Biomedical subjects

Tomohiro Hiraishi

Publications and source records attributed to Tomohiro Hiraishi.

15 recordsLinked to original sources

PubMed2006

Effects of mutations in the substrate-binding domain of poly[(R)-3-hydroxybutyrate] (PHB) depolymerase from Ralstonia pickettii T1 on PHB degradation.

Poly[(R)-3-hydroxybutyrate] (PHB) depolymerase from Ralstonia pickettii T1 (PhaZ(RpiT1)) adsorbs to denatured PHB (dPHB) via its substrate-binding domain (SBD) to enhance dPHB degradation. To evaluate the amino acid residues participating in dPHB adsorption, PhaZ(RpiT1) was subjected to a high-throughput screening system consisting of PCR-mediated random mutagenesis targeted to the SBD gene and a plate assay to estimate the effects of mutations in the SBD on dPHB degradation by PhaZ(RpiT1). Genetic analysis of the isolated mutants with lowered activity showed that Ser, Tyr, Val, Ala, and Leu residues in the SBD were replaced by other residues at high frequency. Some of the mutant enzymes, which contained the residues replaced at high frequency, were applied to assays of dPHB degradation and adsorption, revealing that those residues are essential for full activity of both dPHB degradation and adsorption. These results suggested that PhaZ(RpiT1) adsorbs on the surface of dPHB not only via hydrogen bonds between hydroxyl groups of Ser in the enzyme and carbonyl groups in the PHB polymer but also via hydrophobic interaction between hydrophobic residues in the enzyme and methyl groups in the PHB polymer. The L441H enzyme, which displayed lower dPHB degradation and adsorption abilities, was purified and applied to a dPHB degradation assay to compare it with the wild-type enzyme. The kinetic analysis of the dPHB degradation suggested that lowering the affinity of the SBD towards dPHB causes a decrease in the dPHB degradation rate without the loss of its hydrolytic activity for the polymer chain.

Amino Acid Sequence↗

PubMed2005

Interaction between poly[(R)-3-hydroxybutyrate] depolymerase and biodegradable polyesters evaluated by atomic force microscopy.

Adsorption of PHB depolymerase from Ralstonia pickettii T1 to biodegradable polyesters such as poly[(R)-3-hydroxybutyrate] (PHB) and poly(l-lactic acid) (PLLA) was investigated by atomic force microscopy (AFM). The substrate-binding domain (SBD) with histidines within the N-terminus was prepared and immobilized on the AFM tip surface via a self-assembled monolayer with a nitrilotriacetic acid group. Using the functionalized AFM tips, the force-distance measurements for polyesters were carried out at room temperature in a buffer solution. In the case of AFM tips with immobilized SBD and their interaction with polyesters, multiple pull-off events were frequently recognized in the retraction curves. The single rupture force was estimated at approximately 100 pN for both PLLA and PHB. The multiple pull-off events were recognized even in the presence of a surfactant, which will prevent nonspecific interactions, but reduced when using polyethylene instead of polyesters as a substrate. The present results provide that the PHB depolymerase adsorbs specifically to the surfaces of polyesters and that the single unbinding event evaluated here is mainly associated with the interaction between one molecule of SBD and the polymer surface.

Journal Article↗

PubMed2005

Organization of polyhydroxyalkanoate synthase for in vitro polymerization as revealed by atomic force microscopy.

Individual polyhydroxyalkanoate synthase molecules from Ralstonia eutropha (PhaCRe) were directly visualized on highly oriented pyrolytic graphite (HOPG) by atomic force microscopy (AFM). PhaCRe molecule was observed as a spherical particle of 2.9 +/- 0.4 nm in height and 28 +/- 4 nm in width. In vitro polymerization reaction on HOPG was carried out for 5 min by reacting the PhaCRe molecules with (R)-3-hydroxybutyryl-CoA monomers. The reaction product was then observed after the removal of water solution. Several PhaCRe molecules associated with each other to form an assembly, which was attached to a fibrillar structure of ca. 0.2-0.3 nm in height. The fibrillar structure that elongated from the PhaCRe assembly was interpreted as the poly[(R)-3-hydroxybutyrate] polymer chain. High resolution AFM suggested that the PhaCRe assembly was composed of 3-4 subunits of PhaCRe molecules. This was further supported by SDS-PAGE analysis of the cross-linked PhaCRe enzyme. These results suggest that more than two subunits of PhaCRe are necessary for the in vitro polymerization of PHB molecular chains.

Acyltransferases↗

PubMed2005

Characterization and properties of G4X mutants of Ralstonia eutropha PHA synthase for poly(3-hydroxybutyrate) biosynthesis in Escherichia coli.

Modification of the type I polyhydroxyalkanoate synthase of Ralstonia eutropha (PhaC(Re)) was performed through systematic in vitro evolution in order to obtain improved PhaC(Re) having an enhanced activity of poly(3-hydroxybutyrate) (PHB) synthesis in recombinant Escherichia coli. For the first time, a beneficial G4D N-terminal mutation important for the enhancement of both PHB content in dry cells and PhaC(Re) level in vivo was identified. Site-directed saturation mutagenesis at the G4 position enabled us to identify other mutations conferring similar enhanced characteristics. In addition, the PHB homopolymer synthesized by most G4X single mutants also had higher molecular weights than that of the wild-type. In vitro enzymatic assays of purified G4D mutant PhaC(Re) revealed that the mutant enzyme exhibited slightly lower activity and reaction efficiency compared to the wild-type enzyme. [diagram in text].

Acyltransferases↗

PubMed2005

Site-directed saturation mutagenesis at residue F420 and recombination with another beneficial mutation of Ralstonia eutropha polyhydroxyalkanoate synthase.

The F420S substitution enhances the specific activity of Ralstonia eutropha PHA synthase (PhaCRe). We have now carried out site-directed saturation mutagenesis of F420 of PhaCRe and, amongst the F420 mutants, the F420S mutant gave the highest poly(3-hydroxybutyrate) (PHB) content. In vitro activity assay showed that the F420S enzyme had a significant decrease in its lag phase compared to that of the wild-type enzyme. Enhancement of PHB accumulation was achieved by combination of the F420S mutation with a G4D mutation, which conferred high PHB content and high in vivo concentration of PhaCRe enzyme. The G4D/F420S mutant gave a higher PHB content and in vivo concentration of PhaCRe enzyme than the F420S mutant, while the molecular weight of the PHB polymer of the double mutant was similar to that of the F420S mutant.

Acyltransferases↗

PubMed2004

Mutation effects of a conserved alanine (Ala510) in type I polyhydroxyalkanoate synthase from Ralstonia eutropha on polyester biosynthesis.

Type I polyhydroxyalkanoate (PHA) synthases, as represented by Ralstonia eutropha enzyme (PhaC(Re)), have narrow substrate specificity toward (R)-3-hydroxyacyl-coenzyme A with acyl chain length of C3-C5 to yield PHA polyesters. In this study, saturation point mutagenesis of a highly conserved alanine at position 510 (A510) in PhaC(Re) was carried out to investigate the effects on the polymerization activity and the substrate specificity for in vivo PHA biosynthesis in bacterial cells. A series of saturation mutants were first applied for poly[(R)-3-hydroxybutyrate] homopolymer synthesis in Escherichia coli and R. eutropha PHB(-)4 (PHA negative mutant) cells to assess the polymerization activity. All mutants showed quantitatively similar polymerization activities when R. eutropha PHB(-)4 was used for assay, whereas several mutants such as A510P showed low activities in E. coli. Further analysis has revealed that majority of mutants synthesize polyesters with higher molecular weights than the wild-type. In particular, substitution by acidic amino acids, A510D(E), led to remarkable increases in molecular weights. Subsequently, PHA copolymer synthesis from dodecanoate (C12 fatty acid) was examined. The copolymer compositions were varied depending on the mutants used. Significant increased fractions of long monomer units (C6 and C8) in PHA copolymers were observed for three mutants [A510M(Q,C)]. From these results, the mutations at this potion are beneficial to change the molecular weight of polyesters and the substrate specificity of PhaC(Re). Molecular weight distributions of PHA polymers synthesized by the wild-type enzyme (PhaC(Re)) and its mutants.

Acyltransferases↗

PubMed2004

Biosynthesis and compositional regulation of poly[(3-hydroxybutyrate)-co-(3-hydroxyhexanoate)] in recombinant ralstonia eutropha expressing mutated polyhydroxyalkanoate synthase genes.

A new strategy for bacterial polyhydroxyalkanoate (PHA) production by recombinant Ralstonia eutropha PHB(-)4 harboring mutated PHA synthase genes (phaC(Ac)) from Aeromona caviae was investigated. The strain harboring wild-type phaC(Ac) gene produced a PHA copolymer consisting of (R)-3-hydroxybutyrate and (R)-3-hydroxyhexanoate [P(3HB-co-3HHx)] with 3.5 mol-% of 3HHx fraction from soybean oil. When the mutants of phaC(Ac) gene were applied to this production system, 3HHx fraction in copolymers was varied in the range of 0-5.1 mol-%. Thus, the regulation of PHA copolymer compositions has been achieved by the use of mutated PHA synthase genes.

3-Hydroxybutyric Acid↗

PubMed2004

Enzymatic hydrolysis of alpha- and beta-oligo(L-aspartic acid)s by poly(aspartic acid) hydrolases-1 and 2 from Sphingomonas sp. KT-1.

The enzymatic hydrolysis of alpha- and beta-oligo(L-aspartic acid)s by PAA hydrolase-1 and PAA hydrolase-2 (purified from Sphingomonas sp. KT-1) was performed to elucidate the mechanism of the microbial degradation by Sphingomonas sp. KT-1 of the thermally synthesized alpha,beta-poly(D,L-aspartic acid) (tPAA). GPC analysis of the hydrolyzed products of alpha- and beta-tetra(L-aspartic acid)s by PAA hydrolase-1 has showed that PAA hydrolase-1 is capable of hydrolyzing only the specific amide bonds between beta-aspartic acid units. The RP-HPLC analysis of the enzymatic hydrolysis of beta-oligo(L-aspartic acid)s (4 and 5 mers) by PAA hydrolase-1 has suggested that the enzymatic hydrolysis of beta-oligo(L-aspartic acid)s occurs via an endo-mode cleavage. In contrast, PAA hydrolase-2 hydrolyzed both alpha- and beta-oligo(L-aspartic acid)s via an exo-mode cleavage to yield L-aspartic acid as a final product. A kinetic study on the enzymatic hydrolysis of alpha-oligo(L-aspartic acid)s (3 to 7 mers) by PAA hydrolase-2 has indicated that Km values are almost independent of the number of monomer units in oligomers of 4 to 7 mers, while that Vmax values are markedly dependent on the chain length and show a maximum value at 5 mer.

Aspartic Acid↗

PubMed2002

In vitro evolution of a polyhydroxybutyrate synthase by intragenic suppression-type mutagenesis.

In vitro evolution was applied to obtain highly active mutants of Ralstonia eutropha polyester synthase (PhbC(Re)), which is a key enzyme catalyzing the formation of polyhydroxybutyrate (PHB) from (R)-3-hydroxybutyryl-CoA (3HB-CoA). To search for beneficial mutations for activity improvement of this enzyme, we have conducted multi-step mutations, including activity loss and intragenic suppression-type activity reversion. Among 259 revertants, triple mutant E11S12 was obtained as the most active one via PCR-mediated secondary mutagenesis from mutant E11 with a single mutation (Ser to Pro at position 80), which exhibited reduced activity (as low as 27% of the wild-type level) but higher thermostability compared to the wild-type enzyme. Mutant E11S12 exhibited up to 79% of the wild-type enzyme activity. Mutation separation of E11S12 revealed that the replacement of Phe by Ser at position 420 (F420S), located in a highly conserved alpha/beta hydrolase fold region, of the E11S12 mutant contributes to the improvement of the enzyme activity. A purified sample of the genetically engineered mutant, termed E11S12-1, with the F420S mutation alone was found to exhibit a 2.4-fold increase in specific activity toward 3HB-CoA, compared to the wild-type.

Acyltransferases↗

PubMedDate not supplied

Genetic analysis and characterization of poly(aspartic acid) hydrolase-1 from Sphingomonas sp. KT-1.

Sphingomonas sp. KT-1 hydrolyzes poly(aspartic acid) (PAA) containing alpha- and beta-amide units and has at least two different types of PAA hydrolases. The PAA hydrolase-1 hydrolyzes selectively beta-beta amide units in PAA. Molecular cloning of PAA hydrolase-1 from Sphingomonas sp. KT-1 has been carried out to characterize its gene products. Genetic analysis shows that the deduced amino acid sequence of PAA hydrolase-1 has a similarity with those of the catalytic domain of poly(3-hydroxybutyric acid) (PHB) depolymerases from Alcaligenes faecalis AE122 and Pseudomonas lemoignei. Site-specific mutation analysis indicates that (176)Ser is a part of a strictly conserved pentapeptide sequence (Gly-Xaa-Ser-Xaa-Gly), which is the lipase box, and plays as an active residue.

Amino Acid Sequence↗

PubMedDate not supplied

Biochemical and molecular characterization of poly(aspartic acid) hydrolase-2 from sphingomonas sp. KT-1.

Poly(aspartic acid) (PAA) hydrolase-2 was purified from crude soluble cellular extracts of Sphingomonas sp. KT-1 (JCM10459) and characterized to elucidate the mechanism of alpha,beta-poly(d,l-aspartic acid) (tPAA) biodegradation. The molecular mass of PAA hydrolase-2 was 42 kDa, and the isoelectric point was 9.6. The optimum values of pH and temperature for the hydrolysis of alpha-di(l-aspartic acid) by PAA hydrolase-2 were 7.0 and 55 degrees C, respectively. The effect of inhibitors on the hydrolysis of alpha-di(l-aspartic acid) showed that the activity of PAA hydrolase-2 was significantly inhibited by EDTA. Thermally synthesized tPAA was hydrolyzed in the presence of two enzymes, PAA hydrolase-1 and PAA hydrolase-2, to generate aspartic acid. The PAA hydrolase-2 was capable of hydrolyzing alpha-poly(l-aspartic acid) of high molecular weights but had limited activity for tPAA. These results lead us to propose the following mechanism. First, PAA hydrolase-1 hydrolyzes tPAA to yield oligo(aspartic acid) via an endo-mode cleavage, and subsequently, PAA hydrolase-2 hydrolyzes the resultant oligo(aspartic acid) to yield aspartic acid. Analysis of hydrolyzed products from alpha- and beta-penta(l-aspartic acid) revealed that PAA hydrolase-2 catalyzed the exo-mode hydrolysis of alpha- and beta-penta (l-aspartic acid). The gene encoding PAA hydrolase-2 from Sphingomonas sp. KT-1 was cloned, and genetic analysis showed that the deduced amino acid sequence of PAA hydrolase-2 is similar to a putative peptidase, which belongs to the M20/M25/M40 family of proteins, from Caulobacter crescentus CB15.

Amino Acid Sequence↗

PubMedDate not supplied

Direct observation of poly(3-hydroxybutyrate) depolymerase adsorbed on polyester thin film by atomic force microscopy.

Poly[(R)-3-hydroxybutyrate] (PHB) depolymerases adsorbed on poly(L-lactide) (PLLA) thin film were directly observed by atomic force microscopy (AFM). A PLLA thin film of 100 nm thickness was prepared on a silicon wafer by spin-cast method. The PLLA thin film was treated at 220 degrees C and quenched to room temperature, resulting in the formation of a completely amorphous film with a smooth surface. Then, the PHB depolymerases from Pseudomonas stutzeri YM1006 and Ralstonia pickettii T1 were dispersed on the amorphous PLLA thin film. Direct AFM observation has revealed that the PHB depolymerases bind in an elliptic shape on the surface of the PLLA thin film and that a small ridge is created around each enzyme molecule. After removal of the enzymes with 40% ethanol aqueous solution, small hollows were found on the PLLA thin film. These results suggest that a PHB depolymerase interacts with polyester molecules during their adsorption to make a hollow on the substrate surface.

Adsorption↗

PubMedDate not supplied

Morphology and enzymatic degradation of oriented thin film of ultrahigh molecular weight poly[(R)-3-hydroxybutyrate].

Thin films of ultrahigh molecular weight poly[(R)-3-hydroxybutyrate] (P(3HB)) were sheared and isothermally crystallized at 100 degrees C. Transmission electron microscopy and atomic force microscopy (AFM) observations revealed that thick fibrous textures, on which lamellae are overgrown normal to the long axis of the fibril, run parallel to the shearing direction. A selected area electron diffraction pattern taken from the fibrils exhibits a fiber pattern of P(3HB) alpha-modification, and the crystallographic c-axis (chain axis) of P(3HB) is set parallel to the long axis of the fibril. In situ AFM observations of enzymatic degradation for the thin film were performed with an extracellular P(3HB) depolymerase from Ralstonia pickettii T1 in a buffer solution. The film surface and thickness became rougher and thinner, respectively, with time after adding the enzyme. During the degradation, fine shish-kebab structures appeared gradually. This fact supports that the amorphous region in the film is preferentially degraded rather than the crystalline one by the depolymerase. The in situ AFM observations also revealed that one thick fibril in the original film is composed of three different states, namely, finer fibril (shish), stacked lamellae (kebab) in edge-on state, and the surrounding amorphous phase.

Hydroxybutyrates↗

PubMedDate not supplied

Atomic force microscopic observation of in vitro polymerized poly[(R)-3-hydroxybutyrate]: insight into possible mechanism of granule formation.

Atomic force microscopy (AFM) was used to study the formation and growth of poly[(R)-3-hydroxybutyrate] (PHB) structures formed in the enzymatic polymerization of (R)-3-hydroxybutyryl coenzyme A [(R)-3-HBCoA] in vitro. Poly(3-hydroxyalkanoate) (PHA) synthase (PhaC(Re)) from Ralstonia eutropha, a class I synthase, was purified by one-step purification and then used for in vitro reactions. Before the reaction, PhaC(Re) molecules were deposited on highly oriented pyrolytic graphite (HOPG) and observed as spherical particles with an average height of 2.7 +/- 0.6 nm and apparent width of 24 +/- 3 nm. AFM analysis during the initial stage of the reaction, that is, after a small amount of (R)-3-HBCoA had been consumed, showed that the enzyme molecules polymerize (R)-3-HBCoA and form flexible 3HB polymer chains that extend from the enzyme particles, resulting in the formation of an enzyme-nascent PHB conjugate. When a sufficient amount of (R)-3-HBCoA was used as substrate, the reaction rapidly increased after the first minute followed by a slow increase in rate, and substrate was completely consumed after 4 min. After 4 min, spherical granules continued to grow in size to form clusters over 10 um in width, and in later stages of cluster formation, the cluster developed small projections with a size of approximately 100-250 nm, suggesting qualitative changes of the PHB clusters. Moreover, the high-resolution AFM images suggested that globular structures of approximately 20-30 nm apparent width, which corresponds to the size of PhaC(Re), were located on the surface of the small PHB granule particles.

Acyltransferases↗

PubMedDate not supplied

Dynamic adsorption behavior of poly(3-hydroxybutyrate) depolymerase onto polyester surface investigated by QCM and AFM.

Time-dependent adsorption behavior of poly(3-hydroxybutyrate) (PHB) depolymerase from Ralstonia pickettiiT1 on a polyester surface was studied by complementary techniques of quarts crystal microbalance (QCM) and atomic force microscopy (AFM). Amorphous poly(l-lactide) (PLLA) thin films were used as adsorption substrates. Effects of enzyme concentration on adsorption onto the PLLA surface were determined time-dependently by QCM. Adsorption of PHB depolymerase took place immediately after replacement of the buffer solutions with the enzyme solutions in the cell, followed by a gradual increase in the amount over 30 min. The amount of PHB depolymerase molecules adsorbed on the surface of amorphous PLLA thin films increased with an increase in the enzyme concentration. Time-dependent AFM observation of enzyme molecules was performed during the adsorption of PHB depolymerase. The phase response of the AFM signal revealed that the nature of the PLLA surface around the PHB depolymerase molecule was changed due to the adsorption function of the enzyme and that PHB depolymerase adsorbed onto the PLLA surface as a monolayer at a lower enzyme concentration. The number of PHB depolymerase molecules on the PLLA surface depended on the enzyme concentration and adsorption time. In addition, the height of the adsorbed enzyme was found to increase with time when the PLLA surface was crowded with the enzymes. In the case of higher enzyme concentrations, multilayered PHB depolymerases were observed on the PLLA thin film. These QCM and AFM results indicate that two-step adsorption of PHB depolymerase occurs on the amorphous PLLA thin film. First, adsorption of PHB depolymerase molecules takes place through the characteristic interaction between the binding domain of PHB depolymerase and the free surface of an amorphous PLLA thin film. As the adsorption proceeded, the surface region of the thin film was almost covered with the enzyme, which was accompanied by morphological changes. Second, the hydrophobic interactions among the enzymes in the adlayer and the solution become more dominant to stack as a second layer.

Adsorption↗