Biomedical subjects

Shiqi Zhou

Publications and source records attributed to Shiqi Zhou.

16 recordsLinked to original sources

PubMed2006

Formalism for calculation of polymer-solvent-mediated potential.

A simple theoretical approach is proposed for calculation of a solvent-mediated potential (SMP) between two colloid particles immersed in a polymer solvent bath in which the polymer is modeled as a chain with intramolecular degrees of freedom. The present recipe is only concerned with the estimation of the density profile of a polymer site around a single solute colloid particle instead of two solute colloid particles separated by a varying distance as done in existing calculational methods for polymer-SMP. Therefore the present recipe is far simpler for numerical implementation than the existing methods. The resultant predictions for the polymer-SMP and polymer solvent-mediated mean force (polymer-SMMF) are in very good agreement with available simulation data. With the present recipe, change tendencies of the contact value and second virial coefficiency of the SMP as a function of size ratio between the colloid particle and polymer site, the number of sites per chain, and the polymer concentration are investigated in detail. The metastable critical polymer concentration as a function of size ratio and the number of sites per chain is also reported for the first time. To yield the numerical solution of the present recipe at less than on a personal computer, a rapid and accurate algorithm for the numerical solution of the classical density functional theory is proposed to supply rapid and accurate estimation of the density profile of the polymer site as an input into the present formalism.

Journal Article↗

PubMed2006

How to extend hard sphere density functional approximation to nonuniform nonhard sphere fluids: applicable to both subcritical and supercritical temperature regions.

A methodology for the formulation of density functional approximation (DFA) for nonuniform nonhard sphere fluids is proposed by following the spirit of a partitioned density functional approximation [Zhou, Phys. Rev. E 68, 061201 (2003)] and mapping the hard core part onto an effective hard sphere whose high order part of the functional perturbation expansion is treated by existing hard sphere DFAs. The resultant density functional theory (DFT) formalism only needs a second order direct correlation function and pressure of the corresponding coexistence bulk fluid as inputs and therefore can be applicable to both supercritical and subcritical temperature cases. As an example, an adjustable parameter-free version of a recently proposed Lagrangian theorem-based DFA is imported into the present methodology; the resultant DFA is applied to Lennard-Jones fluid under the influence of external fields due to a single hard wall, two hard walls separated by a small distance, a large hard sphere, and a spherical cavity with a hard wall. By comparing theoretical predictions with previous simulation data and those recently supplied for coexistence bulk fluid situated at "dangerous" regions, it was found that the present DFA can predict subtle structure change of the density profile and therefore is the most accurate among all existing DFT approaches. A detailed discussion is given as to why so excellent DFA for nonhard sphere fluids can be drawn forth from the present methodology and how the present methodology differs from previous ones. The methodology can be universal, i.e., it can be combined with any other hard sphere DFAs to construct DFA for other nonhard sphere fluids with a repulsive core.

Journal Article↗

PubMed2006

Further test of third order + second-order perturbation DFT approach: hard core repulsive Yukawa fluid subjected to diverse external fields.

Grand canonical Monte Carlo simulation is used to investigate density profiles of hard-core repulsive Yukawa (HCRY) model fluid under the influence of various external fields and radial distribution function (RDF) of the bulk HCRY system. The aim of these extensive simulations is to provide exact data for purely repulsive interaction potential against which the validity of a third order + second-order perturbation DFT approach can be tested. It is found that a semiempirical parametrized bridge function due to Malijevsky and Labik performs very well for the RDF of the bulk HCRY fluid. Incorporation of a bulk second-order direct correlation function (DCF) of the HCRY fluid based on the Malijevsky-Labik bridge function into the third order + second-order perturbation DFT approach yields the resulting theoretical predictions for the density profiles of inhomogeneous HCRY fluid that are in a very good agreement with the simulation data, an exception being somewhat larger deviations appearing for the structure of the fluid around the center of a hard spherical cavity. Both theory and simulation predict layering transition and gas-liquid coexistence phenomena occurring with the HCRY model fluid under confined conditions. For the case of an inverse sixth-power repulsive potential under the influence of a flat stationary wall defined by an inverse twelfth-power repulsive potential, the present third order + second-order perturbation DFT approach is found to be superior to several existing weighted density approximations (WDA) and partitioned WDA.

Journal Article↗

PubMed2006

Structure of inhomogeneous Lennard-Jones fluid near the critical region and close to the vapor-liquid coexistence curve: Monte Carlo and density-functional theory studies.

Results for the density profiles of the Lennard-Jones (LJ) fluid subjected to diverse external fields are presented for the Monte Carlo simulations within the grand canonical ensemble and for the third order and second order perturbation density-functional approximation (DFA). In all cases, the bulk LJ fluid in the particle reservoir to which the nonuniform fluid under consideration is connected, is at the conditions situated at "dangerous" regions of the phase diagram, i.e., near the critical temperature or close to the gas-liquid coexistence curve. It is found that the previously investigated third order and second order perturbation DFA for hard core attractive Yukawa fluid [J. Chem. Phys. 122, 064503 (2005)] can perform successfully also for the nonuniform LJ fluid only on the condition of high accuracy of the required bulk second order direct correlation function. The present report further indicates that the proposed third order and second order perturbation DFA is efficient and suitable for both supercritical and subcritical temperatures.

Journal Article↗

PubMed2006

Polymer density functional theory approach based on scaling second-order direct correlation function.

A second-order direct correlation function (DCF) from solving the polymer-RISM integral equation is scaled up or down by an equation of state for bulk polymer, the resultant scaling second-order DCF is in better agreement with corresponding simulation results than the un-scaling second-order DCF. When the scaling second-order DCF is imported into a recently proposed LTDFA-based polymer DFT approach, an originally associated adjustable but mathematically meaningless parameter now becomes mathematically meaningful, i.e., the numerical value lies now between 0 and 1. When the adjustable parameter-free version of the LTDFA is used instead of the LTDFA, i.e., the adjustable parameter is fixed at 0.5, the resultant parameter-free version of the scaling LTDFA-based polymer DFT is also in good agreement with the corresponding simulation data for density profiles. The parameter-free version of the scaling LTDFA-based polymer DFT is employed to investigate the density profiles of a freely jointed tangent hard sphere chain near a variable sized central hard sphere, again the predictions reproduce accurately the simulational results. Importance of the present adjustable parameter-free version lies in its combination with a recently proposed universal theoretical way, in the resultant formalism, the contact theorem is still met by the adjustable parameter associated with the theoretical way.

Journal Article↗

PubMed2006

Rapidly convergent procedure to solve the density profile equation in the classical density functional theory.

An efficient recursive procedure to solve the density profile equation in the classical density functional theory (DFT) using an inverse Broyden method is described. The present iterative procedure is free of calculation of the Jacobian matrix, and its inversion unavoidable for the well-known Newton-Raphson (NR) method and its variants. Numerical calculation indicates that only the approximate solution and iterative matrix of the lower bulk density case are employed as the corresponding initial guesses of the higher bulk density case, the present recursive procedure can converge quickly to the physical solution with an accuracy of epsilon = 10(-14); therefore, the procedure provides an efficient numerical algorithm for the theory in which acquirement of a density profile of high accuracy is a key step. Extensive numerical calculation shows the advantage of the present inverse Broyden method over Broyles' mixing procedure and a modified Powell hybrid algorithm (a variation of the NR method).

Journal Article↗

PubMed2006

Experimental evaluation of cyadox phototoxicity to Balb/c mouse skin.

BACKGROUND: Cyadox is a veterinary drug mainly used as an effective antimicrobial promoter in animal husbandry. It was reported that the other quinoxaline-1,4-dioxide compounds had phototoxicity, but only few data are reported on phototoxicity of cyadox. This study was performed to evaluate the phototoxicity of cyadox on skin. METHODS: Eighty mice were equally divided into eight groups. Five groups with ultraviolet A (UVA) irradiation for 2 h (21 J/cm2) were administered at doses of 0, 10, 50, 200 mg/kg cyadox and 50 mg/kg olaquindox, respectively, and others as controls without irradiation administered at doses of 0, 200 mg/kg cyadox and 50 mg/kg olaquindox, respectively. Drugs were administered by gavage once daily with a suspension in 0.8% carboxymethyl-cellulose for consecutive 4 days. After administration, a recovery period of 7 days was arranged. Histopathological examination of auricular skin was performed on days 5 and 12. Measurement of auricular thickness, gross pathology and erythema score were conducted once daily. RESULTS: Cyadox groups (200, 50 and 10 mg/kg) with irradiation had erythema and oedema of auricular skin with dose-response relationship, which gradually convalesced after dosing and irradiation ceased. Severe erythema, oedema and necrosis of auricles were observed on olaquindox group with irradiation. CONCLUSION: The phototoxicity of cyadox was mild and reversible, which demonstrated a good safety profile of cyadox in terms of phototoxicity.

Animals↗

PubMed2005

Extending the simple weighted density approximation for a hard-sphere fluid to a Lennard-Jones fluid II. Application.

A simple weighted density approximation (SWDA) was extended to nonuniform Lennard-Jones fluids by following the spirit of a partitioned density function theory [S. Zhou, Phys. Rev. E 68 (2003) 061201] and mapping the hard-core part onto an effective hard-sphere fluid whose higher order terms beyond the second order of the functional perturbation expansion are treated by the SWDA. The resultant DFT formalism performs well for Lennard-Jones fluids under the influence of diverse external fields. With the present DFT formalism, we investigate in detail the structure and adsorption properties of a low-density LJ gas in a spherical cavity with a wall consisting of hard-sphere or LJ particles. It was found that when the cavity wall exerts an attractive external potential on the LJ particles in the cavity, the excess adsorption decreases as the temperature increases, while when the cavity wall exerts a hard repulsive external potential on the LJ particles in the cavity, the excess adsorption increases as the temperature increases.

Journal Article↗

PubMed2005

Global and critical test of the perturbation density-functional theory based on extensive simulation of Lennard-Jones fluid near an interface and in confined systems.

The structure of a Lennard-Jones (LJ) fluid subjected to diverse external fields maintaining the equilibrium with the bulk LJ fluid is studied on the basis of the third-order+second-order perturbation density-functional approximation (DFA). The chosen density and potential parameters for the bulk fluid correspond to the conditions situated at "dangerous" regions of the phase diagram, i.e., near the critical temperature or close to the gas-liquid coexistence curve. The accuracy of DFA predictions is tested against the results of a grand canonical ensemble Monte Carlo simulation. It is found that the DFA theory presented in this work performs successfully for the nonuniform LJ fluid only on the condition of high accuracy of the required bulk second-order direct correlation function. The present report further indicates that the proposed perturbation DFA is efficient and suitable for both supercritical and subcritical temperatures.

Chemistry, Physical↗

PubMed2005

Isostructural solid-solid transitions in binary asymmetrical hard sphere system: based on solvent-mediated potential.

Size dependence is imparted onto a modified bridge functional, adopted for a recently proposed semi-analytical hard sphere reference system theory for calculation of solvent-mediated potential (SMP). The SMP for two large hard sphere particles immersed in a small hard sphere solvent bath predicted by the present improved version is in satisfactory agreement with the prediction from a theoretically based fitting formula. Isostructural solid-solid transitions in the binary asymmetrical hard sphere system are investigated based on a single-component macrofluid approximation combined with the improved version. It is found that the isostructural solid-solid transition appears when size asymmetry increases. The limiting asymmetry size ratio is near 1/8. As the size asymmetry increases, critical density for both large and small hard sphere components for the fcc isostructural solid-solid transition increases and decreases, respectively.

Journal Article↗

PubMed2005

Subchronic oral toxicity study with cyadox in Wistar rats.

To investigate the potential subchronic toxicity of cyadox, groups of 15 male and 15 female Wistar rats were fed with diets containing cyadox (0, 50, 150 or 2500 mg/kg) or olaquindox (150 mg/kg), approximately equivalent to cyadox 5, 15, 250 or olaquindox 15 mg/kg b.w./day, for 13 weeks. Five rats/sex/group were sacrificed on days 30, 60 and 90. No test-material-related changes were seen in mortality, clinical signs, hematology, clinical chemistry, organ weight data and macroscopic examinations. Except that body weights of both sexes of the 2500 mg/kg cyadox group were significantly lower than controls beginning after the second week of treatment. Body weights of females of 150 mg/kg olaquindox group were significantly lower than those of the control group at weeks 3 and 4. Other groups were unaffected by treatments. Histopathological observations revealed that 2500 mg/kg cyadox or 150 mg/kg olaquindox induced swelling and fatty degeneration of the hepatocytes and proximal renal tubular epithelial cells. It was for the first time that changes were found in the liver and kidneys of rats fed 2500 mg/kg cyadox. The no-observed-adverse-effect level (NOAEL) of cyadox for rats was estimated to be 150 mg/kg dietary dose level.

Administration, Oral↗

PubMed2005

Local solvent density augmentation around a solute in supercritical solvent bath: 1. A mechanism explanation and a new phenomenon.

A recently proposed partitioned density functional (DF) approximation (Phys. Rev. E 2003, 68, 061201) and an adjustable parameter-free version of a Lagrangian theorem-based DF approximation (LTDFA: Phys. Lett. A 2003, 319, 279) are combined to propose a DF approximation for nonuniform Lennard-Jones (LJ) fluid. Predictions of the present DF approximation for local LJ solvent density inhomogeneity around a large LJ solute particle or hard core Yukawa particle are in good agreement with existing simulation data. An extensive investigation about the effect of solvent bath temperature, solvent-solute interaction range, solvent-solute interaction magnitude, and solute size on the local solvent density inhomogeneity is carried out with the present DF approximation. It is found that a plateau of solvent accumulation number as a function of solvent bath bulk density is due to a coupling between the solvent-solute interaction and solvent correlation whose mathematical expression is a convolution integral appearing in the density profile equation of the DF theory formalism. The coupling becomes stronger as the increasing of the whole solvent-solute interaction strength, solute size relative to solvent size, and the closeness to the critical density and temperature of the solvent bath. When the attractive solvent-solute interaction becomes large enough and the bulk state moves close enough to the critical temperature of the solvent bath, the maximum solvent accumulation number as a function of solvent bath bulk density appears near the solvent bath critical density; the appearance of this maximum is in contrast with a conclusion drawn by a previous investigation based on an inhomogeneous version of Ornstein-Zernike integral equation carried out only for a smaller parameter space than that in the present paper. Advantage of the DFT approach over the integral equation is discussed.

Algorithms↗

PubMed2005

Sedimentation equilibrium of colloidal suspensions in a planar pore based on density functional theory and the hard-core attractive Yukawa model.

The sedimentation equilibrium of colloidal suspensions modeled by hard-core attractive Yukawa (HCAY) fluids in a planar pore is studied. The density profile of the HCAY fluid in a gravitational field and its distribution between the pore and uniform phases are investigated by a density functional theory (DFT) approach, which results from employing a recently proposed parameter-free version of the Lagrangian theorem-based density functional approximation (Zhou, S. Phys. Lett. A 2003, 319, 279) for hard-sphere fluids to the hard-core part of the HCAY fluid, and the second-order functional perturbation expansion approximation to the tail part as was done in a recent partitioned density functional approximation (Zhou, S. Phys. Rev. E: Stat. Phys., Plasmas, Fluids, Relat. Interdiscip. Top. 2003, 68, 061201). The resultant DFT approach is, thus, the first adjustable parameter-free DFT for HCAY fluids. The validity of the present DFT for HCAY fluids of reduced range parameter z(red) = 1.8 under various external potentials is established in the first of the papers cited previously. The present DFT for HCAY fluids can predict the radial distribution function for the bulk HCAY fluid accurately in the colloidal limit (large value of z(red)), and in the hard-sphere limit, its prediction for the density profile of the hard-sphere fluid in a gravitational field is in very good agreement with the existing simulation data. The dependence of the density profile and distribution coefficient on the magnitude of the interparticle attraction, gravitational field, and degree of confinement is investigated in detail by the present DFT approach. Intuitive and qualitative analyses are also compared with the quantitative DFT calculational results.

Journal Article↗

PubMed2005

Analysis of the validity of perturbation density functional theory: based on extensive simulation for simple fluid at supercritical and subcritical temperature under various external potentials.

Because of the scarcity of available simulation data for confined hard-core attractive Yukawa model fluid, extensive Monte Carlo (MC) simulation research for this fluid under the influence of various external potentials were carried out. The present MC simulation results were employed to test a performance of the third-order perturbation density functional theory (DFT) based on a high order direct correlation function (DCF) [S. Zhou and E. Ruckenstein, Phys. Rev. E. 61, 2704 (2000)]. It was found that the present perturbation DFT formalism is soundly structured only if the imported second-order DCF is reliable. In this case, the accuracy of the results can be satisfactory or even very high for various types of external potentials. Further, the associated adjustable parameter can be universal, i.e., independent of the particular external field responsible for the generation of a nonuniform density profile. Dependence of both the maintenance of the reliability of the formalism and holding of the universality of the adjustable parameter on the accuracy of the imported bulk second-order DCF can be strengthened by the large difference between the external field investigated and that caused by a single hard wall used for specification of the adjustable parameter. In case the gaseous density in the subcritical region is below the coexistence density, an excellent performance of the present formalism is observed even for the mean spherical approximation's second-order DCF as an input. This advantageous property, combined with the fact that the present formalism needs only the second-order DCF of fluid at the coexistence state as an input, enables the present formalism to be a very good theoretical tool for the investigations of wetting and prewetting transitions.

Journal Article↗

PubMed2004

Application of Lagrangian theorem-based density-functional approximation free of adjustable parameters to nonhard-sphere fluid.

A recently proposed parameter free version of a Lagrangian theorem-based density functional approximation (LTDFA) [S. Zhou, Phys. Lett. A 319, 279 (2003)] for hard-sphere fluid is applied to hard-core attractive Yukawa model fluid by dividing bulk second-order direct correlation function (DCF) of fluid under consideration into hard-core part and tail part. The former is treated by the parameter free version of the LTDFA, while the tail part is treated by second-order functional perturbation expansion approximation as done in a recent partitioned DFA [S. Zhou, Phys. Rev. E 68, 061201 (2003)]. Two versions of mean spherical approximation (MSA) for the bulk second-order DCF are employed as input, one is the less accurate plain MSA whose tail part of the second-order DCF is strictly independent of a density argument, the other is the more accurate inverse temperature expansion version of the MSA whose tail part is not strictly independent of the density argument. Calculational results indicate that prediction based on the plain MSA is far more accurate than that based on the inverse temperature expansion version of the MSA. The reason is considered to be that the partitioned DFA requires that the tail part is highly or completely independent of the density argument, the plain MSA, by assuming that the tail part is exactly the potential itself, embodies all of the nonlinearities into the hard-core part which can be treated satisfactorily by the parameter free version of the LTDFA. The present investigation results in a universal method for constructing DFA for nonuniform any nonhard-sphere interaction potential fluids.

Journal Article↗

PubMed2003

Partitioned density functional approach for a Lennard-Jones fluid.

The existing classical density functional approach for nonuniform Lennard-Jones fluid, which is based on dividing the Lennard-Jones interaction potential into a short-range, repulsive part, and a smoothly varying, long-range, attractive tail, was improved by dividing the bulk second-order direct correlation function into strongly density-depending short-range part and weakly density-depending long-range part. The latter is treated by functional perturbation expansion truncated at the lowest order whose accuracy depends on how weakly the long-range part depends on the bulk density. The former is treated by the truncated functional perturbation expansion which is rewritten in the form of the simple weighted density approximation and incorporates the omitted higher-order terms by applying Lagrangian theorem of differential calculus to the reformulated form. The two approximations are put into the density profile equation of the density functional theory formalism to predict the density distribution for Lennard-Jones fluid in contact with a hard wall or between two hard walls within the whole density range for reduced temperature T(*)=1.35 and a density point for reduced temperature T(*)=1. The present partitioned density functional theory performs much better than several previous density functional perturbation theory approaches and a recently proposed bridge density functional approximation.

Journal Article↗