Biomedical subjects

Thomas Bredow

Publications and source records attributed to Thomas Bredow.

10 recordsLinked to original sources

PubMed2006

Ionic conductivity of Li2B4O7.

The formation and mobility of Li point defects in Li(2)B(4)O(7) are investigated theoretically with periodic quantum chemical calculations. Calculated defect formation energies obtained with a density functional theory/Hartree-Fock hybrid method and with the Perdew-Wang density functional method are compared. The basis set effect is investigated by comparison of results obtained with atom-centered basis functions and plane waves. With both methods only a moderate relaxation is observed for the atoms surrounding the Li defect position. The defect-induced change of electronic properties is investigated by calculating the density of states for the stoichiometric and defective supercells. The activation energy for the movement of a Li(+) ion along the (001) direction is calculated. It is observed that Li(+) ion migrates through a one-dimensional channel formed by the five-vertex lithium-oxygen (LiO(5)) polyhedra. The calculated activation energies are in excellent accord with experiment.

Journal Article↗

PubMed2006

Organometallic benzene-vanadium wire: A one-dimensional half-metallic ferromagnet.

Using density functional theory we perform theoretical investigations of the electronic properties of a freestanding one-dimensional organometallic vanadium-benzene wire. This system represents the limiting case of multidecker Vn(C6H6)(n+1) clusters which can be synthesized with established methods. We predict that the ground state of the wire is a 100% spin-polarized ferromagnet (half-metal). Its density of states is metallic at the Fermi energy for the minority electrons and shows a semiconductor gap for the majority electrons. We find that the half-metallic behavior is conserved up to 12% longitudinal elongation of the wire. Ab initio electron transport calculations reveal that finite size vanadium-benzene clusters coupled to ferromagnetic Ni or Co electrodes will work as nearly perfect spin filters.

Journal Article↗

PubMed2006

ATR-FTIR measurements and quantum chemical calculations concerning the adsorption and photoreaction of oxalic acid on TiO2.

The adsorption and photoreaction of oxalic acid on the surface of anatase and rutile TiO2 nanoparticles have been studied using a combined experimental and theoretical approach. In the dark, the experimental adsorption reaches an equilibrium state that can be described as a mixture of adsorbed water and oxalic acid molecules, with the latter forming two different surface complexes on anatase and one on rutile particles. When the system is subsequently illuminated with UV(A) light, the surface becomes enriched with absorbed oxalic acid, which replaces photo-desorbed water molecules, and one of the adsorbed oxalic acid structures on anatase is favoured over the other.

Adsorption↗

PubMed2006

Theoretical analysis of structural, energetic, electronic, and defect properties of Li2O.

The structural, energetic, and electronic properties of stoichiometric and defective Li(2)O were studied theoretically. The reliability of the Perdew-Wang method in the framework of density functional theory (DFT), and of two DFT/Hartree-Fock hybrid methods (PW1PW and B3LYP), was examined by comparison of calculated and available experimental data. Atom-centered orbitals and plane waves were used as basis functions for the crystalline orbitals. For both cases, the basis set dependence of calculated properties was investigated. With most of the methods, good agreement with the experimental Li(2)O lattice parameter and cohesive energy was obtained. In accordance with experiment, the analysis of electronic properties shows that Li(2)O is a wide gap insulator. Among the considered methods, the hybrid methods PW1PW and B3LYP give the best agreement with experiment for the band gap. The formation of an isolated cation vacancy defect and an F center in Li(2)O were studied. The effect of local relaxation on the calculated defect formation energies and the defect-induced changes of electronic properties were investigated and compared to available experimental results. The migration of a Li(+) ion in Li(2)O bulk was investigated. The activation energy for the migration of a Li(+) ion from its regular tetrahedral site to an adjacent cation vacancy was calculated, including the effect of local relaxation. The calculated activation barriers, 0.27-0.33 eV, are in excellent agreement with experiment.

Journal Article↗

PubMed2006

Adsorption of functionalized benzoic acids on MgSO4.H2O (100).

Using a combination of ab initio and semiempirical methods, adsorption problems on surfaces with large unit cells and low symmetry can still be studied. Here, a hybrid approach of density functional theory (DFT) and Hartree-Fock (HF) was used. As an example, we determined the geometry and the electronic properties of benzoic acid (BA), salicylic acid (SA) and para-salicylic acid (p-SA) adsorbed on MgSO(4).H(2)O (100), which are used as conditioner molecules for the electrostatic separation of minerals. Contrary to general expectations, these molecules are chemisorbed, with binding energies around 1.9 eV, forming bonds through the carboxylic O atom of the COOH groups in a nonplanar geometry, although the surface is a stoichiometric wide-band-gap insulator and the molecules stay intact. In contrast, a planar adsorption geometry turned out to be nonbonding. Bonding takes place by means of surface-molecule resonances due to the overlap of the valence band with molecular orbitals, assisted by a small charge-transfer molecule to the surface of around 0.15e. These combined interactions cause an intramolecular twist between the COOH group and the benzene ring.

Journal Article↗

PubMed2005

Structural and electronic properties of Li(2)b(4)O(7).

The reliability of various quantum-chemical approaches for the calculation of bulk properties of lithium tetraborate Li(2)B(4)O(7) was examined. Lattice parameters and the electronic structure obtained with density-functional theory (DFT), with DFT-Hartree-Fock (HF) hybrid methods, and with the semiempirical method MSINDO were compared to available experimental data. We also compared the results at DFT level using different wave functions, either based on linear combinations of atom-centered orbitals (LCAO), or on plane waves, as implemented in the crystalline orbital programs CRYSTAL and VASP. The basis set dependence of calculated properties was investigated for the LCAO method. In the plane wave approach ultrasoft pseudopotentials (US PP), and projector-augmented wave (PAW) potentials were used to represent the core electrons. For all methods under consideration, the calculated Li(2)B(4)O(7) structure parameters are close to each other and agree within a few percent with measured values. A more pronounced method dependence was found for the band structure, the band gap and the cohesive energy. Closest agreement between theoretical and experimental results for the band gap was obtained with the DFT-HF hybrid methods while pure DFT methods underestimate and HF based methods overestimate the measured value. It was found that the calculated band gap strongly depends on the atomic basis set in the LCAO approach. The description of the core electrons considerably affects the cohesive energy obtained with the plane wave approach. Atomic charges based on a Mulliken analysis were compared to effective charges obtained from Raman spectroscopy. Electron density maps are used to analyze the character of B-O and Li-O interactions.

Journal Article↗

PubMed2005

Toward an understanding of the formation of vanadia-titania catalysts.

Structures of hydrated vanadia species on the TiO2-anatase surfaces were investigated using the semiempirical molecular orbital method MSINDO. The (101), (001), and (100) surfaces of anatase were considered. They were modeled by appropriate two-dimensional cyclic clusters of TiO2. Monomeric and dimeric hydrated vanadia species on the anatase surfaces were simulated by adsorbing VO4H3 and V2O7H4 molecules, respectively. Different adsorption structures were considered, and their stabilities at 300 and 600 K were tested by constant-temperature Born-Oppenheimer molecular dynamics simulations in the framework of MSINDO. Structural features of the vanadia-titania catalysts found in extended X-ray absorption fine structure, secondary ion mass spectrometry, IR, Raman, and NMR spectroscopy and conductivity experiments can be explained by the present calculations.

Journal Article↗

PubMed2005

Molecular dynamics investigation of oxygen vacancy diffusion in rutile.

Oxygen vacancy diffusion in rutile was studied by Born-Oppenheimer molecular dynamics techniques in the framework of the semiempirical molecular orbital method MSINDO. Migration of an oxygen vacancy from the rutile (110) surface towards the bulk was simulated. The metadynamics technique was employed to accelerate the diffusion processes. In this way, transition state structures and activation energies for the diffusion processes were obtained. Rate constants and the time scale of diffusion processes were estimated for different temperatures using the calculated activation energy. It was found that the vacancies in the bulk are less stable than on the surface. The feasibility of oxygen vacancy diffusion under experimental conditions is discussed.

Computer Simulation↗

PubMed2004

Molecular dynamics implementation in MSINDO: study of silicon clusters.

Born-Oppenheimer molecular dynamics is implemented in the semiempirical self-consistent field molecular orbital method MSINDO. The method is employed for the investigation of the structure and dynamics of silicon clusters of various sizes. The reliability of the present parameterization for silicon compounds is demonstrated by a comparison of the results of simulated annealing and of density functional calculations of Si(n) clusters (n = 5-7). The melting behavior of the Si(7) cluster is investigated and the MSINDO results are compared to previous high-level calculations. The efficiency of the present approach for the treatment of large systems is demonstrated by an extensive simulated annealing study of the Si(45) and Si(60) clusters. New Si(45) and Si(60) structures are found and evaluated. The relative stability of various energy minimum structures is compared with density functional calculations and available literature data.

Journal Article↗

PubMed2004

Models for the treatment of crystalline solids and surfaces.

Crystalline solids and surfaces have become a subject of growing interest. The difficulty of a comprehensive description of a variety of phenomena by a single method has led to the development of many models. These models can be classified as nonperiodic and periodic models. The former include free clusters, saturated clusters, and embedded clusters. The latter two models serve to remove the boundary effects of the free clusters. No perfect avoidance of such effects can be achieved in this way. The cyclic cluster model overcomes this difficulty in a natural way. It is periodic with a finite periodicity. An embedding can take into account a long-range effect in ionic crystals. Previous periodic approaches relied on the large unit cell model, which is related to the supercell approach. For perfect crystals the conventional unit cell approach is a well-known standard. However, its disadvantage is the unphysical periodicity of defects, which is avoided in the cyclic cluster model. The present article presents a description of these models together with selective applications to solid-state systems and surfaces.

Journal Article↗