Search PubMed⌕ Search

Biomedical subjects

T T Teeri

Publications and source records attributed to T T Teeri.

At least 37 records · Page 2Linked to original sources
PubMed1996

Activity studies and crystal structures of catalytically deficient mutants of cellobiohydrolase I from Trichoderma reesei.

The roles of the residues in the catalytic trio Glu212-Asp214-Glu217 in cellobiohydrolase I (CBHI) from Trichoderma reesei have been investigated by changing these residues to their isosteric amide counterparts. Three mutants, E212Q, D214N and E217Q, were constructed and expressed in T. reesei. All three point mutations significantly impair the catalytic activity of the enzyme, although all retain some residual activity. On the small chromophoric substrate CNP-Lac, the kcat values were reduced to 1/2000, 1/85 and 1/370 of the wild-type activity, respectively, whereas the KM values remained essentially unchanged. On insoluble crystalline cellulose, BMCC, no significant activity was detected for the E212Q and E217Q mutants, whereas the D214N mutant retained residual activity. The consequences of the individual mutations on the active-site structure were assessed for two of the mutants, E212Q and D214N, by X-ray crystallography at 2.0 A and 2.2 A resolution, respectively. In addition, the structure of E212Q CBHI in complex with the natural product, cellobiose, was determined at 2.0 A resolution. The active-site structure of each mutant is very similar to that of the wild-type enzyme. In the absence of ligand, the active site of the D214N mutant contains a calcium ion firmly bound to Glu212, whereas that of E212Q does not. This supports our hypothesis that Glu212 is the charged species during catalysis. As in the complex of wild-type CBHI with bound o-iodobenzyl-1-thio-beta-D-glucoside, cellobiose is bound to the two product sites in the complex with E212Q. However, the binding of cellobiose differs from that of the glucoside in that the cellobiose is shifted away from the trio of catalytic residues to interact more intimately with a loop that is part of the outer wall of the active site.

Binding Sites↗
PubMed1996

The cellulose-binding domain of the major cellobiohydrolase of Trichoderma reesei exhibits true reversibility and a high exchange rate on crystalline cellulose.

Cellulose-binding domains (CBDs) bind specifically to cellulose, and form distinct domains of most cellulose degrading enzymes. The CBD-mediated binding of the enzyme has a fundamental role in the hydrolysis of the solid cellulose substrate. In this work we have investigated the reversibility and kinetics of the binding of the CBD from Trichoderma reesei cellobiohydrolase I on microcrystalline cellulose. The CBD was produced in Escherichia coli, purified, and radioactively labeled by reductive alkylation with 3H. Sensitive detection of the labeled CBD allowed more detailed analysis of its behavior than has been possible before, and important novel features were resolved. Binding of the CBD was found to be temperature sensitive, with an increased affinity at lower temperatures. The interaction of the CBD with cellulose was shown to be fully reversible and the CBD could be eluted from cellulose by simple dilution. The rate of exchange measured for the CBD-cellulose interaction compares well with the hydrolysis rate of cellobiohydrolase I, which is consistent with its proposed mode of action as a processive exoglucanase.

Amino Acid Sequence↗
PubMed1996

Cello-oligosaccharide hydrolysis by cellobiohydrolase II from Trichoderma reesei. Association and rate constants derived from an analysis of progress curves.

The hydrolysis of soluble cello-oligosaccharides, with a degree of polymerisation of 4-6, catalysed by cellobiohydrolase II from Trichoderma reesei was studied using 1H-NMR spectroscopy and HPLC. The experimental progress curves were analysed by fitting numerically integrated kinetic equations, which provided cleavage patterns and kinetic constants for each oligosaccharide. This analysis procedure accounts for product inhibition and avoids the initial slope approximation. No glucose was detected at the beginning of the reaction indicating that only the internal glycosidic linkages are attacked. For cellotetraose only the second glycosidic linkage was cleaved. For cellopentaose and cellohexaose the second and the third glycosidic linkage from the non-reducing end were cleaved with approximately equal probability. The degradation rates of these cello-oligosaccharides, 1-12 s-1 at 27 degrees C, are about 10-100 times faster than for the 4-methylumbelliferyl substituted analogs or for collotriose. No intermediate products larger than cellotriose were released. The degradation rate for cellotetraose were higher than its off-rate, which accounts for the processive degradation of cellohexaose. A high cellohexaose/enzyme ratio caused slow reversible inactivation of the enzyme.

Binding Sites↗
PubMed1996

Characterization of a double cellulose-binding domain. Synergistic high affinity binding to crystalline cellulose.

Most cellulose-degrading enzymes have a two-domain structure that consists of a catalytic and a cellulose-binding domain (CBD) connected by a linker region. The linkage and the interactions of the two domains represent one of the key questions for the understanding of the function of these enzymes. The CBDs of fungal cellulases are small peptides folding into a rigid, disulfide-stabilized structure that has a distinct cellulose binding face. Here we describe properties of a recombinant double CBD, constructed by fusing the CBDs of two Trichoderma reesei cellobiohydrolases via a linker peptide similar to the natural cellulase linkers. After expression in Escherichia coli, the protein was purified from the culture medium by reversed phase chromatography and the individual domains obtained by trypsin digestion. Binding of the double CBD and its single CBD components was investigated on different types of cellulose substrates as well as chitin. Under saturating conditions, nearly 20 micromol/g of the double CBD was bound onto microcrystalline cellulose. The double CBD exhibited much higher affinity on cellulose than either of the single CBDs, indicating an interplay between the two components. A two-step model is proposed to explain the binding behavior of the double CBD. A similar interplay between the domains in the native enzyme is suggested for its binding to cellulase.

Amino Acid Sequence↗
PubMed1996

The active site of Trichoderma reesei cellobiohydrolase II: the role of tyrosine 169.

Trichoderma reesei cellobiohydrolase II (CBHII) is an exoglucanase cleaving primarily cellobiose units from the non-reducing end of cellulose chains. The beta-1,4 glycosidic bond is cleaved by acid catalysis with an aspartic acid, D221, as the likely proton donor, and another aspartate, D175, probably ensuring its protonation and stabilizing charged reaction intermediates. The catalytic base has not yet been identified experimentally. The refined crystal structure of CBHII also shows a tyrosine residue, Y169, located close enough to the scissile bond to be involved in catalysis. The role of this residue has been studied by introducing a mutation Y169F, and analysing the kinetic and binding behavior of the mutated CBHII. The crystal structure of the mutated enzyme was determined to 2.0 A resolution showing no changes when compared with the structure of native CBHII. However, the association constants of the mutant enzyme for cellobiose and cellotriose are increased threefold and for 4-methylumbelliferyl cellobioside over 50-fold. The catalytic constants towards cellotriose and cellotetraose are four times lower for the mutant. These data suggest that Y169, on interacting with a glucose ring entering the second subsite in a narrow tunnel, helps to distort the glucose ring into a more reactive conformation. In addition, a change in the pH activity profile was observed. This indicates that Y169 may have a second role in the catalysis, namely to affect the protonation state of the active site carboxylates, D175 and D221.

Binding Sites↗
PubMed1996

The Cellulases Endoglucanase I and Cellobiohydrolase II of Trichoderma reesei Act Synergistically To Solubilize Native Cotton Cellulose but Not To Decrease Its Molecular Size.

Degradation of cotton cellulose by Trichoderma reesei endoglucanase I (EGI) and cellobiohydrolase II (CBHII) was investigated by analyzing the insoluble cellulose fragments remaining after enzymatic hydrolysis. Changes in the molecular-size distribution of cellulose after attack by EGI, alone and in combination with CBHII, were determined by size exclusion chromatography of the tricarbanilate derivatives. Cotton cellulose incubated with EGI exhibited a single major peak, which with time shifted to progressively lower degrees of polymerization (DP; number of glucosyl residues per cellulose chain). In the later stages of degradation (8 days), this peak was eventually centered over a DP of 200 to 300 and was accompanied by a second peak (DP, (apprx=)15); a final weight loss of 34% was observed. Although CBHII solubilized approximately 40% of bacterial microcrystalline cellulose, the cellobiohydrolase did not depolymerize or significantly hydrolyze native cotton cellulose. Furthermore, molecular-size distributions of cellulose incubated with EGI together with CBHII did not differ from those attacked solely by EGI. However, a synergistic effect was observed in the reducing-sugar production by the cellulase mixture. From these results we conclude that EGI of T. reesei degrades cotton cellulose by selectively cleaving through the microfibrils at the amorphous sites, whereas CBHII releases soluble sugars from the EGI-degraded cotton cellulose and from the more crystalline bacterial microcrystalline cellulose.

Journal Article↗
PubMed1996

Immunoaffinity chromatographic purification of cellobiohydrolase II mutants from recombinant trichoderma reesei strains devoid of major endoglucanase genes.

Efficient purification of Trichoderma reesei cellobiohydrolase II (CBHII) requires the use of affinity chromatography based on a substrate analogue. Due to altered substrate binding, the purification of many active-site mutants of CBHII from the complex fungal culture media represents a considerable challenge. Here we describe a combination of two approaches to facilitate the purification: the first is based on the construction of novel engineered T. reesei strains devoid of the major contaminating endoglucanases, and the second uses immunoaffinity chromatography as the final purification step. Two different procedures for the preparation of the antibody matrix were tested. Crosslinking of the monoclonal antibody to Protein G matrix instead of the conventional immobilization via cyanogen bromide increased the binding efficiency. Three different active-site mutants of CBHII bound to the immunoaffinity column in neutral pH and were eluted in pH 2.7. The purity of the CBHII mutant preparations was tested using small chromophoric substrates and hydroxyethyl cellulose, which are hydrolyzed by many other cellulases but not by CBHII. The immunoaffinity column purified the CBHII mutants over 800-fold in a single step and resulted in homogeneous protein preparations free of proteolytically cleaved forms of CBHII. The use of the double replacement T. reesei production strains, especially the one lacking the genes coding for both the endogeneous CBHII and the endoglucanase II (EGII), helped to reduce the total endoglucanase activity in the preparations.

Binding Sites↗
PubMed1995

The difference in affinity between two fungal cellulose-binding domains is dominated by a single amino acid substitution.

Cellulose-binding domains (CBDs) form distinct functional units of most cellulolytic enzymes. We have compared the cellulose-binding affinities of the CBDs of cellobiohydrolase I (CBHI) and endoglucanase I (EGI) from the fungus Trichoderma reesei. The CBD of EGI had significantly higher affinity than that of CBHI. Four variants of the CBHI CBD were made in order to identify the residues responsible for the increased affinity in EGI. Most of the difference could be ascribed to a replacement of a tyrosine by a tryptophan on the flat cellulose-binding face.

Adsorption↗
PubMed1995

Progress-curve analysis shows that glucose inhibits the cellotriose hydrolysis catalysed by cellobiohydrolase II from Trichoderma reesei.

NMR spectroscopy and HPLC were used to investigate the hydrolysis of cellotriose by cellobiohydrolase II from Trichoderma reesei. Substrate and product concentrations were followed as a function of time. Progress curves were calculated by forward numerical integration of the full kinetic equations and were fitted to the experimental data. Binding and rate constants were obtained from this fit, whereby no initial slope or Michaelis-Menten approximation was used. The progress curves from a single experiment sufficed to produce agreement with the Michaelis-Menten model (eight experiments). The absence of a kinetic isotope effect was proven. The progress-curve analysis showed that a simple degradation model cannot describe the experimental time-courses at substrate concentrations greater than 1 mM. A model containing competitive inhibition from cellobiose as well as non-competitive inhibition from glucose was developed. This four-parameter model accurately reproduces about 1000 experimental data points covering five orders of magnitude in oligosaccharide concentrations. Glucose binding to the enzyme/cellotriose complex retards, in a non-competitive fashion, cellotriose hydrolysis by at least a factor of 30. A structural model for the non-competitive inhibition is discussed. The NMR experiment also produced individual progress curves for the alpha and beta anomers. The beta anomer of cellotriose was degraded 2.5-times faster than the alpha anomer.

Catalysis↗
PubMed1995

Effects of pH and high ionic strength on the adsorption and activity of native and mutated cellobiohydrolase I from Trichoderma reesei.

Cellobiohydrolase I (CBHI) is the major cellulase of Trichoderma reesei. The enzyme contains a discrete cellulose-binding domain (CBD), which increases its binding and activity on crystalline cellulose. We studied cellulase-cellulose interactions using site-directed mutagenesis on the basis of the three-dimensional structure of the CBD of CBHI. Three mutant proteins which have earlier been produced in Saccharomyces cerevisiae were expressed in the native host organism. The data presented here support the hypothesis that a conserved tyrosine (Y492) located on the flat and more hydrophilic surface of the CBD is essential for the functionality. The data also suggest that the more hydrophobic surface is not directly involved in the CBD function. The pH dependence of the adsorption revealed that electrostatic repulsion between the bound proteins may also control the adsorption. The binding of CBHI to cellulose was significantly affected by high ionic strength suggesting that the interaction with cellulose includes a hydrophobic effect. High ionic strength increased the activity of the isolated core and of mutant proteins on crystalline cellulose, indicating that once productively bound, the enzymes are capable of solubilizing cellulose even with a mutagenized or with no CBD.

Adsorption↗
PubMed1995

Introduction of lysine residues on the light chain constant domain improves the labelling properties of a recombinant Fab fragment.

Europium chelates provide a non-radioactive alternative for sensitive labelling of antibodies for diagnostic immunoassays. Lysine residues at antibody surfaces are ready targets for labelling by an isothiocyanate derivative of the europium chelate (Eu3+). Here the labelling efficiency of a recombinant anti-human alpha-fetoprotein (hAFP) Fab fragment has been improved by increasing its lysine content by protein engineering. Molecular modelling was used to identify three light chain constant domain surface arginine residues, R154, R187 and R210, which were mutated to lysine residues. The mutations did not influence the affinity of the lysine-enriched Fab fragment and its labelling efficiency was found to be approximately 40% higher than that of the wild-type Fab fragment. With low degree of labelling, the affinities of the two Fab fragments were identical and comparable with that of the original monoclonal anti-hAFP IgG. With a higher degree of labelling the affinities of both Fab fragments decreased more than that of the intact IgG since more lysine residues are available for labelling in the additional heavy chain constant domains of the larger molecule. Electrostatic adsorption and covalent immobilization of the Fab fragments were characterized by BIAcore and the lysine-enriched Fab fragment was found to be more efficiently immobilized to an activated carboxymethyl surface.

Amino Acid Sequence↗
PubMed1995

Molecular dynamics simulation of fungal cellulose-binding domains: differences in molecular rigidity but a preserved cellulose binding surface.

A total of 23 fungal cellulose-binding domain (CBD) sequences were aligned. Structural models of the cellulose-binding domain of an exoglucanase (CBHII) and of three endoglucanases (EGI, EGII and EGV) from Trichoderma reesei cellulases were homology modelled based on the NMR structure of the fungal cellobiohydrolase CBHI, from the same organism. The completed models and the known structure of the CBHI cellulose-binding domain were refined by molecular dynamics simulations in water. All four models were found to be very similar to the structure of the CBHI cellulose-binding domain and sequence comparison indicated that in general the three-dimensional structures of fungal cellulose-binding domains are very similar. In all the CBDs studied, two disulphide bridges apparently stabilize the polypeptide fold. From the models, and additional disulphide bridge was predicted in EGI and CBHII, and in eight further CBDs from other organisms. Three highly conserved aromatic residues on the hydrophilic side of the wedge make this surface flat. This surface is expected to make contact with the substrate. Three invariant amino acids, Gln7, Asn29 and Gln34, on this flat face are in suitable positions for hydrogen bonding with the cellulose surface. Analysis of the differences in the protein surface properties indicated that the endoglucanases tend to be more hydrophilic than the exoglucanases. The largest structural variation was found around positions 12-16. The fungal CBD sequences are discussed in relation to variations in function and pH dependence. Comparison of the modelled structures with experimental binding data for the CBHI and EGI allowed the formulation of a qualitative relationship to cellulose affinity.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗
PubMed1995

Properties of a single-chain antibody containing different linker peptides.

Single-chain antibodies were constructed using six different linker peptides to join the VH and VL domains of an anti-2-phenyloxazolone (Ox) antibody. Four of the linker peptides originated from the interdomain linker region of the fungal cellulase CBHI and consisted of 28, 11, six and two amino acid residues. The two other linker peptides used were the (GGGGS)3 linker with 15 amino acid residues and a modified IgG2b hinge peptide with 22 residues. Proteolytic stability and Ox binding properties of the six different scFv derivatives produced in Escherichia coli were investigated and compared with those of the corresponding Fv fragment containing no joining peptide between the V domains. The hapten binding properties of different antibody fragments were studied by ELISA and BIAcoreTM. The interdomain linker peptide improved the hapten binding properties of the antibody fragment when compared with Fv fragment, but slightly increased its susceptibility to proteases. Single-chain antibodies with short CBHI linkers of 11, six and two residues had a tendency to form multimers which led to a higher apparent affinity. The fragments with linkers longer than 11 residues remained monomeric.

Amino Acid Sequence↗
PubMed1994

The three-dimensional crystal structure of the catalytic core of cellobiohydrolase I from Trichoderma reesei.

Cellulose is the major polysaccharide of plants where it plays a predominantly structural role. A variety of highly specialized microorganisms have evolved to produce enzymes that either synergistically or in complexes can carry out the complete hydrolysis of cellulose. The structure of the major cellobiohydrolase, CBHI, of the potent cellulolytic fungus Trichoderma reesei has been determined and refined to 1.8 angstrom resolution. The molecule contains a 40 angstrom long active site tunnel that may account for many of the previously poorly understood macroscopic properties of the enzyme and its interaction with solid cellulose. The active site residues were identified by solving the structure of the enzyme complexed with an oligosaccharide, o-iodobenzyl-1-thio-beta-cellobioside. The three-dimensional structure is very similar to a family of bacterial beta-glucanases with the main-chain topology of the plant legume lectins.

Binding Sites↗
PubMed1993

Role of the interdomain linker peptide of Trichoderma reesei cellobiohydrolase I in its interaction with crystalline cellulose.

Cellobiohydrolase I (CBH I), the major component of Trichoderma reesei cellulolytic system, is comprised of a catalytic core domain joined to a cellulose binding-domain (CBD) by an extended O-glycosylated interdomain linker peptide. Two internal deletions were introduced to the linker in order to investigate its function particularly in the hydrolysis of crystalline cellulose. Deletion of the first one-third of the linker, including a putative hinge region, reduces the binding capacity of CBH I in high enzyme coverage but does not affect its enzymatic activity on crystalline cellulose. The longer deletion removing practically all of the linker dramatically reduces the rate of crystalline cellulose degradation even though the enzyme still binds to the substrate. We conclude that sufficient spatial separation of the two domains is required for efficient function of CBH I. It is evident that the presence of a functional CBD is increasingly important for CBH I toward higher enzyme to cellulose ratios. Our data suggest that the putative hinge removed by the first deletion facilitates CBD-driven binding and dense packing of the wild type enzyme on the cellulose surface.

Adsorption↗
PubMed1993

Efficient secretion of murine Fab fragments by Escherichia coli is determined by the first constant domain of the heavy chain.

Fab fragments of IgG1 and IgG3 subclass antibodies which bind to 2-phenyloxazolone (Ox) were produced in Escherichia coli. The signal sequences of the Fd and L chains were correctly processed, the fragments were secreted into the periplasmic space and released into the culture medium upon prolonged cultivations. The yields of active Ox IgG1 and Ox IgG3 Fab fragments after one-step purification from the culture medium by affinity chromatography were 2 micrograms/ml and 0.5 micrograms/ml, respectively. The majority of the purified Ox IgG1 Fab was properly assembled, but in the case of Ox IgG3, the preparation was found to consist of a complete L chain and C-terminally degraded fragments of the Fd chain. A deletion up to the interchain disulfide bond in the first constant domain (CH1) of the Ox IgG3 Fd chain led to proper assembly of the truncated Fab fragment. The production level of the truncated fragment was comparable to that of the Ox IgG1 Fab and its hapten-binding activity similar to that of the idiotype monoclonal antibody. The temperature stability of the Ox IgG1 Fab was similar to that of the intact antibody. However, both of the Ox IgG3 Fab fragments showed reduced stability, suggesting that the CH1 domain contributes significantly to the thermal stability of the Fab fragment.

Animals↗
PubMed1993

Lipid-tagged antibodies: bacterial expression and characterization of a lipoprotein-single-chain antibody fusion protein.

In order to achieve a stable and functional immobilization of antibodies, we investigated the possibility of adding hydrophobic membrane anchors to antibody fragments expressed in Escherichia coli. The DNA sequence encoding the signal peptide and the nine N-terminal amino acid residues of the major lipoprotein of E.coli was fused to the sequence of an anti-2-phenyloxazolone single-chain Fv antibody fragment [Takkinen et al. (1991) Protein Engng, 4,837-841]. The expression of the fusion construct in E.coli resulted in specific accumulation of an immunoreactive 28 kDa polypeptide. Unlike the unmodified single-chain Fv fragment, the fusion protein was cell-associated, labelled by [3H]palmitate which is indicative of the presence of N-terminal lipid modification, partitioned into the detergent phase upon Triton X-114 phase separation and was localized predominantly in the bacterial outer membrane. The fusion antibody displayed specific 2-phenyloxazolone-binding activity in the membrane-bound form and after solubilization with non-ionic detergents. Furthermore, upon removal of detergent the fusion antibody was incorporated into proteoliposomes which displayed specific hapten-binding activity. Our results show that antibodies can be converted to membrane-bound proteins with retention of antigen-binding properties by introduction of lipid anchors during biosynthesis. This approach may prove useful in the design of immunoliposomes and immunosensors.

Amino Acid Sequence↗