Biomedical subjects

Todd W Murray

Publications and source records attributed to Todd W Murray.

5 recordsLinked to original sources

PubMed2005

Imaging in diffuse media with pulsed-ultrasound-modulated light and the photorefractive effect.

Acousto-optic imaging in diffuse media is a dual wave-sensing technique in which an acoustic field interacts with multiply scattered laser light. The acoustic field causes a phase modulation in the optical field emanating from the interaction region, and this phase-modulated optical field carries with it information about the local optomechanical properties of the media. We report on the use of a pulsed ultrasound transducer to modulate the optical field and the use of a photorefractive-crystal-based interferometry system to detect ultrasound-modulated light. The use of short pulses of focused ultrasound allows for a one-dimensional acousto-optic image to be obtained along the transducer axis from a single, time-averaged acousto-optic signal. The axial and lateral resolutions of the system are controlled by the spatial pulse length and width of the ultrasound beam, respectively. In addition, scanning the ultrasound transducer in one dimension yields two-dimensional images of optical inhomogeneities buried in turbid media.

Diffusion↗

PubMed2005

Computations of the acoustically induced phase shifts of optical paths in acoustophotonic imaging with photorefractive-based detection.

Acoustophotonic imaging uses ultrasound-modulated scattered light to improve the quality of optical imaging in diffusive media. Experiments that use photorefractive-crystal-based detection have shown that there is a large dc shift in the acoustically modulated or ac optical signal, which could be utilized to further improve optical imaging resolution. We report that photon paths in a diffusive medium were generated by a Monte Carlo simulation, and the optical phase shifts of the various photons induced by the presence of a realistic focused ultrasound beam were calculated. Quantities that characterize the ac and dc signal components were evaluated by use of the calculated phase shifts. It was confirmed that the dc component dominates owing to coherent summation of the contributions from all the photons.

Acoustics↗

PubMed2005

Fusion of conventional ultrasound imaging and acousto-optic sensing by use of a standard pulsed-ultrasound scanner.

Acousto-optic sensing (AOS) is a dual-wave sensing technique based on the ultrasound modulation of diffuse light in a turbid medium. We experimentally demonstrate the feasibility of combining AOS and conventional ultrasound imaging by use of a commercially available pulsed-ultrasound scanner coupled with a photorefractive crystal-based optical interferometry system. Optically absorbing targets embedded in highly diffusive phantoms (mus'= 10 cm(-1)) are imaged through a thickness of 27 mm with millimeter resolution. The acousto-optic images are intrinsically coregistered with the ultrasound images.

Acoustics↗

PubMed2004

Detection of ultrasound-modulated photons in diffuse media using the photorefractive effect.

Ultrasound-modulated optical tomography is a dual-wave sensing technique in which diffusive light in a turbid medium interacts with an imposed acoustic field. A phase-modulated photon field emanates from the interaction region and carries with it information about the optomechanical properties of the medium. We present a technique for detection of ultrasound-induced optical phase modulation using an adaptive, photorefractive-crystal-based interferometry system. Experimental results are presented demonstrating detection of ultrasound-modulated signals in highly scattering media by use of pulsed ultrasound insonation.

Image Enhancement↗

PubMed2002

Intrinsic fiber-optic ultrasonic sensor array using multiplexed two-wave mixing interferometry.

An intrinsic multiplexed laser interferometer is presented that allows for the simultaneous detection of acoustic waves by an array of fiber-optic sensors. The phase-modulated signals from each sensor are demodulated by use of an adaptive two-wave mixing setup. The light from each sensing fiber in the array is mixed with a reference beam in a single photorefractive crystal (PRC), and the output beams from the PRC are imaged onto separate photodetectors to create a multiplexed two-wave mixing (MTWM) system. The sensing fibers are embedded in graphite-epoxy composite panels, and detection of both acoustic emission and ultrasonic signals in these materials is demonstrated. The intrinsic MTWM system is an effective tool for the simultaneous demodulation of signals from a large fiber sensor array. Also, the adaptive nature of the MTWM setup obviates the need for active stabilization against ambient noise.

Journal Article↗