Biomedical subjects

S N Liss

Publications and source records attributed to S N Liss.

12 recordsLinked to original sources

PubMed2006

Effect of solids retention time on structure and characteristics of sludge flocs in sequencing batch reactors.

The effect of solids retention time (SRT) (4-20 d) on sludge floc structure, size distribution and morphology in laboratory-scale sequencing batch reactors receiving a glucose-based synthetic wastewater was studied using image analysis in a long-term experiment over one year. Floc size distribution (>10 microm) could be characterized by a log-normal model for no bulking situations, but a bi-modal distribution of floc size was observed for modest bulking situations. In each operating cycle of the SBRs, the variation in food /microorganisms ratio (0.03-1.0) had no significant influence on floc size distribution and morphology. The results from a long-term study over one year showed that no clear relationship existed between SRT and median floc size based on frequency. However, sludge flocs at the lower SRTs (4-9 d) were much more irregular and more variable in size with time than those at higher SRTs (16 and 20 d). The level of effluent-suspended solids at lower SRTs was higher than that at higher SRTs.

Bioreactors↗

PubMed2006

Effect of phosphorus limitation on microbial floc structure and gene expression in activated sludge.

The effect of limiting phosphorus (P) in activated sludge was investigated in laboratory-scale sequencing batch reactors (SBRs). Correlative microscopy revealed that P-limitation (COD:N:P = 100:5:0.05) leads to morphological changes in floc structure and the composition of extracellular polymeric substances (EPS). This was found to be accompanied by expression of quorum-sensing in an acyl homoserine lactone bioassay. Differential gene expression in relation to P-limitation was examined in a global profile using the Affymetrix Escherichia coli antisense genomic microarray. Three separate experiments were conducted where the impact of P-limitation was examined under batch conditions and in SBRs at stable operating conditions and within 3-7 days following a down-shift in P. Significant changes in open reading frames (ORF) and intergenic regions based on the E. coli microarray were observed. Several genes associated with cell structure, including slt, wbbH, fimH, amB, rfaJ and slp were found to be expressed. Quorum regulated genes were also found to be expressed including psiF which is known to be induced by P-starvation (92% confidence level; 1.45 log ratio).

Escherichia coli↗

PubMed2002

Interparticle interactions affecting the stability of sludge flocs.

Interparticle interactions affecting the stability of sludge flocs taken from laboratory-scale sequencing batch reactors at different solids retention times (SRTs) were investigated in batch experiments by varying the pH, ionic strength, cation valence, and urea and ethylenediaminetetraacetate concentrations of suspending solutions. The ultrastructure of sludge floc surfaces was observed by transmission electron microscopy. Changes in dissociation constants of sludge flocs under different conditions indicated that ionic interactions and hydrogen bonds held flocs together and compensated for the negative influence of electrostatic interactions on the stability of sludge flocs. Ionic interactions and hydrogen bonds were two dominant forces that maintained the stability of sludge flocs at lower SRTs; other mechanisms, such as physical enmeshment and van der Waals and/or hydrophobic interactions, were more important in controling the stability of sludge flocs at higher SRTs. Sludge flocs at higher SRTs (16 and 20 days) were physically more stable than those at lower SRTs (4 and 9 days). A conceptual model of floc structure, based on interparticle interactions, for describing the stability of sludge flocs is proposed. The floc matrix is proposed to consist of two physically distinct regions that are defined by the arrangement of extracellular polymeric substances (EPS). These are likely to be differentially affected by the agents applied to manipulate interparticle forces. Thus, the heterogeneity in the packing of and the type of EPS reflects the stability of the floc.

Electrochemistry↗

PubMed2002

Effect of solids retention time on floc structure.

Correlative microscopy was applied to study the influence of solids retention time on activated sludge floc structure. Conventional optical microscopy revealed flocs at lower SRTs (4 and 9 days) to be irregular in shape while flocs at higher SRTs (16 and 20 days) had a more spherical and compact structure. Flocs were examined by environmental scanning electron microscopy (ESEM) and by transmission electron microscopy (TEM) coupled with energy-dispersive spectroscopy (EDS). Distinctive differences in floc structure and the arrangement of EPS were revealed. Flocs from higher SRTs were less hydrated and were found to possess a dense EPS layer that covers much of the surface. Extracellular osmiophilic granules present in these flocs indicate that the cells at the higher SRT may produce more lipid-like material. This EPS layer appears to decrease the floc surface roughness and protects the interior cells from disruption by changes in the external environment. Sludge flocs at higher SRTs were found to be physically more stable than those at lower SRTs.

Bioreactors↗

PubMed2001

Surface properties of sludge and their role in bioflocculation and settleability.

The influence of sludge retention time (SRT) on the extracellular polymeric substances (EPS) and physicochemical properties (hydrophobicity and surface charge) of sludge was studied using laboratory-scale sequencing batch reactors (SBRs) fed a synthetic wastewater containing glucose and inorganic salts. Sludge surfaces were more hydrophobic (larger contact angle) and less negatively charged at higher SRTs (16 and 20 d) than at lower SRTs (4 and 9 d). The ratio of proteins to carbohydrates within the EPS of the sludges increased as the SRT increased from 4 to 12 d corresponding to the changes in the physicochemical properties of the sludge. The protein:carbohydrate ratio remained constant at SRTs of 16 and 20 d. A transition in sludge properties appeared to occur between the upper range of low- (9 d) and lower range of high-SRTs. The total EPS content, however, was independent of the SRT. A higher sludge volume index (SVI), an indication of poorer settleability or compression, was associated with a larger amount of total EPS but no significant correlation between SVI and the surface properties of sludge was observed. A more hydrophobic and less negatively charged surface corresponded to lower levels of ESS. These results indicate that it is the surface properties, hydrophobicity, surface charge and composition of EPS, of sludge, rather than the quantity of EPS, that govern bioflocculation. In contrast, the EPS content is more important in controlling the settleability of sludge.

Carbohydrates↗

PubMed1997

Microbiology and biodegradation of resin acids in pulp mill effluents: a minireview.

Resin acids, a group of diterpenoid carboxylic acids present mainly in softwood species, are present in many pulp mill effluents and toxic to fish in recipient waters. They are considered to be readily biodegradable. However, their removal across biological treatment systems has been shown to vary. Recent studies indicate that natural resin acids and transformation products may accumulate in sediments and pose acute and chronic toxicity to fish. Several resin acid biotransformation compounds have also been shown to bioaccumulate and to be more resistant to biodegradation than the original material. Until recently, the microbiology of resin-acid degradation has received only scant attention. Although wood-inhabiting fungi have been shown to decrease the level of resin present in wood, there is no conclusive evidence that fungi can completely degrade these compounds. In contrast, a number of bacterial isolates have recently been described which are able to utilize dehydroabietic or isopimaric acids as their sole carbon source. There appears to be an unusually high degree of substrate specificity with respect of the utilization of abietane congeners and the presence of substituents. Pimaranes do not appear to be attacked to the same extent as the abietanes. This paper reviews the occurrence, chemistry, toxicity, and biodegradation of resin acids in relation to the biological treatment of pulp and paper mill effluents.

Biodegradation, Environmental↗

PubMed1996

Floc stabilization for multiple microscopic techniques.

A nondestructive stabilization technique for the characterization of microbial flocs which permits the application of correlative microscopic techniques is described. Flocs embedded in agarose are retained in a porous, resilient medium which allows for the transport, staining, washing, and subsampling of the flocculated material directly within a plankton chamber with minimal or no destructive forces. A single agarose disc can be subdivided into numerous sections for analysis by several microscope types and associated techniques.

Journal Article↗

PubMed1993

Characterization of bacteria isolated from a bleached kraft pulp mill wastewater treatment system.

Water samples from the wastewater treatment system of a bleach kraft mill and from the river that supplies the mill were plated on six different media and culturable isolates were screened for substrate utilization patterns, taxonomic characters, plasmid content, and resistance to ampicillin, streptomycin, kanamycin, tetracycline, naldixic acid, mercury, nickel, copper, cobalt, cadmium, and zinc. A cluster analysis of the substrate utilization profiles and taxonomic characters revealed that Pseudomonas, Acinetobacter, and Acidovorax spp. were common among the culturable isolates from the river, while Ancylobacter aquaticus, Klebsiella spp., and an unknown group of pleomorphic Gram-negative methylotrophs were common among the culturable isolates from the mill treatment system. Of isolates from the settling pond and aerated lagoon, 78 and 64% carried plasmids, while only 56% of isolates from the river carried plasmids. Plasmids were significantly associated with resistance to cadmium but not with any other resistance characters. Large numbers of plasmid-carrying A. aquaticus strains and pleomorphic methylotrophs accounted for high plasmid incidence levels in the mill treatment system, and the ability to dechlorinate simple aliphatic substrates was found in these two groups as well as in one Pseudomonas strain.

Acinetobacter↗

PubMed1992

Antimicrobial activity of 2-aminophenoxazin-3-one under anaerobic conditions.

Potential toxicity of 2-aminophenoxazin-3-one to 20 bacterial species and two fungi and its inactivation under anaerobic conditions were investigated. Minimum inhibitory concentration for cellulolytic bacteria was in the range of 50-100 micrograms.mL-1, but at 100 micrograms.mL-1 of 2-aminophenoxazin-3-one, there was no effect on the growth of any of the noncellulolytic bacteria. Four noncellulolytic bacterial strains showed no inhibition of growth, even at 200 micrograms.mL-1 of this compound. Under anaerobic conditions and in the presence of cysteine, the long wavelength absorption band of this compound slowly shifted from about 434 to 320 nm, and its inhibitory effect on RNA synthesis was relieved after one-half of a generation time in cultures of cellulolytic ruminal bacteria. A similar shift of absorption band was observed in rumen fluid filtered through a 0.22-microns Millipore filter. It was concluded that protonation of 2-aminophenoxazin-3-one under anaerobic conditions present in the rumen would considerably reduce its potential toxicity to cellulolytic bacteria.

Animals↗

PubMed1985

Antibiotic activity of an isocyanide metabolite of Trichoderma hamatum against rumen bacteria.

A metabolite of Trichoderma hamatum, 3-(3-isocyanocyclopent-2-enylidene)propionic acid, was tested for its effects on growth of and carbohydrate metabolism in 11 strains of functionally important rumen bacteria. To standardize the biological activity of this unstable metabolite, a rapid, aerobic disc diffusion assay was developed using Escherichia coli ATCC 11775. In an anaerobic broth dilution assay using a medium lacking rumen fluid and containing a soluble carbohydrate, the minimum inhibitory concentration of the metabolite which completely inhibited growth of the rumen bacteria for 18 h at 39 degrees C was generally less than 10 micrograms X mL-1; however, the minimum inhibitory concentrations for Megasphaera elsdenii B159 and Streptococcus bovis Pe(1)8 were 10-25 and 25-64 micrograms X mL-1, respectively. In general, the Gram-negative strains were more sensitive than the Gram positive. The minimum inhibitory concentration for Bacteroides ruminicola 23 grown with glucose was 1 micrograms X mL-1; for B. ruminicola GA33 (glucose), B. succinogenes S85 (cellobiose), and Succinivibrio dextrinosolvens 24 (maltose), it was 2 microgram X mL-1. When added to a cellulose-containing rumen fluid medium, 1-4 micrograms X mL-1 of the metabolite delayed cellulose hydrolysis by B. succinogenes S85, Ruminococcus albus 7, and R. flavefaciens FD1 for up to 4 days, and 6-7 micrograms X mL-1 prevented hydrolysis for at least 1 month. In the presence of the metabolite, the proportion of acetate produced from soluble carbohydrate by the majority of strains increased, but with some strains net production of acetate decreased relative to production of other acidic fermentation products.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗

PubMedDate not supplied

Toluene removal in an automated cyclical bioreactor.

A control scheme was developed for the automation of toluene removal in a cyclical bioreactor. Toluene was added to the self-cycling fermentor by diffusion across a silicone membrane. Transient dissolved oxygen, carbon dioxide evolution, and oxidation-reduction potential (ORP) were screened as potential control variables. Through experimentation, ORP was deemed most effective. Control algorithms based on real-time estimates of the first and second derivatives of the ORP signal were tested. Although both approaches resulted in stable operation of the reactor, average toluene removal efficiencies of 95% were realized when control was based on the second derivative. This was significantly higher than the 77% efficiencies obtained when the control scheme centered on the first derivative of the transient ORP signal. The system developed was self-regulating, ensuring that a high toluene removal rate, on the order of 1.1 g h(-1), was maintained from cycle to cycle.

Automation↗

PubMedDate not supplied

A review of biofouling and its control in membrane separation bioreactors.

Membrane separation technology is increasingly becoming an important innovation in biological wastewater treatment. Biofouling of the membrane is a major factor affecting the efficient and economic operation of membrane separation bioreactors (MBRs). This review summarizes the state-of-the-art progress in understanding the mechanisms and factors affecting membrane biofouling and the strategies for biofouling control. Biofouling mechanisms include the adsorption of soluble and suspended extracellular polymers on membrane surfaces and in membrane pores, the clogging of membrane pore structure by fine colloidal particles and cell debris, and the adhesion and deposition of sludge cake on membrane surfaces. Design and operating conditions of membrane modules and materials, hydrodynamic conditions in MBRs, process and environmental conditions of activated sludge systems, and the physicochemical properties of the wastewater are the dominant factors determining membrane biofouling. Current strategies to control biofouling include periodic relaxation, backwashing, chemical cleaning, and possible manipulation of hydrodynamic conditions and sludge properties. Achieving full integration of MBRs in wastewater treatment technology requires further research and development. Fundamental information on the bacteria, colloid, and membrane interaction, developed through multimethod and multiscale approaches, is particularly needed.

Bacteria↗