Search PubMed⌕ Search

Biomedical subjects

Shinobu Itoh

Publications and source records attributed to Shinobu Itoh.

32 records · Page 2Linked to original sources
PubMed2004

Quantitative evaluation of d-pi interaction in copper(I) complexes and control of copper(I)-dioxygen reactivity.

Crystal structures of the copper(I) complexes 1(X), 2, and 3 of a series of tridentate ligands L1(X), L2, and L3, respectively (L1(X): p-substituted derivatives of N,N-bis[2-(2-pyridyl)ethyl]-2-phenylethylamine; X=H, Me, OMe, Cl, NO(2); L2: N,N-bis[2-(2-pyridyl)ethyl]-2-methyl-2-phenylethylamine; L3: N,N-bis[2-(2-pyridyl)ethyl]-2,2-diphenylethylamine) were solved to demonstrate that all the copper(I) complexes involve an eta(2) copper-arene interaction with the phenyl ring of the ligand sidearm. The Cu(I) ion in each complex has a distorted tetrahedral geometry consisting of the three nitrogen atoms (one tertiary amine nitrogen atom and two pyridine nitrogen atoms) and C(1)-C(2) of the phenyl ring of ligand sidearm, whereby the Cu-C distances of the copper-arene interaction significantly depend on the para substituents. The existence of the copper-arene interaction in a nonpolar organic solvent (CH(2)Cl(2)) was demonstrated by the observation of an intense MLCT band around 290 nm, and the magnitude of the interaction was evaluated by detailed analysis of the (1)H and (13)C NMR spectra and the redox potentials E(1/2) of the copper ion, as well as by means of the ligand-exchange reaction between the phenyl ring and CH(3)CN as an external ligand. The thermodynamic parameters DeltaH(o) and DeltaS(o) for the ligand-exchange reaction with CH(3)CN afforded a quantitative measure for the energy difference of the copper-arene interaction in the series of copper(I) complexes. Density functional studies indicated that the copper(I)-arene interaction mainly consists of the interaction between the d(z(2) ) orbital of Cu(I) and a pi orbital of the phenyl ring. The copper(I) complexes 1(X) reacted with O(2) at -80 degrees C in CH(2)Cl(2) to give the corresponding (micro-eta(2):eta(2)-peroxo)dicopper(II) complexes 4, the formation rates k(obs) of which were significantly retarded by stronger d-pi interaction, while complexes 2 and 3, which exhibit the strongest d-pi interaction showed significantly lower reactivity toward O(2) under the same experimental conditions. Thus, the d-pi interaction has been demonstrated for the first time to affect the copper(I)-dioxygen reactivity, and represents a new aspect of ligand effects in copper(I)-dioxygen chemistry.

Journal Article↗
PubMed2004

Dinuclear copper-dioxygen intermediates supported by polyamine ligands.

Reactivity of the dicopper(I) and dicopper(II) complexes supported by novel polyamine ligands L1 (1,11-bis(6-methylpyridin-2-yl)-2,6,10-triaza-2,6,10-tribenzylundecane) and L2 (5-benzyl-1,9-bis(6-methylpyridin-2-yl)-2,8-bis(6-methylpyridin-2-ylmethyl)-2,5,8-triazanonane) towards O(2) and H(2)O(2), respectively, has been investigated in order to shed light on the ligand effects on Cu(2)/O(2) chemistry. The dicopper(I) complex of L1 (1a) readily reacted with O(2) in a 2:1 ratio at a low temperature (-94 degrees C) in acetone to afford a mixture of (mu-eta2.eta2-peroxo)dicopper(II) and bis(mu-oxo)dicopper(III) complexes. The formation of these species has been confirmed by the electron spin resonance (ESR) silence of the solution as well as their characteristic absorption bands in the UV-visible region (gammamax= 350 and 510 nm due to the peroxo complex and approximately 400 nm due to the bis(mu-oxo) complex] and the resonance Raman bands at 729 cm(-1) [Deltanu (16(O2)-18(O2)) = 38 cm(-1)] due to the peroxo complex and at 611 and 571 cm(-1) [Deltanu(16(O2)-18(O2)) = 22 and 7 cm(-1), respectively] due to the bis(mu-oxo) complex. The peroxo and bis(mu-oxo) complexes were unstable even at the low temperature, leading to oxidative N-dealkylation at the ligand framework. The dicopper(I) complex of L2 (2a) also reacted with O(2) to give (mu-hydroxo)dicopper(II) complex (2b(OH)) as the product. In this case, however, no active oxygen intermediate was detected even at the low temperature (-94 degrees C). With respect to the copper(II) complexes, treatment of the (mu-hydroxo)dicopper(II) complex of L1 (1b(OH)) with an equimolar amount of H(2)O(2) in acetone at -80 degrees C efficiently gave a (mu-1,1-hydroperoxo)dicopper(II) complex, the formation of which has been supported by its ESR-silence as well as UV-vis (370 and 650 nm) and resonance Raman spectra [881 cm(-1); [Deltanu (16(O2)-18(O2)) = 49 cm(-1)]. The (mu-1,1-hydroperoxo)dicopper(II) intermediate of L1 also decomposed slowly at the low temperature to give similar oxidative N-dealkylation products. Kinetic studies on the oxidative N-dealkylation reactions have been performed to provide insight into the reactivity of the active oxygen intermediates.

Journal Article↗
PubMed2003

Substituent effects of beta-diketiminate ligands on the structure and physicochemical properties of copper(II) complexes.

Substituent effects of beta-diketiminate ligands on the structure and physicochemical properties of the copper(II) complexes have been systematically investigated by using 3-iminopropenylamine derivatives R1LR3H, R3-N=CH-C(R1)=CH-NH-R3, where R1 is Me, H, CN, or NO2, and R3 is Ph, Mes (mesityl), Dep (2,6-diethylphenyl), Dipp (2,6-diisopropylphenyl), or Dtbp (3,5-di-tert-butylphenyl). When the ligands with R3=Ph or Dtbp were treated with CuII(OAc)2, bis(beta-diketiminate) copper(II) complexes exhibiting distorted tetrahedral geometries were obtained, the crystal structures of which were nearly the same as each other regardless of the alpha-substituent (R1); dihedral angles between the two beta-diketiminate coordination planes are 62.5 +/- 1.2 degrees, and the Cu-N bond lengths are 1.959 +/- 0.008 A. The distorted tetrahedral structures are maintained in solution, but the spectroscopic features, especially gII values of the ESR spectra and the d-d bands of the absorption spectra, as well as the electrochemical behaviors of the complexes, are significantly affected by the electronic nature of R1. The ligands with R3=Mes and Dep, on the other hand, gave di(mu-hydroxo)dicopper(II) complexes, and their crystal structures as well as spectroscopic and electrochemical features have also been explored. Furthermore, the ligand with the more sterically encumbered aromatic substituent (Dipp) provided a mononuclear four-coordinate square planar copper(II) complex supported by one beta-diketiminate ligand and one didentate acetate ion. Thus, the beta-diketiminate ligands with a variety of substituents (R1 and R3) have been explored to provide coordinatively unsaturated (four-coordinate) mononuclear and dinuclear copper(II) complexes with significantly different coordination geometry and properties.

Journal Article↗
PubMed2003

Structures and redox reactivities of copper complexes of (2-pyridyl)alkylamine ligands. Effects of the alkyl linker chain length.

Ligand effects on the structures and redox reactivities of copper complexes have been examined using (2-pyridyl)alkylamine derivatives as the supporting ligands, where particular attention has been focused on the effects of the alkyl linker chain length connecting the tertiary amine nitrogen atom and the pyridine nucleus: N[bond]CH(2)[bond]Py (Pym) vs N[bond]CH(2)CH(2)[bond]Py (Pye). X-ray crystallographic analysis of the copper(I) complex of tridentate ligand (Phe)L(Pym2) [N,N-di(2-pyridylmethyl)-2-phenylethylamine] (complex 1) has demonstrated that it possesses a trigonal pyramidal geometry in which a d[bond]pi interaction with an eta(1)-binding mode exists between the metal ion and one of the ortho carbons of the phenyl ring of the ligand side arm (phenethyl). The result shows sharp contrast to the d[bond]pi interaction with an eta(2)-binding mode existing in the copper(I) complex of (Phe)L(Pye2) [N,N-di[2-(2-pyridyl)ethyl]-2-phenethylamine] (complex 2). Such a d-pi interaction has been shown to affect the stability of the copper(I) complex in CH(2)Cl(2). Oxygenation of copper(I) complex 1 supported by (Phe)L(Pym2) produces a bis(mu-oxo)dicopper(III) complex, also being in sharp contrast to the case of the copper(I) complex 2 with ligand (Phe)L(Pye2), which preferentially affords a (micro-eta(2):eta(2)-peroxo)dicopper(II) complex in the reaction with O(2). Such an effect of the alkyl linker chain length of the metal binding site has also been found to operate in the RSSR (disulfide)/2RS(-) (thiolate) redox system. Namely, ligand (S2,R)L(Pym1) (di[2-[(alkyl)(2-pyridinylmethyl)amino]ethyl] disulfide) with the methylene linker group (Pym) induced the reductive disulfide bond cleavage in the reaction with copper(I) ion to give a bis(micro-thiolato)dicopper(II) complex, while the ligand with the ethylene linker group (Pye), (S2,Bn)L(Pye1) (di[2-[(benzyl)(2-(2-pyridinyl)ethyl)amino]ethyl] disulfide), gave a disulfide-dicopper(I) complex. These ligand effects in the Cu(2)[bond]O(2) and Cu(2)[bond]S(2) systems have been discussed by taking into account the difference in electron-donor ability of the pyridine nucleus between the Pym and Pye ligand systems.

Journal Article↗
PubMed2003

Kinetic evaluation of phenolase activity of tyrosinase using simplified catalytic reaction system.

A very simple tyrosinase reaction system has been developed using borate anion as a trapping agent of catechols and hydroxylamine as an external reductant to evaluate the phenolase activity without the interference of catecholase activity. Reactivities of variously para-substituted phenols in this system were compared directly to those of the phenols in the model reactions, demonstrating that the enzymatic oxygenation reaction of phenols proceeds via the same mechanism as the model reaction, that is, electrophilic aromatic substitution mechanism.

Borates↗
PubMed2003

Oxidation mechanism of phenols by dicopper-dioxygen (Cu(2)/O(2)) complexes.

The first systematic studies on the oxidation of neutral phenols (ArOH) by the mu-eta(2):eta(2)-peroxo)dicopper(II) complex (A) and the bis(mu-oxo)dicopper(III) complex (B) supported by the 2-(2-pyridyl)ethylamine tridentate and didentate ligands L(Py2) and L(Py1), respectively, have been carried out in order to get insight into the phenolic O-H bond activation mechanism by metal-oxo species. In both cases (A and B), the C-C coupling dimer was obtained as a solely isolable product in approximately 50% yield base on the dicopper-dioxygen (Cu(2)/O(2)) complexes, suggesting that both A and B act as electron-transfer oxidants for the phenol oxidation. The rate-dependence in the oxidation of phenols by the Cu(2)/O(2) complexes on the one-electron oxidation potentials of the phenol substrates as well as the kinetic deuterium isotope effects obtained using ArOD have indicated that the reaction involves a proton-coupled electron transfer (PCET) mechanism. The reactivity of phenols for net hydrogen atom transfer reactions to cumylperoxyl radical (C) has also been investigated to demonstrate that the rate-dependence of the reaction on the one-electron oxidation potentials of the phenols is significantly smaller than that of the reaction with the Cu(2)O(2) complexes, indicative of the direct hydrogen atom transfer mechanism (HAT). Thus, the results unambiguously confirmed that the oxidation of phenols by the Cu(2)O(2) complex proceeds via the PCET mechanism rather than the HAT mechanism involved in the cumylperoxyl radical system. The reactivity difference between A and B has also been discussed by taking account of the existed fast equilibrium between A and B.

Biomimetic Materials↗
PubMed2002

Copper chemistry of beta-diketiminate ligands: monomer/dimer equilibria and a new class of bis(mu-oxo)dicopper compounds.

A series of Cu(I) and Cu(II) complexes of a variety of beta-diketiminate ligands (L(-)) with a range of substitution patterns were prepared and characterized by spectroscopic, electrochemical, and, in several cases, X-ray crystallographic methods. Specifically, complexes of the general formula [LCuCl](2) were structurally characterized and their magnetic properties assessed through EPR spectroscopy of solutions and, in one instance, by variable-temperature SQUID magnetization measurements on a powder sample. UV-vis spectra indicated reversible dissociation to 3-coordinate monomers LCuCl in solution at temperatures above -55 degrees C. The Cu(I) complexes LCu(MeCN) exhibited reversible Cu(I)/Cu(II) redox couples with E(1/2) values between +300 and +520 mV versus NHE (cyclic voltammetry, MeCN solutions). These complexes were highly reactive with O(2), yielding intermediates that were identified as rare examples of neutral bis(mu-oxo)dicopper complexes on the basis of their EPR silence, diagnostic UV-vis absorption data, and O-isotope-sensitive resonance Raman spectroscopic features. The structural features of the compounds [LCuCl](2) and LCu(MeCN) as well as the proclivity to form bis(mu-oxo)dicopper products upon oxygenation of the Cu(I) complexes are compared to data previously reported for complexes of more sterically hindered beta-diketiminate ligands (Aboelella, N. W.; Lewis, E. A.; Reynolds, A. M.; Brennessel, W. W.; Cramer, C. J.; Tolman, W. B. J. Am. Chem. Soc. 2002, 124, 10600. Spencer, D. J. E.; Aboelella, N. W.; Reynolds, A. M.; Holland, P. L.; Tolman, W. B. J. Am. Chem. Soc. 2002, 124, 2108. Holland, P. L.; Tolman, W. B. J. Am. Chem. Soc. 1999, 121, 7270). The observed structural and reactivity differences are rationalized by considering the steric influences of both the substituents on the flanking aromatic rings and those present on the beta-diketiminate backbone.

Chemical Phenomena↗
PubMed2002

Interconversion between bis(mu-thiolato)dicopper(II) and disulfide-bridged dicopper(I) complexes mediated by chloride ion.

An unprecedented clean interconversion between a novel bis(mu-thiolato)dicopper(II) complex (1) and a disulfide-bridged dicopper(I) complex (3) through a disulfide-bridged (mu-chloro)dicopper(I) complex (2) mediated by chloride ion has been established for the first time, providing a new redox chemistry of the transition metal-sulfur complexes. Crystal structures of 1 and 3 as well as spectroscopic features of the compounds are reported.

Journal Article↗
PubMed2002

Fine-tuning of copper(I)-dioxygen reactivity by 2-(2-pyridyl)ethylamine bidentate ligands.

Copper(I)-dioxygen reactivity has been examined using a series of 2-(2-pyridyl)ethylamine bidentate ligands (R1)Py1(R2,R3). The bidentate ligand with the methyl substituent on the pyridine nucleus (Me)Py1(Et,Bz) (N-benzyl-N-ethyl-2-(6-methylpyridin-2-yl)ethylamine) predominantly provided a (mu-eta(2):eta(2)-peroxo)dicopper(II) complex, while the bidentate ligand without the 6-methyl group (H)Py1(Et,Bz) (N-benzyl-N-ethyl-2-(2-pyridyl)ethylamine) afforded a bis(mu-oxo)dicopper(III) complex under the same experimental conditions. Both Cu(2)O(2) complexes gradually decompose, leading to oxidative N-dealkylation reaction of the benzyl group. Detailed kinetic analysis has revealed that the bis(mu-oxo)dicopper(III) complex is the common reactive intermediate in both cases and that O[bond]O bond homolysis of the peroxo complex is the rate-determining step in the former case with (Me)Py1(Et,Bz). On the other hand, the copper(I) complex supported by the bidentate ligand with the smallest N-alkyl group ((H)Py1(Me,Me), N,N-dimethyl-2-(2-pyridyl)ethylamine) reacts with molecular oxygen in a 3:1 ratio in acetone at a low temperature to give a mixed-valence trinuclear copper(II, II, III) complex with two mu(3)-oxo bridges, the UV-vis spectrum of which is very close to that of an active oxygen intermediate of lacase. Detailed spectroscopic analysis on the oxygenation reaction at different concentrations has indicated that a bis(mu-oxo)dicopper(III) complex is the precursor for the formation of trinuclear copper complex. In the reaction with 2,4-di-tert-butylphenol (DBP), the trinuclear copper(II, II, III) complex acts as a two-electron oxidant to produce an equimolar amount of the C[bond]C coupling dimer of DBP (3,5,3',5'-tetra-tert-butyl-biphenyl-2,2'-diol) and a bis(mu-hydroxo)dicopper(II) complex. Kinetic analysis has shown that the reaction consists of two distinct steps, where the first step involves a binding of DBP to the trinuclear complex to give a certain intermediate that further reacts with the second molecule of DBP to give another intermediate, from which the final products are released. Steric and/or electronic effects of the 6-methyl group and the N-alkyl substituents of the bidentate ligands on the copper(I)-dioxygen reactivity have been discussed.

Journal Article↗
PubMed2002

Oxidative degradation of beta-diketiminate ligand in copper(II) and zinc(II) complexes.

Copper(II) and zinc(II) complexes supported by a popular beta-diketiminate ligand (1(-), 2-mesitylamino-4-mesitylimino-2-pentene), [CuII(1)(AcO)] and [[ZnII(1)]2(mu-MeO)(mu-AcO)], have been demonstrated to undergo an oxidative degradation to give a ketone diimine derivative (2) under aerobic conditions. The crystal structures of the mononuclear copper(II) and dinuclear zinc(II) complexes of the beta-diketiminate ligand as well as the copper(II) complex of the modified ligand have been determined by X-ray crystallographic analysis. Mechanism for the oxidative degradation reaction of the beta-diketiminate ligand is also discussed.

Journal Article↗
PubMed2002

Oxo-transfer reaction from a bis(mu-oxo)dicopper(III) complex to sulfides.

Oxygenation of sulfides to the corresponding sulfoxides by a distinct bis(mu-oxo)dicopper(III) complex has been accomplished for the first time using 2-(2-pyridyl)ethylamine derivative L(Py1Bz) (N-ethyl-N-[2-(2-pyridyl)ethyl]-alpha,alpha-dideuteriobenzylamine) as the supporting ligand. Detailed kinetic analysis has indicated that the reaction consists of two distinct steps, where the first quick process is association of the substrate to the bis(mu-oxo)dicopper(III) complex (k(1)) and the second slow process is intramolecular oxygen atom transfer from the copper-oxo species to the substrate in the associated complex (k(2)). The rate constant k(2) of the second process is rather insensitive to the oxidation potential of the substrates, suggesting that the oxo-transfer reaction proceeds via a mechanism involving direct oxygen atom transfer rather than a mechanism involving electron transfer.

Journal Article↗
PubMed1997

Active Site Models for Galactose Oxidase. Electronic Effect of the Thioether Group in the Novel Organic Cofactor.

The electronic effect of the thioether linkage between Tyr 272 and Cys 228 (the novel organic cofactor) of galactose oxidase has been examined by using model compounds, 2-(methylthio)-p-cresol (1H), 2-(methylthio)-4,6-dimethylphenol (2H), and 2-(methylthio)-4-methyl-6-[[bis[2-(2-pyridyl)ethyl]amino]methyl]phenol (3H), the physicochemical properties of which are compared to those of 2-[[bis[2-(2-pyridyl)ethyl]amino]methyl]-4-methylphenol (4H) and p-cresol (5H). (1)H NMR and electrochemical studies indicate that the methylthio group has essentially an electron-donating nature. On the other hand, the lower pK(a) values of 1H and 2H as compared to that of 5H suggest that the methylthio group also has a 2ppi-3dpi electron conjugative effect, stabilizing the negative charge on the phenolate oxygen. Furthermore, the electron-sharing conjugative effect of the substituent in the radical state has been clearly demonstrated by ESR studies and semiempirical molecular orbital calculations. Dimer copper(II) complexes [Cu(II)(2)(3(-)())(2)](PF(6))(2) (7) and [Cu(II)(2)(4(-)())(2)](PF(6))(2) (8) were prepared, and the crystal structures were determined by the X-ray diffraction method. Electrochemical analyses of the monomeric species [Cu(II)(3(-)())(py)](PF(6)) (9) and [Cu(II)(4(-)())(py)](PF(6)) (10) generated in situ by adding an external ligand such as pyridine (py) reveal that the methylthio substituent in the copper complex shows electronic effects similar to those of the free ligand stabilizing the phenoxyl radical state of the cofactor moiety in the Cu(II) complex.

Journal Article↗
PubMed1996

Model Studies of TTQ-Containing Amine Dehydrogenases.

The reactions of a TTQ model compound [1, 3-methyl-4-(3'-methylindol-2'-yl)indole-6,7-dione] with several amines have been investigated in organic media to obtain mechanistic information on the action of quinoprotein methylamine and aromatic amine dehydrogenases. It has been found that compound 1 acts as an efficient catalyst for the autorecycling oxidation of benzylamine by molecular oxygen in CH(3)OH. In order to evaluate the oxidation mechanism of amines by 1, the product analyses and kinetic studies have been carried out under anaerobic conditions. In the first stage of the reaction of 1 with amines, 1 is converted into an iminoquinone-type adduct (so-called substrateimine), which was isolated and characterized by using cyclopropylamine as a substrate. The observed NOE of the isolated product indicates clearly that the addition position of the amine is C-6 of the quinone. The molecular orbital calculations suggest that the thermodynamic stability of the carbinolamine intermediate is a major factor to determine such regioselectivity; the C-6 carbinolamine is more stable than the C-7 counterpart by 2.9 kcal/mol. The reactivity of several primary amines and the electronic effect of the p-substituents of benzylamine derivatives in the iminoquinone formation suggest that the addition step of the amine to the quinone is rate-determining. When amines having an acidic alpha-proton such as benzylamine derivatives are employed as substrates, formation of the iminoquinone adduct was followed by rearrangement to the productimine. The kinetic analysis has revealed that this rearrangement consists of noncatalyzed and general base-catalyzed processes. Large kinetic isotope effects of 7.8 and 9.2 were observed for both the noncatalyzed and general base-catalyzed processes, respectively, since these steps involve a proton abstraction from the alpha-position of the substrate. In the reaction with benzhydrylamine, the product imine was isolated quantitatively and well characterized by several spectroscopic data. In the case of benzylamine, the product imine is further converted into the aminophenol derivative by the imine exchange reaction with excess benzylamine. These results indicate clearly that the amine oxidation by compound 1 proceeds via a transamination mechanism as suggested for the enzymatic oxidation of amines by TTQ cofactor.

Journal Article↗