Biomedical subjects

Tai-Horng Young

Publications and source records attributed to Tai-Horng Young.

At least 19 recordsLinked to original sources

PubMed2006

The differentiation of mesenchymal stem cells by mechanical stress or/and co-culture system.

Differentiation of mesenchymal stem cells (MSCs) into anterior cruciate ligament (ACL) cells is regulated by many factors. Mechanical stress affects the healing and remodeling process of ACL after surgery in important ways. Besides, co-culture system had also showed the promise to induce MSCs toward different kinds of cells on current research. The purpose of this study was to investigate the gene expression of ACL cells' major extracellular matrix (ECM) component molecules of MSCs under three induction groups. In addition, to follow our previous study, cell electrophoresis technique and mRNA level gene expression of MSC protein were also used to analyze the differentiation of MSCs. The results reveal that specific regulatory signals which released from ACL cells appear to be responsible for supporting the selective differentiation toward ligament cells in co-culture system and mechanical stress promotes the secretion of key ligament ECM components. Therefore, the combined regulation could assist the development of healing and remolding of ACL tissue engineering. Furthermore, this study also verifies that cell electrophoresis could be used in investigation of cell differentiation. Importantly, analysis of the data suggests the feasibility of utilizing MSCs in clinical applications for repairing or regenerating ACL tissue.

Cell Differentiation↗

PubMed2006

The alteration of cell membrane charge after cultured on polymer membranes.

In this work, cell electrophoresis, measuring the electrophoretic mobility of cells, was used to investigate the variation of surface charge property of cells after cultured on different polymer membranes. HepG2 cell line, derived from a well-differentiated, human hepatoma, was used as a model cell. The polymer biomaterials used in this study included polyvinyl alcohol (PVA), poly(ethylene-co-vinyl alcohol) (EVAL), and polyvinylidene fluoride (PVDF). For cells cultured in the presence of serum, cell mobility after being cultured on PVA substrates was considerably higher than that on EVAL or PVDF substrates. This effect was completely suppressed by cycloheximide (CHX) in the serum-free medium. Taken together, the cell surface charge property can be altered after cells cultured on different polymer substrates. The precise mechanism by which the variation of electrophoretic mobility of cultured cells is unknown, but it is reasonable to assume that the polymer substrates could influence the absorption of serum proteins on cell membrane surface to change cell electrophoretic mobility and, simultaneously, to regulate adhesion, growth and function of cultured cells.

Cell Adhesion↗

PubMed2006

Differences in the effect on neural stem cells of fetal bovine serum in substrate-coated and soluble form.

The influence of fetal bovine serum (FBS) adsorbed to poly(ethylene-co-vinyl alcohol) (EVAL) and polyvinyl alcohol (PVA) substrates (coated FBS) and FBS present in the culture medium (soluble FBS) on the behavior of embryonic rat cerebral cortical neural stem cells was studied at neurosphere level. When both coated FBS and soluble FBS were not present in the culture system, the fate and behavior of neurospheres were mediated mainly by the substrates used. When neurospheres were cultured either on FBS-coated EVAL or FBS-coated PVA substrates in the serum-free medium, the most striking morphological characteristic of neurospheres was that these neurosphere-forming cells attached and were induced to differentiate into process-bearing cell phenotypes predominantly; however, the differentiated cell phenotypes were dissimilar on these two substrates. On the contrary, when neurospheres were cultured in the medium containing 10% FBS, the neurosphere-forming cells were induced into protoplasmic cells typically but no difference in differentiated cell phenotypes on EVAL and PVA substrates was observed. Interestingly, instead of promoting process outgrowth under serum-free medium condition, coated FBS enhanced migration of differentiated protoplasmic cells when soluble FBS were present. These results inform that the substrates, coated serum, and soluble serum within the culture environment together can significantly alter cell behavior and morphological differentiation and will therefore be an important clue for the development of biomaterials to regulate the potential of the CNS neural stem cells.

Animals↗

PubMed2006

Study on the effects of nylon-chitosan-blended membranes on the spheroid-forming activity of human melanocytes.

Though reported limitedly in tissue engineering, modification of cellular functions can be achieved by culturing them into multicellular spheroids. We have shown melanocytes form spheroids on chitosan surface. However, how biomaterials promote spheroid formation has never been systemically investigated. In this work, nylon, which inhibits melanocyte spheroid formation, and chitosan, which promotes melanocyte spheroid formation, are used to prepare nylon/chitosan-blended membranes. Membranes composed of pure nylon, pure chitosan and various ratios of nylon and chitosan are employed to examine their effects on spheroid formation. Melanocytes show better adhesion to nylon membranes than that to chitosan membranes. In blended membranes, as more nylon is incorporated, cell adhesion increases and the trend for spheroid formation decreases. Melanocytes can only form spheroids on membranes with poorer cell adhesion. Examining the surface of the blended membranes shows phase separation of nylon and chitosan. As nylon content increases, the nylon phase on the membrane surface increases and thereby enhances cell adhesion. The opposite trend for cell adhesion and spheroid formation substantiates our hypothesis of spheroid formation on biomaterials: a balance between cell-substrate interaction and cell-cell interaction. The decrease in cell-substrate interaction tilts the balance to a state more favorable for spheroid formation. Our work can serve as a model to investigate the relative strengths of cell-cell and cell-substrate interactions and also pave way to design blended membranes with desired physical properties while preserving the spheroid-forming activity.

Biocompatible Materials↗

PubMed2006

The effect of chitosan and PVDF substrates on the behavior of embryonic rat cerebral cortical stem cells.

In this study, the behavior of neural stem cells from embryonic rat cerebral cortex were compared on the chitosan and poly(vinylidene fluoride) (PVDF) substrates at single-cell and neurosphere level. It was found that chitosan and PVDF substrates inhibited the proliferation and differentiation of single neural stem cells. It seemed that single-cell cultures on both substrates show cells remained dormant. However, neurospheres could exhibit different or similar behavior on these two substrates, which is dependent on the presence or absence of serum. More cells migrated outside from the neurospheres and longer processes extended from differentiated cells on chitosan than on PVDF when neurospheres were cultured in the serum-free medium. On the contrary, when serum was added to the culture system, chitosan and PVDF could induce the neurosphere-forming cells into an extensive cellular substratum of protoplasmic cells upon which process-bearing cells spread. In addition, based on the immunocytochemical analysis, the percentages of differentiated cell phenotypes of neurospheres cultured on chitosan and PVDF substrates became similar in the presence of serum. Therefore, it is reasonable to suggest that biomaterials may stimulate or inhibit the proliferation and differentiation of neural stem cells according to the complex environmental conditions. The information presented here should be useful for the development of biomaterials to regulate the preservation, proliferation, and differentiation of neural stem cells.

Animals↗

PubMed2006

Role of phase diagram of membrane formation system in controlling the crystallinity and degradation rate of PLLA membranes.

In this work, the theoretical phase diagram of membrane formation system of ethanol, methylene chloride, and poly-L-lactide (PLLA) was studied. On the basis of the phase diagram, particulate and porous membranes, dominated by crystallization and liquid-liquid demixing, respectively, were prepared. Furthermore, degradation of PLLA membranes with particulate, porous, and dense morphologies was performed in phosphate buffered solution (PBS) at 37 degrees C for 168 days and was investigated by mass loss, scanning electron microscopy (SEM), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). Besides the membrane morphology, a close relationship between the phase behavior of the membrane formation system and the membrane crystallinity was found, which in turn influenced the degradation rate of these membranes significantly. In the case of dense membranes, it showed the lowest initial crystallinity and the greatest rate of mass loss and molecular weight decrease compared with particulate and porous membranes. In contrast, the particulate membranes had the highest crystallinity and the slowest degradation rate in this study. Therefore, the phase diagram of membrane formation system could not only anticipate membrane morphology, but could also control the membrane crystallinity and degradation rate simultaneously.

Biocompatible Materials↗

PubMed2006

Assessment of GaN chips for culturing cerebellar granule neurons.

In this work, the behaviors of cerebellar granule neurons prepared from 7-day-old Wistar rats on gallium nitride (GaN) were investigated. We believe that this is the first time that the GaN has been used as a substrate for neuron cultures to examine its effect on cell response in vitro. The GaN surface structure and its relationship with cells were examined by atomic force microscopy (AFM), metallography microscopy, scanning electron microscopy (SEM), lactate dehydrogenase (LDH) release and Western blot analysis. GaN is a so-called III-V compound semiconductor material with a wide bandgap and a relatively high bandgap voltage. Compared with silicon used for most neural chips, neurons seeded on GaN were able to form an extensive neuritic network and expressed very high levels of GAP-43 coincident with the neurite outgrowth. Therefore, the GaN structure may spatially mediate cellular response that can promote neuronal cell attachment, differentiation and neuritic growth. The favorable biocompatibility characteristics of GaN can be used to measure electric signals from networks of neuronal cells in culture to make it a possible candidate for use in a microelectrode array.

Animals↗

PubMed2006

Proliferation and differentiation of neural stem cells on lysine-alanine sequential polymer substrates.

The purpose of this study was to explore the phenotypic potential of embryonic rat cerebral cortical stem cells by inducing differentiation on lysine-alanine sequential (LAS) polymer substrates at neurosphere level. LAS polymer is a heterologous polymer of lysine and alanine and has been demonstrated to enhance axon growth of neurons in a serum-free medium in vitro. It was found that very few cells migrated outside of the neurospheres but extremely long processes extended from differentiated cells could form a network between remote neurospheres when cells were cultured on LAS substrates at a low density of 120 neurospheres/cm(2) in the serum-free medium. On the contrary, when the neurosphere density was increased to 360 neurospheres/cm(2), many neurosphere-forming cells migrated out from their original aggregate and exhibited short processes morphology. Furthermore, when serum was added to the culture system, the neurosphere-forming cells could be induced into an extensive cellular substratum of protoplasmic cells upon which process-bearing cells spread. Clearly, neurospheres could exhibit different behaviors on LAS substrates according to the complex environmental conditions. Here, we proposed that neurospheres would change their social communication and adopt different strategies to communicate with other neurospheres when they detected each other's presence. Therefore, the mediation of cell behavior on LAS substrates by communication between neurospheres should be taken into account.

Animals↗

PubMed2006

Elucidating in vitro cell-cell interaction using a microfluidic coculture system.

This work presents a novel microfluidic coculture system that improves the accuracy of evaluating the interaction between cocultured cell types. A microfluidic coculture chip, fabricated by CO(2) laser direct-writing on polymethyl methacrylate (PMMA), was designed to separate two cell types using a microchannel, while permitting transfer of cellular media. The system has two up-stream wells and five down-stream wells. As an example, released inflammatory cytokines (e.g., interleukin-1 beta (IL-1 beta) and tumor necrosis factor-alpha (TNF-alpha)), activated in up-stream macrophages, flow through a microfluidic mixing system, generating linear concentration gradients in down-stream wells and inducing down-stream osteoblasts to release prostaglandin E2 (PGE2), a well-known bone resorption marker. Osteoblast viability was assessed by 3-[4, 5-dimethylthiazol-2-yl]-2, 5-diphenyltetrazolium bromide (MTT) assay. This novel coculture system can be applied to evaluate cell-cell interaction while physically separating interacting cells.

Cell Communication↗

PubMed2005

Enhanced cell survival of melanocyte spheroids in serum starvation condition.

Autologous melanocyte transplantation for vitiligo treatment by use of melanocyte suspension has drawbacks including cell damage in cell preparation and transportation, difficult manipulation and low engraftment rate in acral vitiligious lesions. We have proposed the concept of cellular patch as an alternative solution. In the development of melanocyte patches, we have shown that chitosan membrane supports the growth and phenotype expression of melanocytes. Surprisingly, melanocytes spontaneously grow into three-dimensional spheroids on chitosan-coated surface. In this work, we demonstrate that, compared with monolayered melanocytes, melanocyte spheroids show a better survival in growth factor and serum-deprived condition. Survival of melanocytes is further ameliorated when a greater portion of melanocytes is precultured into spheroidal morphology. Melanocyte spheroids disintegrate and the cells return to a physiological dendritic morphology after they are reinoculated on collagen I-coated surface. Our results show that melanocytes are morphologically transformable depending on the substratum used and spheroidal melanocytes have a superior survival to that of monolayered dendritic melanocytes in stringent conditions. Preculturing melanocytes into spheroids can provide melanocytes a survival advantage. Chitosan-based melanocyte patch can be a promising method to enhance the engraftment rate and facilitate the cell preparation and transplantation procedures in melanocyte transplantation for vitiligo treatment.

Biocompatible Materials↗

PubMed2005

Evaluating cutaneous photoaging by use of multiphoton fluorescence and second-harmonic generation microscopy.

The photoaging process of facial skin is investigated by use of multiphoton fluorescence and second-harmonic generation (SHG) microscopy. We obtain the autofluorescence (AF) and SHG images of the superficial dermis from the facial skin of three patients aged 20, 40, and 70 years. The results show that areas of AF increase with age, whereas areas of SHG decrease with age. The results are consistent with the histological findings in which collagen is progressively replaced by elastic fibers. The AF and SHG changes in photoaging are quantified by a SHG to autofluorescence aging index of dermis (SAAID). Our results suggest that SAAID can be a good indicator of the severity of photoaging.

Adult↗

PubMed2005

Interactions of acinar cells on biomaterials with various surface properties.

The purpose of this study is to evaluate the interactions of rat parotid acinar cells on biomaterials with different surface properties. The biomaterials used in this study included polyvinyl alcohol (PVA), chitosan, poly (ethylene-co-vinyl alcohol) (EVAL), and polyvinylidene fluoride (PVDF). Cell morphology was observed by photomicroscope. Cell growth and differentiated characteristic function were separately assayed with 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) reduction activity and amylase activity. Results indicated that behaviors of acinar cells on materials might differ to a great extent depending on the surface hydrophilicity and morphology of the materials. On the relatively hydrophobic materials, the abilities of acinar cells to adhere and proliferate increased simultaneously. In addition, porous PVDF had higher cell growth compared with dense PVDF. Therefore, the hydrophobic PVDF with a porous structure was the best substrate for culturing acinar cells. According to our findings, a tubular PVDF scaffold with dense outer surface to prevent saliva leakage and with porous inner surface for the cell growth was proposed to serve as an artificial salivary gland for future use in the treatment of patients with salivary hypofunction.

Amylases↗

PubMed2005

Determination of surface charge properties of PC-12 cells by electrophoresis.

The electrophoretic behavior of pheochromocytoma (PC-12) cells was investigated both experimentally and theoretically. Cell mobility in aqueous media at different pHs and ionic concentrations was measured, and a model, which assumed that the cell surface contains both acidic and basic functional groups, was proposed. As a result, it was revealed that the experimental data gathered can be described satisfactorily by assuming that the cell surface contains two types of monovalent acidic functional groups and one basic functional group. The values of the dissociation constants of the acidic and basic groups are found to be close to those of acidic amino acids, which indicates that the acidic amino acids may play an important role in the surface electrical properties of PC-12 cells.

Animals↗

PubMed2005

Using a microfluidic device for 1 microl DNA microarray hybridization in 500 s.

This work describes a novel and simple modification of the current microarray format. It reduces the sample/reagent volume to 1 microl and the hybridization time to 500 s. Both 20mer and 80mer oligonucleotide probes and singly labeled 20mer and 80mer targets, representative of the T-cell acute lymphocytic leukemia 1 (TAL1) gene, have been used to elucidate the performance of this hybridization approach. In this format, called shuttle hybridization, a conventional flat glass DNA microarray is integrated with a PMMA microfluidic chip to reduce the sample and reagent consumption to 1/100 of that associated with the conventional format. A serpentine microtrench is designed and fabricated on a PMMA chip using a widely available CO2 laser scriber. The trench spacing is compatible with the inter-spot distance in standard microarrays. The microtrench chip and microarray chip are easily aligned and assembled manually so that the microarray is integrated with a microfluidic channel. Discrete sample plugs are employed in the microchannel for hybridization. Flowing through the microchannel with alternating depths and widths scrambles continuous sample plug into discrete short plugs. These plugs are shuttled back and forth along the channel, sweeping over microarray probes while re-circulation mixing occurs inside the plugs. Integrating the microarrays into the microfluidic channel reduces the DNA-DNA hybridization time from 18 h to 500 s. Additionally, the enhancement of DNA hybridization reaction by the microfluidic device is investigated by determining the coefficient of variation (CV), the growth rate of the hybridization signal and the ability to discriminate single-base mismatch. Detection limit of 19 amol was obtained for shuttle hybridization. A 1 mul target was used to hybridize with an array that can hold 5000 probes.

Basic Helix-Loop-Helix Proteins↗

PubMed2005

Polyethylene failure of the patellar component in New Jersey low-contact stress total knee arthroplasties.

In a postoperative 5- to 12-year follow-up study of 598 New Jersey low-contact stress total knee arthroplasties, 32 required revision. All retrieved patellar components were examined for polyethylene damage. These 32 cases had 3 types of failure: split rupture (7 cases), peripheral wear (21), and cantilevering breakage (4), respectively 75%, 64.3%, and 100% of which showed subluxation and/or tilting of the patellar component on the prerevision roentgenograms. Misalignment at the joint contact surfaces and rotational blockage of the mobile patellar component were considered the major causes of the failure. A design of a flatter metallic button (giving larger focal thickness of the polyethylene) and a dome-shaped polyethylene (reducing stress concentration at the pinnacle) may alleviate the failure driving mechanism should subluxation or tilting of the patellar component take place.

Arthroplasty, Replacement, Knee↗

PubMed2005

Formation of melanocyte spheroids on the chitosan-coated surface.

The search for biocompatible materials that can maintain function of melanocytes as the cellular patch is a feasible alternative for use in the autologous melanocyte transplantation for vitiligo. In this study, we demonstrated that the surface of chitosan-coated polystyrene wells supported the growth and phenotype expression of melanocytes. Depending on the seeding density and culture time, melanocytes were monolayered or spheroidal in morphology. At seeding densities above 10 x 10(3) cells/cm2, human melanocytes started to aggregate on the surface of chitosan after 2 days in culture. These aggregates grew into compact melanocyte spheroids on day 3 and more melanocyte spheroids were observed when a higher seeding density was used. Cells remained viable in the spheroids and grew into dendritic melanocytes when they were reinoculated on polystyrene wells. Conversely, the time for the formation of melanocyte spheroids needed a longer period at lower seeding density. For example, melanocytes at as low as 1.25 x 10(3) cells/cm2 did not aggregate until the 20th day of culture. In order to interpret the phenomenon further, we proposed the formation of melanocyte spheroids on the chitosan is mediated by a balance between two competing forces: the interactions of cell-chitosan and cell-cell.

Cell Adhesion↗

PubMed2005

Behavior of embryonic rat cerebral cortical stem cells on the PVA and EVAL substrates.

Cell behavior is determined by intrinsic programs and complex interactions among cells, medium components and substrates. Several previous reports have demonstrated the usefulness of extrinsic signals coming from soluble growth factors and cell-cell contact for regulating the proliferation and differentiation of neural stem cells. At present, the effects of substrate on neural stem cells are not known. In this study, the behavior of neural stem cells, isolated from embryonic rat cerebral cortex, was observed and compared on the polyvinyl alcohol (PVA) and poly (ethylene-co-vinyl alcohol) (EVAL) substrates in the presence of the mitogenic effect of basic fibroblast growth factor (bFGF) in the serum-free medium. It was found that PVA and EVAL exerted different influences on the fate of neural stem cells. The behavior of neural stem cells on the EVAL was independent of cell density at the single-cell level. Single neural stem cells seemed to remain dormant on the EVAL. Conversely, the development of cell clusters, termed neurospheres, was in a density-dependent manner on the EVAL. Neurospheres continuously proliferated under high-density culture condition, but differentiated into neurons and astrocytes under low-density culture condition. However, regardless of single cells or neurospheres, cultured cells could not survive on the PVA. Therefore, it is reasonable to assume that biomaterials may stimulate or inhibit the proliferation and differentiation of neural stem cells. These in vitro results are very encouraging since this information should be useful for the development of strategies for regulating the preservation, proliferation and differentiation of neural stem cells.

Animals↗

PubMed2004

Preparation of PLLA membranes with different morphologies for culture of MG-63 Cells.

In this work, poly L-lactide (PLLA) membranes with different morphologies were prepared and the equilibrium phase diagram of membrane formation system of ethanol, methylene chloride, and PLLA was studied. Based on the phase diagram, particulate and porous membranes, dominated by crystallization and liquid-liquid demixing, respectively, could be prepared by changing the PLLA concentration of casting solution. In addition, in vitro interaction of MG-63 osteosarcoma cells and PLLA membranes with dense, porous and particulate morphologies was investigated. It was found that the particulate membrane not only could improve cell adhesion and growth, but also could upregulate the osteoblastic phenotype. Therefore, the PLLA membrane with particulate morphology satisfies the biomaterial requirement necessary for temporary scaffold to transplanted osteoblasts and provides a means for the architectural design of more complex tissue-engineered systems.

Adolescent↗