Search PubMed⌕ Search

Biomedical subjects

T Palzkill

Publications and source records attributed to T Palzkill.

At least 19 recordsLinked to original sources
PubMed1999

Identification of residues in beta-lactamase critical for binding beta-lactamase inhibitory protein.

beta-Lactamase inhibitory protein (BLIP) is a potent inhibitor of several beta-lactamases including TEM-1 beta-lactamase (Ki = 0.1 nM). The co-crystal structure of TEM-1 beta-lactamase and BLIP has been solved, revealing the contact residues involved in the interface between the enzyme and inhibitor. To determine which residues in TEM-1 beta-lactamase are critical for binding BLIP, the method of monovalent phage display was employed. Random mutants of TEM-1 beta-lactamase in the 99-114 loop-helix and 235-240 B3 beta-strand regions were displayed as fusion proteins on the surface of the M13 bacteriophage. Functional mutants were selected based on the ability to bind BLIP. After three rounds of enrichment, the sequences of a collection of functional beta-lactamase mutants revealed a consensus sequence for the binding of BLIP. Seven loop-helix residues including Asp-101, Leu-102, Val-103, Ser-106, Pro-107, Thr-109, and His-112 and three B3 beta-strand residues including Ser-235, Gly-236, and Gly-238 were found to be critical for tight binding of BLIP. In addition, the selected beta-lactamase mutants A113L/T114R and E240K were found to increase binding of BLIP by over 6- and 11-fold, respectively. Combining these substitutions resulted in 550-fold tighter binding between the enzyme and BLIP with a Ki of 0.40 pM. These results reveal that the binding between TEM-1 beta-lactamase and BLIP can be improved and that there are a large number of sequences consistent with tight binding between BLIP and beta-lactamase.

Amino Acid Sequence↗
PubMed1999

Contributions of aspartate 49 and phenylalanine 142 residues of a tight binding inhibitory protein of beta-lactamases.

beta-Lactamases are bacterial enzymes that hydrolyze beta-lactam antibiotics to render them inactive. The beta-lactamase inhibitor protein (BLIP) of Streptomyces clavuligerus, is a potent inhibitor of several beta-lactamases, including the TEM-1 enzyme (Ki = 0.6 nM). Evidence from the TEM-1/BLIP co-crystal suggests that two BLIP residues, Asp-49 and Phe-142, mimic interactions made by penicillin G when bound in the active site of TEM-1. To determine the importance of these two residues, a heterologous expression system for BLIP was established in Escherichia coli. Site-directed mutagenesis was used to change Asp-49 and Phe-142 to alanine, and inhibition constants (Ki) for both mutants were determined. Each mutation increases the Ki for BLIP inhibition of TEM-1 beta-lactamase approximately 100-fold. To address how these two positions effect the specificity of beta-lactamase binding, Ki values were determined for the interaction of wild-type BLIP, as well as the D49A and F142A mutants, with two extended spectrum beta-lactamases (the G238S and the E104K TEM variants). Positions 104 and 238 are located in the BLIP/beta-lactamase interface. Interestingly, the three BLIP proteins inhibited the G238S beta-lactamase mutant to the same degree that they inhibited TEM-1. However, wild-type BLIP has a higher Ki for the E104K beta-lactamase mutant, suggesting that interactions between BLIP and beta-lactamase residue Glu-104 are important for wild-type levels of BLIP inhibition.

Aspartic Acid↗
PubMed1998

Mapping protein-ligand interactions using whole genome phage display libraries.

The function of many genes cannot be deduced from sequence similarity, and biochemical methods are usually required. Whole genome sequences can be thought of as not only a set of genes but also collections of functional domains. These domains can be studied by affinity methods whereby identification of the ligand can provide information on biochemical function. To take advantage of this method, one must express all functional domains in a form suitable for affinity studies. Phage display technology provides a means for accomplishing this. The pJuFo phage display system, based on the interaction between the leucine zippers Jun and Fos, has been modified and used to create a genomic phage display library from Escherichia coli MG1655. The system has been tested by using the library to map the dominant binding epitopes for an anti-RecA protein polyclonal antibody sera. This methodology provides a general biochemical approach to functional analysis of protein-ligand interactions on a genomewide basis.

Antibodies, Monoclonal↗
PubMed1998

The role of residue 238 of TEM-1 beta-lactamase in the hydrolysis of extended-spectrum antibiotics.

beta-Lactamases inactivate beta-lactam antibiotics by catalyzing the hydrolysis of the amide bond in the beta-lactam ring. The plasmid-encoded class A TEM-1 beta-lactamase is a commonly encountered beta-lactamase. It is able to inactivate penicillins and cephalosporins but not extended-spectrum antibiotics. However, TEM-1-derived natural variants containing the G238S amino acid substitution display increased hydrolysis of extended-spectrum antibiotics. Two models have been proposed to explain the role of the G238S substitution in hydrolysis of extended-spectrum antibiotics. The first proposes a direct hydrogen bond of the Ser238 side chain to the oxime group of extended-spectrum antibiotics. The second proposes that steric conflict with surrounding residues, due to increased side chain volume, leads to a more accessible active site pocket. To assess the validity of each model, TEM-1 mutants with amino acids substitutions of Ala, Ser, Cys, Thr, Asn, and Val have been constructed. Kinetic analysis of these enzymes with penicillins and cephalosporins suggests that a hydrogen bond is necessary but not sufficient to achieve the hydrolytic activity of the G238S enzyme for the extended-spectrum antibiotics cefotaxime and ceftazidime. In addition, it appears that the new hydrogen bond interaction is to a site on the enzyme rather than directly to the extended-spectrum antibiotic. The data indicate that, for the G238S substitution, a combination of an optimal side chain volume and hydrogen bonding potential results in the most versatile and advantageous antibiotic hydrolytic spectrum for bacterial resistance to extended-spectrum antibiotics.

Anti-Bacterial Agents↗
PubMed1998

beta-Lactamases: protein evolution in real time.

The evolution and spread of bacteria resistant to beta-lactam antibiotics has progressed at an alarming rate. Bacteria may acquire resistance to a given drug by mutation of pre-existing genes or by the acquisition of new genes from other bacteria. One ongoing example of these mechanisms is the evolution of new variants of the TEM and SHV beta-lactamases with altered substrate specificity.

Catalysis↗
PubMed1998

Roles of amino acids 161 to 179 in the PSE-4 omega loop in substrate specificity and in resistance to ceftazidime.

The PSE-4 enzyme is a prototype carbenicillin-hydrolyzing enzyme exhibiting high activity against penicillins and early cephalosporins. To understand the mechanism that modulates substrate profiles and to verify the ability of PSE-4 to extend its substrate specificity toward expanded-spectrum cephalosporins, we used random replacement mutagenesis to generate six random libraries from amino acids 162 to 179 in the Omega loop. This region is known from studies with TEM-1 to be implicated in substrate specificity. It was found that the mechanism modulating ceftazidime hydrolysis in PSE-4 was different from that in TEM-1. The specificity of class 2c carbenicillin-hydrolyzing enzymes could not be assigned to the Omega loop of PSE-4. Analysis of the percentage of functional enzymes revealed that the hydrolysis of ampicillin was more affected than hydrolysis of carbenicillin by amino acid substitutions at positions 162 to 164 and 165 to 167.

Amino Acid Sequence↗
PubMed1998

Display of functional beta-lactamase inhibitory protein on the surface of M13 bacteriophage.

The display of proteins on the surface of filamentous phage has been shown to be a powerful method to select variants of a protein with altered binding properties from large combinatorial libraries of mutants. The beta-lactamase inhibitory protein (BLIP) is a 165-amino-acid protein that binds and inhibits TEM-1 beta-lactamase-catalyzed hydrolysis of the penicillin and cephalosporin antibiotics. Here we describe the construction of a new phagemid vector and the use of this vector to display BLIP on the surface of filamentous phage. It is shown that BLIP-displaying phage bind to immobilized beta-lactamase and that the binding can be competed off by the addition of soluble beta-lactamase. In addition, a two-step phage enzyme-linked immunosorbent assay procedure was used to demonstrate that the BLIP-displaying phage bind beta-lactamase with a 50% inhibitory concentration of 1 nM, which compares favorably with a previously published Ki of 0.6 nM. A system has therefore been established for protein engineering of BLIP to expand its range of binding to other beta-lactamases and penicillin-binding proteins.

Amino Acid Sequence↗
PubMed1998

Characterization of a PSE-4 mutant with different properties in relation to penicillanic acid sulfones: importance of residues 216 to 218 in class A beta-lactamases.

Class A beta-lactamases are inactivated by the suicide inactivators sulbactam, clavulanic acid, and tazobactam. An examination of multiple alignments indicated that amino acids 216 to 218 differed among class A enzymes. By random replacement mutagenesis of codons 216 to 218 in PSE-4, a complete library consisting of 40,864 mutants was created. The library of mutants with mutations at positions 216 to 218 in PSE-4 was screened on carbenicillin and ampicillin with the inactivator sulbactam; a collection of 14 mutants was selected, and their bla genes were completely sequenced. Purified wild-type and mutant PSE-4 beta-lactamases were used to measure kinetic parameters. One enzyme, V216S:T217A:G218R, was examined for its peculiar pattern of inhibition. There was an increase in the Km from 68 microM for the wild type to 271 microM for the mutant for carbenicillin and 33 to 216 microM for ampicillin. Relative to the wild-type PSE-4 enzyme, 37- and 30-fold increases in Ki values were observed for the mutant enzyme for sulbactam and tazobactam, respectively. The results that were obtained suggested that positions 216 to 218 are important for interactions with penicillanic acid sulfone inhibitors. In contrast, V216 and A217 in the TEM-1 class A beta-lactamase do not tolerate amino acid residue substitutions. However, for the PSE-4 beta-lactamase, 11 of 14 mutants from the library of mutants with mutations at positions 216 to 218 whose sequences were determined had substitutions at position 216 (G, R, A, S) and position 217 (A, S). The data showed the importance of residues 216 to 218 in their atomic interactions with inactivators in the PSE-4 beta-lactamase structure.

Binding Sites↗
PubMed1997

Cephalosporin substrate specificity determinants of TEM-1 beta-lactamase.

beta-lactamase is a bacterial enzyme that catalyzes the hydrolysis of beta-lactam antibiotics such as penicillins and cephalosporins. TEM-1 beta-lactamase is a prevalent beta-lactamase found in Gram-negative bacteria and is capable of hydrolyzing both penicillins and cephalosporins, except for the extended-spectrum cephalosporins. To identify the sequence determinants in the active site for a given antibiotic substrate, random libraries were constructed that each contain all possible amino acid combinations for the designated region of TEM-1 beta-lactamase. To establish the determinants of substrate specificity for cephalosporins versus those for penicillins, these active site libraries have been screened for mutants with high levels of activity for the second generation cephalosporin cephaloridine. Based on the sequence results, substitutions of W165S, A237T, and E240C were identified as cephalosporin-specific. Kinetic analysis of these mutants was done to determine whether each is capable of distinguishing between the two classes of antibiotics. Both the A237T and E240C substitutions, alone or in combination, exhibited increased cephalosporinase activity and decreased penicillinase activity relative to the wild-type enzyme. A sequence comparison between functional mutants selected for cephaloridine hydrolytic activity and functional mutants previously selected for ampicillin hydrolytic activity suggests that TEM-1 beta-lactamase has greater restrictions in maintaining cephalosporinase activity versus maintaining penicillinase activity.

Amino Acid Sequence↗
PubMed1997

A natural polymorphism in beta-lactamase is a global suppressor.

A M182T substitution was discovered as a second-site suppressor of a missense mutation in TEM-1 beta-lactamase. The combination of the M182T substitution with other substitutions in the enzyme indicates the M182T substitution is a global suppressor of missense mutations in beta-lactamase. The M182T substitution also is found in natural variants of TEM-1 beta-lactamase with altered substrate specificity that have evolved in response to antibiotic therapy. The M182T substitution may have been selected in natural isolates as a suppressor of folding or stability defects resulting from mutations associated with drug resistance. This pathway of protein evolution may occur in other targets of antimicrobial drugs such as the HIV protease.

Enzyme Stability↗
PubMed1996

Selection and characterization of amino acid substitutions at residues 237-240 of TEM-1 beta-lactamase with altered substrate specificity for aztreonam and ceftazidime.

Recently, natural variants of TEM-1 beta-lactamase with amino acid substitutions at residues 237-240 have been identified that have increased hydrolytic activity for extended-spectrum antibiotics such as ceftazidime. To identify the sequence requirements in this region for a given antibiotic, a random library was constructed that contained all possible amino acid combinations for the 3-residue region 237-240 (ABL numbering system) of TEM-1 beta-lactamase. An antibiotic disc diffusion method was used to select mutants with wild-type level activity or greater for the extended-spectrum cephalosporin ceftazidime and the monobactam aztreonam. Mutants that were selected for optimal ceftazidime hydrolysis contained a conserved Ala at position 237, a Ser for Gly substitution at position 238, and a Lys for Glu at position 240. Mutants selected for aztreonam hydrolysis exhibited a Gly for Ala substitution at position 237, a Ser for Gly substitution at position 238, and a Lys/Arg for Glu at position 240. The role of the A237G substitution in differentiating between ceftazidime and aztreonam was further investigated by kinetic analysis of the A237G, E240K, G238S:E240K, and A237G:G238S:E240K enzymes. The A237G single mutant and the G238S:E240K double mutant exhibited increases in catalytic efficiency for both ceftazidime and aztreonam. However, the triple mutant A237G:G238S:E240K, displayed a 12-fold decrease in catalytic efficiency for ceftazidime but a 3-fold increase for aztreonam relative to the G238S:E240K double mutant. Thus, the A237G substitution increases ceftazidime hydrolysis when present alone but antagonizes ceftazidime hydrolysis when it is combined with the G238S:E240K substitutions. In contrast, the A237G substitution acts additively with the G238S:E240K substitutions to increase aztreonam hydrolysis.

Amino Acid Sequence↗
PubMed1996

Amino acid sequence determinants of beta-lactamase structure and activity.

TEM-1 beta-lactamase catalyzes the hydrolysis of beta-lactam antibiotics such as the penicillins and cephalosporins, thus providing for bacterial resistance to these compounds. To determine the amino acid residues critical for the structure and function of TEM-1 beta-lactamase, the codons for each of the 263 amino acid residues that constitute the mature form of the enzyme were randomized using a site-directed mutagenesis procedure. Functional random mutants were selected based on their ability to confer ampicillin resistance to Escherichia coli. The DNA sequence of several functional mutants was determined for each set of random mutants. It was found that 43 out of the 263 amino acid residues do not tolerate substitutions and therefore are critical for the structure and activity of the enzyme. In addition, a comparison of conserved residue positions among functional beta-lactamase mutants with conserved residues in the beta-lactamase gene family identified many positions which did not tolerate substitutions in the mutagenesis studies but are freely substituted among members of the gene family. This observation may be due to the accumulation of compensating mutations among members of the gene family. Finally, the sequence variability at residue positions among functional mutants was quantitated by calculating the effective number of substitutions at each position using information-theoretical entropy. These values were used to obtain a quantitative estimate of the correlation between the sequence variability at a position and the fractional accessible surface area of the residue. The correlation is found to be statistically significant in that buried residues tend to exhibit low variability and invariant residues tend to exhibit low solvent exposure. However, the correlation is weak because most residues are neither completely buried nor invariant.

Amino Acid Sequence↗
PubMed1996

The rate-limiting step in the folding of the cis-Pro167Thr mutant of TEM-1 beta-lactamase is the trans to cis isomerization of a non-proline peptide bond.

The stability and kinetics of unfolding and refolding of the P167T mutant of the TEM-1 beta-lactamase have been investigated as a function of guanidine hydrochloride concentration. The activity of the mutant enzyme was not significantly modified, which strongly suggests that the Glu166-Thr167 peptide bond, like the Glu166-Pro167, is cis. The mutation, however, led to a significant decrease in the stability of the native state relative to both the thermodynamically stable intermediate and the fully unfolded state of the protein. In contrast to the two slower phases seen in the refolding of the wild-type enzyme, only one phase was detected in the refolding of the mutant, indicating a determining role of proline 167 in the kinetics of folding of the wild-type enzyme. The former phases are replaced by rapid refolding when the enzyme is unfolded for short periods of time, but the latter is independent of the time of unfolding. The monophasic refolding reaction of the mutant is proposed to reflect mainly the trans-->cis isomerization of the Glu166-Thr167 peptide bond.

Anti-Bacterial Agents↗
PubMed1996

Systematic mutagenesis of the active site omega loop of TEM-1 beta-lactamase.

Beta-Lactamase is a bacterial protein that provides resistance against beta-lactam antibiotics. TEM-1 beta-lactamase is the most prevalent plasmid-mediated beta-lactamase in gram-negative bacteria. Normally, this enzyme has high levels of hydrolytic activity for penicillins, but mutant beta-lactamases have evolved with activity toward a variety of beta-lactam antibiotics. It has been shown that active site substitutions are responsible for changes in the substrate specificity. Since mutant beta-lactamases pose a serious threat to antimicrobial therapy, the mechanisms by which mutations can alter the substrate specificity of TEM-1 beta-lactamase are of interest. Previously, screens of random libraries encompassing 31 of 55 active site amino acid positions enabled the identification of the residues responsible for maintaining the substrate specificity of TEM-1 beta-lactamase. In addition to substitutions found in clinical isolates, many other specificity-altering mutations were also identified. Interestingly, many nonspecific substitutions in the N-terminal half of the active site omega loop were found to increase ceftazidime hydrolytic activity and decrease ampicillin hydrolytic activity. To complete the active sight study, eight additional random libraries were constructed and screened for specificity-altering mutations. All additional substitutions found to alter the substrate specificity were located in the C-terminal half of the active site loop. These mutants, much like the N-terminal omega loop mutants, appear to be less stable than the wild-type enzyme. Further analysis of a 165-YYG-167 triple mutant, selected for high levels of ceftazidime hydrolytic activity, provides an example of the correlation which exists between enzyme instability and increased ceftazidime hydrolytic activity in the ceftazidime-selected omega loop mutants.

Amino Acid Sequence↗
PubMed1994

Characterization of TEM-1 beta-lactamase mutants from positions 238 to 241 with increased catalytic efficiency for ceftazidime.

Recently, TEM beta-lactamase variants with amino acid substitutions in the active-site pocket of the enzyme have been identified in natural isolates with increased resistance to extended-spectrum cephalosporins such as cefotaxime and ceftazidime. To identify other amino acid substitutions that alter the activity of TEM-1 toward extended-spectrum cephalosporins, a random library was constructed that contained all possible amino acid substitutions over the 3-residue window of 238-241 (ABL numbering). Mutants were selected for 100-fold greater ceftazidime resistance than wild-type. All mutants had a serine substitution at position 238, a lysine or arginine at position 240, and a small amino acid at position 241. The role of each substitution was investigated by constructing individual G238S, E240K, and R241G substitutions as well as the G238S:E240K double mutant. Each enzyme was purified to homogeneity and the kinetic parameters kcat and Km were determined using several substrates. The G238S substitution increases catalytic efficiency for both ceftazidime and cefotaxime. However, to achieve large increases in catalytic efficiency, both G238S and the E240K substitutions are required. The R241G substitution results in a small increase in catalytic efficiency for only ceftazidime. The contribution of each residue to the transition-state stabilization energy was found to be additive indicating that the substitutions act independently to change the catalytic properties of the enzyme.

Anti-Bacterial Agents↗
PubMed1994

Systematic mutagenesis of the yeast mating pheromone receptor third intracellular loop.

Signal transduction in the mating pathway of the yeast Saccharomyces cerevisiae is initiated by binding of a peptide pheromone to a G protein-coupled receptor (Ste2). We systematically have mutated the third intracellular loop of the Ste2 receptor to investigate its functional significance. We substituted each of the 13 amino acids in the loop with alanine individually or together with one other residue. In addition, we used a site-directed random replacement mutagenesis technique to replace a region encoding three amino acids in the loop with random sequence. Over 80 such Ste2 mutants have been analyzed by several functional and biochemical criteria in a yeast strain that carries a genomic deletion of the STE2 gene. The mutant phenotypes range from fully functional to severely compromised in signaling. The observation that amino acid substitutions in the third intracellular loop of the Ste2 receptor can affect activation of the yeast mating response implicates the loop in this signal transduction pathway. The types of mutations that compromise the function of the receptor may provide clues to the physical interaction between the receptor and the G protein.

Amino Acid Sequence↗
PubMed1994

Evolution of antibiotic resistance: several different amino acid substitutions in an active site loop alter the substrate profile of beta-lactamase.

In order to understand how TEM-1 beta-lactamase substrate specificity can be altered by mutation, amino acid residues 161 through to 170 were randomly mutagenized to sample all possible amino acid substitutions. The 161-170 region includes a portion of an omega loop structure, which is involved in the formation of the active-site pocket. The percentage of random sequences that provide bacterial resistance to either ampicillin or to the extended-spectrum cephalosporin ceftazidime was determined. It was found that the sequence requirements for wild-type levels of ampicillin resistance are much more stringent than the sequence requirements for ceftazidime resistance. Surprisingly, more than 50% of all amino acid substitutions in the 161-170 region result in levels of ceftazidime resistance at least three times greater than wild type. In addition, by increasing the level of the selection for ceftazidime resistance, substitutions that result in a greater than 100-fold increase in ceftazidime resistance were identified. Characterization of altered beta-lactamase enzymes indicated that while their catalytic efficiency (kcat/Km) for ceftazidime hydrolysis is higher, the enzymes are poorly expressed relative to wild-type TEM-1 beta-lactamase.

Amino Acid Sequence↗