Search PubMed⌕ Search

Biomedical subjects

S Valls

Publications and source records attributed to S Valls.

3 recordsLinked to original sources
PubMed2005

High-strength apatitic cement by modification with superplasticizers.

This study reports on a novel method to improve the strength of apatitic bone cements. The liquid phase of Biocement-H was modified with commercial superplasticizers. The results showed that small additions, i.e. 0.5 vol%, in the aqueous liquid phase improved the maximum compressive strength of Biocement-H (35 MPa) by 71%, i.e. 60 MPa. Moreover, the addition of high amounts of superplasticizers, i.e. 50 vol.%, allowed for a significant reduction of the liquid-to-powder ratio from 0.32 to 0.256 mL/g, without affecting the maximum strength and/or the workability of the cement. These results open up new ways to develop injectable and high-strength apatitic bone cements for load-bearing applications.

Bone Cements↗
PubMed2002

Leaching properties of stabilised/solidified cement-admixtures-sewage sludges systems.

One of the main objectives of this work is to present an effective alternative for the final destination of sludge from urban waste water treatment plants by its use as a component of mortar or concrete. A binding and stabilizing matrix of sludge-cement and sludge-cement-coal fly-ash was investigated and the effects of various percentages of waste and binder, on the behavior of sludge in the system are presented. Assessment of the environmental quality of the final product and the consequent guarantee of its use in the building industry demand that it meets a number of requisites, one of which is that the effluents extracted by water action should be contamination-free, or at least that the concentration of contaminants should be below certain pre-set limits. For this a number of leaching tests must be carried out, such as the Netherlands Leaching Test .

Cities↗