Biomedical subjects

Sridhar Krishnaswamy

Publications and source records attributed to Sridhar Krishnaswamy.

6 recordsLinked to original sources

PubMed2006

Bulk-wave and guided-wave photoacoustic evaluation of the mechanical properties of aluminum/silicon nitride double-layer thin films.

The development of devices made of micro- and nano-structured thin film materials has resulted in the need for advanced measurement techniques to characterize their mechanical properties. Photoacoustic techniques, which use pulsed laser irradiation to nondestructively induce very high frequency ultrasound in a test object via rapid thermal expansion, are suitable for nondestructive and non-contact evaluation of thin films. In this paper, we compare two photoacoustic techniques to characterize the mechanical parameters of edge-supported aluminum and silicon nitride double-layer thin films. The elastic properties and residual stresses in such films affect their mechanical performance. In a first set of experiments, a femtosecond transient pump-probe technique is used to investigate the Young's moduli of the aluminum and silicon nitride layers by launching ultra-high frequency bulk acoustic waves in the films. The measured transient signals are compared with simulated transient thermoelastic signals in multi-layer structures, and the elastic moduli are determined. Independent pump-probe tests on silicon substrate-supported region and unsupported region are in good agreement. In a second set of experiments, dispersion curves of the A(0) mode of the Lamb waves that propagate along the unsupported films are measured using a broadband photoacoustic guided-wave method. The residual stresses and flexural rigidities for the same set of double-layer membranes are determined from these dispersion curves. Comparisons of the results obtained by the two photoacoustic techniques are made and discussed.

Acoustics↗

PubMed2006

Adaptive demodulation of dynamic signals from fiber Bragg gratings using two-wave mixing technology.

A two-wave mixing (TWM) interferometer using photorefractive (PRC) InP:Fe crystal is configured to demodulate the spectral shift of a fiber Bragg grating (FBG) sensor. The FBG is illuminated with a broadband source, and any strain in the FBG is encoded as a wavelength shift of the light reflected by the FBG. The wavelength shift is converted into phase shift by means of an unbalanced TWM interferometer. TWM wavelength demodulation is attractive for monitoring dynamic strains because it is adaptive and multiplexable. Adaptivity implies that it can selectively monitor dynamic strains without active compensation of large quasi-static strains and large temperature drifts that otherwise would cause system to drift. Multiplexability implies that several FBG sensors can be simultaneously demodulated using a single demodulator. TWM wavelength demodulation is therefore a cost-effective method of demodulating several spectrally encoded FBG sensors.

Journal Article↗

PubMed2004

Interaction of a scanning laser-generated ultrasonic line source with a surface-breaking flaw.

The scanning laser source (SLS) technique has been proposed recently as an effective way to investigate small surface-breaking cracks. By monitoring the amplitude and frequency changes of the ultrasound generated as the SLS scans over a defect, the SLS technique has provided enhanced signal-to-noise performance compared to the traditional pitch-catch or pulse-echo ultrasonic methods. In previous work, either a point source or a short line source was used for generation of ultrasound. The resulting Rayleigh wave was typically bipolar in nature. In this paper, a scanning laser line source (SLLS) technique using a true thermoelastic line source (which leads to generation of monopolar surface waves) is demonstrated experimentally and through numerical simulation. Experiments are performed using a line-focused Nd:YAG laser and interferometric detection. For the numerical simulation, a hybrid model combining a mass-spring lattice method (MSLM) and a finite difference method (FDM) is used. As the SLLS is scanned over a surface-breaking flaw, it is shown both experimentally and numerically that the monopolar Rayleigh wave becomes bipolar, dramatically indicating the presence of the flaw.

Journal Article↗

PubMed2002

Photoacoustic probes for nondestructive testing and biomedical applications.

Fiber-optic photoacoustic sources for nondestructive testing and biomedical applications are described. The photoacoustic sources consist of a pulsed laser, a fiber-optic cable, and a generation head. The generation head is a miniature hermetically sealed chamber, which can be embedded into solid structures or immersed in liquid media. The face of the chamber acts as a target for laser irradiation. Bulk ultrasonic waves generated inside of the target are transmitted into the medium. The proposed systems offer wide ultrasonic range (0.5-15 MHz), easy control over directivity of the ultrasonic beam, high efficiency of generation, and the ability to operate in a harsh environment. Sources with different radiation patterns with respect to the optical axis of the fiber, such as normal, sideways, as well as focused, have been devised. We present a proof-of-concept experiment using these sources in combination with fiber-optic ultrasonic receivers.

Equipment Design↗

PubMed2002

Intrinsic fiber-optic ultrasonic sensor array using multiplexed two-wave mixing interferometry.

An intrinsic multiplexed laser interferometer is presented that allows for the simultaneous detection of acoustic waves by an array of fiber-optic sensors. The phase-modulated signals from each sensor are demodulated by use of an adaptive two-wave mixing setup. The light from each sensing fiber in the array is mixed with a reference beam in a single photorefractive crystal (PRC), and the output beams from the PRC are imaged onto separate photodetectors to create a multiplexed two-wave mixing (MTWM) system. The sensing fibers are embedded in graphite-epoxy composite panels, and detection of both acoustic emission and ultrasonic signals in these materials is demonstrated. The intrinsic MTWM system is an effective tool for the simultaneous demodulation of signals from a large fiber sensor array. Also, the adaptive nature of the MTWM setup obviates the need for active stabilization against ambient noise.

Journal Article↗

PubMed2002

Mass spring lattice modeling of the scanning laser source technique.

The scanning laser source (SLS) technique is a promising new laser ultrasonic tool for the detection of small surface-breaking defects. The SLS approach is based on monitoring the changes in laser generated ultrasound as a laser source is scanned over a defect. Changes in amplitude and frequency content have been observed for ultrasound generated by the laser over uniform and defective areas. In this paper, the SLS technique is simulated numerically using the mass spring lattice model. Thermoelastic laser generation of ultrasound in an elastic material is modeled using a shear dipole distribution. The spatial and temporal energy distribution profiles of typical pulsed laser sources are used to model the laser source. The amplitude and spectral variations in the laser generated ultrasound as the SLS scans over a large aluminum block containing a small surface-breaking crack are observed. The experimentally observed SLS amplitude and spectral signatures are shown to be captured very well by the model. In addition, the possibility of utilizing the SLS technique to size surface-breaking cracks that are sub-wavelength in depth is explored.

Aluminum↗