Search PubMed⌕ Search

Biomedical subjects

S S Davis

Publications and source records attributed to S S Davis.

At least 19 recordsLinked to original sources
PubMed2006

Distribution and clearance of bioadhesive formulations from the olfactory region in man: effect of polymer type and nasal delivery device.

There is an increasing need to identify novel approaches by which to improve the efficiency of drug transport from the nasal cavity (olfactory region) to the CNS, especially for treatment of central nervous system disorders. It is suggested, that one approach is the combination of active targeting of a bioadhesive formulation, that will retain the drug at the absorption site, potentially in combination with, an absorption enhancer. Two low methylated pectins, LM-5 and LM-12 were selected for evaluation as drug delivery systems, due to their ability to gel in the nasal cavity and their bioadhesive characteristics, together with chitosan G210, which acts both as a bioadhesive material and as an efficient absorption enhancer. It was found that all of the bioadhesive formulations were able to reach the olfactory region in the nasal cavity of human volunteers when delivered using a simple nasal drop device. Furthermore, the formulations displayed a significantly increased residence time on the epithelial surface. This was in contrast to a non-bioadhesive control delivered with the same device. In contrast, a pectin formulation administered with a nasal spray system did not show an increase in residence time in the olfactory region. It was further shown that the reproducibility of olfactory delivery of a polymer formulation was significantly better intra-subject than inter-subject.

Adhesives↗
PubMed2005

Heating and humidifying of carbon dioxide during pneumoperitoneum is not indicated: a prospective randomized trial.

BACKGROUND: Carbon dioxide (CO2) pneumoperitoneum usually is created by a compressed gas source. This exposes the patient to cool dry gas delivered at room temperature (21 degrees C) with 0% relative humidity. Various delivery methods are available for humidifying and heating CO2 gas. This study was designed to determine the effects of heating and humidifying gas for the intraabdominal environment. METHODS: For this study, 44 patients undergoing laparoscopic Roux-en-Y gastric bypass were randomly assigned to one of four arms in a prospective, randomized, single-blinded fashion: raw CO2 (group 1), heated CO2 (group 2), humidified CO2 (group 3), and heated and humidified CO2 (group 4). A commercially available CO2 heater-humidifier was used. Core temperatures, intraabdominal humidity, perioperative data, and postoperative outcomes were monitored. Peritoneal biopsies were taken in each group at the beginning and end of the case. Biopsies were subjected staining protocols designed to identify structural damage and macrophage activity. Postoperative narcotic use, pain scale scores, recovery room time, and length of hospital stay were recorded. One-way analysis of variance (ANOVA) and the nonparametric Kruskal-Wallis test were used to compare the groups. RESULTS: Demographics, volume of CO2 used, intraabdominal humidity, bladder temperatures, lens fogging, and operative times were not significantly different between the groups. Core temperatures were stable, and intraabdominal humidity measurements approached 100% for all the patients over the entire procedure. Total narcotic dosage and pain scale scores were not statistically different. Recovery room times and length of hospital stay were similar in all the groups. Only one biopsy in the heated-humidified group showed an increase in macrophage activity. CONCLUSIONS: The intraabdominal environment in terms of temperature and humidity was similar in all the groups. There was no significant difference in the intraoperative body temperatures or the postoperative variable measured. No histologic changes were identified. Heating or humidifying of CO2 is not justified for patients undergoing laparoscopic bariatric surgery.

Abdomen↗
PubMed2003

Nasal delivery of chitosan-DNA plasmid expressing epitopes of respiratory syncytial virus (RSV) induces protective CTL responses in BALB/c mice.

Respiratory syncytial virus (RSV), an important pathogen of the lower respiratory tract, is responsible for severe illness both in new born and young children and in elderly people. Due to complications associated with the use of the early developed vaccines, there is still a need for an effective vaccine against RSV. Most pathogens enter the body via mucosal surfaces and therefore vaccine delivery via routes such as the nasal, may well prove to be superior in inducing protective immune responses against respiratory viruses, since both local and systemic immunity can be induced by nasal immunisation. Previously we have shown that intradermal immunisation of a plasmid DNA encoding the CTL epitope from the M2 protein of RSV induced protective CTL responses. In the present study, the mucosal delivery of plasmid DNA formulated with chitosan has been investigated. Chitosan is a polysachharide consisting of copolymers of N-acetylglucosamine and glucosamine that is derived from chitin, a material found in the shells of crustacea. Intranasal immunisation with plasmid DNA formulated with chitosan induced peptide- and virus-specific CTL responses in BALB/c mice that were comparable to those induced via intradermal immunisation. Following RSV challenge of chitosan/DNA immunised mice, a significant reduction (P<0.001) in the virus load was observed in the lungs of immunised mice compared to that in the control group. These results indicate the potential of immunisation with chitosan-formulated epitope-based vaccines via the intranasal route.

Animals↗
PubMed2003

The effect of blood sampling site and physicochemical characteristics of drugs on bioavailability after nasal administration in the sheep model.

PURPOSE: Investigate the effect of blood sampling site and physicochemical characteristics of drugs on the pharmacokinetic (PK) parameters obtained after intravenous and nasal administration in sheep and compare results with computer simulations. METHODS: Three drugs, insulin, morphine, and nicotine, were administered nasally and by intravenous (IV) injection to sheep, and serial blood samples collected concurrently from the carotid artery (insulin, morphine) or cephalic vein (nicotine) and jugular vein. Plasma drug concentrations were measured, and pharmacokinetic and statistical analyses performed, to evaluate sampling site differences. RESULTS: After nasal insulin, bioavailabilities calculated from the two blood sampling site data were comparable. In contrast, apparent bioavailabilities following nasal morphine or nicotine were significantly higher when sampling was from the jugular vein. These results were supported by computer simulations. These observations are attributed to the greater effects of noninstantaneous mixing of drugs for jugular vein sampling following nasal dosing, compared to the other sampling sites, which is significant for drugs that are rapidly and well absorbed and that have a high volume of distribution (Vd). CONCLUSION: The results clearly show that the characteristics of the drug and the blood sampling site can have a significant effect on the pharmacokinetic results obtained after nasal administration in sheep.

Absorption↗
PubMed2002

Development of a novel nasal nicotine formulation comprising an optimal pulsatile and sustained plasma nicotine profile for smoking cessation.

A novel nasal formulation, in the form of a nicotine-Amberlite resin complex powder has been developed that provided an optimal combined pulsatile and sustained plasma nicotine profile for smoking cessation. The adsorption isotherms of nicotine hydrogen tartrate salt on two types of Amberlite resins (IRP69 and IR120) were evaluated and the subsequent in vitro release properties of nicotine from the nicotine-Amberlite complex powders were tested using a Franz diffusion cell. Amberlite IRP69 and Amberlite IR120 are similar cationic exchange materials with the same ion-exchange capacity but due to a smaller particle size range (10-150 microm) Amberlite IRP69 had a better flow property and a better adsorptive capacity than Amberlite IR120. The material is used as an excipient in marketed pharmaceutical formulations. The highly water soluble salt, nicotine hydrogen tartrate, displayed good adsorption onto both types of Amberlite resin. The maximum adsorption of nicotine onto Amberlite IRP69 was 1.071 mg drug per mg resin. The cumulative release of drug from nicotine hydrogen tartrate-Amberlite complex powders showed that the higher the drug loading, the faster was the rate of release of the drug. Based on these results, various nicotine hydrogen tartrate-Amberlite IRP69 powder formulations containing different ratios of free to bound drug (50% to 100% bound) and a control solution were prepared and evaluated in a sheep model by nasal administration. The nicotine plasma profiles demonstrated that an initial rapid peak plasma level of nicotine followed by a sustained elevated level could be achieved by adjusting the ratio of free to bound nicotine in the Amberlite powder formulation. The curves obtained from some of the formulations were comparable to those predicted from a computer-generated pharmacokinetic model.

Administration, Intranasal↗
PubMed2002

Intranasal delivery of morphine.

Morphine administered nasally to humans as a simple solution is only absorbed to a limited degree, with a bioavailability of the order of 10% compared with intravenous administration. This article describes the development of novel nasal morphine formulations based on chitosan, which, in the sheep model, provide a highly increased absorption with a 5- to 6-fold increase in bioavailability over simple morphine solutions. The chitosan-morphine nasal formulations have been tested in healthy volunteers in comparison with a slow i.v. infusion (over 30 min) of morphine. The results show that the nasal formulation was rapidly absorbed with a T(max) of 15 min or less and a bioavailability of nearly 60%. The shape of the plasma profile for nasal delivery of the chitosan-morphine formulation was similar to the one obtained for the slow i.v. administration of morphine. Furthermore, the metabolite profile obtained after the nasal administration of the chitosan-morphine nasal formulation was essentially identical to the one obtained for morphine administered by the intravenous route. The levels of both morphine-6-glucuronide and morphine-3-glucuronide were only about 25% of that found after oral administration of morphine. It is concluded that a properly designed nasal morphine formulation (such as one with chitosan) can result in a non-injectable opioid product capable of offering patients rapid and efficient pain relief.

Absorption↗
PubMed2002

[Preparation and characterization of prednisolone-poly (hydroxybutyrate-co-hydroxyvalerate) nanoparticles].

AIM: To optimize the preparation of sustained release prednisolone-poly (hydroxybutyrate-cohydroxyvalerate) (PNS-PHBV) nanospheres (NP) using the novel biodegradable materials PHBV as the carriers and PNS as a model drug. METHODS: PNS-PHBV nanospheres were prepared by ultrasonic-emulsion technique. The diameter, its distribution and Zeta potential on the surface of particles were measured by means of Zetasizer. RESULTS: The diameter of NP is in the range of 50-250 nm. The drug loading of NP increases but incorporation efficiency and Zeta potential dramatically decrease with increasing ratio of the feeding quantities of drug to those of carriers. The drug release behavior in vitro appeared to have biphasic characteristics with initial burst effect. The more burst effect, the less the diameters of nanoparticles. The longest release time was up to 32 h. CONCLUSION: The technology of preparation is reasonable and PNS-PHBV nanoparticle showed significant sustained release.

Anti-Inflammatory Agents↗
PubMed2001

The effect of surface coverage and conformation of poly(ethylene oxide) (PEO) chains of poloxamer 407 on the biological fate of model colloidal drug carriers.

Poloxamer 407 was adsorbed onto the surface of model colloidal drug carriers, polystyrene nanoparticles of 40, 70 and 137 nm in diameter, and the effect of the degree of surface coverage and the conformation of the poly(ethylene oxide) (PEO) chains on biological fate was studied. The relationship between the physicochemical and the biological properties of the nanoparticle systems was also investigated. The adsorbed layer of poloxamer 407 was characterised in terms of percentage surface coverage, thickness of the adsorbed layer and average surface area per PEO chain. Computer modelling of the adsorbed layer was performed (applying the self-consistent field technique), to obtain the structural information of the PEO chains in the layer. The in vitro interaction of the nanoparticles with different degrees of poloxamer 407 surface coverage with serum components and the in vivo biodistribution in the rat model were assessed. The results demonstrated that an increase in the surface coverage with poloxamer 407 resulted in an increased volume fraction of the PEO in the adsorbed layer, further extension of the PEO chains from the surface and closer packing of the chains at the surface. With regard to the interaction with the serum components, an increased surface coverage resulted in a reduction of the amount of serum proteins adsorbed, and, importantly, affected the type of proteins adsorbed. High molecular weight proteins were not adsorbed onto the nanoparticles with a surface coverage above approx. 25%. Following the intravenous administration to rats, even the nanoparticles with the lowest degree of surface coverage (approx. 5%) showed improved circulation profiles relative to the uncoated nanoparticles. The effect was more pronounced for the 40 nm nanoparticles. A further increase in the surface coverage to approx. 25% resulted in a significant increase in circulation time, as compared to uncoated and 5% coated systems, for all sizes of nanoparticles. Importantly, it was found that a long in vivo blood circulation time could be achieved for nanoparticles with a relatively low degree of surface coverage with PEO chains.

Adsorption↗
PubMed2001

Nasal vaccines.

The nasal route for vaccination offers some important opportunities, especially for the prophylaxis of respiratory diseases. Vaccination via the respiratory tract is reviewed and the deposition and clearance of antigens in the deep lung and nose are described and contrasted. Lymphoid structures in the respiratory tract differ according to species; the rat and mouse have a well developed nose-associated lymphoid tissue, while in man, the structure known as Waldeyer's ring (that includes the tonsils), is important as an induction site. The immune response following intranasal administration can provide protection at the administration site and at various effector sites as part of the common mucosal immune system. A number of formulation considerations are important when designing novel systems for nasal administration as are physiological factors such as mucociliary clearance.

Administration, Intranasal↗
PubMed2001

Chitosan as a novel nasal delivery system for vaccines.

A variety of different types of nasal vaccine systems has been described to include cholera toxin, microspheres, nanoparticles, liposomes, attenuated virus and cells and outer membrane proteins (proteosomes). The present review describes our work on the use of the cationic polysaccharide, chitosan as a delivery system for nasally administered vaccines. Several animal studies have been carried out on influenza, pertussis and diphtheria vaccines with good results. After nasal administration of the chitosan-antigen nasal vaccines it was generally found that the nasal formulation induced significant serum IgG responses similar to and secretory IgA levels superior to what was induced by a parenteral administration of the vaccine. Animals vaccinated via the nasal route with the various chitosan-antigen vaccines were also found to be protected against the appropriate challenge. So far the nasal chitosan vaccine delivery system has been tested for vaccination against influenza in human subjects. The results of the study showed that the nasal chitosan influenza vaccine was both effective and protective according to the CPMP requirements. The mechanism of action of the chitosan nasal vaccine delivery system is also discussed.

Administration, Intranasal↗
PubMed2001

Polymeric lamellar substrate particles for intranasal vaccination.

In recent years, several strategies have been under investigation to achieve safe and effective immunisation, in terms of new antigens, adjuvants and routes of vaccination. The latter include mucosal sites such as oral, rectal, vaginal and nasal. Biodegradable microparticles produced from polymers such as poly(D,L-lactide) (PLA) and poly(D,L-lactide-co-glycolide) (PLGA) containing encapsulated vaccine antigens have been extensively studied for immunisation. These microparticles allow controlled release of vaccines with the aim to develop as single dose vaccines. However there are concerns regarding the integrity and immunogenicity of the antigen during the encapsulation process when the antigen is exposed to organic solvents, high shear stresses and the exposure of antigen to low pH which is caused by polymer degradation. Polymeric lamellar substrate particles (PLSP) produced by simple precipitation of PLA, form a novel polymeric system for the adsorption of antigens. This procedure avoids pH changes, exposure to organic solvents and hence allows the integrity of the antigen to be retained. The aim of this article is to discuss the factors affecting the characteristics of PLSP and adsorption of antigens onto PLSP and consider their potential as adjuvants for the nasal delivery of protein, peptide or viral vaccines.

Administration, Intranasal↗
PubMed2001

Drug-polyionic block copolymer interactions for micelle formation: physicochemical characterisation.

While covalent attachment of small drug molecules to AB copolymers for the formation of polymeric micelles for drug delivery has been investigated, few studies have focused on non-covalent interactions. The aim of this study was therefore to explore the potential of non-covalent interactions between an AB copolymer, Poly(aspartic acid)-poly(ethylene glycol) (Pasp-PEG), with anionic pendant groups and diminazene aceturate, a small molecular weight cationic drug. Micelles were prepared by mixing solutions of Pasp-PEG and diminazene in 25 mM Tris-HCl buffer. At all Pasp-PEG concentrations studied, the micelles appeared to be water soluble with a unimodal size distribution and ranged in size from approximately 22 to 60 nm. The polyionic micelles also displayed similar and small absolute zeta potential values at various drug:monomer molar ratios which confirmed stabilisation by the PEG corona. The scattering intensity was maximal and remained unchanged, while particle size increased slightly at pH range from 3.4 to 7.2. At this pH range both the polymer and drug would be ionised and ionic interactions possible to drive micellar formation. An increase in size and scattering intensity with addition of NaCl to the micelles was attributed to dehydration of the PEG corona which may have led to aggregation of the micelles. The absence of micellar dissociation upon addition of salt was attributed to the dominance of hydrogen bonding between Pasp and diminazene aceturate, as assessed by isothermal titration microcalorimetry. Morphological evaluation of these constructs showed them to be discrete and fairly uniform in size and shape. This study was therefore successful in confirming the potential of non-covalent interactions using an AB copolymer to form polyionic micelles for drug delivery.

Drug Delivery Systems↗
PubMed2001

Bioadhesive starch microspheres and absorption enhancing agents act synergistically to enhance the nasal absorption of polypeptides.

This paper investigates the effect of starch microspheres on the absorption enhancing efficiency of various enhancer systems in formulations with insulin after application in the nasal cavity of sheep. The enhancers studied were lysophosphatidylcholine, glycodeoxycholate and sodium taurodihydroxyfusidate, a bile salt derivative. The enhancers were selected on the basis of their perceived or proven mechanism of action and worked predominantly by interacting with the lipid membrane. The bioadhesive starch microspheres were shown to increase synergistically the effect of the absorption enhancers on the transport of the insulin across the nasal membrane. Dependent on the potency of the enhancer system the increment in absorption enhancement was shown to be from 1.4 times to 5 times that obtained for the absorption enhancer in solution.

Absorption↗
PubMed2001

Clearance characteristics of chitosan based formulations in the sheep nasal cavity.

This paper describes the clearance characteristics of two bioadhesive nasal delivery systems in the form of chitosan microspheres and chitosan solution, from the nasal cavity of conscious sheep. The pattern of deposition and clearance of the nasal dosage forms were evaluated using a radioactive tracer and the non-invasive technique of gamma scintigraphy. The clearance of chitosan microsphere and solution formulations was compared with that of a control solution. The data show that the control was cleared rapidly from the sheep nasal cavity with a half-time of clearance (time taken for 50% clearance; t(50%)) of about 15 min. The bioadhesive chitosan delivery systems were cleared at a slower rate, with half-times of clearance of 43 min and 115 min, for solution and microsphere formulations respectively. From the results reported in this study it can be concluded that the chitosan delivery systems investigated had significantly reduced rates of clearance from the sheep nasal cavity, as compared to the control. Consequently, chitosan delivery systems have the ability to increase the residence time of drug formulations in the nasal cavity thereby providing the potential for improved systemic medication. The nasal clearance rates recorded in the sheep model mimic very closely the clearance rates found in a previous study using human subjects. It can also be concluded that the sheep can be considered a suitable model for in vivo nasal clearance studies of novel bioadhesive drug delivery systems.

Adhesives↗
PubMed2001

Determination of protection from serum nuclease activity by DNA-polyelectrolyte complexes using an electrophoretic method.

Polyelectrolyte complexes between cationic polymers and DNA have emerged as potential nonviral vectors for DNA delivery. For successful in vivo delivery, methods for analyzing their ability to prevent digestion of the DNA payload by serum nucleases are essential. We report here a simple assay to determine degradation of DNA in these complexes using standard electrophoretic techniques. The assay is based on a high pH buffer which can dissociate the complexes under standard electrophoretic conditions. This assay can be used qualitatively to determine the time taken for degradation to occur. Alternatively, with a standard gel analysis program it can be used quantitatively to investigate rates of DNA degradation from complexes in the presence of serum nucleases. We have shown that it can distinguish between different formulations with the same polymer, and also to distinguish between the time taken to degradation and the rates of degradation of DNA in complexes formed with two structurally related, linear polyamidoamine polymers. The assay could also distinguish between the time to degradation using poly-l-lysine complexes, although these were less well dissociated by the electrophoresis buffer, and could not be analyzed quantitatively. This assay will be of value in investigating and developing polyelectrolyte formulations for parenteral administration.

Buffers↗