Search PubMed⌕ Search

Biomedical subjects

T A Steitz

Publications and source records attributed to T A Steitz.

At least 37 records · Page 2Linked to original sources

Placement of protein and RNA structures into a 5 A-resolution map of the 50S ribosomal subunit.

We have calculated at 5.0 A resolution an electron-density map of the large 50S ribosomal subunit from the bacterium Haloarcula marismortui by using phases derived from four heavy-atom derivatives, intercrystal density averaging and density-modification procedures. More than 300 base pairs of A-form RNA duplex have been fitted into this map, as have regions of non-A-form duplex, single-stranded segments and tetraloops. The long rods of RNA crisscrossing the subunit arise from the stacking of short, separate double helices, not all of which are A-form, and in many places proteins crosslink two or more of these rods. The polypeptide exit channel was marked by tungsten cluster compounds bound in one heavy-atom-derivatized crystal. We have determined the structure of the translation-factor-binding centre by fitting the crystal structures of the ribosomal proteins L6, L11 and L14, the sarcin-ricin loop RNA, and the RNA sequence that binds L11 into the electron density. We can position either elongation factor G or elongation factor Tu complexed with an aminoacylated transfer RNA and GTP onto the factor-binding centre in a manner that is consistent with results from biochemical and electron microscopy studies.

Archaeal Proteins↗

Insights into editing from an ile-tRNA synthetase structure with tRNAile and mupirocin.

Isoleucyl-transfer RNA (tRNA) synthetase (IleRS) joins Ile to tRNA(Ile) at its synthetic active site and hydrolyzes incorrectly acylated amino acids at its editing active site. The 2.2 angstrom resolution crystal structure of Staphylococcus aureus IleRS complexed with tRNA(Ile) and Mupirocin shows the acceptor strand of the tRNA(Ile) in the continuously stacked, A-form conformation with the 3' terminal nucleotide in the editing active site. To position the 3' terminus in the synthetic active site, the acceptor strand must adopt the hairpinned conformation seen in tRNA(Gln) complexed with its synthetase. The amino acid editing activity of the IleRS may result from the incorrect products shuttling between the synthetic and editing active sites, which is reminiscent of the editing mechanism of DNA polymerases.

Acylation↗

Structural basis for initiation of transcription from an RNA polymerase-promoter complex.

Although the single-polypeptide-chain RNA polymerase from bacteriophage T7 (T7RNAP), like other RNA polymerases, uses the same mechanism of polymerization as the DNA polymerases, it can also recognize a specific promoter sequence, initiate new RNA chains from a single nucleotide, abortively cycle the synthesis of short transcripts, be regulated by a transcription inhibitor, and terminate transcription. As T7RNAP is homologous to the Pol I family of DNA polymerases, the differences between the structure of T7RNAP complexed to substrates and that of the corresponding DNA polymerase complex provides a structural basis for understanding many of these functional differences. T7RNAP initiates RNA synthesis at promoter sequences that are conserved from positions -17 to +6 relative to the start site of transcription. The crystal structure at 2.4 A resolution of T7RNAP complexed with a 17-base-pair promoter shows that the four base pairs closest to the catalytic active site have melted to form a transcription bubble. The T7 promoter sequence is recognized by interactions in the major groove between an antiparallel beta-loop and bases. The amino-terminal domain is involved in promoter recognition and DNA melting. We have also used homology modelling of the priming and incoming nucleoside triphosphates from the T7 DNA-polymerase ternary complex structure to explain the specificity of T7RNAP for ribonucleotides, its ability to initiate from a single nucleotide, and the abortive cycling at the initiation of transcription.

Bacteriophage T7↗

DnaB from Thermus aquaticus unwinds forked duplex DNA with an asymmetric tail length dependence.

DnaB helicase is a ring-shaped hexamer of 300 kDa that is essential for replication of the bacterial chromosome. The dnaB gene from Thermus aquaticus was isolated and cloned, and its gene product was expressed and purified to homogeneity. A helicase assay was developed, and optimal conditions for T. aquaticus DnaB activity were determined using a forked duplex DNA substrate. The activity required a hydrolyzable nucleoside triphosphate and both 5'- and 3'-single-stranded DNA tail regions. Under conditions of single enzymatic turnover, the lengths of the 5'- and 3'-single-stranded regions were varied, and 6-10 nucleotides of the 5'-single-stranded tail and 21-30 nucleotides of the 3'-single-stranded tail markedly stimulated the unwinding rate. These data suggest that DnaB from T. aquaticus interacts with both DNA single-stranded tails during unwinding and that a greater portion of the 3'-tail is in contact with the protein. Two models are consistent with these data. In one model, the 5'-single stranded region passes through the central hole of the DnaB ring, and the 3'-tail makes extensive contact with the outside of the protein. In the other model, the 3'-single-stranded region passes through the DnaB ring, and the outside of the protein contacts the 5'-tail.

Bacterial Proteins↗

Structures of normal single-stranded DNA and deoxyribo-3'-S-phosphorothiolates bound to the 3'-5' exonucleolytic active site of DNA polymerase I from Escherichia coli.

The interaction of a divalent metal ion with a leaving 3' oxygen is a central component of several proposed mechanisms of phosphoryl transfer. In support of this are recent kinetic studies showing that thiophilic metal ions (e.g., Mn2+) stimulate the hydrolysis of compounds in which sulfur takes the place of the leaving oxygen. To examine the structural basis of this phenomenon, we have solved four crystal structures of single-stranded DNA's containing either oxygen or sulfur at a 3'-bridging position bound in conjunction with various metal ions at the 3'-5' exonucleolytic active site of the Klenow fragment (KF) of DNA polymerase I from Escherichia coli. Two structures of normal ssDNA bound to KF in the presence of Zn2+ and Mn2+ or Zn2+ alone were refined at 2.6- and 2.25-A resolution, respectively. They serve as standards for comparison with other Mn2+- and Zn2+-containing structures. In these cases, Mn2+ and Zn2+ bind at metal ion site B in a nearly identical position to Mg2+ (Brautigam and Steitz (1998) J. Mol. Biol. 277, 363-377). Two structures of KF bound to a deoxyoligonucleotide that contained a 3'-bridging sulfur at the scissile phosphate were refined at 2.03-A resolution. Although the bridging sulfur compounds bind in a manner very similar to that of the normal oligonucleotides, the presence of the sulfur changes the metal ion binding properties of the active site such that Mn2+ and Zn2+ are observed at metal ion site B, but Mg2+ is not. It therefore appears that the ability of the bridging sulfur compounds to exclude nonthiophilic metal ions from metal ion site B explains the low activity of KF exonuclease on these substrates in the presence of Mg2+ (Curley et al. (1997) J. Am. Chem. Soc. 119, 12691-12692) and that the 3'-bridging atom of the substrate is influencing the binding of metal ion B prior to catalysis.

Binding Sites↗

Comparison of the crystal and solution structures of two RNA oligonucleotides.

Until recently, there were no examples of RNAs whose structures had been determined by both NMR and x-ray crystallography, and thus there was no experimental basis for assessing the accuracy of RNA solution structures. A comparison of the solution and the crystal structures of two RNAs is presented, which demonstrates that NMR can produce solution structures that resemble crystal structures and thus validates the application to RNA of a methodology developed initially for the determination of protein conformations. Models for RNA solution structures are appreciably affected by the parameters used for their refinement that describe intramolecular interactions. For the RNAs of interest here, the more realistic those parameters, the greater the similarity between solution structures and crystal structures.

Base Sequence↗

Structural elucidation of the binding and inhibitory properties of lanthanide (III) ions at the 3'-5' exonucleolytic active site of the Klenow fragment.

BACKGROUND: Biochemical and biophysical experiments have shown that two catalytically essential divalent metal ions (termed 'A' and 'B') bind to the 3'-5' exonuclease active site of the Klenow fragment (KF) of Escherichia coli DNA polymerase I. X-ray crystallographic studies have established the normal positions in the KF 3'-5' exonuclease (KF exo) active site of the two cations and the single-stranded DNA substrate. Lanthanide (III) luminescence studies have demonstrated, however, that only a single europium (III) ion (Eu3+) binds to the KF exo active site. Furthermore, Eu3+ does not support catalysis by KF exo or several other two-metal-ion phosphoryl-transfer enzymes. RESULTS: A crystal structure of KF complexed with both Eu3+ and substrate single-stranded oligodeoxynucleotide shows that a lone Eu3+ is bound near to metal-ion site A. Comparison of this structure to a relevant native structure reveals that the bound Eu3+ causes a number of changes to the KF exo active site. The scissile phosphate of the substrate is displaced from its normal position by about 1 A when Eu3+ is bound and the presence of Eu3+ in the active site precludes the binding of the essential metal ion B. CONCLUSIONS: The substantial, lanthanide-induced differences in metal-ion and substrate binding to KF exo account for the inhibition of this enzyme by Eu3+. These changes also explain the inability of KF exo to bind more than one cation in the presence of lanthanides. The mechanistic similarity between KF exo and other two-metal-ion phosphoryl-transfer enzymes suggests that the principles of lanthanide (III) ion binding and inhibition ascertained from this study will probably apply to most members of this class of enzymes.

Binding Sites↗

Crystal structure of the ribosomal RNA domain essential for binding elongation factors.

The structure of a 29-nucleotide RNA containing the sarcin/ricin loop (SRL) of rat 28 S rRNA has been determined at 2.1 A resolution. Recognition of the SRL by elongation factors and by the ribotoxins, sarcin and ricin, requires a nearly universal dodecamer sequence that folds into a G-bulged cross-strand A stack and a GAGA tetraloop. The juxtaposition of these two motifs forms a distorted hairpin structure that allows direct recognition of bases in both grooves as well as recognition of nonhelical backbone geometry and two 5'-unstacked purines. Comparisons with other RNA crystal structures establish the cross-strand A stack and the GNRA tetraloop as defined and modular RNA structural elements. The conserved region at the top is connected to the base of the domain by a region presumed to be flexible because of the sparsity of stabilizing contacts. Although the conformation of the SRL RNA previously determined by NMR spectroscopy is similar to the structure determined by x-ray crystallography, significant differences are observed in the "flexible" region and to a lesser extent in the G-bulged cross-strand A stack.

Animals↗

A 1.3-A resolution crystal structure of the HIV-1 trans-activation response region RNA stem reveals a metal ion-dependent bulge conformation.

The crystal structure of an HIV-1 trans-activation response region (TAR) RNA fragment containing the binding site for the trans-activation protein Tat has been determined to 1.3-A resolution. In this crystal structure, the characteristic UCU bulge of TAR adopts a conformation that is stabilized by three divalent calcium ions and differs from those determined previously by solution NMR. One metal ion, crucial to the loop conformation, binds directly to three phosphates in the loop region. The structure emphasizes the influence of metal ion binding on RNA structure and, given the abundance of divalent metal ion in the cell, raises the question of whether metal ions play a role in the conformation of TAR RNA and the interaction of TAR with Tat and cyclin T in vivo.

Base Sequence↗

The structure of HIV-1 reverse transcriptase complexed with an RNA pseudoknot inhibitor.

Small RNA pseudoknots, selected to bind human immunodeficiency virus type 1 (HIV-1) reverse transcriptase tightly, are potent inhibitors of reverse transcriptase. The co-crystal structure of reverse transcriptase complexed with a 33 nucleotide RNA pseudoknot has been determined by fitting the ligand into a high quality, 4-fold averaged 4.8 A resolution electron density map. The RNA is kinked between stems S1 and S2, thereby optimizing its contacts with subunits of the heterodimer. Its binding site extends along the cleft that lies between the polymerase and RNase H active sites, partially overlaps with that observed for duplex DNA and presumably overlaps some portion of the tRNA site. Stem S2 and loop L1 stabilize the 'closed' conformation of the polymerase through extensive electrostatic interactions with several basic residues in helix I of the p66 thumb and in the p66 fingers domain. Presumably, this RNA ligand inhibits reverse transcriptase by binding to a site that partly overlaps the primer-template binding site.

Crystallization↗

Structure of T7 RNA polymerase complexed to the transcriptional inhibitor T7 lysozyme.

The T7 RNA polymerase-T7 lysozyme complex regulates phage gene expression during infection of Escherichia coli. The 2.8 A crystal structure of the complex reveals that lysozyme binds at a site remote from the polymerase active site, suggesting an indirect mechanism of inhibition. Comparison of the T7 RNA polymerase structure with that of the homologous pol I family of DNA polymerases reveals identities in the catalytic site but also differences specific to RNA polymerase function. The structure of T7 RNA polymerase presented here differs significantly from a previously published structure. Sequence similarities between phage RNA polymerases and those from mitochondria and chloroplasts, when interpreted in the context of our revised model of T7 RNA polymerase, suggest a conserved fold.

Amino Acid Sequence↗

A 9 A resolution X-ray crystallographic map of the large ribosomal subunit.

The 50S subunit of the ribosome catalyzes the peptidyl-transferase reaction of protein synthesis. We have generated X-ray crystallographic electron density maps of the large ribosomal subunit from Haloarcula marismortui at various resolutions up to 9 A using data from crystals that diffract to 3 A. Positioning a 20 A resolution EM image of these particles in the crystal lattice produced phases accurate enough to locate the bound heavy atoms in three derivatives using difference Fourier maps, thus demonstrating the correctness of the EM model and its placement in the unit cell. At 20 A resolution, the X-ray map is similar to the EM map; however, at 9 A it reveals long, continuous, but branched features whose shape, diameter, and right-handed twist are consistent with segments of double-helical RNA that crisscross the subunit.

Crystallography, X-Ray↗

How glutaminyl-tRNA synthetase selects glutamine.

BACKGROUND: Aminoacyl-tRNA synthetases covalently link a specific amino acid to the correct tRNA. The fidelity of this reaction is essential for accurate protein synthesis. Each synthetase has a specific molecular mechanism to distinguish the correct pair of substrates from the pool of amino acids and isologous tRNA molecules. In the case of glutaminyl-tRNA synthetase (GlnRS) the prior binding of tRNA is required for activation of glutamine by ATP. A complete understanding of amino acid specificity in GlnRS requires the determination of the structure of the synthetase with both tRNA and substrates bound. RESULTS: A stable glutaminly-adenylate analog, which inhibits GlnRS with a Ki of 1.32 microM, was synthesized and cocrystallized with GlnRS and tRNA2Gln. The crystal structure of this ternary complex has been refined at 2.4 A resolution and shows the interactions made between glutamine and its binding site. CONCLUSIONS: To select against glutamic acid or glutamate, both hydrogen atoms of the nitrogen of the glutamine sidechain are recognized. The hydroxyl group of Tyr211 and a water molecule are responsible for this recognition; both are obligate hydrogen-bond acceptors due to a network of interacting sidechains and water molecules. The prior binding of tRNAGln that is required for amino acid activation may result from the terminal nucleotide, A76, packing against and orienting Tyr211, which forms part of the amino acid binding site.

Adenosine Triphosphate↗

Structural principles for the inhibition of the 3'-5' exonuclease activity of Escherichia coli DNA polymerase I by phosphorothioates.

A two-metal-ion catalytic mechanism has previously been proposed for several phosphoryl-transfer enzymes. In order to extend the structural basis of this mechanism, crystal structures of three single-stranded DNA substrates bound to the 3'-5' exonucleolytic active site of the large fragment of DNA polymerase I from Escherichia coli have been elucidated. The first is a 2.1 A resolution structure of a Michaelis complex between the large fragment (or Klenow fragment, KF) and a single-stranded DNA substrate, stabilized by low pH and flash-freezing. The positions and identities of the catalytic metal ions, a Zn2+ at site A and a Mg2+ at site B, have been clearly established. The structural and kinetic consequences of sulfur substitutions in the scissile phosphate have been explored. A complex with the Rp isomer of phosphorothioate DNA, refined at 2.2 A resolution, shows Zn2+ bound to both metal sites and a mispositioning of the substrate and attacking nucleophile. The complex with the Sp phosphorothioate at 2. 3 A resolution reveals that metal ions do not bind in the active site, having been displaced by a bulky sulfur atom. Steady-state kinetic experiments show that catalyzed hydrolysis of the Rp isomer was reduced only about 15-fold, while no enzyme activity could be detected with the Sp phosphorothioate, consistent with the structural observations. Furthermore, Mn2+ could not rescue the activity of the exonuclease on the Sp phosphorothioate. Taken together, these studies confirm and extend the proposed two-metal-ion exonuclease mechanism and provide a structural context to explain the effects of sulfur substitutions on this and other phosphoryl-transfer enzymes. These experiments also suggest that the possibility of metal-ion exclusion be taken into account when interpreting the results of Mn2+ rescue experiments.

Catalysis↗

Structural and functional insights provided by crystal structures of DNA polymerases and their substrate complexes.

New levels in the understanding of DNA replication have been achieved from recent crystal structure determinations of several DNA polymerases and their substrate complexes. The structure of an alpha family DNA polymerase from bacteriophage RB69 shows some similarities, but also considerable differences in structure and organization from the pol I family DNA polymerases. Also, the functions of three polymerase domains and their conserved residues have been clarified by studying structures of pol I family DNA polymerases complexed to their substrates. These structures also confirm that an identical two-metal ion catalytic mechanism proposed previously is used by both the nonhomologous pol I and pol beta family DNA polymerases.

Amino Acid Sequence↗