Search PubMed⌕ Search

Biomedical subjects

Sheng Dai

Publications and source records attributed to Sheng Dai.

53 records · Page 3Linked to original sources
PubMed2004

Extraction of cesium ions from aqueous solutions using calix[4]arene-bis(tert-octylbenzo-crown-6) in ionic liquids.

Solvent extraction of cesium ions from aqueous solution to hydrophobic ionic liquids without the introduction of an organophilic anion in the aqueous phase was demonstrated using calix[4]arene-bis(tert-octylbenzo-crown-6) (BOBCalixC6) as an extractant. The selectivity of this extraction process toward cesium ions and the use of a sacrificial cation exchanger (NaBPh(4)) to control loss of imidazolium cation to the aqueous solutions by ion exchange have been investigated.

Journal Article↗
PubMed2004

Solvent extraction of sr2+ and cs+ based on room-temperature ionic liquids containing monoaza-substituted crown ethers.

A series of N-alkyl aza-18-crown-6 ethers were synthesized and characterized by NMR spectroscopy and mass spectrometry. These monoaza-substituted crown ethers in ionic liquids were investigated as recyclable extractants for separation of Sr(2+) and Cs(+) from aqueous solutions. The pH-sensitive complexation capability of these ligands allows for a facile stripping process to be developed so that both macrocyclic ligands and ionic liquids can be reused. The extraction efficiencies and selectivities of these monoaza-substituted crown ethers for Na(+), K(+), Cs(+), and Sr(2+) were studied in comparison to those of dicyclohexano-18-crown-6 under the same conditions. The extraction selectivity order for dicyclohexano-18-crown-6 in the ionic liquids investigated here was K(+) >> Sr(2+) > Cs(+) > Na(+). The extraction selectivity order for N-alkyl aza-18-crown-6, in which the alkyl group is varied systematically from ethyl to n-dodecyl, was Sr(2+) >> K(+) > Cs(+) > Na(+) in 1-ethyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide and K(+) > Sr(2+) > Cs(+) > Na(+) in 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl] amide and 1-octyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide. The strong dependence of selectivity on the type of ionic liquid indicates an important role played by solvation in solvent extraction processes based on ionic liquids. The optimization of macrocyclic ligands and ionic liquids led to an extraction system that is highly selective toward Sr(2+).

Journal Article↗
PubMed2004

Silver-coated zeolite crystal films as surface-enhanced Raman scattering substrates.

Silver-coated zeolite A and zeolite NaX crystal films prepared by vacuum deposition were investigated as surface-enhanced Raman scattering (SERS) substrates. The substrates were active for the enhancement of Raman scattering from uranyl ions. A detection limit of 10(-5) M for uranyl was obtained using silver-coated zeolite A films. One advantage of these zeolite-based substrates is that the negatively charged microporous framework provides the selectivity for adsorption based on static electric charges. The SERS effects of positively charged uranyl ions and neutrally charged benzoic acid were compared. For the zeolite A substrate, there was a 100-times-greater sensitivity.

Coated Materials, Biocompatible↗
PubMed2004

Raman spectroscopic detection for perchlorate at low concentrations.

Perchlorate (ClO4-) has recently emerged as a widespread environmental contaminant found in groundwater and surface water, and there is a great need for rapid detection and monitoring of this contaminant. In this study, we explore the use of surface-enhanced (SERS) and normal Raman spectroscopy for detecting ClO4- at low concentrations. We found that ClO4- is SERS active and, for the first time, were able to detect ClO4- at concentrations as low as 10(-6)-10(-7) M (or 10-100 microg/L) through the application of silver SERS substrates or selective sorbents such as bifunctional anion-exchange resins. The use of selective sorbents greatly enhanced the reproducibility and sensitivity of ClO4- detection by normal Raman spectroscopy. Further exploration and research may allow application of these techniques for in situ, real-time detection and monitoring of ClO4- in environmental samples at even lower concentrations.

Perchlorates↗
PubMed2004

Performance of chloroperoxidase stabilization in mesoporous sol-gel glass using in situ glucose oxidase peroxide generation.

A unique mesoporous sol-gel glass possessing a highly ordered porous structure (with three pore sizes of about 50, 150, and 200 A diameter) was used as a support material for immobilization of the enzyme chloroperoxidase (CPO). CPO was bound onto the glass via a bifunctional ligand, trimethoxysilylpropanal. In situ production of the cosubstrate, H2O2, was achieved using glucose oxidase. Solvent stability in acetonitrile mixtures was enhanced when a pore size larger than the size of CPO was used (i.e., 200 A). From these results, it appears that the glass-enzyme complex developed through the present work can be used as high-performance biocatalysts for various chemical-processing applications, particularly in harsh conditions.

Aldehydes↗
PubMed2003

A graphitized-carbon monolithic column.

The preparation of a novel carbon monolithic column for high performance liquid chromatography is described. A phenolic resin rod with embedded 10-microm silica beads was prepared by acid-catalyzed polymerization of a resorcinol/iron(III) complex and formaldehyde. This rod was carbonized and graphitized under inert atmosphere with a programmed temperature cycle from room temperature to 1250 degrees C. Subsequently, the silica beads along with iron catalysts were removed, leaving a porous carbon rod. Imaging of this monolithic rod by scanning and transmission electron microscopies revealed a highly interconnected bimodal porous structure. The porosity and pore size distribution of the mesopores were characterized by N2 absorption/desorption. Graphene sheets were found in the TEM images of the carbon rod, and the graphite index was characterized by Raman spectrum and X-ray diffraction. A monolithic column prepared with the aforementioned carbon rod was evaluated using a mixture of alkylbenzenes. It exhibited an excellent separation power and a low hydraulic resistance. The bundle-of-capillaries model was used to characterize the hydrodynamics of this monolith. Its permeability was found to agree well with the theoretical one.

Journal Article↗
PubMed2003

High-yield solvothermal formation of magnetic CoPt alloy nanowires.

One-dimensional (1D) magnetic nanomaterials have attracted much attention recently because of their applications in magnetic recording and spintronics. Nevertheless, it remains a challenge to prepare free-standing magnetic nanowires in high yield. This Communication reports the successful high-yield synthesis of an interesting 1D ferromagnetic CoPt alloy by direct decomposition of platinum acetylacetonate and cobalt carbonyl compound in ethylenediamine solvent through a solvothermal reaction. The CoPt alloy nanowires obtained have a tunable diameter of 10-50 nm and a length along the longitudinal axis of up to several microns, depending on crystallization temperature and reaction time. A unique formation mechanism involving coarsening and ripening under solvothermal conditions was discovered. This research opens new opportunities in synthesizing nanomaterials through low-temperature solvothermal processes.

Journal Article↗
PubMed2003

Fluorescence spectroscopic studies of natural organic matter fractions.

Because of the well-known molecular complexity and heterogeneity of natural organic matter (NOM), an aquatic bulk NOM was fractionated into well-defined polyphenolic-rich and carbohydrate-rich subfractions. These fractions were systematically characterized by fluorescence emission, three dimensional excitation-emission matrices, and synchronous-scan excitation spectroscopy in comparison with those of the reference International Humic Substances Society soil humic acid and Suwannee River fulvic acid. Results indicate that fluorescence spectroscopy can be useful to qualitatively differentiate not only NOM compounds from varying origins but also NOM subcomponents with varying compositions and functional properties. The polyphenolic-rich NOM-PP fraction exhibited a much more intense fluorescence and a red shift of peak position in comparison with the carbohydrate-rich NOM-CH fraction. Results also indicate that synchronous excitation spectra were able to provide improved peak resolution and structural signatures such as peak positioning, shift, and intensity among various NOM components as compared with those of the emission and excitation spectra. In particular, the synchronous spectral peak intensity and its red shift in the region of about 450-480 nm may be used to indicate the presence or absence of high molecular weight and polycondensed humic organic components, or the multicomponent nature of NOM or NOM subcomponents.

Chemical Fractionation↗
PubMed2002

Change of pH indicator's pKa value via molecular imprinting.

The pKa value of the indicator is significantly changed up to several orders of magnitude by the imprinting synthesis; this fine-tuning of the reactivity for pH indicators via the imprinting synthesis may find novel applications in fabricating pH sensors with tailored pKa values.

Journal Article↗
PubMed2002

Ionic liquids: a new class of sensing materials for detection of organic vapors based on the use of a quartz crystal microbalance.

A QCM device employing ionic liquids as the sensing materials for organic vapors has been developed and evaluated. The sensing mechanism is based on the fact that the viscosity of the ionic liquid membrane decreases rapidly due to solubilization of analytes in the ionic liquids. This change in viscosity, which varies with the chemical species of the vapors and the types of ionic liquids, results in a frequency shift of the corresponding quartz crystal. The QCM sensor demonstrated a rapid response (average response time of less than 2 s) to organic vapors with an excellent reversibility because of the fast diffusion of analytes in ionic liquids. Furthermore, the ionic liquids, with zero vapor pressure and stable chemical properties, ensure a long-term shelf life for the sensor.

Journal Article↗
PubMed2002

Spectroscopic characterization of the structural and functional properties of natural organic matter fractions.

Natural organic matter (NOM) is known to be complex in nature with varying structural and functional characteristics. In this study, an aquatic NOM was fractionated into the polyphenolic-rich (NOM-PP) and the carbohydrate-rich (NOM-CH) fractions in an attempt to better characterize their chemical and structural properties along with a reference soil humic acid (SHA). Various spectroscopic techniques were employed for the study, including ultraviolet-visible (UV/Vis). 13C-nuclear magnetic resonance, Fourier-transform infrared, fluorescence, and electron paramagnetic resonance spectroscopies. Results indicate that the relative abundance of aromatic C=C and methoxyl (-OCH3) functional groups are in the order of SHA > NOM-PP > NOM-CH. However, the aquatic NOM-PP and NOM-CH fractions are characterized by high contents of carboxylic and alcoholic functional groups relative to the SHA. In particular, the NOM-PP fraction appears to contain more phenolic and ketonic functional groups than the NOM-CH and SHA fractions, and it gives a strong fluorescence and high paramagnetic spin count. On the other hand, the NOM-CH fraction possesses a relatively low amount of carbon but a high amount of oxygen or oxygen-containing structural features, such as carbohydrate-OH and carboxylic groups, and shows the least fluorescence intensity and paramagnetic spin counts. Results of these spectroscopic studies confirm the heterogeneous nature of NOM, and point out the importance of isolation and improved characterization of various NOM subcomponents in order to better understand the behavior and roles of NOM in the natural environment.

Humic Substances↗