy. These are 2.3 +/- 1.9 nm in height, 23 +/- 14 nm in length, and consist of an estimated 16 hA molecules. Oligomers first grow to a height of about 6 nm before they begin to significantly elongate into fibrils. Congo red inhibits elongation but not the growth in height of hA oligomers. Two distinct phases have thus been identified in hA fibrillogenesis: lateral growth of oligomers followed by longitudinal growth into mature fibrils. These observations suggest that mature fibrils are assembled directly via longitudinal growth of full-width oligomers, making assembly by lateral association of protofibrils appear less likely.

Adsorption↗
PubMed2004

The S. cerevisiae HtrA-like protein Nma111p is a nuclear serine protease that mediates yeast apoptosis.

The yeast S. cerevisiae can undergo programmed cell death that exhibits the typical cellular markers of apoptosis. The mammalian HtrA2 protein was recently reported to mediate apoptosis in a serine-protease-dependent manner owing to its ability to antagonise the inhibitor of apoptosis protein XIAP. Here, we report the identification and characterisation of the S. cerevisiae HtrA-like protein, which we termed Nma111p (for nuclear mediator of apoptosis), as a mediator of yeast apoptosis. Nma111p is a nuclear protein that, under cellular stress conditions (i.e. at elevated temperature or after induction of apoptosis by H2O2), tends to aggregate inside the nucleus without its expression level being upregulated, suggesting that aggregation of Nma111p is correlated to its death-mediating character. Nma111p belongs to the HtrA family of serine proteases and its pro-apoptotic activity depends on its serine-protease activity. Yeast cells that lack Nma111p survive better at 50 degrees C than wild-type cells and the cells show no apoptotic hallmarks, such as chromatin condensation and fragmentation, or accumulation of reactive oxygen species, after the induction of apoptosis by H2O2. By contrast, overexpression of Nma111p enhances apoptotic-like cell death. Therefore, Nma111p, like its mammalian homologue HtrA2, mediates apoptosis.

Apoptosis↗
PubMed2004

The biology of desmin filaments: how do mutations affect their structure, assembly, and organisation?

Desmin, the major intermediate filament (IF) protein of muscle, is evolutionarily highly conserved from shark to man. Recently, an increasing number of mutations of the desmin gene has been described to be associated with human diseases such as certain skeletal and cardiac myopathies. These diseases are histologically characterised by intracellular aggregates containing desmin and various associated proteins. Although there is progress regarding our knowledge on the cellular function of desmin within the cytoskeleton, the impact of each distinct mutation is currently not understood at all. In order to get insight into how such mutations affect filament assembly and their integration into the cytoskeleton we need to establish IF structure at atomic detail. Recent progress in determining the dimer structure of the desmin-related IF-protein vimentin allows us to assess how such mutations may affect desmin filament architecture.

Amino Acid Sequence↗
PubMed2004

Dynamic elastic modulus of porcine articular cartilage determined at two different levels of tissue organization by indentation-type atomic force microscopy.

Cartilage stiffness was measured ex vivo at the micrometer and nanometer scales to explore structure-mechanical property relationships at smaller scales than has been done previously. A method was developed to measure the dynamic elastic modulus, |E(*)|, in compression by indentation-type atomic force microscopy (IT AFM). Spherical indenter tips (radius = approximately 2.5 microm) and sharp pyramidal tips (radius = approximately 20 nm) were employed to probe micrometer-scale and nanometer-scale response, respectively. |E(*)| values were obtained at 3 Hz from 1024 unloading response curves recorded at a given location on subsurface cartilage from porcine femoral condyles. With the microsphere tips, the average modulus was approximately 2.6 MPa, in agreement with available millimeter-scale data, whereas with the sharp pyramidal tips, it was typically 100-fold lower. In contrast to cartilage, measurements made on agarose gels, a much more molecularly amorphous biomaterial, resulted in the same average modulus for both indentation tips. From results of AFM imaging of cartilage, the micrometer-scale spherical tips resolved no fine structure except some chondrocytes, whereas the nanometer-scale pyramidal tips resolved individual collagen fibers and their 67-nm axial repeat distance. These results suggest that the spherical AFM tip is large enough to measure the aggregate dynamic elastic modulus of cartilage, whereas the sharp AFM tip depicts the elastic properties of its fine structure. Additional measurements of cartilage stiffness following enzyme action revealed that elastase digestion of the collagen moiety lowered the modulus at the micrometer scale. In contrast, digestion of the proteoglycans moiety by cathepsin D had little effect on |E(*)| at the micrometer scale, but yielded a clear stiffening at the nanometer scale. Thus, cartilage compressive stiffness is different at the nanometer scale compared to the overall structural stiffness measured at the micrometer and larger scales because of the fine nanometer-scale structure, and enzyme-induced structural changes can affect this scale-dependent stiffness differently.

Animals↗
PubMed2004

Intermediate filaments: molecular structure, assembly mechanism, and integration into functionally distinct intracellular Scaffolds.

The superfamily of intermediate filament (IF) proteins contains at least 65 distinct proteins in man, which all assemble into approximately 10 nm wide filaments and are principal structural elements both in the nucleus and the cytoplasm with essential scaffolding functions in metazoan cells. At present, we have only circumstantial evidence of how the highly divergent primary sequences of IF proteins lead to the formation of seemingly similar polymers and how this correlates with their function in individual cells and tissues. Point mutations in IF proteins, particularly in lamins, have been demonstrated to lead to severe, inheritable multi-systemic diseases, thus underlining their importance at several functional levels. Recent structural work has now begun to shed some light onto the complex fine tuning of structure and function in these fibrous, coiled coil forming multidomain proteins and their contribution to cellular physiology and gene regulation.

Amino Acid Sequence↗
PubMed2003

Cryo-electron tomography provides novel insights into nuclear pore architecture: implications for nucleocytoplasmic transport.

To go beyond the current structural consensus model of the nuclear pore complex (NPC), we performed cryo-electron tomography of fully native NPCs from Xenopus oocyte nuclear envelopes (NEs). The cytoplasmic face of the NPC revealed distinct anchoring sites for the cytoplasmic filaments, whereas the nuclear face was topped with a massive distal ring positioned above the central pore with indications of the anchoring sites for the nuclear basket filaments and putative intranuclear filaments. The rather "spongy" central framework of the NPC was perforated by an elaborate channel and void system, and at the membrane pore interface it exhibited distinct "handles" protruding into the lumen of the NE. The most variable structural moiety of the NPC was a rather tenuous central plug partially obstructing the central pore. Its mobile character was documented by time-lapse atomic force microscopy. Taken together, the new insights we gained into NPC structure support the notion that the NPC acts as a constrained diffusion pore for molecules and particles without retention signal and as an affinity gate for signal-bearing cargoes.

Active Transport, Cell Nucleus↗
PubMed2003

Full-length rat amylin forms fibrils following substitution of single residues from human amylin.

Pancreatic amyloid deposits, composed of the 37 amino acid residue peptide amylin, represent an integral part of type 2 diabetes mellitus pathology. Human amylin (hA) forms fibrils in vitro and is toxic to cultured pancreatic islet beta-cells. In contrast, rat amylin (rA) which differs from hA by only six amino acid residues in the central region of the peptide, residues 18-29, does not form fibrils and is not cytotoxic. To elucidate the role of individual residues in fibril formation, we have generated a series of full-length rA variants and examined their ability to form fibrils in vitro. Single-residue substitutions with amino acids from corresponding positions of the hA sequence, i.e. R18H, L23F, or V26I, were sufficient to render rA competent for fibril formation albeit at a small yield. Combining two or three of these substitutions generally increased the ability to produce fibrils. Variant rA fibril morphologies were examined by negative stain electron microscopy and found to be similar to those generated by hA itself. Bulk assays, i.e. involving thioflavin-T fluorescence and sedimentation, showed that the amount of fibril formation was relatively small for these rA variants when compared to hA under the same conditions. Fibril growth was demonstrated by time-lapse atomic force microscopy, and MALDI-TOF mass spectrometry was used to verify that fibrils consisted of full-length peptide. Our observations confirm previous reports that the three proline residues play a dominant negative role in fibril formation. However, their presence is not sufficient to completely abolish the ability of rA to form fibrils, as each of the other three implicated residues (i.e. R18, L23 and V26) also has a dominant modulating effect.

Amino Acid Sequence↗