Search PubMed⌕ Search

Biomedical subjects

T D Pollard

Publications and source records attributed to T D Pollard.

At least 127 records · Page 7Linked to original sources
PubMed1990

The actin-binding protein profilin binds to PIP2 and inhibits its hydrolysis by phospholipase C.

Profilin is generally thought to regulate actin polymerization, but the observation that acidic phospholipids dissociate the complex of profilin and actin raised the possibility that profilin might also regulate lipid metabolism. Profilin isolated from platelets binds with high affinity to small clusters of phosphatidylinositol 4,5-bisphosphate (PIP2) molecules in micelles and also in bilayers with other phospholipids. The molar ratio of the complex of profilin with PIP2 is 1:7 in micelles of pure PIP2 and 1:5 in bilayers composed largely of other phospholipids. Profilin competes efficiently with platelet cytosolic phosphoinositide-specific phospholipase C for interaction with the PIP2 substrate and thereby inhibits PIP2 hydrolysis by this enzyme. The cellular concentrations and binding characteristics of these molecules are consistent with profilin being a negative regulator of the phosphoinositide signaling pathway in addition to its established function as an inhibitor of actin polymerization.

Actins↗
PubMed1990

Acanthamoeba myosin-II minifilaments assemble on a millisecond time scale with rate constants greater than those expected for a diffusion limited reaction.

We have shown previously that Acanthamoeba myosin-II minifilaments assemble by three successive dimerization steps, forming, progressively, monomers, antiparallel dimers, antiparallel tetramers, and finally the full size octameric minifilament (Sinard, J. H., Stafford, W. F., and Pollard, T. D. (1989) J. Cell Biol. 109, 1537-1548). In the current study, we investigate the kinetics of the assembly of these minifilaments, initiating assembly by the rapid dilution of salt in a stopped-flow light scattering apparatus. The majority of the reaction is completed within 50 ms and is greater than 90% completed within 1 s. Assembly data over a greater than 6-fold myosin concentration range can be fit using the successive dimerization mechanism with a single set of rate constants. Second order rate constants for the initial steps in the assembly reaction exceed 10(8) M-1 s-1, and equilibrium dissociation constants predict a very low critical concentration, consistent with previous data. Other possible assembly mechanisms do not adequately fit all of the available data. Filament disassembly at 300 mM KCl is even more rapid, and there is both an increase in the dissociation rate constants and a decrease in the association rate constants with increasing KCl. Aggregation of minifilaments induced by Mg2+ is much slower and takes many minutes to reach equilibrium.

Acanthamoeba↗
PubMed1990

A stopped-flow/rapid-freezing machine with millisecond time resolution to prepare intermediates in biochemical reactions for electron microscopy.

We have developed an instrument capable of freezing transient intermediates in rapid biochemical reactions for subsequent freeze-fracturing, replication, and viewing by transmission electron microscopy. The machine combines a rapid mixing unit similar to one widely used in chemical kinetics (Johnson, 1986) with a propane jet freezing unit previously used to prepare static samples for freeze-fracturing (Gilkey and Staehelin, 1986). The key element in the system is a unique thin-walled flow cell of copper that allows for injection and aging of the sample, followed by rapid freezing. During freeze-fracturing, a tangential cut is made along the wall of the flow cell to expose the sample for etching and replication. The dead time required for mixing and injection of the reactants into the flow cell is less than 5 ms. Electronic controls allow one to specify, on a millisecond time scale, any time above 5 ms between initiation of the reaction and quenching by rapid freezing.

Actins↗
PubMed1990

Actin.

Explore the source record for details and available documents.

Actins↗
PubMed1990

Identification of functional regions on the tail of Acanthamoeba myosin-II using recombinant fusion proteins. I. High resolution epitope mapping and characterization of monoclonal antibody binding sites.

We used a series of COOH-terminally deleted recombinant myosin molecules to map precisely the binding sites of 22 monoclonal antibodies along the tail of Acanthamoeba myosin-II. These antibodies bind to 14 distinguishable epitopes, some separated by less than 10 amino acids. The positions of the binding sites visualized by electron microscopy agree only approximately with the physical positions of these sites on the alpha-helical coiled-coil tail. On the other hand, the epitope map agrees precisely with competitive binding studies: all antibodies that share an epitope compete with each other for binding to myosin. Antibodies with adjacent epitopes can compete with each other at linear distances up to 5 or 6 nm, and many antibodies that bind 3-7-nm apart can enhance the binding of each other to myosin. Most of the antibodies that bind to the distal 37 nm of the tail disrupt assembly of octameric minifilaments and, depending upon the exact location of the binding site, stop assembly at specific steps yielding, for example, monomers, antiparallel dimers, parallel dimers or antiparallel tetramers. The effects of these antibodies on assembly identify sites on the tail that are required for individual steps in minifilament assembly. Experiments on the assembly of truncated myosin-II tails have revealed a complementary group of sites that participate in the assembly reactions (Sinard, J.H., D.L. Rimm, and T.D. Pollard. 1990. J. Cell Biol. 111:2417-2426). Antibodies that bind to the distal tail but do not affect assembly appear to have a low affinity for myosin-II. Antibodies that bind to the proximal 50 nm of the tail do not inhibit the assembly of minifilaments. Many antibodies that bind to the tail of myosin-II, even some that have no obvious effect on minifilament assembly, can inhibit the actomyosin ATPase activity and the contraction of an actin gel formed in crude extracts. An antibody that binds between amino acids 1447 and 1467 inhibits the phosphorylation of serine residues distal to residue 1483.

Acanthamoeba↗
PubMed1990

Identification of functional regions on the tail of Acanthamoeba myosin-II using recombinant fusion proteins. II. Assembly properties of tails with NH2- and COOH-terminal deletions.

We used purified fusion proteins containing parts of the Acanthamoeba myosin-II tail to localize those regions of the tail responsible for each of the three steps in the successive dimerization mechanism (Sinard, J. H., W. F. Stafford, and T. D. Pollard. 1989. J. Cell Biol. 107:1537-1547) for Acanthamoeba myosin-II minifiliment assembly. Fusion proteins containing the terminal approximately 90% of the myosin-II tail assemble normally, but deletions within the last 100 amino acids of the tail sequence alter or prevent assembly. The first step in minifilament assembly, formation of antiparallel dimers, requires the COOH-terminal approximately 30 amino acids that are thought to form a nonhelical domain at the end of the coiled-coil. The second step, formation of antiparallel tetramers, requires the last approximately 40 residues in the coiled-coil. The final step, the association of two antiparallel tetramers to form the completed octameric minifilament, requires residues approximately 40-70 from the end of the coiled-coil. A region of the tail near the junction with the heads is important for tight packing of the tails in the minifilaments. Divalent cations induce the lateral aggregation of minifilaments formed from native myosin-II or fusion proteins containing a nonmyosin "head," but under the same conditions fusion proteins composed essentially only of myosin tail sequences with very little nonmyosin sequences form paracrystals. The region of the tail necessary for this paracrystal formation lies NH2-terminal to amino acid residue 1,468 in the native myosin-II sequence.

Acanthamoeba↗
PubMed1990

The affinities of human platelet and Acanthamoeba profilin isoforms for polyphosphoinositides account for their relative abilities to inhibit phospholipase C.

In light of recent work implicating profilin from human platelets as a possible regulator of both cytoskeletal dynamics and inositol phospholipid-mediated signaling, we have further characterized the interaction of platelet profilin and the two isoforms of Acanthamoeba profilin with inositol phospholipids. Profilin from human platelets binds to phosphatidylinositol-4-monophosphate (PIP) and phosphatidylinositol-4,5-bisphosphate (PIP2) with relatively high affinity (Kd approximately 1 microM for PIP2 by equilibrium gel filtration), but interacts only weakly (if at all) with phosphatidylinositol (PI) or inositol trisphosphate IP3) in small-zone gel-filtration assays. The two isoforms of Acanthamoeba profilin both have a lower affinity for PIP2 than does human platelet profilin, but the more basic profilin isoform from Acanthamoeba (profilin-II) has a much higher (approximately 10-microM Kd) affinity than the acidic isoform (profilin-I, 100 to 500-microM Kd). None of the profilins bind to phosphatidylserine (PS) or phosphatidylcholine (PC) in small-zone gel-filtration experiments. The differences in affinity for PIP2 parallel the ability of these three profilins to inhibit PIP2 hydrolysis by soluble phospholipase C (PLC). The results show that the interaction of profilins with PIP2 is specific with respect to both the lipid and the proteins. In Acanthamoeba, the two isoforms of profilin may have specialized functions on the basis of their identical (approximately 10 microM) affinities for actin monomers and different affinities for PIP2.

Acanthamoeba↗
PubMed1989

Binding of myosin I to membrane lipids.

The single-headed myosins called myosin-I were first isolated from the protozoan Acanthamoeba and subsequently identified in other cells. We previously reported evidence that myosin-I is responsible for the movement of membranes, extracted from Acanthamoeba, along actin filaments in vitro. Here we show for the first time that myosin-I can bind directly to NaOH-extracted membranes isolated from Acanthamoeba and to vesicles of pure lipids with an affinity sufficient for extensive binding in the cell. Membrane-bound myosin-I may provide a mechanism for many cellular movements previously thought to involve filamentous myosin-II.

Acanthamoeba↗
PubMed1989

New plasmid vectors for high level synthesis of eukaryotic fusion proteins in Escherichia coli.

Production of eukaryotic proteins in Escherichia coli has become rather simple since commercially available bacteriophage and plasmid vector systems allow investigators to select the optimal system for their particular problem. A common question is which system to use to produce the largest quantity of soluble recombinant protein with minimal, if any, bacterial protein fused to it. We have constructed a new set of plasmid vectors that produce large amounts of a fusion proteins that contain less than 25 amino acids of bacterial protein. We started with pATH-1, a plasmid expression vector comprised of the trpEp promoter and 37 kDa of the TrpE protein followed by a M13mp13 multiple cloning site for insertion of sequences to be expressed. We deleted the majority of the eukaryotic trpE sequence to produce a multiple frame, multiple enzyme cloning site, plasmid expression vector set called pRX. Transformation of E. coli CAG-456 (Baker et al., 1984) with this vector with an Acanthamoeba myosin tail sequence inserted in the correct frame yields a fusion protein that represents 45% of the total soluble protein. We have produced and purified 100 mg of this Acanthamoeba myosin-II fusion protein per liter of cell suspension.

Acanthamoeba↗
PubMed1989

Microinjection into Acanthamoeba castellanii of monoclonal antibodies to myosin-II slows but does not stop cell locomotion.

To study the in vivo role of myosin-II in Acanthamoeba castellanii, motile cells were microinjected with monoclonal antibodies raised against the myosin-II heavy chain. All injected cells underwent a transient shock response. It was found that although injection of buffer alone or of an endogenous Acanthamoeba protein decreased the motility of injected cells from 7 microns/min to approximately 3 microns/min, injection of monoclonal antibodies specific for myosin-II decreased motility further to approximately 0.8 micron/min. This effect was seen whether or not the monoclonal antibody to myosin-II inhibited the actomyosin-II MgATPase activity in vitro. Levels of antibody far in excess of endogenous myosin-II concentrations could not completely block amoeboid movement. The morphology of moving antimyosin-II-injected cells was unusual, suggesting a greater defect in the ability to retract the trailing edge of the cell rather than to extend the leading edge. Endosomes frequently disappeared from injected cells, and although buffer-injected cells rapidly recovered visible endosomes (50% recovery at 5 min), endosomes were not seen in antimyosin-II-injected cells until, on the average, approximately 50 min after injection. Injection of a nonspecific antibody or of a nonspecific exogenous protein (ovalbumin) also decreased the mobility of the injected cells beyond that of buffer-injected cells (to approximately 1 micron/min). These cells tended to recover endosomes more rapidly (approximately 25 min) than cells injected with antimyosin-II monoclonal antibodies. The inability of antibodies to myosin-II to inhibit completely any of the movements studied suggests that although myosin-II probably plays a role in these motilities, the cell either routinely uses or can draw upon another cytoplasmic motor to maintain locomotion, organelle movement, contractile vacuole activity, and endocytosis.

Acanthamoeba↗
PubMed1989

Characterization of renatured profilin purified by urea elution from poly-L-proline agarose columns.

We present evidence that native profilin can be purified from cellular extracts of Acanthamoeba, Dictyostelium, and human platelets by affinity chromatography on poly-L-proline agarose. After applying cell extracts and washing the column with 3 M urea, homogeneous profilin is eluted by increasing the urea concentration to 6-8 M. Acanthamoeba profilin-I and profilin-II can subsequently be separated by cation exchange chromatography. The yield of Acanthamoeba profilin is twice that obtained by conventional methods. Several lines of evidence show that the profilins fully renature after removal of the urea by dialysis: 1) dialyzed Acanthamoeba and human profilins rebind quantitatively to poly-L-proline and bind to actin in the same way as native, conventionally purified profilin without urea treatment; 2) dialyzed profilins form 3-D crystals under the same conditions as native profilins; 3) dialyzed Acanthamoeba profilin-I has an NMR spectrum identical with that of native profilin-I; and 4) dialyzed human and Acanthamoeba profilins inhibit actin polymerization. We report the discovery of profilin in Dictyostelium cell extracts using the same method. Based on these observations we conclude that urea elution from poly-L-proline agarose followed by renaturation will be generally useful for preparing profilins from a wide variety of cells. Perhaps also of general use is the finding that either myosin-II or alpha-actinin in crude cell extracts can be bound selectively to the poly-L-proline agarose column depending on the ionic conditions used to equilibrate the column. We have purified myosin-II from both Acanthamoeba and Dictyostelium cell extracts and alpha-actinin from Acanthamoeba cell extracts in the appropriate buffers. These proteins are retained as complexes with actin by the agarose and not by a specific interaction with poly-L-proline. They can be eluted by dissociating the complexes with ATP and separated from actin by gel filtration if necessary.

Acanthamoeba↗
PubMed1989

Location of the head-tail junction of myosin.

The tails of double-headed myosin molecules consist of an alpha-helical/coiled-coil structure composed of two identical polypeptides with a heptad repeat of hydrophobic amino acids that starts immediately after a conserved proline near position 847. Both muscle and nonmuscle myosins have this heptad repeat and it has been assumed that proline 847 is physically located at the head-tail junction. We present two lines of evidence that this assumption is incorrect. First, we localized the binding sites of several monoclonal antibodies on Acanthamoeba myosin-II both physically, by electron microscopy, and chemically, with a series of truncated myosin-II peptides produced in bacteria. These data indicate that the head-tail junction is located near residue 900. Second, we compared the lengths of two truncated recombinant myosin-II tails with native myosin-II. The distances from the NH2 termini to the tips of these short tails confirms the rise per residue (0.148 nm/residue) and establishes that the 86-nm tail of myosin-II must start near residue 900. We propose that the first 53 residues of heptad repeat of Acanthamoeba myosin-II and other myosins are located in the heads and the proteolytic separation of S-1 from rod occurs within the heads.

Acanthamoeba↗
PubMed1989

Purification and characterization of an Acanthamoeba nuclear actin-binding protein.

Immunolocalization of monoclonal antibodies to Acanthamoeba myosin I showed a cross-reactive protein in nuclei (Hagen, S. J., D. P. Kiehart, D. A. Kaiser, and T. D. Pollard. 1986. J. Cell Biol. 103:2121-2128). This protein is antigenically related to myosin I in that nine monoclonal antibodies and three polyclonal antibodies are cross-reactive. However, studies with affinity-purified antibodies and two-dimensional peptide maps show that the protein is not a proteolytic product of myosin I. We have used cell fractionation and column chromatography to purify this protein. It is a dimer of 34-kD polypeptides with a Stokes' radius of 4 nm. A polyclonal antisera generated against the purified protein confirms the nuclear localization seen with the cross-reactive monoclonal antibodies. The 34-kD protein binds actin filaments in an ATP-insensitive manner with a Kd of approximately 0.25 microM without cross-linking, severing, or capping. No ATPase activity was detected in the presence or absence of actin. It also binds to DNA. These unique properties suggest we have discovered a new class of actin-binding protein. We have given this protein the name NAB for "nuclear actin-binding" protein.

Acanthamoeba↗
PubMed1989

Acanthamoeba actin and profilin can be cross-linked between glutamic acid 364 of actin and lysine 115 of profilin.

Acanthamoeba profilin was cross-linked to actin via a zero-length isopeptide bond using carbodiimide. The covalently linked 1:1 complex was purified and treated with cyanogen bromide. This cleaves actin into small cyanogen bromide (CNBr) peptides and leaves the profilin intact owing to its lack of methionine. Profilin with one covalently attached actin CNBr peptide was purified by gel filtration followed by gel electrophoresis and electroblotting on polybase-coated glass-fiber membranes. Since the NH2 terminus of profilin is blocked, Edman degradation gave only the sequence of the conjugated actin CNBr fragment beginning with Trp-356. The profilin-actin CNBr peptide conjugate was digested further with trypsin and the cross-linked peptide identified by comparison with the tryptic peptide pattern obtained from carbodiimide-treated profilin. Amino-acid sequence analysis of the cross-linked tryptic peptides produced two residues at each cycle. Their order corresponds to actin starting at Trp-356 and profilin starting at Ala-94. From the absence of the phenylthiohydantoin-amino acid residues in specific cycles, we conclude that actin Glu-364 is linked to Lys-115 in profilin. Experiments with the isoforms of profilin I and profilin II gave identical results. The cross-linked region in profilin is homologous with sequences in the larger actin filament capping proteins fragmin and gelsolin.

Acanthamoeba↗
PubMed1989

The effect of heavy chain phosphorylation and solution conditions on the assembly of Acanthamoeba myosin-II.

At low ionic strength, Acanthamoeba myosin-II polymerizes into bipolar minifilaments, consisting of eight molecules, that scatter about three times as much light as monomers. With this light scattering assay, we show that the critical concentration for assembly in 50-mM KCl is less than 5 nM. Phosphorylation of the myosin heavy chain over the range of 0.7 to 3.7 P per molecule has no effect on its KCl dependent assembly properties: the structure of the filaments, the extent of assembly, and the critical concentration for assembly are the same. Sucrose at a concentration above a few percent inhibits polymerization. Millimolar concentrations of MgCl2 induce the lateral aggregation of fully formed minifilaments into thick filaments. Compared with dephosphorylated minifilaments, minifilaments of phosphorylated myosin have a lower tendency to aggregate laterally and require higher concentrations of MgCl2 for maximal light scattering. Acidic pH also induces lateral aggregation, whereas basic pH leads to depolymerization of the myosin-II minifilaments. Under polymerizing conditions, millimolar concentrations of ATP only slightly decrease the light scattering of either phosphorylated or dephosphorylated myosin-II. Barring further modulation of assembly by unknown proteins, both phosphorylated and dephosphorylated myosin-II are expected to be in the form of minifilaments under the ionic conditions existing within Acanthamoeba.

Acanthamoeba↗