Biomedical subjects

S Van Aert

Publications and source records attributed to S Van Aert.

12 recordsLinked to original sources

PubMed2006

Electron channelling based crystallography.

Electron channelling occurs when the incident electron beam is parallel to the atom columns of an object, such as a crystal or a particular crystal defect. Then, the electrons are trapped in the electrostatic potential of an atom column in which they scatter dynamically. This picture provides physical insight and explains why a one-to-one correspondence is maintained between the exit wave and the projected structure, even in case of strong dynamical scattering. Moreover, the theory is very useful to invert the dynamical scattering, that is, to derive the projected structure from the exit wave. Finally, it can be used to determine the composition of an atom column with single atom sensitivity or to explain dynamical electron diffraction effects. In this paper, an overview of the channelling theory will be given together with some recent applications.

Journal Article↗

PubMed2006

Model-based quantification of EELS spectra: Including the fine structure.

An extension to model-based electron energy loss spectroscopy (EELS) quantification is reported to improve the possibility of modelling fine structure changes in electron energy loss spectra. An equalisation function is used in the energy loss near edge structure (ELNES) region to model the differences between a single atom differential cross section and the cross section for an atom in a crystal. The equalisation function can be shown to approximate the relative density of unoccupied states for the given excitation edge. On a set of 200 experimental h-BN spectra, this technique leads to statistically acceptable models resulting into unbiased estimates of relative concentrations and making the estimated precisions come very close to the Cramér-Rao lower bound (CRLB). The method greatly expands the useability of model-based EELS quantification to spectra with pronounced fine structure. Another benefit of this model is that one also gets an estimate of the unoccupied density of states for a given excitation edge, without having to do background removal and deconvolution, making the outcome intrinsically more reliable and less noisy.

Journal Article↗

PubMed2006

An efficient way of including thermal diffuse scattering in simulation of scanning transmission electron microscopic images.

We propose an improved image simulation procedure for atomic-resolution annular dark-field scanning transmission electron microscopy (STEM) based on the multislice formulation, which takes thermal diffuse scattering fully into account. The improvement with regard to the classical frozen phonon approach is realized by separating the lattice configuration statistics from the dynamical scattering so as to avoid repetitive calculations. As an example, the influence of phonon scattering on the image contrast is calculated and investigated. STEM image simulation of crystals can be applied with reasonable computing times to problems involving a large number of atoms and thick or large supercells.

Journal Article↗

PubMed2005

Maximum likelihood estimation of structure parameters from high resolution electron microscopy images. Part I: a theoretical framework.

This paper is the first part of a two-part paper on maximum likelihood (ML) estimation of structure parameters from electron microscopy images. In principle, electron microscopy allows structure determination with a precision that is orders of magnitude better than the resolution of the microscope. This requires, however, a quantitative, model-based method. In our opinion, the ML method is the most appropriate one since it has optimal statistical properties. This paper aims to provide microscopists with the necessary tools to apply this method so as to determine structure parameters as precisely as possible. It reviews the theoretical framework, including model assessment, the derivation of the ML estimator of the parameters, the limits to precision and the construction of confidence regions and intervals for ML parameter estimates. In a companion paper [Van Aert et al., Ultramicroscopy, this issue, 2005], a practical example will be worked out.

Journal Article↗

PubMed2005

Maximum likelihood estimation of structure parameters from high resolution electron microscopy images. Part II: a practical example.

This paper is the second part of a two-part paper on maximum likelihood (ML) estimation of structure parameters from electron microscopy images. In order to show the practical applicability of the theoretical methods described in the first part of this two-part paper, an experimental study of an aluminium crystal is presented. In this study, structure parameters, atom column distances in particular, are estimated from high-resolution transmission electron microscopy (HRTEM) images using the ML method. The necessary steps to be made in the application of this method will be worked out one by one, including model assessment, the computation of the ML parameter estimates, and the construction of confidence intervals for these parameter estimates.

Journal Article↗

PubMed2004

How to optimize the experimental design of quantitative atomic resolution TEM experiments?

A quantitative measure is proposed to evaluate and optimize the design of quantitative atomic resolution TEM experiments. It aims at precise measurement of unknown structure parameters. Specifically, the proposed measure quantifies the statistical precision with which positions of atom columns can be estimated. The optimal design is then given by the combination of microscope settings for which this precision is highest. The proposed measure is also used to find out if new instrumental developments improve the precision as compared to existing methods.

Microscopy, Electron↗

PubMed2004

Model based quantification of EELS spectra.

Recent advances in model based quantification of electron energy loss spectra (EELS) are reported. The maximum likelihood method for the estimation of physical parameters describing an EELS spectrum, the validation of the model used in this estimation procedure, and the computation of the attainable precision, that is, the theoretical lower bound on the variance of these estimates, are discussed. Experimental examples on Au and GaAs samples show the power of the maximum likelihood method and show that the theoretical prediction of the attainable precision can be closely approached even for spectra with overlapping edges where conventional EELS quantification fails. To provide end-users with a low threshold alternative to conventional quantification, a user friendly program was developed which is freely available under a GNU public license.

Arsenicals↗

PubMed2004

Physical limits on atomic resolution.

It is shown that the ultimate resolution is not limited by the bandwidth of the microscope but by the bandwidth (i.e., the scattering power) of the object. In the case of a crystal oriented along a zone axis, the scattering is enhanced by the channeling of the electrons. However, if the object is aperiodic along the beam direction, the bandwidth is much more reduced. A particular challenge are the amorphous objects. For amorphous materials, the natural bandwidth is that of the single atom and of the order of 1 angstrom(-1), which can be reached with the present generation of medium voltage microscopes without aberration correctors. A clear distinction is made between resolving a structure and refining, that is, between resolution and precision. In the case of an amorphous structure, the natural bandwidth also puts a limit on the number of atom coordinates that can be refined quantitatively. As a consequence, amorphous structures cannot be determined from one projection, but only by using atomic resolution tomography. Finally a theory of experiment design is presented that can be used to predict the optimal experimental setting or the best instrumental improvement. Using this approach it is suggested that the study of amorphous objects should be done at low accelerating voltage with correction of both spherical and chromatic aberration.

Crystallization↗

PubMed2003

Is atomic resolution transmission electron microscopy able to resolve and refine amorphous structures?

Atomic resolution transmission electron microscopy, even with an aberration free microscope, is only able to resolve and refine amorphous structures at the atomic level for very small foil thicknesses. Then, a precision of the order of 0.01 A is possible, but this may require long recording times, especially for light atoms. For larger thicknesses, amorphous structures can in principle only be resolved and refined using electron tomography.

Journal Article↗

PubMed2002

Optimal experimental design of STEM measurement of atom column positions.

A quantitative measure is proposed to evaluate and optimize the design of a high-resolution scanning transmission electron microscopy (STEM) experiment. The proposed measure is related to the measurement of atom column positions. Specifically, it is based on the statistical precision with which the positions of atom columns can be estimated. The optimal design, that is, the combination of tunable microscope parameters for which the precision is highest. is derived for different types of atom columns. The proposed measure is also used to find out if an annular detector is preferable to an axial one and if a C(s)-corrector pays off in quantitative STEM experiments. In addition, the optimal settings of the STEM are compared to the Scherzer conditions for incoherent imaging and their dependence on the type of object is investigated.

Journal Article↗

PubMed2001

Does a monochromator improve the precision in quantitative HRTEM?

This paper addresses the question as to what extent the incorporation of a monochromator in an electron microscope can enhance the performance of high resolution transmission electron microscopy (HRTEM). The monochromator will reduce the chromatic aberration, and hence the information limit, at the expense of beam current, leading to a decrease in signal intensity and a corresponding decrease in signal-to-noise ratio (SNR). Both aspects, information limit and SNR, have been included in a quantitative evaluation based on the statistical precision with which the position of an atom column can be estimated. It is shown that the effect of a monochromator on the attainable precision depends on the microscope and monochromator parameters, as well as on the characteristics of the object.

Journal Article↗

PubMedDate not supplied

High-resolution electron microscopy and electron tomography: resolution versus precision.

The performance of high-resolution electron microscopy and electron tomography is usually discussed in terms of two-point resolution, expressing the possibility of perceiving separately two image points of an object. However, the concept resolution obtains another meaning if one uses prior knowledge about the object and the imaging procedure in the form of a parametric model describing the expectations of the observations. The unknown parameters, such as the positions of the components in an object, can be measured quantitatively by fitting this model to the observations. Due to the statistical nature of the experiment, the resulting solutions for the positions of the components and therefore for the distance between the components will never be exact. An alternative to resolution is then the precision with which the distance can be measured. In the present paper, it is shown that the precision depends on the size of the components, the distance between the components, the resolution of the instrument, and the number of electron counts. For electron tomography, it also depends on the orientation of the object with respect to the rotation axis.

Image Processing, Computer-Assisted↗