Search PubMed⌕ Search

Biomedical subjects

T L Poulos

Publications and source records attributed to T L Poulos.

At least 91 records · Page 5Linked to original sources
PubMed1993

Inhibitor-induced conformational change in cytochrome P-450CAM.

The X-ray crystal structures of cytochrome P-450CAM complexed with both enantiomers of a chiral, multifunctional inhibitor have been refined to R-factors of 21.0% [(+)-enantiomer] and 19.6% [(-)-enantiomer] at approximately 2.1-A resolution. Binding of either enantiomer, both considerably larger than the natural substrate camphor, results in similar, dramatic structural changes in the enzyme. In contrast to all previous P-450CAM crystallographic structures, the Tyr96 side chain is not pointing "down" toward the heme but is rather directed "up" into the proposed substrate access channel. This conformational change is accompanied by the displacement of the Phe193 side chain out into the solvent at the enzyme surface. These changes are consistent with the assignment of this region of the enzyme as the access channel [Poulos et al. (1986) Biochemistry 25, 5314-5322] and suggest that several aromatic residues lining the channel may be involved in substrate recognition and channeling to the active site. The cation usually observed coordinated to the Tyr96 carbonyl oxygen is missing in the presence of the (+)-enantiomer but is present with the (-)-enantiomer. The Phe87 side chain, located near the inhibitor binding site, adopts different orientations depending upon which enantiomer is bound. Finally, electron density reveals that although the inhibitor enantiomers were dichlorinated as provided, when bound to P-450CAM the chlorine atoms are present at only 0-20% occupancy, probably reflecting selective binding of impurities in the samples. Coordinates of these inhibited P-450CAM complexes have been deposited in the Brookhaven Protein Data Bank [Bernstein et al. (1977) J. Mol. Biol. 112, 535-542].

Binding Sites↗
PubMed1993

Crystallographic refinement of lignin peroxidase at 2 A.

The crystal structure of the major lignin peroxidase isozyme from Phanerocheate chrysosporium has been refined to an R = 0.15 for data between 8 A and 2.03 A. The refined model consists of 2 lignin peroxidase molecules in the asymmetric unit, 2 calcium ions per monomer, 1 glucosamine per monomer N-linked to Asn-257, and 476 water molecules per asymmetric unit. The model exhibits excellent geometry with a root mean square deviation from ideality in bond distances and angles of 0.014 A and 2.9 degrees, respectively. Molecule 1 consists of all 343 residues, while molecule 2 consists of residues 1-341. The overall root mean square deviation in backbone atoms between the 2 molecules in the asymmetric unit is 0.36 A. The refinement at 2.0 A confirms our conclusions based on the partially refined 2.6-A structure (Edwards, S. L., Raag, R., Wariishi, H., Gold, M. H., and Poulos, T. L. (1993) Proc. Natl. Acad. Sci. U.S.A. 90, 750-754). The overall fold of lignin peroxidase closely resembles that of cytochrome c peroxidase. A superimposition of alpha-carbons gives a root mean square deviation of 2.65 A between the two peroxidases and 1.66 A for the helices. The active sites also are similar since both contain a proximal histidine heme ligand hydrogen-bonded to a buried aspartate residue and both contain histidine and arginine residues in the distal peroxide binding pocket. The most obvious difference in the active site is that whereas cytochrome c peroxidase has tryptophan residues located in the proximal and distal heme pockets, lignin peroxidase has phenylalanines. There are four other especially noteworthy differences in the two structures. First, although the heme in cytochrome c peroxidase is recessed about 10 A from the molecular surface, the heme pocket is open to solvent. The analogous opening in lignin peroxidase is smaller which can explain in part the differences in reactivity of the two hemes. This same opening may provide the site for binding small aromatic substrates. Second, lignin peroxidase has a carboxylate-carboxylate hydrogen bond important for heme binding that is not present in cytochrome c peroxidase. Third, lignin peroxidase contains 2 structural calcium ions while cytochrome c peroxidase contains no calcium. The calciums in lignin peroxidase coordinate to residues near the C-terminal ends of the distal and proximal helices and hence are probably important for maintaining the integrity of the active site. Fourth, the extra 49 residues in lignin peroxidase not present in cytochrome c peroxidase constitutes the C-terminal end of the molecule with the C terminus situated at the "front" end of the molecule between the two heme propionates.

Binding Sites↗
PubMed1993

Crystal structure of lignin peroxidase.

The crystal structure of lignin peroxidase (LiP) from the basidiomycete Phanerochaete chrysosporium has been determined to 2.6 A resolution by usine multiple isomorphous replacement methods and simulated annealing refinement. Of the 343 residues, residues 3-335 have been accounted for in the electron density map, including four disulfide bonds. The overall three-dimensional structure is very similar to the only other peroxidase in this group for which a high-resolution crystal structure is available, cytochrome c peroxidase, despite the fact that the sequence identity is only approximately 20%, LiP has four disulfide bonds, while cytochrome c peroxidase has none, and LiP is larger (343 vs. 294 residues). The basic helical fold and connectivity defined by 11 helical segments with the heme sandwiched between the distal and proximal helices found in cytochrome c peroxidase is maintained in LiP. Both enzymes have a histidine as a proximal heme ligand, which is hydrogen bonded to a buried aspartic acid side chain. The distal or peroxide binding pocket also is similar, including the distal arginine and histidine. The most striking difference is that, whereas cytochrome c peroxidase has tryptophans contacting the distal and proximal heme surfaces, LiP has phenylalanines. This in part explains why, in the reaction with peroxides, cytochrome c peroxidase forms an amino acid-centered free radical, whereas LiP forms a porphyrin pi cation radical.

Journal Article↗
PubMed1993

Peroxidases.

The availability of recombinant cytochrome c peroxidase from yeast has already proved to be of considerable importance in developing the protein engineering of peroxidases and of metalloproteins in general. With the recent increase in information on peroxidase sequences, further developments in recombinant expression systems and the determination of an increasing number of peroxidase crystal structures, it should soon be possible to make significant advances in engineering peroxidases for biotechnological purposes.

Binding Sites↗
PubMed1992

Conversion of the proximal histidine ligand to glutamine restores activity to an inactive mutant of cytochrome c peroxidase.

Using site-directed mutagenesis, a double mutant in yeast cytochrome c peroxidase (CCP) has been constructed where the proximal ligand, His175, has been converted to glutamine and the neighboring Trp191 has been converted to phenylalanine. The refined 2.4-A crystal structure of the double mutant shows that the Gln175 side chain is within coordination distance of the heme iron atom and that Phe191 occupies the same position as Trp191 in the native enzyme with very little rearrangement outside the immediate vicinity of the mutations. Consistent with earlier work, we find that the single mutant, His175-->Gln, is fully active under steady state assay conditions and that as reported earlier (Mauro et al., 1988), the Trp191-->Phe mutant exhibits only < 0.05% activity. However, the double mutant, His175-->Gln/Phe191-->Phe, exhibits 20% wild type activity. Since it is known that the Trp191-->Phe mutant is inactive because it can no longer transfer electrons from ferrocytochrome c, changing the nature of the proximal ligand is able to restore this activity. These results raise interesting questions regarding the mechanism of interprotein electron transfer reactions.

Amino Acid Sequence↗
PubMed1992

Cytochrome P450cam: crystallography, oxygen activation, and electron transfer.

Several crystal structures of various substrate and inhibited complexes of the camphor monoxygenase, cytochrome P450cam from Pseudomonas putida, are now available. These structures, together with mutagenesis, biochemical, and biophysical studies, have allowed for a detailed penetration into the problem of how P450s activate molecular oxygen, control stereoselectivity, and transfer electrons. This review will provide a summary of the crystallographic work in light of what these structures have taught us about P450 function.

Amino Acid Sequence↗
PubMed1992

Functional implications of interleukin-1 beta based on the three-dimensional structure.

The molecular structure of interleukin-1 beta, a hormone-like cytokine with roles in several disease processes, has been determined at 2.0 A resolution and refined to a crystallographic R-factor of 0.19. The framework of this molecule consists of 12 antiparallel beta-strands exhibiting pseudo-3-fold symmetry. Six of the strands make up a beta-barrel with polar residues concentrated at either end. Analysis of the three-dimensional structure, together with results from site-directed mutagenesis and biochemical and immunological studies, suggest that the core of the beta-barrel plays an important functional role. A large patch of charged residues on one end of the barrel is proposed as the binding surface with which IL-1 interacts with its receptor.

Humans↗
PubMed1991

Crystal structure of the cytochrome P-450CAM active site mutant Thr252Ala.

The crystal structure of a cytochrome P-450CAM site-directed mutant in which the active site Thr252 has been replaced with an Ala (Thr252Ala) has been refined to an R factor of 0.18 at 2.2 A. According to sequence alignments (Nelson & Strobel, 1989), Thr252 is highly conserved among P-450 enzymes. The crystallographic structure of ferrous camphor- and carbon monoxide-bound P-450CAM (Raag & Poulos, 1989b) suggests that Thr252 is a key active site residue, forming part of the dioxygen-binding site. Mutation of the active site threonine to alanine produces an enzyme in which substrate hydroxylation is uncoupled from electron transfer. Specifically, hydrogen peroxide and "excess" water are produced instead of the product, 5-exo-hydroxycamphor. The X-ray structure has revealed that a local distortion in the distal helix between Gly248 and Thr252 becomes even more severe in the Thr252Ala mutant. Furthermore, a solvent molecule not present in the native enzyme is positioned in the dioxygen-binding region of the mutant enzyme active site. In this location, the solvent molecule could sterically interfere with and destabilize dioxygen binding. In addition, the active site solvent molecule is connected, via a network of hydrogen bonds, with an internal solvent channel which links distal helix residues to a buried Glu side chain. Thus, solvent protons appear to be much more accessible to dioxygen in the mutant than in the wild-type enzyme, a factor which may promote hydrogen peroxide and/or water production instead of substrate hydroxylation. On the basis of crystallographic and mutagenesis data, a proton delivery pathway involving residues Lys178/Arg186, Asp251, and Thr252 is proposed for wild-type P-450CAM. Coordinates of structures discussed in this paper have been submitted to the Brookhaven Protein Data Bank (Bernstein et al., 1977).

Alanine↗
PubMed1991

Characterization of recombinant Bacillus megaterium cytochrome P-450 BM-3 and its two functional domains.

Bacillus megaterium cytochrome P-450BM-3 and its two functional domains, the heme and flavin domains, have been purified and characterized using an Escherichia coli expression system. Recombinant P-450BM-3 behaves both spectrally and enzymatically the same as the enzyme produced from the natural host, B. megaterium, and another E. coli system recently described (Bouddupalli, S. S., Estabrook, R. W., and Peterson, J. A. (1990) J. Biol. Chem. 265, 4233-4239). Reduction of the flavins in P-450BM-3 domain with NADPH appears to be very similar to microsomal P-450 reductases where two reducing equivalents are consumed to fully reduce the FMN while the FAD is converted to the semiquinone in an one electron reduction. NADPH reduction of the heme occurs only in the presence of substrate suggesting, by analogy with the cytochrome P-450CAM system, a possible increase in iron redox potential of the heme upon substrate binding which facilitates electron transfer from the flavins to the heme. The flavin domain retains a high level of cytochrome c reductase activity and also reacts with NADPH to give a 3-electron reduced product. The heme domain retains the ability to bind substrate and generates the characteristic 450-nm absorption band upon reduction in the presence of CO. The heme domain has been crystallized and a preliminary set of x-ray diffraction data obtained.

Amino Acid Sequence↗
PubMed1991

Crystal structures of cytochrome P-450CAM complexed with camphane, thiocamphor, and adamantane: factors controlling P-450 substrate hydroxylation.

X-ray crystal structures have been determined for complexes of cytochrome P-450CAM with the substrates camphane, adamantane, and thiocamphor. Unlike the natural substrate camphor, which hydrogen bonds to Tyr96 and is metabolized to a single product, camphane, adamantane and thiocamphor do not hydrogen bond to the enzyme and all are hydroxylated at multiple positions. Evidently the lack of a substrate-enzyme hydrogen bond allows substrates greater mobility in the active site, explaining this lower regiospecificity of metabolism as well as the inability of these substrates to displace the distal ligand to the heme iron. Tyr96 is a ligand, via its carbonyl oxygen atom, to a cation that is thought to stabilize the camphor-P-450CAM complex [Poulos, T. L., Finzel, B. C., & Howard, A. J. (1987) J. Mol. Biol. 195, 687-700]. The occupancy and temperature factor of the cationic site are lower and higher, respectively, in the presence of the non-hydrogen-bonding substrates investigated here than in the presence of camphor, underscoring the relationship between cation and substrate binding. Thiocamphor gave the most unexpected orientation in the active site of any of the substrates we have investigated to date. The orientation of thiocamphor is quite different from that of camphor. That is, carbons 5 and 6, at which thiocamphor is primarily hydroxylated [Atkins, W. M., & Sligar, S. G. (1988) J. Biol. Chem. 263, 18842-18849], are positioned near Tyr96 rather than near the heme iron. Therefore, the crystallographically observed thiocamphor-P-450CAM structure may correspond to a nonproductive complex. Disordered solvent has been identified in the active site in the presence of uncoupling substrates that channel reducing equivalents away from substrate hydroxylation toward hydrogen peroxide and/or "excess" water production. A buried solvent molecule has also been identified, which may promote uncoupling by moving from an internal location to the active site in the presence of highly mobile substrates.

Adamantane↗
PubMed1991

A metal-mediated hydride shift mechanism for xylose isomerase based on the 1.6 A Streptomyces rubiginosus structures with xylitol and D-xylose.

The crystal structure of recombinant Streptomyces rubiginosus D-xylose isomerase (D-xylose keto-isomerase, EC 5.3.1.5) solved by the multiple isomorphous replacement technique has been refined to R = 0.16 at 1.64 A resolution. As observed in an earlier study at 4.0 A (Carrell et al., J. Biol. Chem. 259: 3230-3236, 1984), xylose isomerase is a tetramer composed of four identical subunits. The monomer consists of an eight-stranded parallel beta-barrel surrounded by eight helices with an extended C-terminal tail that provides extensive contacts with a neighboring monomer. The active site pocket is defined by an opening in the barrel whose entrance is lined with hydrophobic residues while the bottom of the pocket consists mainly of glutamate, aspartate, and histidine residues coordinated to two manganese ions. The structures of the enzyme in the presence of MnCl2, the inhibitor xylitol, and the substrate D-xylose in the presence and absence of MnCl2 have also been refined to R = 0.14 at 1.60 A, R = 0.15 at 1.71 A, R = 0.15 at 1.60 A, and R = 0.14 at 1.60 A, respectively. Both the ring oxygen of the cyclic alpha-D-xylose and its C1 hydroxyl are within hydrogen bonding distance of NE2 of His-54 in the structure crystallized in the presence of D-xylose. Both the inhibitor, xylitol, and the extended form of the substrate, D-xylose, bind such that the C2 and C4 OH groups interact with one of the two divalent cations found in the active site and the C1 OH with the other cation. The remainder of the OH groups hydrogen bond with neighboring amino acid side chains. A detailed mechanism for D-xylose isomerase is proposed. Upon binding of cyclic alpha-D-xylose to xylose isomerase, His-54 acts as the catalytic base in a ring opening reaction. The ring opening step is followed by binding of D-xylose, involving two divalent cations, in an extended conformation. The isomerization of D-xylose to D-xylulose involves a metal-mediated 1,2-hydride shift. The final step in the mechanism is a ring closure to produce alpha-D-xylulose. The ring closing is the reverse of the ring opening step. This mechanism accounts for the majority of xylose isomerase's biochemical properties, including (1) the lack of solvent exchange between the 2-position of D-xylose and the 1-pro-R position of D-xylulose, (2) the chemical modification of histidine and lysine, (3) the pH vs. activity profile, and (4) the requirement for two divalent cations in the mechanism.

Aldose-Ketose Isomerases↗
PubMed1991

Engineering proteins, subcloning and hyperexpressing oxidoreductase genes.

A very efficient system for subcloning and studying protein sequences, combining previously established elements for hyperexpression, replication and screening, was used to hyperproduce and characterize seven different products. It expedited the cloning of genes, in a multipurpose recombinant DNA construct, for all the requirements to study and engineer proteins with a strain of Escherichia coli. Genes encoding six heme proteins and a flavoprotein have been subcloned and expressed to 13-30% of the total cell protein, greatly facilitating purification and analyses. Three of the heme proteins and the flavoprotein incorporated prosthetic groups in E. coli, and exhibited the expected activities. Four of the enzymes have been purified to homogeneity and two of these crystallized for X-ray diffraction analysis. A rapid mutagenesis protocol, based on polymerase chain reactions, was successfully applied to clone derivatives of one of these enzymes, cytochrome c peroxidase. Thus, this system fulfills all criteria for engineering proteins in an efficient and concerted manner.

Bacterial Proteins↗
PubMed1990

Formation, crystal structure, and rearrangement of a cytochrome P-450cam iron-phenyl complex.

Cytochrome P-450cam reacts with phenyldiazene (PhN = NH), or less efficiently with phenylhydrazine, to give a catalytically inactive complex with an absorption maximum at 474 nm. The prosthetic group extracted anaerobically from the inactivated protein has the spectroscopic properties of a sigma phenyl-iron complex and rearranges, on exposure to air and acid, to an approximately equal mixture of the four N-phenylprotoporphyrin IX regioisomers. The crystal structure of the intact protein complex, refined at 1.9-A resolution to an R factor of 20%, confirms that the phenyl group is directly bonded through one of its carbons to the iron atom. The phenyl ring is tilted from the heme normal by about 10 degrees in the opposite direction from that in which carbon monoxide tilts when bound to P-450cam. Camphor, the natural substrate for P-450cam, is larger than a phenyl group and hydrogen bonds to Tyr 96, the only hydrophilic residue near the active site. Electron density in the active site in addition to that contributed by the phenyl group suggests that two water molecules occupy part of the camphor binding site but are not within hydrogen-bonding distance of Tyr 96. As observed in a previous crystallographic study of inhibitor-P-450cam complexes [Poulos, T.L., & Howard, A.J. (1987) Biochemistry 26, 8165-8174], there are large changes in both the atomic positions and mobilities of the residues in the proposed substrate access channel region of the protein.(ABSTRACT TRUNCATED AT 250 WORDS)

Bacterial Proteins↗
PubMed1990

Resonance Raman spectroscopy of cytochrome c peroxidase single crystals on a variable-temperature microscope stage.

Good quality resonance Raman (RR) spectra have been obtained for cytochrome c peroxidase single crystals (0.2 x 0.5 x 1 mm) lying on their 110 faces on a microscope stage. Crystal orientation and polarization effects are observed which differentiate the RR bands on the basis of the symmetries of the porphyrin vibrational modes. The measured depolarization ratios are accurately calibrated for isolated bands of both totally symmetric and non totally symmetric modes by using a model of D4h chromophores in an oriented gas using the crystal structure atomic coordinates. The calculations indicate that the electronic transition moments are approximately along the lines connecting the methine bridges, suggesting an electronic steering effect of the vinyl groups. Deviations are observed for bands associated with the porphyrin v10 and the vinyl C = C stretching modes, which may be due to their near-resonant interaction. The band frequencies correspond to those of a five-coordinate high-spin FeIII heme, as previously observed in solution, consistent with the X-ray structure showing the Fe atom to be out of the heme plane on the proximal side with a distal water molecule located at a nonbonded distance, 2.4 A. The temperature dependence of the RR spectrum was determined with a Joule-Thompson cryostat on crystals sealed in glass capillaries. As the temperature is lowered, the spectrum converts to one characteristic of a low-spin FeIII heme. The conversion, which is readily reversible, is quite gradual. It is detectable at -50 degrees C but is incomplete even at -190 degrees C. A temperature effect on the protein structure is proposed which permits the Fe atom to approach the heme plane and bind the distal water molecule, or the distal histidine.

Cytochrome-c Peroxidase↗
PubMed1990

Ligand binding and structural perturbations in cytochrome c peroxidase. A crystallographic study.

Crystal structures of the complexes formed between cytochrome c peroxidase and cyanide, nitric oxide, carbon monoxide, and fluoride have been determined and refined to 1.85 A. In all four complexes significant changes occur in the distal heme pocket due to movement of Arg-48, His-52, and a rearrangement of active site water molecules. In the cyanide, nitric oxide, and carbon monoxide complexes, Arg-48 moves away from the ligand while in the fluoride complex Arg-48 moves in toward the ligand to form a hydrogen bond or ion pair with the fluoride. More subtle changes occur on the proximal side of the heme. In an earlier study at lower resolution (Edwards, S. L., Kraut, J., and Poulos, T. L. (1988) Biochemistry 27, 8074-8081), we found that nitric oxide binding causes perturbations in the proximal domain involving Trp-191 which has been confirmed by the present study. Trp-191 is stacked parallel to and in contact with the proximal ligand, His-175. Nitric oxide binding results in a slight movement of Trp-191 away from His-175 and a large increase in crystallographic temperature factors indicating increased mobility of these residues on the proximal side of the heme. These proximal-side changes are unique to nitric oxide and are not related strictly to spin-state or oxidation state of the iron atom since similar changes were not observed in the cyanide (low-spin ferric), carbon monoxide (low-spin ferrous), or fluoride (high-spin ferric) complexes.

Carbon Monoxide↗
PubMed1989

Putidaredoxin competitively inhibits cytochrome b5-cytochrome P-450cam association: a proposed molecular model for a cytochrome P-450cam electron-transfer complex.

Cytochrome b5 has been genetically engineered to afford a fluorescent derivative capable of monitoring its association with cytochrome P-450cam from Pseudomonas putida [Stayton, P. S., Fisher, M. T., & Sligar, S. G. (1988) J. Biol. Chem. 263, 13544-13548]. In the mutant cytochrome b5, threonine is replaced by a cysteine at position 65 (T65C) and has been labeled with the environmentally sensitive fluorophore acrylodan. In this paper, the physiological P-450cam reductant putidaredoxin, an Fe2S2.Cys4 iron-sulfur protein, is shown to competitively inhibit the cytochrome b5 association, suggesting that cytochrome b5 and putidaredoxin bind to a similar site on the cytochrome P-450cam surface. Since the crystal structures for both cytochrome b5 and cytochrome P-450cam have been solved to high resolution, the complex has been computer modeled, and a good fit was found on the proximal surface of nearest approach to the P-450cam heme prosthetic group. The proposed model includes electrostatic contacts between conserved cytochrome b5 carboxylates Glu-44, Glu-48, Asp-60, and the exposed heme propionate with cytochrome P-450cam basic residues Lys-344, Arg-72, Arg-112, and Arg-364, respectively. Putidaredoxin has similarly been shown to contain a carboxylate-based binding surface, and the current results suggest that if the model is correct, then it also interacts at the proposed site, probably utilizing similar P-450cam electrostatic contacts.

Binding, Competitive↗
PubMed1989

Crystal structure of the carbon monoxide-substrate-cytochrome P-450CAM ternary complex.

The crystal structure of the ternary complex formed between carbon monoxide (CO), camphor, and ferrous cytochrome P-450CAM has been refined to an R value of 17.9% at 1.9-A resolution. To accommodate the CO molecule, the substrate, camphor, moves about 0.8 A while at the same time remaining in nonbonded contact with CO. The average temperature factor of the camphor atoms is about 50% higher in the CO complex, suggesting that the camphor is more loosely bound in this ternary complex. The Fe-C-O angle is about 166 degrees, and thus, CO appears to be bent from the heme normal, as it is in various CO-globin complexes, due to steric interactions with active site groups. The oxygen atom of the CO molecule is nestled into a groove formed by an unusual helical hydrogen bond in the distal helix between the highly conserved Thr 252 and Gly 248 residues. In the transition from the ferric camphor-bound binary complex to the ferrous CO-camphor-bound ternary complex, the heme iron atom moves into the plane defined by the pyrrole nitrogens by about 0.41 A. Although the axial Cys ligand also moves toward the heme, the S-Fe bond stretches from about 2.20 A in the absence of CO to about 2.41 A once CO has bound.

Camphor↗