Biomedical subjects

Sergey N Krylov

Publications and source records attributed to Sergey N Krylov.

30 records · Page 2Linked to original sources

PubMed2004

Monitoring viral DNA release with capillary electrophoresis.

Viral DNA injection into host cells is one of the primary mechanisms of viral propagation. Drug development that targets viral propagation requires fast and sensitive methods for monitoring the release of viral DNA in vitro. Here we demonstrate the use of capillary electrophoresis (CE) for monitoring DNA release from virus particles. As a model for this study, we used T5 bacteriophages that infect the bacterium Escherichia coli K-12 by binding to the outer membrane FhuA receptor and then injecting DNA. DNA release from the T5 phages in vitro was induced by either elevated temperature or by interaction with the purified FhuA receptor. After DNA release, the viral samples were stained with the high affinity fluorescent dye YOYO-1, injected into the capillary and subjected to electrophoresis. YOYO-1-stained DNA generated a well-defined peak, allowing reliable detection of viral DNA from as few as 10(5) viral particles. The staining to track T5 phage DNA release exemplifies the great versatility that CE offers in studying viral systems. This CE-based method can be used to study molecular mechanisms of viral infections and to evaluate anti-viral drug candidates.

DNA, Viral↗

PubMed2004

Single-stranded DNA-binding protein facilitates gel-free analysis of polymerase chain reaction products in capillary electrophoresis.

It has been recently demonstrated that single-stranded DNA-binding protein (SSB) can facilitate quantitative analyses of DNA, RNA, and proteins in gel-free capillary electrophoresis (CE). Here, we report the application of SSB-mediated gel-free CE for analyses of polymerase chain reaction (PCR) products. The unique ability of SSB to bind ssDNA but not double-stranded DNA (dsDNA) allows efficient separation of three types of DNA molecules in the PCR reaction mixture: primers, products (amplified templates), and by-products, which originate from non-specific DNA hybridization. SSB-mediated gel-free CE analysis of PCR products combines simplicity, high sensitivity, and outstanding quantitative capabilities. The ability of the method to distinguish between products and by-products makes this method an indispensable tool in preparative PCR (e.g., in the development of nucleotide aptamers).

DNA Primers↗

PubMed2004

Asymmetry between sister cells in a cancer cell line revealed by chemical cytometry.

We introduce instrumentation and methodology for two-channel chemical cytometry of sister cells-two cells born from division of the same mother cell. The method is based on capillary electrophoresis with laser-induced fluorescence detection and allows simultaneously probing multiple intracellular components in sister cells. To test the new technology, we compared the expression patterns of green fluorescent protein (GFP) between the sisters in cultured cancer cells stably transfected with a GFP-expressing construct. We found that all sister cells had detectable asymmetry in the GFP expression patterns with a confidence level of higher than 95%. To our best knowledge, this is the first reported observation of asymmetric patterns of protein expression in sister cells in a cancer cell line. The proposed technology can reliably detect minor differences in chemical contents between sister cells, which makes it a potentially indispensable tool in studying the molecular mechanisms of developmental processes. It will be especially valuable in quantitative studies of cells with complex proliferation kinetics (e.g., stem cells).

Animals↗

PubMed2004

Sweeping capillary electrophoresis: a non-stopped-flow method for measuring bimolecular rate constant of complex formation between protein and DNA.

We introduce sweeping capillary electrophoresis (SweepCE), a non-stopped-flow method for directly measuring the bimolecular rate constant of complex formation, and demonstrate its use for studying protein-DNA interaction. The capillary is prefilled with a solution of DNA, and electrophoresis is then carried out from a solution of the protein in a continuous mode. Because the electrophoretic mobility of the protein is greater than that of DNA, the protein continuously mixes with DNA and forms the protein-DNA complex. The complex migrates with a velocity higher than that of DNA and causes sweeping of DNA, which gave the name to the method. The bimolecular rate constant, kon, of complex formation can be determined from the time profile of DNA concentration using a simple mathematical model of the sweeping process. In this proof-of-principle work, we used SweepCE to directly measure kon = (3.4 +/- 0.6) x 106 M-1 s-1 for the interaction between single-stranded DNA-binding protein and a 15-mer DNA oligonucleotide. Along with nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM), SweepCE establishes a universal and comprehensive platform for studying kinetic and equilibrium parameters of complex formation between biopolymers.

DNA↗

PubMed2004

Nonequilibrium capillary electrophoresis of equilibrium mixtures, mathematical model.

We recently introduced a new electrophoretic method, nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM). NECEEM provides a unique way of finding kinetic and equilibrium parameters of the formation of intermolecular complexes from a single electropherogram and allows for the use of weak affinity probes in protein quantitation. In this work, we study theoretical bases of NECEEM by developing a mathematical model for the new method. By solving a system of partial differential equations with diffusion in linear approximation, we found the analytical solution for concentrations of components involved in complex formation as functions of time from the beginning of separation and position in the capillary. The nonnumerical nature of the solution makes it a powerful tool in studying the theoretical foundations of the NECEEM method and modeling experimental results. We demonstrate the use of the model for finding binding parameters of complex formation by nonlinear regression of NECEEM electropherograms obtained experimentally.

DNA↗

PubMed2003

Using DNA-binding proteins as an analytical tool.

We propose that DNA-binding proteins can be used as highly efficient and versatile tools in analyses of DNA, RNA, and proteins. This work reports assays applying specific affinity probes: hybridization probes for analyses of DNA and RNA, and aptamer probes for analyses of proteins. Both types of probes are single-stranded DNA. In affinity analyses, in general, the probe (P) binds to a target molecule (T), and the amounts of the probe-target complex (P.T) and unbound P are determined. Distinguishing between P and P.T can be achieved by electrophoretic separation. If the electrophoretic mobilities of P and P.T are close in gel-free media, which is always the case for hybridization analyses, separation typically requires the use of a sieving matrix. Here we utilized a single-stranded DNA binding protein (SSB) to facilitate highly efficient gel-free separation of P and P.T in capillary electrophoresis (CE) for three types of targets: DNA, RNA, and proteins. When present in the CE run buffer, SSB binds differently to P and P.T. Due to this selective binding, SSB induces difference in electrophoretic mobilities of P and P.T in an SSB concentration-dependent fashion. The difference in the electrophoretic mobilities allows for affinity analyses of DNA, RNA, and proteins in gel-free CE. The large number of well-characterized DNA- and RNA-binding proteins and the diversity of their properties will allow researchers to design a comprehensive tool set for quantitative analyses of DNA, RNA, and proteins. Such analyses will facilitate identification of genomic DNA in ultra-small samples without error-prone and time-consuming PCR. They can also be used for monitoring gene expression at both mRNA and protein levels.

DNA Probes↗

PubMed2003

Use of capillary electrophoresis and endogenous fluorescent substrate to monitor intracellular activation of protein kinase A.

Here we demonstrate for the first time the use of an endogenous multiphosphorylatable substrate for monitoring the intracellular activation of kinase with capillary electrophoresis. First, we devised a novel PCR-based strategy for controlled generation of short multirepeat DNA sequences and applied this method to generate a green fluorescence protein (GFP)-tagged protein substrate containing eight phosphorylation sites for protein kinase A (PKA). The protein substrate was transiently expressed in C2C12 rat myoblast cells, and intracellular PKA was then activated by adding [8]-bromo-cyclic AMP to the cell culture medium. Phosphorylated product and nonphosphorylated substrate present in the crude cell extract were separated by capillary zone electrophoresis and detected with laser-induced fluorescence of the GFP tag. The identities of two electrophoretic peaks were confirmed by both phosphorylation of the substrate and dephosphorylation of the product in vitro. The proposed method was applied to monitoring the activation of PKA in single myoblast cells. It advantageously allowed us to avoid microinjection of the substrate, the procedure that is both hard to perform and excessively invasive when applied to small mammalian cells.

8-Bromo Cyclic Adenosine Monophosphate↗

PubMed2003

Affinity analysis of a protein-aptamer complex using nonequilibrium capillary electrophoresis of equilibrium mixtures.

We propose a new method that allows the use of low-affinity aptamers as affinity probes in quantitative analyses of proteins. The method is based on nonequilibrium capillary electrophoresis of the equilibrium mixture (NECEEM) of a protein with its fluorescently labeled aptamer. In general, NECEEM of a protein with a fluorescently labeled aptamer generates an electropherogram with three characteristic features: two peaks and an exponential curve. Two peaks correspond to (i) the equilibrium amount of free aptamer in the equilibrium mixture and (ii) the amount of the protein-aptamer complex that remains intact at the time of detection. The exponential part is ascribed to the complex decaying during separation under nonequilibrium conditions. Simple analysis of the three features in experiments with known concentrations of the protein can be used for the determination of the equilibrium dissociation constant, Kd, of the aptamer-protein complex. Similar analysis of the three features in the experiment with unknown concentration of the protein and known Kd value allows the determination of the protein concentration. In this proof-of-principle work, the NECEEM method was applied to the analysis of thrombin using a fluorescein-labeled aptamer under the conditions at which the protein-aptamer complex completely decayed during the separation. We demonstrated that, despite the decay, as few as 4 x 10(6) molecules of the protein could be detected with NECEEM without sacrificing the accuracy. This sensitivity is comparable with that reported by others for the aptamer-based equilibrium method. Thus, the proposed NECEEM-based method allows the use of aptamers for highly sensitive affinity analysis of proteins even when protein-aptamer complexes are unstable.

Affinity Labels↗

PubMed2003

Non-equilibrium capillary electrophoresis of equilibrium mixtures--appreciation of kinetics in capillary electrophoresis.

We describe a new electrophoretic method (patent pending), Non-Equilibrium Capillary Electrophoresis of Equilibrium Mixtures (NECEEM), and demonstrate its application to the study of protein-DNA interactions. A single NECEEM experiment allows for the determination of equilibrium and kinetic parameters of protein-DNA complex formation. The equilibrium mixture is prepared by mixing protein and DNA; it contains three components: free protein, free DNA, and the protein-DNA complex. A small plug of such a mixture is injected onto a capillary and the three components are separated under non-equilibrium conditions using a run buffer that does not contain the components of the equilibrium mixture. The protein-DNA complex decays during the NECEEM separation; the resulting electropherograms contain characteristic peaks and exponential curves. A simple analysis of a single electropherogram reveals two parameters: the equilibrium dissociation constant of the protein-DNA complex and the monomolecular rate constant of complex decay. The bimolecular rate constant of complex formation can then be calculated as the ratio of the two experimentally-determined constants. NECEEM was applied to find the equilibrium and kinetic parameters of interaction between an E. coli single-stranded DNA binding protein and a fluorescently-labeled oligonucleotide. The constants determined by NECEEM are in good agreement with those obtained by other methods. The new method is simple, fast, and accurate. It can be equally applied to other non-covalent molecular complexes.

Animals↗

PubMed2002

Heterogeneity of protein labeling with a fluorogenic reagent, 3-(2-furoyl)quinoline-2-carboxaldehyde.

Fluorogenic reagents are used for protein labeling when high-sensitivity fluorescence detection is required. Similar to traditional labeling with activated fluorescent dyes, such as fluorescein isothiocyanate, a fluorogenic reaction is expected to change the physical-chemical properties of proteins. Knowledge of these changes may be essential for efficient separation and identification of labeled proteins. Here we studied the effect of labeling of myoglobin with a fluorogenic reagent on the acid-base properties of the protein. The fluorogenic reagent used was 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ). In slab-gel isoelectric focusing, we found that the labeling reaction generated at least six species with pI values lower than that of non-labeled myoglobin. These species can be identified as products of progressive labeling of myoglobin with one to six FQ molecules. The same series of FQ-labeled species were observed when the reaction products were analyzed by capillary zone electrophoresis. The comparison of experimental and theoretical pI values allowed us to elucidate the labeling pattern--the number of FQ molecules corresponding to each labeled product detected by isoelectric focusing.

Electrophoresis, Capillary↗

PubMed2002

Nonequilibrium capillary electrophoresis of equilibrium mixtures--a single experiment reveals equilibrium and kinetic parameters of protein-DNA interactions.

We introduce a novel electrophoretic method, nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM), and demonstrate its use for studying protein-DNA interactions. The equilibrium mixture of protein and DNA contains three components: free protein, free DNA, and the protein-DNA complex. A short plug of such a mixture is injected into the capillary, and the three components are separated under nonequilibrium conditions. The resulting electropherograms are composed of characteristic peaks and exponential curves. An easy nonnumerical analysis of a single electropherogram reveals two parameters: the equilibrium binding constant and the monomolecular rate constant of complex decay. The bimolecular rate constant of complex formation can then be calculated as the product of the two experimentally determined constants. NECEEM was applied to study the interaction between single-stranded DNA binding protein and a fluorescently labeled 15-mer oligonucleotide. It allowed us to measure for the first time the rate constant of complex decay for this important protein-DNA pair, k-1 = 0.03 s-1. The value of the equilibrium binding constant, Kb = 3.6 x 10-6 M-1, was in good agreement with those measured by other methods. As low as 10-18 mol of the protein was sufficient for the measurements. Thus, the new method is simple, informative, and highly sensitive. Moreover, it can be equally applied to other noncovalent protein-ligand complexes. These features of NECEEM make this method an indispensable tool in studies of macromolecular interactions. They also emphasize the potential role of NECEEM in the development of extremely sensitive protein assays using nucleotide aptamers.

DNA↗

PubMed2002

Measuring the activity of farnesyltransferase by capillary electrophoresis with laser-induced fluorescence detection.

Enzymatic farnesylation of oncogenic forms of Ras proteins is the initial step in a series of posttranslational modifications essential for Ras activity. The modification is catalyzed by the enzyme, protein farnesyltransferase (PFTase), which transfers a farnesyl moiety from farnesyl diphosphate to the protein. We employed capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection to develop a rapid and sensitive method for the determination of PFTase activity in vitro. The limited substrate specificity of PFTase allowed us to use a fluorescently labeled pentapeptide instead of a Ras protein as a substrate for the enzyme; the product of the enzymatic reaction was the farnesylated pentapeptide. The product was separated from the substrate by CE and quantified with LIF detection. Under optimal conditions, the separation was achieved within 10 min with a resolution of 86. The mass and concentration limits of detection for the farnesylated product were 10(-19) mol and 0.28 nM, respectively. By measuring the rate of accumulation of the farnesylated product, we were able to determine the kinetic parameters of the enzymatic reaction. For yeast PFTase as an enzyme and difluorocarboxyfluorescein-labeled GCVIA peptide as a substrate, the values of k(cat) and K(M) were found to be (3.1 +/- 0.3)x10(-3) s(-1) and (12.0 +/- 1.2) nuM, respectively. Our results suggest that CE-LIF can be efficiently used for the determination of enzymatic activity of PFTase in vitro. After minor modifications, the developed method can be also applied to other reactions of enzymatic prenylation of proteins.

Alkyl and Aryl Transferases↗