Search PubMed⌕ Search

Biomedical subjects

S Sivanesan

Publications and source records attributed to S Sivanesan.

At least 19 recordsLinked to original sources
PubMed2006

Production of biogas from municipal solid waste with domestic sewage.

In this study, experiments were conducted to investigate the production of biogas from municipal solid waste (MSW) and domestic sewage by using anaerobic digestion process. The batch type of reactor was operated at room temperature varying from 26 to 36 degrees C with a fixed hydraulic retention time (HRT) of 25 days. The digester was operated at different organic feeding rates of 0.5, 1.0, 2.3, 2.9, 3.5 and 4.3kg of volatile solids (VS)/m(3) of digester slurry per day. Biogas generation was enhanced by the addition of domestic sewage to MSW. The maximum biogas production of 0.36m(3)/kg of VS added per day occurred at the optimum organic feeding rate of 2.9kg of VS/m(3)/day. The maximum reduction of total solids (TS) (87.6%), VS (88.1%) and chemical oxygen demand (COD) (89.3%) occurred at the optimum organic loading rate of 2.9kg of VS/m(3)/day. The quality of biogas produced during anaerobic digestion process was 68-72%.

Bioreactors↗
PubMed2006

Surface ozone measurements at urban coastal site Chennai, in India.

The present study was carried out to gain knowledge of current surface ozone concentrations and the effects of meteorological parameters in the highly populated urban area of Chennai, in South India. We have reported measurement results of surface ozone (O(3)) and meteorological parameters from 17th March to 10th October 2005. A photometric ozone analyzer continuously recorded the ozone concentrations at this site. The present study deals with the statistical characteristics of daily and monthly mean ozone levels under different meteorological conditions. The highest ozone concentrations were recorded in ESE-SE sectors. The monthly mean concentrations were higher in May (23+/-14 ppb) and lower in April at this site (10+/-8 ppb). The maximum hourly ozone concentration reached 69 ppb on 21st April.

Cities↗
PubMed2006

Equilibrium studies for the adsorption of acid dye onto modified hectorite.

The adsorption of Acid dye, C.I. Acid Red 151 from aqueous solution onto modified hectorite at different concentrations and pH has been studied. Hectorite clay has been modified using two cationic surfactants, cetyldimethylbenzylammonium chloride and cetylpyridinium chloride. Present experimental study shows that acidic pH favours enhanced adsorption. The adsorption isotherms are described by means of Langmuir and Freundlich isotherms. The adsorption capacity has been found to be 208.33 and 169.49 mg g(-1) for the modified cetyldimethylbenzylammonium chloride-hectorite (CDBA-hect) and cetylpyridinium chloride (CP-hect), respectively.

Adsorption↗
PubMed2006

Pseudo second order kinetics and pseudo isotherms for malachite green onto activated carbon: comparison of linear and non-linear regression methods.

Pseudo second order kinetic expressions of Ho, Sobkowsk and Czerwinski, Blanachard et al. and Ritchie were fitted to the experimental kinetic data of malachite green onto activated carbon by non-linear and linear method. Non-linear method was found to be a better way of obtaining the parameters involved in the second order rate kinetic expressions. Both linear and non-linear regression showed that the Sobkowsk and Czerwinski and Ritchie's pseudo second order model were the same. Non-linear regression analysis showed that both Blanachard et al. and Ho have similar ideas on the pseudo second order model but with different assumptions. The best fit of experimental data in Ho's pseudo second order expression by linear and non-linear regression method showed that Ho pseudo second order model was a better kinetic expression when compared to other pseudo second order kinetic expressions. The amount of dye adsorbed at equilibrium, q(e), was predicted from Ho pseudo second order expression and were fitted to the Langmuir, Freundlich and Redlich Peterson expressions by both linear and non-linear method to obtain the pseudo isotherms. The best fitting pseudo isotherm was found to be the Langmuir and Redlich Peterson isotherm. Redlich Peterson is a special case of Langmuir when the constant g equals unity.

Adsorption↗
PubMed2006

Air quality monitoring in Chennai, India, in the summer of 2005.

During the summer of 2005, concentrations of surface ozone (O(3)), oxides of nitrogen (NO(x)), respirrable suspended particulate matter (RSPM) and total suspended particulate matter (TSPM), relative humidity (RH), wind speed (WS) and wind direction (WD) were collected over successive periods of about 24 h at five sites. UV photometric ozone analyzer was used to measure the concentration of surface O(3). The study deals with the characteristics of hourly and daily mean surface O(3) under different climatic conditions, such as temperature, relative humidity, wind speed and wind direction and other pollutant concentrations. The maximum hourly O(3) concentration reached 53 ppb on 17th May. The ground-level O(3) concentration in Chennai varied between 2 and 53 ppb. The concentration of NO(x) and O(3) were below the prescribed limits. The TSPM values were exceeded the National Ambient Air Quality Standards (NAAQS) at Koyambedu, Mandaveli, Taramani and Vallalar Nagar study area.

Air Pollution↗
PubMed2006

Equilibrium data, isotherm parameters and process design for partial and complete isotherm of methylene blue onto activated carbon.

Equilibrium data for the adsorption of methylene blue onto activated carbon was reported. The equilibrium data were splitted to different data sets to have an idea on the partial and complete isotherm. The equilibrium data were analyzed using Freundlich, Langmuir and Redlich-Peterson isotherm. The influence of partial isotherm and complete isotherm on the equilibrium parameters in isotherm expression were estimated. Equilibrium data covering the complete isotherm is the best way to obtain the parameters in isotherm expressions. Present investigation showed that for successful batch sorber design, equilibrium data with partial isotherm is not sufficient, instead equilibrium data that covers complete isotherm is required. Redlich-Peterson and Langmuir isotherm well represent the adsorption of methylene blue onto activated carbon. Redlich-Peterson isotherm is a special case of Langmuir when the constant 'g' equals unity.

Carbon↗
PubMed2006

Selection of optimum sorption kinetics: comparison of linear and non-linear method.

Comparison of linear least-squares method and a trial and error non-linear method of estimating the kinetic parameters was examined to the experimental data of methylene blue onto activated carbon. Two most commonly used kinetic equations first order kinetics and pseudo second order kinetics was used to analyze the experimental data. The four different form of Ho's pseudo second order kinetic was also discussed. Present investigation showed that the non-linear analysis method as more appropriate method to determine the rate kinetic parameters.

Adsorption↗
PubMed2005

Adsorption of acid dye onto organobentonite.

Removal of Acid Red 151 from aqueous solution at different dye concentrations, adsorbent doses and pH has been studied. The bentonite clay has been modified using cationic surfactants, which has been confirmed using XRD and FT-IR analyses. Experimental result has shown that the acidic pH favours the adsorption. The adsorption isotherms are described by means of Langmuir and Freundlich isotherms. The adsorption capacity has been found to be 357.14 and 416.66 mg g(-1) for the cetyldimethylbenzylammonium chloride-bentonite (CDBA-bent) and cetylpyridinium chloride-bentonite (CP-bent), respectively. Kinetic studies show that the adsorption followed second-order kinetics.

Adsorption↗
PubMed2005

Isotherm parameters for basic dyes onto activated carbon: comparison of linear and non-linear method.

Equilibrium sorption experiments were carried out at 305 K with four different basic dyes basic red 9 (BR9), basic violet 3 (BV3), basic brown 1 (BB1) and basic violet 10 (BV10) onto activated carbon. The isotherm parameters were estimated linear and non-linear regression analysis. Non-linear method was found to be more appropriate method for estimating the isotherm parameters. The sorption capacity of activated carbon to uptake cationic dye ions in the increasing order was given by: BR9 (131 mg/g)< BV3 (247 mg/)< BV10 (259 mg/)< BB1 (404 mg/g).

Adsorption↗
PubMed2005

Comparison of linear and non-linear method in estimating the sorption isotherm parameters for safranin onto activated carbon.

Comparison analysis of linear least square method and non-linear method for estimating the isotherm parameters was made using the experimental equilibrium data of safranin onto activated carbon at two different solution temperatures 305 and 313 K. Equilibrium data were fitted to Freundlich, Langmuir and Redlich-Peterson isotherm equations. All the three isotherm equations showed a better fit to the experimental equilibrium data. The results showed that non-linear method could be a better way to obtain the isotherm parameters. Redlich-Peterson isotherm is a special case of Langmuir isotherm when the Redlich-Peterson isotherm constant g was unity.

Charcoal↗
PubMed2005

Prediction of optimum sorption isotherm: comparison of linear and non-linear method.

Equilibrium parameters for Bismarck brown onto rice husk were estimated by linear least square and a trial and error non-linear method using Freundlich, Langmuir and Redlich-Peterson isotherms. A comparison between linear and non-linear method of estimating the isotherm parameters was reported. The best fitting isotherm was Langmuir isotherm and Redlich-Peterson isotherm equation. The results show that non-linear method could be a better way to obtain the parameters. Redlich-Peterson isotherm is a special case of Langmuir isotherm when the Redlich-Peterson isotherm constant g was unity.

Adsorption↗
PubMed2005

Modeling the mechanism involved during the sorption of methylene blue onto fly ash.

Batch sorption experiments were carried out to remove methylene blue from its aqueous solutions using fly ash as an adsorbent. Operating variables studied were initial dye concentration, fly ash mass, pH, and contact time. Maximum color removal was observed at a basic pH of 8. Equilibrium data were represented well by a Langmuir isotherm equation with a monolayer sorption capacity of 5.718 mg/g. Sorption data were fitted to both Lagergren first-order and pseudo-second-order kinetic models and the data were found to follow pseudo-second-order kinetics. Rate constants at different initial concentrations were estimated. The process mechanism was found to be complex, consisting of both surface adsorption and pore diffusion. The effective diffusion parameter D(i) values were estimated at different initial concentrations and the average value was determined to be 2.063 x 10(-9)cm2/s. Analysis of sorption data using a Boyd plot confirms the particle diffusion as the rate-limiting step for the dye concentration ranges studied in the present investigation (20 to 60 mg/L).

Journal Article↗
PubMed1999

Flow patterns in the radiocephalic arteriovenous fistula: an in vitro study.

A significant number of late failures of arteriovenous fistulae for haemodialysis access are related to the progression of intimal hyperplasia. Although the aetiology of this process is still unknown, the geometry of the fistula and the local haemodynamics are thought to be contributory factors. An in-vitro study was carried out to investigate the local haemodynamics in a model of a Cimino-Brescia arteriovenous (AV) fistula with a 30 degrees anastomotic angle and vein-to-artery diameter ratio of 1.6. Flow patterns were obtained by planar illumination of micro-particles suspended in the fluid. Steady and pulsatile flow studies were performed over a range of flow conditions corresponding to those recorded in patients. Quantitative measurements of wall shear stress and turbulence were made using laser Doppler anemometry. The flow structures in pulsatile flow were similar to those seen in steady flow with no significant qualitative changes over the cardiac cycle. This was probably the result of the low pulsatility index of the flow waveform in AV fistulae. Turbulence was the dominant feature in the vein, with relative turbulence intensity > 0.5 within 10 mm of the suture line decreasing to a relatively constant value of about 0.10-0.15 between 40 and 70 mm from the suture line. Peak and mean Reynolds shear stress of 15 and 20 N/m2, respectively, were recorded at the suture line. On the floor of the artery, peak values of temporal mean and oscillating wall shear stress of 9.22 and 29.8 N/m2, respectively. In the vein, both mean and oscillating wall shear stress decreased with distance from the anastomosis.

Arteriovenous Shunt, Surgical↗
PubMed1999

Sites of stenosis in AV fistulae for haemodialysis access.

BACKGROUND: A large proportion of late failures of radiocephalic arteriovenous fistulae are related to the progression of intimal hyperplasia. The aetiology of this process is still unknown but the fistula configuration and resultant haemodynamics have been implicated. This clinical study was devised to identify sites of stenosis in patients with fistulae and relate the findings to various clinical and geometrical parameters. METHOD: Measurement of anastomotic length and angle was made intraoperatively in 25 consecutive fistulae. Post-operative assessment was carried out at regular intervals using duplex and colour-flow ultrasonography. RESULTS: Stenoses were present in all 25 of the fistulae studied at 3 months. The stenoses could be classified to three specific sites: at the anastomosis (Type 1), on the inner wall of the curved region of the cephalic vein (Type 2) and just proximal to this curved segment where the vein straightens out (Type 3). Most of Type 1 and Type 2 stenoses were not progressive while Type 3 stenoses were generally progressive. CONCLUSION: These findings emphasize the need for an effective surveillance programme of AV fistulae.

Adult↗
PubMed1999

Computer aided design and fabrication of models for in vitro studies of vascular fluid dynamics.

An integrated computer aided design/computer aided manufacture system has been used to model the complex geometry of blood vessel anastomoses. Computer models are first constructed with key dimensions derived from radiological images of bypass grafts, and from casts of actual blood vessel anastomoses. Physical models are then fabricated in one of two ways: the surface geometry data can be used to control the movement of a three-axis milling machine; alternatively, the same data can be exported in a form that can be interpreted by a stereolithography apparatus. Both methods produce geometrically defined solid investments that can be used in a multistep casting process that yields high-quality physical models for vascular fluid dynamic studies. This technique is useful for parametric studies.

Anastomosis, Surgical↗
PubMed1998

Characterizing flow distributions in AV fistulae for haemodialysis access.

BACKGROUND: The arteriovenous fistula is the most widely used means of enabling vascular access for chronic haemodialysis. When interest in vascular access was at its height, in the 1970s, a substantial amount of work was carried out on the physiology of arteriovenous fistulae and on the relationship between fistula flow and patency. One omission in the catalogue of studies was research into the distribution of flow in the fistula and the effects on surgical outcome. METHOD: To address this issue, 30 patients with end-to-side radiocephalic fistulae were studied. Flow measurements were made intraoperatively, and at various intervals postoperatively using colour-flow ultrasonography. RESULTS: In 22 cases, the development of the fistula was monitored at regular intervals for periods of up to 27 months. In seven of the 30 fistulae, flow in the distal artery was antegrade, while in the remaining 23, distal artery flow was retrograde. The proportion of fistula flow supplied by the proximal and distal arteries varied considerably. CONCLUSION: Despite the wide range of flow distributions in the fistulae studied, flow distribution did not appear to affect fistula maturation or long-term function.

Adult↗