Search PubMed⌕ Search

Biomedical subjects

T T Manson

Publications and source records attributed to T T Manson.

8 recordsLinked to original sources

A method for measuring joint kinematics designed for accurate registration of kinematic data to models constructed from CT data.

A method for measuring three-dimensional kinematics that incorporates the direct cross-registration of experimental kinematics with anatomic geometry from Computed Tomography (CT) data has been developed. Plexiglas registration blocks were attached to the bones of interest and the specimen was CT scanned. Computer models of the bone surface were developed from the CT image data. Determination of discrete kinematics was accomplished by digitizing three pre-selected contiguous surfaces of each registration block using a three-dimensional point digitization system. Cross-registration of bone surface models from the CT data was accomplished by identifying the registration block surfaces within the CT images. Kinematics measured during a biomechanical experiment were applied to the computer models of the bone surface. The overall accuracy of the method was shown to be at or below the accuracy of the digitization system used. For this experimental application, the accuracy was better than +/-0.1mm for position and 0.1 degrees for orientation for linkage digitization and better than +/-0.2mm and +/-0.2 degrees for CT digitization. Surface models of the radius and ulna were constructed from CT data, as an example application. Kinematics of the bones were measured for simulated forearm rotation. Screw-displacement axis analysis showed 0.1mm (proximal) translation of the radius (with respect to the ulna) from supination to neutral (85.2 degrees rotation) and 1.4mm (proximal) translation from neutral to pronation (65.3 degrees rotation). The motion of the radius with respect to the ulna was displayed using the surface models. This methodology is a useful tool for the measurement and application of rigid-body kinematics to computer models.

Arthrography↗

Forearm rotation alters interosseous ligament strain distribution.

Recent interest in reconstruction of the interosseous ligament (IOL) of the forearm has led to questions concerning optimal placement of the reconstructive graft as well as the ideal rotational position of the forearm during graft tensioning. We therefore studied the strain distribution in the IOL to determine which fibers are strained in different positions of forearm rotation. Five cadaveric human forearms were subjected to compressive axial load (simulating power grip) and the strain values across the entire IOL were measured with the forearm in neutral, supination, and pronation. The strain distribution in the IOL changed with forearm rotation. The highest overall strain was found in neutral. In neutral and pronation, higher strain was observed in the proximal region of the IOL. In supination, however, higher average strain was seen in the distal region of the IOL. These results suggest that a reconstructive graft placed in the proximal region of the IOL and tensioned in neutral rotation would provide balanced constraint in different positions of forearm rotation. A graft placed in the distal region and tensioned in forearm neutral, however, may limit forearm rotation.

Adolescent↗

Role of the forearm interosseous ligament: is it more than just longitudinal load transfer?

The objective of our study was to measure 3-dimensional force vectors (magnitude and direction) acting in the forearm when load is applied to the hand and to measure the actual force in the interosseous ligament (IOL). Fourteen cadaveric forearms were loaded to 136 N of compression while special load cells measured force vectors in the forearm. Computer forearm models were used to display the 3-dimensional force vector directions. The study results showed that the radius bears most of the load at the wrist but load on the radius at the elbow is reduced because the IOL transfers load to the ulna between the wrist and the elbow. In addition to this role in longitudinal load transfer, our measurement of 3-dimensional forces allowed identification of transverse vectors which suggest that the IOL also functions to keep the radius and ulna from splaying apart. Our results imply that the IOL participates not only in longitudinal load transfer but also in the maintenance of transverse stability of the forearm during compressive load transfer from the hand to the elbow.

Aged↗

A new methodology to measure load transfer through the forearm using multiple universal force sensors.

Previous approaches to measuring forces in the forearm have made the assumption that forces acting in the radius and ulna are uniaxial near the wrist and elbow. To accurately describe forces in the forearm and the forces in the interosseous ligament, we have developed a new methodology to quantitatively determine the 3-D force vectors acting in forearm structures when a compressive load is applied to the hand. A materials testing machine equipped with a six degree-of-freedom universal force-moment sensor (UFS) was employed to apply a uniaxial compressive force to cadaveric forearms gripped at the hand and humerus. Miniature UFSs were implanted into the distal radius and proximal ulna to measure force vectors there. A 3-D digitizing device was used to measure transformations between UFS coordinate systems, utilized for calculating the force vectors in the distal ulna, proximal radius, and the interosseous ligament (IOL). This method was found to be repeatable to within 3 N, and accurate to within 2 N for force magnitudes. Computer models of the forearm, generated from CT scans, were used to visualize the force vectors in 3-D. Application of this methodology to eight forearm specimens showed that the radius carries most of the load at the wrist while force in the IOL relieves load acting in the radius at the mid-forearm. For a 136 N applied hand force, the force in the IOL was 36 + 21 N. Advantages of this methodology include the determination of 3-D force vectors, especially those in the IOL, as well as computer generated 3-D visualization of results.

Biomechanical Phenomena↗

Biomechanics of surgical glove expansion.

The purpose of this study was to correlate the latex gloves' susceptibility to hydration to its development of glove expansion or irreversible elongation of the latex glove. During hydration, the Micro-Touch glove exhibited significantly more creep strain than did the Biogel gloves. Similarly, the Micro-Touch glove exhibited glove growth, while the Biogel glove maintained a uniform fit during hydration.

Biomechanical Phenomena↗

A new glove puncture detection system.

A new glove detection system has been developed for early and accurate detection of a hole in the glove. It consists of an inner glove colored by a green dye and outer glove. When a breach in the outer glove occurs, the inner glove develops a dark patch around the needle puncture hole, a visible indicator for immediate glove change. Using a computerized needle penetration system, the immediate and maximal penetration forces as well as the work required for needle penetration of this new double glove was significantly greater than those encountered with either the inner or outer glove tested separately. In addition to hole detection, this double glove provides increased protection against needle penetration.

Coloring Agents↗