Search PubMed⌕ Search

Biomedical subjects

Tobin J Marks

Publications and source records attributed to Tobin J Marks.

At least 55 records · Page 3Linked to original sources
PubMed2005

Toward the ideal organic light-emitting diode. The versatility and utility of interfacial tailoring by cross-linked siloxane interlayers.

Small molecule and polymer organic light-emitting diodes (OLEDs) show promise of revolutionizing display technologies. Hence, these devices and the materials that render them functional are the focus of intense scientific and technological interest. The archetypical multilayer OLED heterostructure introduces numerous chemical and physical challenges to the development of efficient and robust devices. It is demonstrated here that robust, pinhole-free, conformal, adherent films with covalently interlinked structures are readily formed via self-assembling or spin-coating organosilane-functionalized molecular precursors at the anode-hole transport layer interface. In this manner, molecularly "engineered" hole transport and hydrocarbon anode functionalization layers can be introduced with thicknesses tunable from the angstrom to nanometer scale. These investigations unequivocally show that charge injection and continuity at the anode-hole transport layer interface, hence OLED durability and efficiency, can be substantially enhanced by these tailored layers.

Biomedical Engineering↗
PubMed2005

Low operating voltage single ZnO nanowire field-effect transistors enabled by self-assembled organic gate nanodielectrics.

The development of nanowire transistors enabled by appropriate dielectrics is of great interest for flexible electronic and display applications. In this study, nanowire field-effect transistors (NW-FETs) composed of individual ZnO nanowires are fabricated using a self-assembled superlattice (SAS) as the gate insulator. The 15-nm SAS film used in this study consists of four interlinked layer-by-layer self-assembled organic monolayers and exhibits excellent insulating properties with a large specific capacitance, 180 nF/cm2, and a low leakage current density, 1 x 10(-8) A/cm2. SAS-based ZnO NW-FETs display excellent drain current saturation at Vds = 0.5 V, a threshold voltage (Vth) of -0.4 V, a channel mobility of approximately 196 cm2/V s, an on-off current ratio of approximately 10(4), and a subthreshold slope of 400 mV/dec. For comparison, ZnO NW-FETs are also fabricated using 70-nm SiO2 as the gate insulator. Implementation of the SAS gate dielectric reduces the NW-FET operating voltage dramatically with more than 1 order of magnitude enhancement of the on-current. These results strongly indicate that SAS-based ZnO NW-FETs are promising candidates for future flexible display and logic technologies.

Journal Article↗
PubMed2004

Self-assembled electrooptic thin films with remarkably blue-shifted optical absorption based on an X-shaped chromophore.

An "X-shaped" two-dimensional electrooptic (EO) chromophore with extended orthogonal conjugation was designed and synthesized. Self-assembled thin films of this chromophore were fabricated via layer-by-layer chemisorptive siloxane-based self-assembly. The films exhibit a dramatically blue-shifted optical maximum (325 nm) while maintaining a large EO response (chi33(2) approximately 232 pm/V at 1064 nm; r33 approximately 43 pm/V at 1550 nm).

Journal Article↗
PubMed2004

Very large electro-optic responses in H-bonded heteroaromatic films grown by physical vapour deposition.

A crucial goal for modern telecommunications systems is development of very high-speed components for broadband (>100 GHz), all-optical signal/information processing. The core component of such technologies is the electro-optic modulator, which encodes electrical signals onto fibre-optic transmissions. A significant challenge therefore is obtaining materials that have large electro-optic responses and that can be readily fabricated into devices at low cost. We report here on the realization of high-response heteroaromatic organic chromophores that can be straightforwardly self-organized from the vapour phase into intrinsically acentric, high-quality, micrometre-scale films. These pi-conjugated electro-optically active films (with second-order susceptibilities up to approximately 100 pm V(-1)) are thermally stable and conveniently grown by a simple physical vapour deposition process in a few hours. Supramolecular acentricity is achieved without electric field poling, enforced by biomimetic heterocycle-hydroxycarbonyl head-to-tail hydrogen-bonding.

Crystallization↗
PubMed2004

Dopant ion size and electronic structure effects on transparent conducting oxides. Sc-doped CdO thin films grown by MOCVD.

A series of Sc-doped CdO (CSO) thin films have been grown on both amorphous glass and single-crystal MgO(100) substrates at 400 degrees C by MOCVD. Both the experimental data and theoretical calculations indicate that Sc3+ doping shrinks the CdO lattice parameters due to its relatively small six-coordinate ionic radius, 0.89 angstroms, vs 1.09 angstroms for Cd2+. Conductivities as high as 18100 S/cm are achieved for CSO films grown on MgO(100) at a Sc doping level of 1.8 atom %. The CSO thin films exhibit an average transmittance >80% in the visible range. Sc3+ doping widens the optical band gap from 2.7 to 3.4 eV via a Burstein-Moss energy level shift, in agreement with the results of band structure calculations within the sX-LDA (screened-exchange local density approximation) formalism. Epitaxial CSO films on single-crystal MgO(100) exhibit significantly higher mobilities (up to 217 cm2/(V x s)) and carrier concentrations than films on glass, arguing that the epitaxial CSO films possess fewer scattering centers and higher doping efficiencies due to the highly textured microstructure. Finally, the band structure calculations provide a microscopic explanation for the observed dopant size effects on the structural, electronic, and optical properties of CSO.

Journal Article↗
PubMed2004

Building blocks for n-type molecular and polymeric electronics. Perfluoroalkyl- versus alkyl-functionalized oligothiophenes (nT; n = 2-6). Systematics of thin film microstructure, semiconductor performance, and modeling of majority charge injection in field-effect transistors.

The solid-state properties and FET electrical behavior of several series of alpha,omega- and beta,beta'-fluorocarbon- and alkyl-substituted and unsubstituted oligothiophenes nTs (n = 2-6) are compared and contrasted. The thin films were grown by slow vacuum deposition over a range of substrate temperatures and/or by casting from solution and were investigated by X-ray diffraction and scanning electron microscopy. Our results indicate that vacuum deposition at 60-80 degrees C affords films with remarkably similar microstructures despite the extensive H --> F substitution. Trends in observed d spacing versus molecular core extension provide quantitative information on molecular orientation. Field-effect transistor measurements performed for all systems and having the same device structure, components, and fabrication conditions demonstrate that all nTs functionalized with fluorocarbon chains at the thiophene termini are n-type semiconductors, in contrast to the p-type activity of the remaining systems. One of these systems, alpha,omega-diperfluorohexyl-4T, exhibits a mobility of 0.22 cm2/(V s) and an Ion:Ioff ratio of 10(6), one of the highest so far reported for an n-type organic semiconductor. The effect of substitution regiochemistry on FET majority charge carrier was additionally studied, in the case of a 6T core, by shifting the fluorocarbon substituents from the terminal to the central thiophene units. Finally, we propose a simple theoretical model for electrode/organic interfacial carrier injection. The results suggest why modest substituent-induced changes in the injection barrier can produce working n-type materials.

Journal Article↗
PubMed2004

Zirconium hydrocarbyl chemisorption on sulfated metal oxides: new supports, chemisorption pathways, and implications for catalysis.

The sulfated metal oxides (SMOs) sulfated stannia (SnS), sulfated iron oxide (FeS), and sulfated titanium dioxide (TiS) have been synthesized and examined as support materials/cocatalysts/activators for molecule-based olefin polymerization and hydrogenation catalysis. (13)C CPMAS NMR spectroscopic analysis of Cp(2)Zr((13)CH(3))(2)/SMO chemisorption shows that cationic zirconocenium species are formed along with varying amounts of catalytically inactive micro-oxo (Cp(2)Zr(CH(3))O-surface) species, depending on the support material. Ethylene polymerization data with the supported catalysts show that polymerization activity is dependent on both precursor ligation [Zr(CH(2)Ph)(4) > (Me(5)Cp)ZrMe(3)] and the nature of the support (SnS > FeS > TiS). Poisoning studies were performed in conjunction with ethylene polymerization, mediated by (Me(5)Cp)ZrMe(3) supported on each SMO, and reveal that, for (Me(5)Cp)ZrMe(3)/SnS, 61 +/- 5% of the Zr sites are catalytically significant, while, for (Me(5)Cp)ZrMe(3)/FeS, this quantity is 22 +/- 2%, and for (Me(5)Cp)ZrMe(3)/TiS, 63 +/- 9%. These catalysts are also active for benzene hydrogenation and are separable from liquid-phase products using physical or, in the case of FeS, magnetic techniques.

Letter↗
PubMed2004

Building blocks for N-type molecular and polymeric electronics. Perfluoroalkyl- versus alkyl-functionalized oligothiophenes (nTs; n = 2-6). Systematic synthesis, spectroscopy, electrochemistry, and solid-state organization.

The synthesis, comparative physicochemical properties, and solid-state structures of five oligothiophene (nT) series differing in substituent nature and attachment, regiochemistry, and oligothiophene core length (n) are described. These five series include the following 25 compounds: (i) alpha,omega-diperfluorohexyl-nTs 1 (DFH-nTs, n = 2-6), (ii) beta,beta'-diperfluorohexyl-nTs 2 (isoDFH-nTs, n = 2-6), (iii) alpha,omega-dihexyl-nTs 3 (DH-nTs, n = 2-6), (iv) beta,beta'-dihexyl-nTs 4 (isoDH-nTs, n = 2-6), and (v) unsubstituted oligothiophenes 5 (alphanTs, n = 2-6). All new compounds were characterized by elemental analysis, mass spectrometry, and multinuclear NMR spectroscopy. To probe and address quantitatively how the chemistry and regiochemistry of conjugated core substitution affects molecular and solid-state properties, the entire 1-5 series was investigated by differential scanning calorimetry, thermogravimetric analysis, and optical absorption and emission spectroscopies. Single-crystal X-ray diffraction data for several fluorocarbon-substituted oligomers are also presented and compared. The combined analysis of these data indicates that fluorocarbon-substituted nT molecules strongly interact in the condensed state, with unit cell level phase separation between the aromatic core and fluorocarbon chains. Surprisingly, despite these strong intermolecular interactions, high solid-state fluorescence efficiencies are exhibited by the fluorinated derivatives. Insight into the solution molecular geometries and conformational behavior are obtained from analysis of optical and variable-temperature NMR spectra. Finally, cyclic voltammetry data offer a reliable picture of frontier MO energies, which, in combination with DFT computations, provide key information on relationships between oligothiophene substituent effects and electronic response properties.

Journal Article↗
PubMed2004

Organolanthanide-catalyzed synthesis of phosphine-terminated polyethylenes.

Organolanthanide-mediated hydrophosphination and ethylene polymerization are coupled in a catalytic cycle to produce diphenylphosphine-terminated polyethylenes. The resulting polymers were characterized by 1H, 13C, and 31P NMR, GPC, and DSC and compared spectroscopically to the model compound, 1-eicosyldiphenylphosphine oxide. High activities (107 g polymer/(mol Ln.atm ethylene.h)) and narrow polydispersities were observed in the polymerization/chain transfer process. Polyethylene molecular weights were found to be inversely proportional to diphenylphosphine concentration, supporting a chain transfer mechanism. The present discovery represents the first case in which an electron-rich phosphine functions efficiently as a chain transfer agent in a single-site fn/d0-mediated olefin polymerization process.

Journal Article↗
PubMed2004

Frustrated beta-chloride elimination. Selective arene alkylation by alpha-chloronorbornene catalyzed by electrophilic metallocenium ion pairs.

Single-site polymerization catalysts generated in situ via activation of Cp*MMe(3) (Cp* = C(5)Me(5); M = Ti, Zr), (CGC)MMe(2) (CGC = C(5)Me(4)SiMe(2)NBu(t)(); M = Ti, Zr), and Cp(2)ZrMe(2) with Ph(3)C(+)B(C(6)F(5))(4)(-) catalyze alkylation of aromatic molecules (benzene, toluene) with alpha-chloronorbornene at room temperature, to regioselectively afford the 1:1 addition products exo-1-chloro-2-arylnorbornane (aryl = C(6)H(5) (1a), C(6)H(4)CH(3) (1b)) in good yields. Analogous deuterium-labeled products exo-1-chloro-2-aryl-d(n)-norbornane-7-d(1) (aryl-d(n) = C(6)D(5) (1a-d(6)), C(6)D(4)CD(3) (1b-d(8))) are obtained via catalytic arylation of alpha-chloronorbornene in either benzene-d(6) or toluene-d(8). Isolated ion-pair complexes such as (CGC)ZrMe(toluene)(+)B(C(6)F(5))(4)(-) and Cp(2)ThMe(+)B(C(6)F(5))(4)(-) also catalyze the reaction of alpha-chloronorbornene in toluene-d(8) to give 1b-d(8) in good yields, respectively. Small quantities of the corresponding bis(1-chloronorbornyl)aromatics 2 are also obtained from preparative-scale reactions. These reactions exhibit turnover frequencies exceeding 120 h(-1) (for the Cp*TiMe(3)/Ph(3)C(+)B(C(6)F(5))(4)(-)-catalyzed system), and chlorine-free products are not observed. Compounds 1 and 2 were characterized by (1)H, (2)H, (13)C, and 2D NMR, GC-MS, and elemental analysis. The aryl group exo-stereochemistry in 1a and 1b is established using (1)H-(1)H COSY, (1)H-(13)C HMBC, and (1)H-(1)H NOESY NMR, and is further corroborated by X-ray analysis of the product 1,4-bis(exo-1-chloro-2-norbornyl)benzene (2a). Control experiments and reactivity studies on each component step suggest a mechanism involving participitation of the metal electrophiles in the catalytic cycle.

Journal Article↗
PubMed2004

Transparent conducting oxides: texture and microstructure effects on charge carrier mobility in MOCVD-derived CdO thin films grown with a thermally stable, low-melting precursor.

A series of low-melting, thermally stable cadmium metal-organic chemical vapor deposition (MOCVD) precursors have been synthesized, structurally and spectroscopically characterized, and implemented in growth of highly conductive and transparent CdO thin films. One member of the series, bis(1,1,1,5,5,5-hexafluoro-2,4-pentanedionato)(N,N-diethyl-N',N'-dimethyl-ethylenediamine)cadmium(II), Cd(hfa)(2)()(N,N-DE-N',N'-DMEDA), represents a particularly significant improvement over previously available Cd precursors, owing to the low melting point and robust thermal stability. High-quality CdO films were grown by MOCVD on glass and single-crystal MgO(100) between 300 and 412 degrees C. Film growth parameters and substrate surface have large effects on microstructure and electron carrier transport properties. Enhanced mobilities observed for highly biaxially textured films grown on MgO(100) vs glass are attributed, on the basis of DC charge transport and microstructure analysis, to a reduction in neutral impurity scattering and/or to a more densely packed grain microstructure. Although single-grained films grown on MgO(100) exhibit greater mobilities than analogues with discrete approximately 100 nm grains and similar texture, this effect is attributed, on the basis of charge transport and Hall effect measurements as well as optical reflectivity analysis, to differences in carrier concentration rather than to reduced grain boundary scattering. Unprecedented conductivities and mobilities as high as 11,000 S/cm and 307 cm(2)/V.s, respectively, are obtained for epitaxial single-grained films (X-ray diffraction parameters: fwhm(omega) = 0.30 degrees, fwhm(phi) = 0.27 degrees ) grown in situ on MgO(100) at a relatively low temperature (400 degrees C).

Journal Article↗
PubMed2004

Bimetallic catalysis for styrene homopolymerization and ethylene-styrene copolymerization. Exceptional comonomer selectivity and insertion regiochemistry.

This communication reports the styrene homopolymerization behavior and ethylene-styrene copolymerization behavior of the covalently linked bimetallic constrained geometry catalyst (mu-CH2CH2-3,3'){(eta5-indenyl)[1-Me2Si(tBuN)](TiMe2)}2 (Ti2), which is the first single-site catalyst that effects not only styrene homopolymerization with high activity, but also efficient ethylene-styrene copolymerization over a broad styrene composition range (0-76% at 20 degrees C, 1.0 atm ethylene pressure). In styrene homopolymerization, a 50x increase in polymerization activity is achieved with Ti2 vs the mononuclear analogue, Ti1, using an identical trityl borate cocatalyst and polymerization conditions. In ethylene + styrene copolymerization, Ti2 enchains approximately 20% more styrene than Ti1 under identical reaction conditions. 13C NMR spectroscopy indicates that greater than two consecutive styrene units are enchained in the copolymer backbone produced by Ti2 + Ph3C+B(C6F5)4-. End group analysis of the styrene homopolymer produced by Ti2 + Ph3C+B(C6F5)4- suggests that 1,2-regiochemistry is installed in approximately 50% of the initiation steps. This unusual microstructure is believed to be related to the bimetallic catalyst structure.

Journal Article↗
PubMed2004

Marked counteranion effects on single-site olefin polymerization processes. Correlations of ion pair structure and dynamics with polymerization activity, chain transfer, and syndioselectivity.

Counteranion effects on the rate and stereochemistry of syndiotactic propylene enchainment by the archetypal C(s)-symmetric precatalyst [Me(2)C(Cp)(Flu)]ZrMe(2) (1; Cp = C(5)H(4); Flu = C(13)H(8), fluorenyl) are probed using the cocatalysts MAO (2), B(C(6)F(5))(3) (3)(,) B(2-C(6)F(5)C(6)F(4))(3) (4)(,) Ph(3)C(+)B(C(6)F(5))(4)(-) (5), and Ph(3)C(+)FAl(2-C(6)F(5)C(6)F(4))(3)(-) (6), offering greatly different structural and ion pairing characteristics. Reaction of 1 with 3 affords [Me(2)C(Cp)(Flu)]ZrMe(+) MeB(C(6)F(5))(3)(-) (7). In the case of 4, this reaction leads to formation the micro-methyl dinuclear diastereomers [([Me(2)C(Cp)(Flu)]ZrMe)(2)(micro-Me)](+) MeB(2-C(6)F(5)C(6)F(4))(3)(-) (8). A similar reaction with 6 results in diastereomeric [Me(2)C(Cp)(Flu)]ZrMe(+) FAl(2-C(6)F(5)C(6)F(4))(3)(-) (10) ion pairs. The molecular structures of 7 and 10 have been determined by single-crystal X-ray diffraction. Reorganization pathways available to these species have been examined using EXSY and dynamic NMR, revealing that the cation-MeB(C(6)F(5))(3)(-) interaction is considerably weaker/more mobile than in the FAl(2-C(6)F(5)C(6)F(4))(3)(-)-derived analogue. Polymerizations mediated by 1 in toluene over the temperature range of -10 degrees to +60 degrees C and at 1.0-5.0 atm propylene pressure (at 60 degrees C) reveal that activity, product syndiotacticity, m and mm stereodefect generation, and chain transfer processes are highly sensitive to the nature of the ion pairing. Thus, the complexes activated with 4 and 5, having the weakest ion pairing, yield the highest estimated propagation rates, while with 6, having the strongest pairing, yields the lowest. The strongly coordinating, immobile FAl(2-C(6)F(5)C(6)F(4))(3)(-) anion produces the highest/least temperature-dependent product syndiotacticity, lowest/least temperature-dependent m stereodefect abundance, and highest product molecular weight. These polypropylene microstructural parameters, and also M(w), are least sensitive to increased propylene pressure for FAl(2-C(6)F(5)C(6)F(4))(3)(-), but highest with MeB(C(6)F(5))(3)(-). In general, mm stereodefect production is only modestly anion-sensitive; [propylene] dependence studies reveal enantiofacial propylene misinsertion to be the prevailing mm-generating process in all systems at 60 degrees C, being most dominant with 6, where mm stereodefect abundance is lowest. For 1,3-dichlorobenzene as the polymerization solvent, product syndiotacticity, as well as m and mm stereodefects, become indistinguishable for all cocatalysts. These observations are consistent with a scenario in which ion pairing modulates the rates of stereodefect generating processes relative to monomer enchainment, hence net enchainment syndioselectivity, and also dictates the rate of termination relative to propagation and the preferred termination pathway. In comparison to 3-6, propylene polymerization mediated by MAO (2) + 1 in toluene reveals an estimated ordering in site epimerization rates as 5 > 4 > 2 > 3 > 6, while product syndiotacticities rank as 6 > 2 > 5 approximately 4 > 3.

Journal Article↗
PubMed2004

Organolanthanide-catalyzed intramolecular hydroamination/cyclization/bicyclization of sterically encumbered substrates. Scope, selectivity, and catalyst thermal stability for amine-tethered unactivated 1,2-disubstituted alkenes.

This paper reports the organolanthanide-catalyzed intramolecular hydroamination/cyclization of amine-tethered unactivated 1,2-disubstituted alkenes to afford the corresponding mono- and disubstituted pyrrolidines and piperidines using coordinatively unsaturated complexes of the type (eta(5)-Me(5)C(5))(2)LnCH(TMS)(2) (Ln = La, Sm), [Me(2)Si(eta(5)-Me(4)C(5))(2)]SmCH(TMS)(2), and [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) (Ln = Sm, Y, Yb, Lu; E = N, CH) as precatalysts. [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) mediates intramolecular hydroamination/cyclization of sterically demanding amino-olefins to afford disubstituted pyrrolidines in high diastereoselectivity (trans/cis = 16/1) and good to excellent yield. In addition, chiral C(1)-symmetric organolanthanide catalysts of the type [Me(2)Si(OHF)(CpR*)]LnN(TMS)(2) (OHF = eta(5)-octahydrofluorenyl; Cp = eta(5)-C(5)H(3); R* = (-)-menthyl; Ln = Sm, Y), and [Me(2)Si(eta(5)-Me(4)C(5))(CpR*)]SmN(TMS)(2) (Cp = eta(5)-H(3)C(5); R* = (-)-menthyl) mediate asymmetric intramolecular hydroamination/cyclization of amines bearing internal olefins and afford chiral 2-substituted piperidine and pyrrolidine in enantioselectivities as high as 84:16 er at 60 degrees C. The substrate of the structure NH(2)CH(2)CMe(2)CH(2)CH=CH(CH(2))(2)CH=CH(2) is regiospecifically bicyclized by [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) to the corresponding indolizidine skeleton in good yield and high diastereoselectivity. Thermolysis of (eta(5)-Me(5)C(5))(2)LaCH(TMS)(2) in cyclohexane-d(12) at 120 degrees C rapidly releases CH(2)(SiMe(3))(2) and leads to possible formation of fulvene (eta(6)-Me(4)C(5)CH(2)-) species. The thermolysis product readily reverts to active catalysts upon protonolysis by substrate and exhibits the same catalytic activity as the (eta(5),eta(1)-Me(5)C(5))(2)LaCH(TMS)(2) precatalyst at 120 degrees C in the cyclization of cis-2,2-dimethylhept-5-enylamine. Catalytically-active lanthanide-amido complexes (eta(5)-Me(5)C(5))(2)La(NHR)(NH(2)R)(n) and [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]Sm(NHR)(NH(2)R)(n) are shown to be thermally robust species.

Journal Article↗
PubMed2004

NOE and PGSE NMR spectroscopic studies of solution structure and aggregation in metallocenium ion-pairs.

The solution structures of the metallocenium homogeneous polymerization catalyst ion-pairs [Cp(2)ZrMe](+)[MeB(C(6)F(5))(3)](-) (1), [(1,2-Me(2)Cp)(2)ZrMe](+)[MeB(C(6)F(5))(3)](-) (2), [(Me(2)SiCp(2))ZrMe](+)[MeB(C(6)F(5))(3)](-) (3), [Me(2)C(Fluorenyl)(Cp)ZrMe](+)[FPBA](-) (FPBA = tris(2,2',2' '-nonafluorobiphenyl)fluoroaluminate) (4), [rac-Et(Indenyl)(2)ZrMe](+)[FPBA](-) (5), [(Me(5)Cp)(2)ThMe](+)[B(C(6)F(5))(4)](-) (6), [(Me(2)SiCp(2))Zr(Me)(THF)](+)[MeB(C(6)F(5))(3)](-) (7), [(Me(2)SiCp(2))Zr(Me)(PPh(3))](+)[MeB(C(6)F(5))(3)](-) (8), [(Me(2)SiCp(2))Zr(Me)(THF)](+)[B(C(6)F(5))(4)](-) (9), [(Me(2)Si(Me(4)Cp)(t-BuN)Zr(Me)(solvent)](+)[B(C(6)F(5))(4)](-) (solvent = benzene, toluene) (10), [(Cp(2)ZrMe)(2)(mu-Me)](+)[MePBB](-) (PBB = tris(2,2',2"-nonafluorobiphenyl)borane) (11), and [(Cp(2)Zr)(2)(mu-CH(2))(mu-Me)](+)[MePBB](-) (12), having the counteranion in the inner (1, 3, 4, 5, and 6) or outer (7, 8, 9, 10, 11, and 12) coordination sphere, have been investigated for the first time in solvents with low relative permittivity such as benzene or toluene by (1)H NOESY and (1)H,(19)F HOESY NMR spectroscopy. It is found that the average interionic solution structures of the inner sphere contact ion-pairs are similar to those in the solid state with the anion B-Me (1, 3) or Al-F (5) vectors oriented toward the free zirconium coordination site. The HOESY spectrum of complex 6 is in agreement with the reported solid-state structure. In contrast, in outer sphere contact ion-pairs 7, 8, 9, and 10, the anion is located far from the Zr-Me(+) moiety and much nearer to the Me(2)Si bridge than in 3. The interionic structure of 8 is concentration-dependent, and for concentrations greater than 2 mM, a loss of structural localization is observed. PGSE NMR measurements as a function of concentration (0.1-5.0 mM) indicate that the tendency to form aggregates of nuclearity higher than simple ion-pairs is dependent on whether the anion is in the inner or outer coordination sphere of the metallocenium cation. Complexes 2, 3, 4, 5, and 6 show no evidence of aggregation up to 5 mM (well above concentrations typically used in catalysis) or at the limit of saturated solutions (complexes 3 and 6), while concentration-dependent behavior is observed for complexes 7, 8, 10, and 11. These outer sphere ion-pairs begin to exhibit significant evidence for ion-quadruples in solutions having concentrations greater than 0.5 mM with the tendency to aggregate being a function of metal ligation and anion structure. Above 2 mM, compound 8 exists as higher aggregates that are probably responsible for the loss of interionic structural specificity.

Journal Article↗