Search PubMed⌕ Search

Biomedical subjects

S Rengo

Publications and source records attributed to S Rengo.

At least 19 recordsLinked to original sources
PubMed2004

Inhibition of phosphatidylinositol 3-kinase amplifies TEGDMA-induced apoptosis in primary human pulp cells.

Cytotoxicity of triethylene glycol dimethacrylate (TEGDMA), a co-monomer of dental resinous restorative materials, is firmly established in vitro, but the molecular mechanisms are unknown. Here we examined apoptosis and necrosis induced by TEGDMA in human primary pulp cells. The levels of apoptotic and necrotic cell populations differentially increased after exposure to increasing concentrations of TEGDMA. A two-fold increase in the percentage of apoptotic cells was induced by 1 mmol/L TEGDMA. However, a population shift among cells in apoptosis and necrosis was detected when cell cultures were exposed to 2 mmol/L TEGDMA. Inhibition of the MAP Kinase/ERK pathway had no influence on cell survival, but inhibition of phosphatidylinositol 3 kinase (PI3-Kinase; Akt/protein kinase B) by LY294002 amplified TEGDMA-induced apoptosis. Moreover, Akt phosphorylation was inhibited in the presence of TEGDMA. These results suggest that depression of PI3K signaling may be a primary target in TEGDMA-induced apoptosis.

Apoptosis↗
PubMed2004

NF-kappaB protection against apoptosis induced by HEMA.

The cytotoxicity of dental monomers has been widely investigated, but the underlying mechanisms have not been elucidated. We studied the molecular mechanisms involved in cell death induced by HEMA. In human primary fibroblasts, HEMA induced a dose-dependent apoptosis that was confirmed by the activation of caspases-8, -9, and -3. We found an increase of reactive oxygen species (ROS) and NF-kappaB activation after HEMA exposure. Blocking of ROS production by anti-oxidants had no direct influence on apoptosis caused by HEMA, but inhibition of NF-kappaB increased the fraction of apoptotic cells. Accordingly, mouse embryonic fibroblasts (MEF) from p65-/- mice were more susceptible to HEMA-induced apoptosis than were wild-type controls. Our results indicate that exposure to HEMA triggers apoptosis and that this mechanism is not directly dependent upon redox signaling. Nevertheless, ROS induction by HEMA activates NF-kappaB, which exerts a protective role in counteracting apoptosis.

Analysis of Variance↗
PubMed2002

Evaluation of leakage of bacteria and endotoxins in teeth treated endodontically by two different techniques.

Root canal recontamination occurs after contact between oral-bacterial flora and the coronal extremity of the root canal. The aim of this study was to evaluate the time required for endotoxins and bacteria to penetrate through root-canal obturations performed with vertical and lateral gutta-percha condensation techniques. Specimens prepared by the two alternative methods were exposed to contaminated saliva, and leakage into the root was evaluated over time. None of the obturated roots was infiltrated by endotoxins after 31 days. On the contrary, between day 13 and day 37 bacteria had infiltrated all specimens.

Coloring Agents↗
PubMed2001

Mechanical strength of tooth fragment reattachment.

The aim of this study was static and fatigue test investigation of the strength of a tooth fragment reattached with adhesives to the tooth body. Central bovine incisor teeth were used, and standardized fragments were obtained by cutting the incisal edge of the selected teeth. All the fragments were reattached using a multistep dentine adhesive system, and the specimens were randomly divided into two groups (A and B). Group B specimens underwent a further dental treatment: a circumferential double chamfer prepared around the external cut interface was filled with light cured composite restorative resin. Static and fatigue bending tests were performed and linear elastic equations were used to analyze and compare the strength of the treated teeth. The results indicated that the static and fatigue bending properties were improved by using reinforcement with composite restorative resin.

Acrylic Resins↗
PubMed2001

3D-finite element analyses of cusp movements in a human upper premolar, restored with adhesive resin-based composites.

The combination of diverse materials and complex geometry makes stress distribution analysis in teeth very complicated. Simulation in a computerized model might enable a study of the simultaneous interaction of the many variables. A 3D solid model of a human maxillary premolar was prepared and exported into a 3D-finite element model (FEM). Additionally, a generic class II MOD cavity preparation and restoration was simulated in the FEM model by a proper choice of the mesh volumes. A validation procedure of the FEM model was executed based on a comparison of theoretical calculations and experimental data. Different rigidities were assigned to the adhesive system and restorative materials. Two different stress conditions were simulated: (a) stresses arising from the polymerization shrinkage and (b) stresses resulting from shrinkage stress in combination with vertical occlusal loading. Three different cases were analyzed: a sound tooth, a tooth with a class II MOD cavity, adhesively restored with a high (25 GPa) and one with a low (12.5GPa) elastic modulus composite. The cusp movements induced by polymerization stress and (over)-functional occlusal loading were evaluated. While cusp displacement was higher for the more rigid composites due to the pre-stressing from polymerization shrinkage, cusp movements turned out to be lower for the more flexible composites in case the restored tooth which was stressed by the occlusal loading. This preliminary study by 3D FEA on adhesively restored teeth with a class II MOD cavity indicated that Young's modulus values of the restorative materials play an essential role in the success of the restoration. Premature failure due to stresses arising from polymerization shrinkage and occlusal loading can be prevented by proper selection and combination of materials.

Bicuspid↗
PubMed2000

Carbon fiber post adhesion to resin luting cement in the restoration of endodontically treated teeth.

Carbon fiber posts (CFP) are widely used in the restoration of endodontically treated teeth to enhance the mechanical behavior in spite of metallic posts and to prevent vertical fractures of the tooth under chewing loads. The post is cemented inside the canal lumen using polymer resins with Young's modulus lower than dentine. In this conditions the stress concentration is located at the post-cement interface and in the cement bulk itself, preserving radicular dentine from dangerous stress accumulation. The mechanical resistance of CFP posts cemented in human dentine was evaluated by the means of mechanical pull-out tests assisted by the finite element analysis. The average bond strength and the critical stress values of the CHP-cement interface were 25 MPa and 50 MPa respectively.

Journal Article↗
PubMed2000

[Mouth opening in patients with systemic sclerosis: base analysis and during follow-up].

BACKGROUND: A large number of orofacial abnormalities have been described in patients with Systemic Sclerosis (SSc) but no data are reported on the correlation with different subgroups of patients on the efficacy of different therapies. METHODS: In the present study mouth opening was retrospectively evaluated in 40 patients with SSc in whom measurement of interlabial distance was taken at the first clinical control and during follow-up. The data confirmed that the mouth opening is significantly decreased in patients with SSc independently from sclerosis subgroup, age or disease duration. RESULTS: Follow-up (8 +/- 8.3 years) showed a different behaviour of the parameter: in 12 patients (group I) no variation in mouth opening was detected, in 18 patients (group II) a decrease and in 10 patients (group III) an increase was observed. CONCLUSIONS: The only difference between the three groups was the treatment received: 80% of the patients of group III (p < 0.01) have been treated with cyclophosphamide (CF). Our data further support the efficacy of treatment with CF in patients with SSc.

Adult↗
PubMed1999

Debonding of adhesively restored deep Class II MOD restorations after functional loading.

PURPOSE: To assess debonding due to functional loading at the cervical dentin margins of deep Class II MOD restorations prepared with a variety of adhesive restoratives in endodontically-treated teeth. MATERIALS AND METHODS: MOD preparations and endodontic treatment were carried out on extracted sound maxillary premolars. The cavities were restored with seven material combinations: Three different resin-based composites (RBC) (Z100, Herculite XRV or Clearfil RP with their respective bonding systems); two bonded amalgam combinations (Valiant with Superbond D or with Panavia 21) and two sandwich combinations [the RBC Tetric with the polyacid-modified RBC (compomer) Compoglass or Z100 with the resin-modified glass ionomer Fuji II LC]. For each group, half of the samples were exposed to mechanical functional loading and the other half served as control. Imperfect bond formation and debonding due to loading was determined by dye penetration. In addition, the dye penetration scores were correlated with the cusp fracture strengths of similarly prepared restorations of a previous study. RESULTS: After functional loading, the RBC in combination with hybridizing dentin bonding agents showed better preservation of marginal integrity than the sandwich restorations, which in turn performed better than the amalgam restorations (P < 0.05). Debonding correlated with reduction in fracture resistance. Under the conditions of this study, debonding of adhesive MOD restorations by functional loading can best be prevented by using RBC in combination with hybridizing dentin-bonding systems.

Analysis of Variance↗
PubMed1998

Inhibition by glass-ionomer cements of protein synthesis by human gingival fibroblasts in continuous culture.

The effects of several glass-ionomer cements (Baseline and Chem Fil of De Trey; Ketac Fil and Ketac Bond of ESPE; Vitrebond and Vitremer of 3 M) on the protein synthesis of cultured gingival fibroblasts were studied. The presence of cements in the culture medium inhibited protein synthesis, although the relative effectiveness varied significantly. The cements tested have been ranked in three groups, group A (Chem Fil and Ketac Fil), group B (Ketac Bond and Baseline) and group C (Vitrebond and Vitremer), showing 50, 75 and 100% reduction in protein synthesis, respectively. Incubation of cells with medium previously conditioned by Baseline and Ketac Fil caused only transient inhibition of protein synthesis followed by almost complete recovery. This recovery was not observed when the medium was conditioned with Vitrebond. A characterization of the factors determining the inhibitory effect of one cement in each group was attempted. The cements, irrespective of the type, produced small but reproducible decreases in the pH of the medium but released fluoride ions to a different extent. Both changes in the pH of the medium and in the fluoride concentration inhibited protein synthesis by cultured gingival fibroblasts. The different action of cements can be explained, at least in part, by a differing release of fluoride ions.

Aluminum Silicates↗
PubMed1997

Fracture resistance of endodontically-treated premolars adhesively restored.

PURPOSE: To investigate the cusp fracture resistance of endodontically treated teeth, adhesively restored with various materials. MATERIALS AND METHODS: MOD preparations and endodontic treatment was carried out on extracted sound maxillary premolars. The cavities were restored with the amalgam Valiant in combination with Superbond or Panavia bonding, the resin composites Z100, Herculite XRV or Clearfil RP with their respective bonding systems, Z100 in combination with the glass ionomers Ketac Fil, Fuji II and Vitremer, and Tetric in combination with Compoglass. Fracture resistance was measured by axial loading in an Instron testing machine. RESULTS: One of the restorative methods, resin composites in combination with dentin bonding systems in beveled MOD preparations rendered the tooth a cusp fracture resistance which did not differ significantly from that of sound natural teeth. Two other restorative methods, bonded amalgam and a sandwich of glass ionomer cement/resin composite in beveled preparations were significantly weaker in resisting cusp fracture than sound natural teeth, but still significantly stronger than the unrestored tooth with a MOD preparation. It was statistically apparent that several adhesive restorative systems could satisfactorily be used to restore teeth after endodontic therapy.

Analysis of Variance↗
PubMed1994

Photopolymerization of dental composite matrices.

The kinetic behaviour of dental composite is traditionally studied, considering only the isothermal behaviour, whereas a fast and highly non-isothermal bulk polymerization is expected as a consequence of the significant heat developed due to the exothermic nature of the polymerization reaction. In this paper the photopolymerization kinetics of a commercial dental composite activated by visible light are analysed by differential scanning calorimetry. This technique is applied to determine the degree of reaction and the glass transition temperature of thin layers of the composite matrix, at different isothermal cure temperatures. A phenomenological kinetic model is then integrated with an energy balance in order to analyse the cure behaviour of thicker composite layers. The full model results indicate that non-isothermal cure conditions may be achieved, obtaining higher values for the glass transition temperature and the degree of reaction.

Calorimetry, Differential Scanning↗
PubMed1990

[Ultrasound in endodontics: S.E.M. verification].

After giving a brief illustration of the complex morphology of the root canal system, the Authors discuss the use of ultrasound in Endodontics. Following a critical evaluation of the literature and of the mechanisms of ultrasonic instruments, they illustrate their experience through a wide selection of S.E.M. photographs of teeth treated in vitro with sodium hypochlorite at various concentrations and for different lengths of time. They demonstrate the synergistic action between ultrasound and irrigation solutions, and conclude that the best results are with 2.5% hypochlorite for 1 minute.

Dental Pulp Cavity↗
PubMed1989

[Cardiotoxicity of local anesthetics: dynamic electrocardiogram study].

Twenty-two cardiopathic patients (mean age 54.4 +/- 9.9 years) underwent dynamic electrocardiography during tooth extraction under local anesthesia (mepivacaine hydrochloride 2% plus adrenalin 1:200.000). Heart rate (p less than 0.001), systolic and diastolic blood pressure (p less than 0.001) significantly increased during tooth extraction returning to values near to basal level in the recovery period. No patients showed significant changes in ST segment. One patient with chronic atrial fibrillation presented an increase in ventricular rate (180 beats/min) and appearance of premature ventricular beats, spontaneously regressed. In conclusion, in cardiopathic patients dental operations by local anesthesia with vessel constriction it is possible, provided estimated clinical conditions of patients.

Adult↗