Biomedical subjects

Tetsuro Fujisawa

Publications and source records attributed to Tetsuro Fujisawa.

25 records · Page 2Linked to original sources

PubMed2003

Static and dynamic x-ray diffraction recordings from living mammalian and amphibian skeletal muscles.

Static and time-resolved two-dimensional x-ray diffraction patterns, recorded from the living mouse diaphragm muscle, were compared with those from living frog sartorius muscle. The resting pattern of mouse muscle was similar to that of frog muscle, and consisted of actin- and myosin-based reflections with spacings basically identical to those of frog. As a notable exception, the sampling pattern of the myosin layer lines (MLL's) indicated that the mouse myofilaments were not organized into a superlattice as in frog. The intensity changes of reflections upon activation were also similar. The MLL's of both muscles were markedly weakened. Stereospecific (rigorlike) actomyosin species were not significantly populated in either muscle, as was evidenced by the 6th actin layer line (ALL), which was substantially enhanced but without a shift in its peak position or a concomitant rise of lower order ALL's. On close examination of the mouse pattern, however, a few lower order ALL's were found to rise, slightly but definitely, at the position expected for stereospecific binding. Their quick rise after the onset of stimulation indicates that this stereospecific complex is generated in the process of normal contraction. However, their rise is still too small to account for the marked enhancement of the 6th ALL, which is better explained by a myosin-induced structural change of actin. Since the forces of the two muscles are comparable regardless of the amount of stereospecific complex, it would be natural to consider that most of the force of skeletal muscle is supported by nonstereospecific actomyosin species.

Actins↗

PubMed2002

The effects of aggregation-inducing motifs on amyloid formation of model proteins related to neurodegenerative diseases.

To examine the effects of aggregation-inducing motifs related to neurodegenerative diseases on amyloid formation of host protein, we prepared several chimera myoglobins, in which various aggregation-inducing motifs were inserted. The focused aggregation-inducing motifs included five (R5) or two (R2) oligopeptide repeats in yeast Sup35p, five octapeptide repeats (OPR) in the human prion protein, a nonamyloid beta component (NAC) in alpha-synuclein, and tandem repeats of 50 glutamines (Q50). Circular dichroism and infrared spectroscopies suggested that the OPR, R5, and Q50 motifs formed an antiparallel beta sheet as well as a random coil, whereas the R2 and NAC motifs mainly formed random coils. The OPR, R5, and Q50 mutants, but not the R2 and NAC mutants, readily formed the SDS-resistant aggregates under physiological condition, and electron microscopy revealed that the aggregates contained amyloid fibrils. The destabilization and increase in gyration radius of the OPR, R5, and Q50 mutants correlated with the tendency to form amyloid fibrils. A control mutant bearing a nonamyloidgenic sequence was also moderately destabilized but did not form amyloid fibrils. Therefore, we concluded that the OPR, R5, and Q50 motifs, even in a quite stable protein such as myoglobin, led the host protein to formation of amyloid fibrils under physiological condition.

Amino Acid Motifs↗

PubMed2002

States of thin filament regulatory proteins as revealed by combined cross-linking/X-ray diffraction techniques.

The regulatory protein system in the skeletal muscle thin filaments is known to exhibit three discrete states, called "off" or "blocked" (no Ca2+), "on" or "closed" (with Ca2+ alone) and "potentiated" or "open" (with strongly bound myosin head) states. Biochemical studies have shown that only weak interactions with myosin are allowed in the second state. Characterization of each state is often difficult, because the equilibria among these states are readily shifted by experimental conditions. To overcome this problem, we chemically cross-linked the skeletal muscle thin filament in the three states with the zero-length cross-linker 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC), in overstretched muscle fibers. The state of the regulatory proteins was monitored by measuring the intensity of the second actin layer-line (2nd LL) reflection in X-ray diffraction patterns. Structurally, the thin filaments cross-linked in the three states exhibited three corresponding discrete levels of 2nd LL intensities, which were not Ca2+-sensitive any more. Functionally, the thin filament cross-linked in the "off-blocked" state inhibited strong interaction with myosin head (subgfragment-1 or S1). The thin filament cross-linked in the "potentiated-open" state allowed strong interaction and full ATPase activity of S1 as described previously. The thin filament cross-linked in the "on-closed" state allowed strong interactions with S1 and actin-activated ATPase without enhancing the 2nd LL to the level of "potentiated-open" state, contrary to the expectations from the biochemical studies. The results demonstrate the potential of EDC as a tool for studying the states of calcium regulation, and the apparent uncoupling between the 2nd LL intensity and the function provides a new insight into the mechanism of thin filament regulation.

Actins↗

PubMed2002

Conformational landscape of cytochrome c folding studied by microsecond-resolved small-angle x-ray scattering.

To investigate protein folding dynamics in terms of compactness, we developed a continuous-flow mixing device to make small-angle x-ray scattering measurements with the time resolution of 160 micros and characterized the radius of gyration (R(g)) of two folding intermediates of cytochrome c (cyt c). The early intermediate possesses approximately 20 A of R(g), which is smaller by approximately 4 A than that of the acid-unfolded state. The R(g) of the later intermediate is approximately 18 A, which is close to that of the molten globule state. Considering the alpha-helix content (f(H)) of the intermediates, we clarified the folding pathway of cyt c on the conformational landscape defined by R(g) and f(H). Cyt c folding proceeds with a collapse around a specific region of the protein followed by a cooperative acquisition of secondary structures and compactness.

Cytochromes↗

PubMed2002

Direct x-ray observation of a single hexagonal myofilament lattice in native myofibrils of striated muscle.

A striated muscle fiber consists of thousands of myofibrils with crystalline hexagonal myofilament lattices. Because the lattices are randomly oriented, the fiber gives rise to an equatorial x-ray diffraction pattern, which is essentially a rotary-averaged "powder diffraction," carrying only information about the distance between the lattice planes. We were able to record an x-ray diffraction pattern from a single myofilament lattice, very likely originating from a single myofibril from the flight muscle of a bumblebee, by orienting the incident x-ray microbeam along the myofibrillar axis (end-on diffraction). The pattern consisted of a number of hexagonally symmetrical diffraction spots whose originating lattice planes were readily identified. This also held true for some of the weak higher order reflections. The spot-like appearance of reflections implies that the lattice order is extremely well maintained for a distance of millimeters, covering up to a thousand of approximately 2.5-microm-long sarcomeres connected in series. The results open the possibility of applying the x-ray microdiffraction technique to study many other micrometer-sized assemblies of functional biomolecules in the cell.

Animals↗

PubMed2002

Oligomerization process of the hemolytic lectin CEL-III purified from a sea cucumber, Cucumaria echinata.

CEL-III is a Ca(2+)-dependent lectin purified from a sea cucumber, Cucumaria echinata. This protein exhibits strong hemolytic activity as well as cytotoxicity toward some cultured cell lines. Hemolysis is caused by CEL-III oligomers formed in the cell membrane after binding to specific carbohydrate chains on the cell surface. We have found that the oligomerization of CEL-III is also induced by the binding of simple carbohydrates, such as lactose, in aqueous solution under high pH and high ionic strength conditions. From gel filtration analysis of the oligomerization of CEL-III, it was found that the formation of the CEL-III oligomer is effectively induced by the binding of lactose and lactulose, disaccharides containing a beta-galactoside structure. Electron micrographs of the resulting oligomers revealed them to exist as particles with a size of approximately 20-30 nm. The oligomerization process required more than 1 h, which is consistent with the increase in surface hydrophobicity as measured using a fluorescent probe, 8-anilinonaphthalene-1-sulfonate. However, a change in the far-UV CD spectra as well as small-angle X-ray scattering occurred within a few minutes, suggesting that a structural change in the protein takes place rapidly, but the following growth of the oligomer is a much slower process.

Anilino Naphthalenesulfonates↗

PubMedDate not supplied

Time-resolved X-ray diffraction study on poly[(R)-3-hydroxybutyrate] films during two-step-drawing: generation mechanism of planar zigzag structure.

Uniaxially oriented films with high tensile strength were processed from ultrahigh-molecular-weight poly[(R)-3-hydroxybutyrate] (P(3HB)) by a method combining hot-drawing near the melting point of the polymer and two-step-drawing at room temperature. In a two-step-drawn and subsequently annealed film, P(3HB) molecular chains fall into two states: 2/1 helix (alpha-form) and planar zigzag (beta-form) conformations. The mechanism for generating the beta-form during two-step-drawing was investigated by time-resolved synchrotron wide- and small-angle X-ray scattering measurements (WAXD and SAXS), together with the measurement of stress-strain curves. It was found that the improvement of mechanical properties is due to not only the orientation of molecular chains but also the generation of the beta-form during the drawing. The crystal and molecular structures of the alpha-form remained unchanged until the yield point of the stress-strain curve. At the yield point, the long period obtained from SAXS doubled and a new reflection indicative of the beta-form was observed on the equatorial line in WAXD. The intensity of the reflection from the beta-form increased with an increase in the two-step-drawing ratio at room temperature. The SAXS pattern changed from a two-point reflection along the meridian to a cross pattern with streaking on the equatorial line, demonstrating the close alignment of shish-kebab structures. The reflection intensity, crystal orientation and crystal size of the alpha-form decreased during two-step-drawing. Based on these results, the beta-form is mainly introduced from the orientation of free molecular chains in the amorphous regions between alpha-form lamellar crystals, but the structural transformation of molecular chains also occurs from the alpha-form to the beta-form at the deformed lamellar crystals.

Hydroxybutyrates↗