Biomedical subjects
Publications and source records attributed to S T Yang.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
An anaerobic thermophilic coculture consisting of a heterofermentative bacterium (Clostridium thermolacticum) and a homoacetogen (Moorella thermoautotrophica) was developed for acetic acid production from lactose and milk permeate. The fermentation kinetics with free cells in conventional fermentors and immobilized cells in a recycle batch fibrous-bed bioreactor were studied. The optimal conditions for the cocultured fermentation were found to be 58 degrees C and pH 6.4. In the free-cell fermentation, C. thermolacticum converted lactose to acetate, ethanol, lactate, H(2) and CO(2), and the homoacetogen then converted lactate, H(2), and CO(2) to acetate. The overall acetate yield from lactose ranged from 0.46 to 0.65 g/g lactose fermented, depending on the fermentation conditions. In contrast, no ethanol was produced in the immobilized-cell fermentation, and the overall acetate yield from lactose increased to 0.8-0.96 g/g lactose fermented. The fibrous-bed bioreactor also gave a higher final acetate concentration (up to 25. 5 g/L) and reactor productivity (0.18-0.54 g/L/h) as compared to those from the free-cell fermentation (final acetate concentration, 15 g/L; productivity, 0.06-0.08 g/L/h). The superior performance of the fibrous-bed bioreactor was attributed to the high cell density (20 g/L) immobilized in the fibrous-bed and adaptation of C. thermolacticum cells to tolerate a higher acetate concentration. The effects of yeast extract and trypticase as nutrient supplements on the fermentation were also studied. For the free-cell fermentation, nutrient supplementation was necessary for the bacteria to grow in milk permeate. For the immobilized-cell fermentation, plain milk permeate gave a high acetate yield (0.96 g/g), although the reactor productivity was lower than those with nutrient supplementation. Balanced growth and fermentation activities between the two bacteria in the coculture are important to the quantitative conversion of lactose to acetic acid. Lactate and hydrogen produced by C. thermolacticum must be timely converted to acetic acid by the homoacetogen to avoid inhibition by these metabolites.
Dynamic light scattering (DLS) is a useful technique for analyzing the size, shape, and other structural characteristics of protein molecules in solution. The effects of various environmental conditions on the structure and activity of Aspergillus oryzae beta-galactosidase were studied. DLS was used to determine protein particle size under various salt, pH, and temperature conditions. Changes in the activity and stability of this enzyme caused by different environmental conditions were found to correlate well with the size changes of the protein particles. This change in protein size can be attributed to protein unfolding and aggregation under extreme conditions. The presence of the enzyme substrate, lactose, in the protein solution greatly enhanced enzyme stability by inhibiting aggregation.
The cell seeding density and spatial distribution in a 3-D scaffold are critical to the morphogenetic development of an engineered tissue. A dynamic depth-filtration seeding method was developed to improve the initial cell seeding density and spatial distribution in 3-D nonwoven fibrous matrices commonly used as tissue scaffolds. In this work, trophoblast-like ED27 cells were seeded in poly(ethylene terephthalate) (PET) matrices with various porosities (0.85-0.93). The effects of the initial concentration of cells in the suspension used to seed the PET matrix and the pore size of the matrix on the resulting seeding density and subsequent cell proliferation and tissue development were studied. Compared to the conventional static seeding method, the dynamic depth-filtration seeding method gave a significantly higher initial seeding density (2-4 x 10(7) vs 4 x 10(6) cells/cm3), more uniform cell distribution, and a higher final cell density in the tissue scaffold. The more uniform initial cell spatial distribution from the filtration seeding method also led to more cells in S phase and a prolonged proliferation period. However, both uniform spatial cell distribution and the pore size of the matrices are important to cell proliferation and morphological development in the seeded tissue scaffold. Large-pore matrices led to the formation of cell aggregates and thus might reduce cell proliferation. The dynamic depth-filtration seeding method is better in providing a higher initial seeding density and more uniform cell distribution and is easier to apply to large tissue scaffolds. A depth-filtration model was also developed and can be used to simulate the seeding process and to predict the maximum initial seeding densities in matrices with different porosities.
The continuous production of murine granulocyte-macrophage colony-stimulating factor (GM-CSF) by recombinant yeast cells immobilized in a fibrous-bed bioreactor was studied. A high cell density of approximately 68 g/L and a GM-CSF productivity of approximately 3.5 mg/L.h were attained in the fibrous-bed bioreactor-fed with a rich (nonselective, pH 6.7) medium at a dilution rate of 0.16 h-1. The GM-CSF production was stable even though the fraction of plasmid-carrying cells in the reactor effluent gradually dropped below 5% over a period of 2 weeks. At the end of that period, the immobilized cells in the fibrous matrix still had a high fraction, approximately 26%, of plasmid-carrying cells. Similar results were obtained with reactors operated at 0.05 h-1 dilution rate and pH 4.0. Although the GM-CSF production was lower at pH 4, the reactor was stably operated for over 4 weeks without contamination or significant loss of productivity. The stable long-term GM-CSF production from the fibrous-bed bioreactor was attributed to the effect of cell immobilization on plasmid stability. Because GM-CSF production was growth-associated, as was found in batch fermentation with free cells, this stabilization effect cannot be attributed solely to the reduced cell growth in the immobilized cell environment. Plasmid-carrying cells were preferentially retained in the fibrous matrix, perhaps because their abilities to adhere to the fiber surface and to form cell aggregates were higher than those of plasmid-free cells.
An extractive fermentation process using an amine extractant and a hollow-fiber membrane extractor to selectively remove propionic acid from the fermentation broth was developed to produce propionate from lactose. Compared to the conventional batch fermentation, the extractive fermentation had a much higher productivity ( approximately 1 g/(L.h) or 5-fold increase), higher propionate yield (up to 0.66 g/g or more than 20% increase), higher final product concentration (75 g/L or higher), and higher product purity ( approximately 90%). Meanwhile, acetate and succinate productions in the extractive fermentation were significantly reduced. The improved fermentation performance can be attributed to the reduced product inhibition and a possible metabolic pathway shift to favor more propionic but less acetic and succinic acid production. The process was stable and gave consistent long-term performance over the 1. 5-month period studied. The effects of propionate concentration, pH, and amine content in the solvent on the extractive fermentation were also studied and are discussed in this paper.
Nonwoven polyethylene teraphathalate (PET) fabrics with different porosities and knitted fabric were used as support matrixes to grow human trophoblast cells to study the spatial effects of fibrous matrix on cell adhesion, spatial organization, proliferation, and metabolic functions. In general, cells grown on 2-D surface and knitted fabric had faster metabolic rates and also showed higher proliferation activities as detected by cyclin B assay. For nonwoven PET fibers, matrix porosity had profound effects on cell morphology, spatial organization, and proliferation. Cells grown in a low-porosity fibrous matrix formed small aggregates ( approximately 100 cells per aggregate), whereas cells grown in high-porosity matrix formed big aggregates ( approximately 1000 cells per aggregate). This was attributed to the difference in pore volume or averaged fiber distance, which dictated a cell's ability to cross over and form a bridge between adjacent fibers. The high-porosity matrix had a relatively poor surface accessibility for cells to attach and spread, which are essential for cell proliferation. Dual staining with PI and BrdU showed that 60% of cells in the small aggregates found in the low-porosity matrix were proliferating, while only 18% of cells in the large aggregates found in the high-porosity matrix were proliferating. These results suggest that spatial characteristics of fibrous matrix are important to cell proliferation and function and should be considered in tissue-engineering human cells.
The authors present a case of fetus-in-fetu in which the CT findings are compatible with an earlier description by Nocera et al., i.e., a "round or tubular collection of very low density fat surrounding a central bony structure (probably one of the legs)." Additionally, sonography showed a heterogeneous mass with limb-like structures in the left lateral ventricle. Plain films can confirm the presence of a vertebral column and identify specific bony structures, but CT is a valuable aid in cases where plain films were not obtained or are inconclusive.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
BACKGROUND: The objective of this study is to reassess the validity of plain film diagnosis for pediatric intussusception with consideration of the combinations of radiologic findings. METHODS: Sixty-six cases of intussusception and 81 controls of gastroenteritis were collected. Their films were read blindly by three radiologists together, with emphasis on nine radiologic findings: sparse colon gas (F1), sparse fecaloid content in colon (F2), gas-filled small bowel loops in right hypochondrium (F3), small bowel obstruction (F4), difficulty in assessing cecum position (F5), pneumoperitoneum (F6), discernible mass lesion (F7), target sign (F8) and crescent sign (F9). The sensitivity and specificity of individual findings and combinations of findings were analyzed. RESULTS: No cases showed F6. Listed in decreasing order of sensitivity, the other eight findings were F1, F5, F2, F7, F3, F4, F9 and F8. The sensitivity and specificity of these eight findings were inversely proportional with significant p-values (F8: < 0.005; the other seven findings: < 0.001). Sixty-three films (95%) in case group displayed combination of at least three radiologic findings. If the diagnostic criteria must consist of at least three radiologic findings, 60 cases (74%) of control group can be excluded. CONCLUSIONS: After eliminating the confounding effect of small bowel obstruction on the percentage of gas-filled small bowel loops in right hypochondrium and excluding the data agreed by only one radiologist from the study by Ratcliffe et al, the results of plain film findings were consistent with those of previous reports. The plain abdominal film can play an active role in the diagnosis of pediatric intussusception. Its validity increases when combinations of radiologic findings rather than individual signs are emphasized.