Search PubMed⌕ Search

Biomedical subjects

T A Horbett

Publications and source records attributed to T A Horbett.

69 records · Page 4Linked to original sources

Adsorption of proteins from plasma to a series of hydrophilic-hydrophobic copolymers. I. Analysis with the in situ radioiodination technique.

The adsorption of proteins affects cellular interactions with foreign surfaces and thus plays an important role in determining the biocompatibility of implants. Previous studies have indicated differences in the affinity of various proteins for a given polymer, and differences in the affinity of fibrinogen for a series of polymers varying in hydrophilicity. These studies suggest that differences in the composition of the protein layer adsorbed to polymers from plasma might exist. To examine this hypothesis, the proteins adsorbed from plasma to a series of polymers varying in hydrophilicity were analyzed with the iodogram technique. Copolymers of hydroxyethyl methacrylate and ethyl methacrylate made by the radiation grafting technique were exposed to plasma for 0.5 or 150 min. The adsorbed proteins were iodinated, eluted with SDS, and separated with polyacrylamide gel electrophoresis. Fibrinogen, immunoglobulin G, hemoglobin, and a peak tentatively ascribed to prothrombin were the major proteins detected. Very little iodine was incorporated into adsorbed albumin, even though it was shown to be present by a separate experiment using dye binding. The fraction of total radioactivity associated with each of nine proteins was found to vary markedly and systematically among the surfaces. The distribution of radioactivity into the proteins was very different on 0.5 and 150-min plasma exposed polymers. The results reflect both compositional differences in the adsorbed protein layer on the polymers and differences in the accessibility of proteins to the labeling reagent in the adsorbed state. Differences in the organization of the adsorbed protein layer may play a key role in determining whether cell surface receptors can come in contact with the specific plasma protein able to further stimulate the cell.

Adsorption↗

Adsorption of proteins from plasma to a series of hydrophilic-hydrophobic copolymers. II. Compositional analysis with the prelabeled protein technique.

Plasma protein adsorption is an important initial event in the response of tissue to foreign materials. Little is known about the way in which the chemical properties of materials influence the nature of the adsorbed layer and thus the later cellular responses. In this study, the amounts of fibrinogen, immunoglobulin G, albumin, and hemoglobin adsorbed from plasma to a series of HEMA-EMA random copolymers varying in hydrophilicity was measured. The adsorption of each protein varied in a characteristic way with copolymer composition probably reflecting a different affinity of the proteins for the various copolymers. A complex variation in the composition of the adsorbed protein layer on polymers varying in hydrophilicity was thus evident. Surface enrichment of the proteins, calculated as the ratio of the surface and bulk fraction of each protein, also varied with copolymer composition, and indicated substantial differences in the composition of the surface and bulk phases. Surface area variations among the copolymers, preferential adsorption of 125I proteins, and the possibility of structural degradation of 1,25I proteins in plasma were investigated but did not appear to influence the adsorption results. The ability of polymers to fractionate plasma proteins and concentrate them at their surface is concluded to be a key factor in the complex processes which determine the compatibility of polymers in vivo.

Adsorption↗

The reactivity of alpha-chymotrypsin immobilized on radiation-grafted hydrogel surfaces.

The enzymatic activity of alpha-chymotrypsin (CT), immobilized on hydrogel-coated polymer film supports, has been investigated. The support was prepared by radiation-graft copolymerization of 2-hydroxyethyl methacrylate (HEMA) and methacrylic acid (MAAc) on silicone rubber films. The enzyme was covalently coupled to the carboxylic group of MAAc via the N-hydroxysuccinimide (NHS) ester active intermediate. Increasing MAAc contents of the hydrogel resulted in increased attachment of CT. The integrity of the CT active site after attachment was assessed by an active site titration with diisopropyl fluorophosphate (DFP). As the MAAc content of the hydrogel was increased, an increasing fraction of the attached CT retained its activity to DFP. A greater fraction of CT was active towards DFP when adsorbed than when coupled. The rates of hydrolysis of some synthetic model substrates by the immobilized CT were also measured. The negative charge on the hydrogel had a large effect on the rates of these hydrolyses. The pH optimum for the hydrolysis of N-acetyl-L-tyrosine ethyl ester (ATEE) by immobilized CT was higher than that of free CT. Increasing MAAc content of the hydrogel resulted in larger shifts in the pH optimum. The maximum rates of ATEE hydroylsis per mg CT declined sharply with increasing MAAc content of the hydrogel. This is probably related to the increasing repulsive force between the ATEE (negatively charged above congruent to pH 9.5) and the hydrogel with increasing MAAc content. The activity of immobilized CT to ATEE is small compared to that of free CT, partly due to this charge effect. Conversely, the rate of hydrolysis of BAEE, a positively charged substrate, by immobilized CT at pH 11, is almost fourfold greater than that by free CT at its pH optimum.

Adsorption↗

The preferential adsorption of hemoglobin to polyethylene.

Hemoglobin adsorption to foreign surfaces has not previously been considered in studies of blood-material interactions, despite the fact that hemoglobin is the most abundant protein present in blood. A hemoglobin-like protein was detected on a number of surfaces exposed to blood plasma, serum, and red cell suspensions. Hemoglobin adsorption to polyethylene from plasma was found to approximately equal the amount of adsorption of albumin and fibrinogen. The high relative affinity of hemoglobin for polyethylene was further confirmed by adsorption isotherm and direct competition experiments. The data from all four experimental methods support the following ranking of plasma protein affinity for polyethylene: Hemoglobin greater than fibrinogen greater than albumin congruent to gamma-globulin.

Adsorption↗

A new method for analysis of the adsorbed plasma protein layer on biomaterial surfaces.

The composition and dynamics of the protein film adsorbed onto surfaces from blood plasma remains unknown to biomaterials development. In situ radioiodination followed by elution and electrophoretic analysis has been demonstrated as a sensitive and versatile technique for analysis of these films. Iodine-125I was incorporated into protein using iodine monochloride. After film washing, and elution with sodium dodecylsulfate (SDS), proteins were subject to SDS gel electrophoresis for MW determination. Disulfide bond reduction with dithiothreitol was also employed to detect the presence of protein subunits. Fibrinogen, albumin and IgG were readily identified when adsorbed from a single protein solution onto teflon or silicone rubber. Electrophoretic analysis of the protein layer adsorbed from plasma revealed a complex pattern of up to 8 iodinated protein species. Iodinated protein with electrophoretic behavior consistent with fibrinogen and albumin was always found after plasma exposure, but proteins of apparent MW 7-10,000; 12,000; 25,000 and others remain unidentified. Adsorbed protein patterns varied with plasma source, type of material, and time of plasma exposure.

Adsorption↗

Fibrinogen adsorption to receptor-like biomaterials made by pre-adsorbing peptides to polystyrene substrates.

Two peptides from the ligand-binding site of the platelet receptor GPIIb/IIIa, residues 296-306 of GPIIb, designated B12 by D'Souza et al. (1991), and 300-311 of GPIIb, designated G13 by Taylor et al., (1992), as well as two control peptides, designated C14 and C20, were adsorbed to treated polystyrene substrates. Fibrinogen adsorption to the peptide-coated substrates was characterized. The specificity of I-125 labeled fibrinogen binding to the peptide-coated substrates was investigated by measuring the amount of fibrinogen adsorbed to each substrate and the inhibition of fibrinogen binding by RGDS peptide, bovine serum albumin, a divalent ion chelator (ethylene diamine tetra-acetic acid disodium salt), unlabeled fibrinogen and the B12 peptide. The results show that non-specific binding of fibrinogen to the B12-coated substrate is predominant under most conditions. Binding of monoclonal antibodies to fibrinogen adsorbed to the peptide coated substrates was characterized. The failure of several antibodies to bind fibrinogen adsorbed to the B12 substrate suggested that adsorption of fibrinogen to the B12-coated substrate alters its conformation relative to fibrinogen adsorbed to the bare substrate.

Adsorption↗

Rat peritoneal macrophage adhesion to hydroxyethyl methacrylate-ethyl methacrylate copolymers and hydroxystyrene-styrene copolymers.

Macrophage adhesion to a wide variety of substrates has been measured, but no systematic study of the influence of specific substrate chemical properties on adhesion is available. These studies were conducted using two series of materials, copolymers of hydroxyethyl methacrylate (HEMA) and ethyl methacrylate (EMA) and copolymers of hydroxystyrene and styrene, to determine the effect of a single chemical property, polar character, on adhesion. Rat peritoneal macrophages were allowed to contact polymer substrates for periods ranging from 1 to 240 min before being subjected to a shear stress of 60-120 dynes/cm2 in a thin-channel flow cell. Percentage adhesion was calculated from the number of cells that remained adherent to the substrate after 30 s of applied shear stress. Macrophages remained adherent to 100% EMA and all hydroxystyrene-styrene copolymer surfaces after only 1 min of contact. In copolymers of the HEMA-EMA series, the time required to attain peak adhesion levels increased with increasing substrate hydrophilicity (increasing HEMA content). Cells did not attach to the 20% EMA/80% HEMA copolymer and the 100% HEMA polymer. The results demonstrate that there is a time delay between contact and adhesion of the cells to surfaces of increasing hydrophilicity within the HEMA-EMA series and no time delay with the hydroxystyrene-styrene series. The time delay is thought to be a function of the excluded volume provided by polymers that are able to undergo significant chain rotation and or swelling in the solvent, water. Small excluded volumes present in copolymers of high EMA content and all hydroxystyrene-styrene copolymers offer little or no resistance to formation of adhesive bonds by macrophages, whereas copolymers with large excluded volumes (high HEMA content) prevent contact and/or adhesion. A mechanism based on the net excluded volumes of both the cell and substrate surface macromolecule is proposed to explain this phenomenon.

Animals↗

Glucose-sensitive membranes containing glucose oxidase: activity, swelling, and permeability studies.

The development of membranes that swell in response to glucose is reported. The membranes may prove to be useful in glucose monitoring or glucose-dependent insulin delivery. The polymers were synthesized by the radiation-induced polymerization of frozen solutions containing hydroxyethylmethacrylate, N,N-dimethylaminoethyl methacrylate, tetraethylene glycol dimethacrylate, ethylene glycol, water, and glucose oxidase. The polymers were hydrogels, with water contents in the range of 60-90%, depending on the pH or glucose concentration. Changes in swelling and permeability of the hydrogel were caused by exposure to glucose solutions. The gluconic acid formed by the glucose oxidase catalyzed oxidation of glucose in the membrane lowered the pH of the system and thus caused the changes in the membrane. The retention of enzyme activity by the membranes in vitro and in vivo is also reported. The large differences in properties among membranes made with different chemical formulations suggest that glucose-sensitive membranes with performance characteristics needed for an artificial pancreas may be an achievable goal.

Acrylates↗

The kinetics of baboon fibrinogen adsorption to polymers: in vitro and in vivo studies.

Fibrinogen adsorption on polymers from blood may mediate or potentiate thrombosis because of its involvement in both the intrinsic clotting system and the formation of platelet aggregates. While the kinetics of fibrinogen adsorption from plasma in vitro have previously been found to be very different on polar and nonpolar surfaces [T. A Horbett, "The kinetics of adsorption of plasma proteins to a series of hydrophilic-hydrophobic copolymers," ACS Org. Coat. Plas. Chem. 40, 642-646 (1979)] the significance of this difference with respect to thrombogenesis in vivo has not been clarified. In this study, the kinetics of deposition of baboon 125I fibrinogen from plasma in vitro or from blood in vivo on a series of polymers was measured. The polymers chosen for this study had previously been found to have a large range in surface polarity and reactivity in the in vivo baboon shunt model. The kinetics of fibrinogen adsorption in vitro were observed to be of three types, depending on the polymer: high initial adsorption decreasing to a lower steady state value; constant throughout the time course; low initial adsorption rising steadily to a plateau value. In vivo, fibrinogen deposition kinetics were of two types: low, constant deposition throughout the time course, independent of heparinization; low deposition initially followed by a second phase of greatly increased deposition (probably as fibrin) which was prevented or greatly decreased by heparinizing the animals. Polymers for which fibrinogen adsorption increased to a plateau in vitro were found to have a heparin inhibitable second phase of enhanced in vivo fibrinogen deposition. These polymers also have been found in previous studies to enhance the rate of platelet destruction when used as in vivo shunts on baboons. Conversely, most polymers with high initial in vitro fibrinogen adsorption followed by a decrease had low fibrinogen deposition behavior in vivo and were also minimally destructive of platelets. The adsorption kinetics of fibrinogen to polymers from blood in vivo and in vitro and the consumption of platelets in vivo induced by the polymers all vary with polymer polarity. More polar polymers had in vitro fibrinogen kinetics characterized by a rise to a plateau, in vivo fibrinogen deposition characterized by a second stage of great increase inhibitable by heparin, and enhanced platelet consumption. The correlation of three separate indicators of surface thrombogenicity with surface polarity suggests that more polar materials may be more thrombogenic because of an influence on the way in which fibrinogen interacts with these surfaces.

Adsorption↗