Spiral CT creates 3-D neuro, body angiograms.
Explore the source record for details and available documents.
Angiography↗
Biomedical subjects
S Napel
Publications and source records attributed to S Napel.
Fast Fourier projection for MR angiography.
We have developed a technique called fast Fourier projection which rapidly produces projections through images and is particularly useful for generating MR angiograms. Based on the projection-slice theorem of Fourier transform theory, this method extracts planes from three-dimensional spatial frequency space and computes projections at arbitrary viewing angles by two-dimensional inverse Fourier transformation. Typical computation times are on the order of 1 s per projection. This performance makes possible interactive selection of optimal projection directions for visualizing the desired vasculature in single or stereo-pair angiographic images and drastically reduces the time required to generate sequences of projections for display in movie loops compared to the conventional ray-casting approach. The method is easily implemented on off-line workstations or directly on MRI computer systems.
Angiography↗
Magnetic resonance techniques for blood-flow measurement and vascular imaging.
The authors review the history and physical principles behind vascular magnetic resonance imaging (MRI) techniques, developed to measure blood flow noninvasively and to display images of the vasculature. All these techniques have been used to create magnetic resonance angiograms, in which the vasculature is shown in a projection format similar to x-ray angiography. Signal loss limits the effectiveness of "white-blood" magnetic resonance angiography techniques, since slow flow and complex flow often cause a drop in signal and consequently a loss of accuracy in depicting vessel anatomy. "Black-blood" magnetic resonance angiography is described as a method that avoids these problems of signal loss. Selective black-blood magnetic resonance angiography is introduced as a technique for improving the visualization of the vasculature when other signal-void structures are present in the volume of interest.
Blood↗
Functional imaging of the brain using computed tomography.
Data from rapid-sequence CT scans of the same cross section, obtained following bolus injection of contrast material, were analyzed by functional imaging. The information contained in a large number of images can be compressed into one or two gray-scale images which can be evaluated both qualitatively and quantitatively. The computational techniques are described and applied to the generation of images depicting bolus transit time, arrival time, peak time, and effective width.
Brain↗
Fetal blood velocity waveforms.
In this paper a method is described for obtaining and characterizing fetal blood velocity waveforms. The signals were recorded with a range-gated Doppler instrument and characterized after spectral analysis. Preliminary observations indicate differences in the waveforms obtained during normal pregnancies compared with some complicated pregnancies.
Blood Flow Velocity↗
Visualizing three-dimensional flow with simulated streamlines and three-dimensional phase-contrast MR imaging.
Three-dimensional (3D) velocity maps acquired with 3D phase-contrast magnetic resonance (MR) imaging contain information regarding complex motions that occur during imaging. A technique called simulated streamlines, which facilitates the display and comprehension of these velocity data, is presented. Single or multiple seed points may be identified within blood vessels of interest and tracked through the velocity field. The resulting trajectories are combined with a 3D MR angiogram and displayed with 3D volume visualization software. Mathematical analysis highlights potential applications and pitfalls of the technique, which was implemented both in phantoms and in vivo with excellent results. For example, single streamlines reveal helical flow patterns in aneurysms, and multiple streamlines seeded in the common carotid artery reveal branch filling-time relationships and slow filling of the carotid bulb. The technique is helpful in understanding these complex flow patterns.
Blood Flow Velocity↗
Noise reduction in three-dimensional phase-contrast MR velocity measurements.
The authors have developed a method to reduce noise in three-dimensional (3D) phase-contrast magnetic resonance (MR) velocity measurements by exploiting the property that blood is incompressible and, therefore, the velocity field describing its flow must be divergence-free. The divergence-free condition is incorporated by a projection operation in Hilbert space. The velocity field obtained with 3D phase-contrast MR imaging is projected onto the space of divergence-free velocity fields. The reduction of noise is achieved because the projection operation eliminates the noise component that is not divergence-free. Signal-to-noise ratio (S/N) gains on the order of 15%-25% were observed. The immediate effect of this noise reduction manifests itself in higher-quality phase-contrast MR angiograms. Alternatively, the S/N gain can be traded for a reduction in imaging time and/or improved spatial resolution.
Algorithms↗
Interactive display of volumetric data by Fast Fourier Projection.
This article describes a new algorithm for reprojection of volumetric data, called Fast Fourier Projection (FFP), which is one to two orders of magnitude faster than conventional methods such as ray casting. The theoretical basis of the new method is developed in a unified mathematical framework encompassing slice imaging and conventional volumetric reprojection methods. Software implementation is discussed in detail. The article closes with an account of experience with a prototype FFP implementation, and applications of the technique in medical visualization.
Algorithms↗
Measurement of cardiac output by computed transmission tomography.
The capability of computed tomography (CT) scanning to measure cardiac output was explored using ten anesthetized dogs, and the results were compared with those obtained by thermodilution. Dynamic CT scans were performed at the level of the aortic root while small peripheral intravenous boluses of contrast medium were injected. Time/density curves were generated using a gamma variate fitting program. These were used to estimate cardiac output by applying indicator dilution principles. CT results correlated favorably (r = 0.86) with those of thermodilution. This feasibility study indicates the utility of CT for obtaining physiologic measurements of cardiac function and should encourage further studies to develop the potential of CT for cardiovascular diagnostic purposes.
Animals↗
Comparison and evaluation of retrospective intermodality brain image registration techniques.
PURPOSE: The primary objective of this study is to perform a blinded evaluation of a group of retrospective image registration techniques using as a gold standard a prospective, marker-based registration method. To ensure blindedness, all retrospective registrations were performed by participants who had no knowledge of the gold standard results until after their results had been submitted. A secondary goal of the project is to evaluate the importance of correcting geometrical distortion in MR images by comparing the retrospective registration error in the rectified images, i.e., those that have had the distortion correction applied, with that of the same images before rectification. METHOD: Image volumes of three modalities (CT, MR, and PET) were obtained from patients undergoing neurosurgery at Vanderbilt University Medical Center on whom bone-implanted fiducial markers were mounted. These volumes had all traces of the markers removed and were provided via the Internet to project collaborators outside Vanderbilt, who then performed retrospective registrations on the volumes, calculating transformations from CT to MR and/ or from PET to MR. These investigators communicated their transformations again via the Internet to Vanderbilt, where the accuracy of each registration was evaluated. In this evaluation, the accuracy is measured at multiple volumes of interest (VOIs), i.e., areas in the brain that would commonly be areas of neurological interest. A VOI is defined in the MR image and its centroid c is determined. Then, the prospective registration is used to obtain the corresponding point c' in CT or PET. To this point, the retrospective registration is then applied, producing c" in MR. Statistics are gathered on the target registration error (TRE), which is the distance between the original point c and its corresponding point c". RESULTS: This article presents statistics on the TRE calculated for each registration technique in this study and provides a brief description of each technique and an estimate of both preparation and execution time needed to perform the registration. CONCLUSION: Our results indicate that retrospective techniques have the potential to produce satisfactory results much of the time, but that visual inspection is necessary to guard against large errors.
Brain↗
Detection of colonic polyps in a phantom model: implications for virtual colonoscopy data acquisition.
PURPOSE: Virtual colonoscopy is a new method of colon examination in which computer-aided 3D visualization of spiral CT simulates fiberoptic colonoscopy. We used a colon phantom containing various-sized spheres to determine the influence of CT acquisition parameters on lesion detectability and sizing. METHOD: Spherical plastic beads with diameters of 2.5, 4, 6, 8 and 10 mm were randomly attached to the inner wall of segments of plastic tubing. Groups of three sealed tubes were scanned at 3/1, 3/2, 5/1 collimation (mm)/pitch settings in orientations perpendicular and parallel to the scanner gantry. For each acquisition, image sets were reconstructed at intervals from 0.5 to 5.0 mm. Two blinded reviewers assessed transverse cross-sections of the phantoms for bead detection, using source CT images for images for acquisitions obtained with the tubes oriented perpendicular to the gantry and using orthogonal reformatted images for scans oriented parallel to the gantry. RESULTS: Detection of beads of > or = 4 mm was 100% for both tube orientations and for all collimator/pitch settings and reconstruction intervals. For the 2.5 mm beads, detection decreased to 78-94% for 5 mm collimation/pitch 2 scans when the phantom sections were oriented parallel to the gantry (p = 0.01). Apparent elongation of beads in the slice direction occurred as the collimation and pitch increased. The majority of the elongation (approximately 75%) was attributable to changing the collimator from 3 to 5 mm, with the remainder of the elongation due to doubling the pitch from 1 to 2. CONCLUSION: CT scanning at 5 mm collimation and up to pitch 2 is adequate for detection of high contrast lesions as small as 4 mm in this model. However, lesion size and geometry are less accurately depicted than at narrower collimation and lower pitch settings.
Colon↗
Visualization modes for CT colonography using cylindrical and planar map projections.
PURPOSE: The purpose of this study was to demonstrate the limitations to the effectiveness of CT colonography, colloquially called virtual colonoscopy (VC), for detecting polyps in the colon and to describe a new technique, map projection CT colonography using Mercator projection and stereographic projection, that overcomes these limitations. METHOD: In one experiment, data sets from nine patients undergoing CT colonography were analyzed to determine the percentage of the mucosal surface visible in various visualization modes as a function of field of view (FOV). In another experiment, 40 digitally synthesized polyps of various sizes (10, 7, 5, and 3.5 mm) were randomly inserted into four copies of one patient data set. Both Mercator and stereographic projections were used to visualize the surface of the colon of each data set. The sensitivity and positive predictive value (PPV) were calculated and compared with the results of an earlier study of visualization modes using the same CT colonography data. RESULTS: The percentage of mucosal surface visualized by VC increases with greater FOV but only approaches that of map projection VC (98.8%) at a distorting, very high FOV. For both readers and polyp sizes of > or =7 mm, sensitivity for Mercator projection (87.5%) and stereographic projection (82.5%) was significantly greater (p < 0.05) than for viewing axial slices (62.5%), and Mercator projection was significantly more sensitive than VC (67.5%). Mercator and stereographic projection had PPVs of 75.4 and 78.9%, respectively. CONCLUSION: The sensitivity of conventional CT colonography is limited by the percentage of the mucosal surface seen. Map projection CT colonography overcomes this problem and provides a more sensitive method with a high PPV for detecting polyps than other methods currently being investigated.
Adult↗
STS-MIP: a new reconstruction technique for CT of the chest.
The authors present sliding thin-slab maximum intensity projection (STS-MIP) as a technique for improved visualization of blood vessels and airways from rapidly acquired thin-section CT data. The STS-MIP reconstructions can be computed rapidly and without operator intervention directly from the transaxial sections. The resulting images retain the high contrast resolution of thin-section (1-3 mm) CT while providing vascular or airway visibility within a sequence of overlapping thin-slabs (3-10 mm). Examples are presented of pulmonary vessels and airways derived from spiral CT and of pulmonary vessels and coronary arteries derived from electron-beam CT.
Humans↗