Search PubMed⌕ Search

Biomedical subjects

S L Brenner

Publications and source records attributed to S L Brenner.

At least 37 records · Page 2Linked to original sources
PubMed1985

The amino acid sequence of Acanthamoeba profilin.

The complete amino acid sequence of Acanthamoeba profilin was determined by aligning tryptic, chymotryptic, thermolysin, and Staphylococcus aureus V8 protease peptides together with the partial NH2-terminal sequences of the tryptophan-cleavage products. Acanthamoeba profilin contains 125 amino acid residues, is NH2-terminally blocked, and has trimethyllysine at position 103. At five positions in the sequence two amino acids were identified indicating that the amoebae express at least two slightly different profilins. Charged residues are unevenly distributed, the NH2-terminal half being very hydrophobic and the COOH-terminal half being especially rich in basic residues. Comparison of the Acanthamoeba profilin sequence with that of calf spleen profilin (Nystrom, L. E., Lindberg, U., Kendrick-Jones, J., and Jakes, R. (1979) FEBS Lett. 101, 161-165) reveals homology in the NH2-terminal region. We suggest, therefore, that this region participates in the actin-binding activity.

Amino Acid Sequence↗
PubMed1984

Preparation and polymerization of skeletal muscle ADP-actin.

Skeletal muscle ADP-G-actin was prepared from ADP-F-actin, which had been freed of residual ATP by repeated sonication, by depolymerization in 5 mM Tris-HCl, 0.2 mM ADP, 0.2 mM dithiothreitol, 0.1 mM CaCl2, 0.1 mM MgCl2, and 0.01% NaN3, pH 8.0. The ADP had been freed of traces of ATP by DEAE-chromatography, and 5 microM diadenosine pentaphosphate was added to inhibit myokinase activity. The kinetics of the spontaneous polymerization of ADP-actin in 1 mM MgCl2 + 0.1 M KCl were compatible with the simple nucleation-elongation model previously used to explain the polymerization of ATP-actin. The critical concentrations of ADP-actin were 8.0 and 2.0 microM in 1 mM MgCl2 and 1 mM MgCl2 + 0.1 M KCl, respectively. These values are 20-30-fold higher than the corresponding values in ATP. Using cross-linked actin trimers to nucleate polymerization, the association rate constants were found to be 0.8 and 0.9 microM-1 S-1 in MgCl2 and MgCl2 + KCl, respectively, which are 0.4 and 0.2 times the values for ATP-actin. The dissociation rate constants, calculated from the critical concentrations and the association rate constants, were 6.4 and 1.8 S-1, respectively, which are 10 and 5 times the corresponding values for ATP-actin.

Actins↗
PubMed1984

Rate constants for actin polymerization in ATP determined using cross-linked actin trimers as nuclei.

Chemically cross-linked actin trimer, prepared from F-actin covalently cross-linked by N-N'-p-phenylenebismaleimide, was used to nucleate the assembly of actin polymers under a variety of ionic conditions at 25 degrees C. Gel-filtered G-actin (5% labeled with N-pyrenyl iodoacetamide) was prepared in buffers containing 5 mM Tris X HCl, 0.2 mM ATP, 0.05 mM MgCl2 or 0.1 mM CaCl2, 0.2 mM dithiothreitol, and 0.01% sodium azide, pH 7.5. Polymerization was initiated by adding salt to a solution of actin monomer (2-25 microM) mixed with actin trimer (0-24 nM). Pseudo-first-order polymerization kinetics were observed in all cases following a lag phase of 30-75 s. The length of the lag phase was independent of trimer concentration, monomer concentration, or preincubation of monomer or trimer in polymerizing buffer. A simple model is presented which explains all of the observed features of the lag phase. Lower limits for the sums of the elongation rate constants at the two filament ends, calculated assuming each trimer acts as a seed, were in the range 1.4-5.2 microM-1 s-1, and lower limits for the polymer dissociation rate constants (calculated from the elongation rate constants and the critical actin concentration) were 0.4-1.9 s-1, depending on ionic conditions. The observed rate constants were independent of actin concentration or trimer concentration under a given ionic condition. These polymerization rate constants are in good agreement with the values others have obtained by measuring the growth of actin filaments by electron microscopy.

Actins↗
PubMed1984

The critical concentration of actin in the presence of ATP increases with the number concentration of filaments and approaches the critical concentration of actin.ADP.

F-actin at steady state in the presence of ATP partially depolymerized to a new steady state upon mechanical fragmentation. The increase in critical concentration with the number concentration of filaments has been quantitatively studied. The data can be explained by a model in which the preferred pathway for actin association-dissociation reactions at steady state in the presence of ATP involves binding of G-actin . ATP to filaments, ATP hydrolysis, and dissociation of G-actin . ADP which is then slowly converted to G-actin . ATP. As a consequence of the slow exchange of nucleotide on G-actin, the respective amounts of G-actin . ATP and G-actin . ADP coexisting with F-actin at steady state depend on the filament number concentration. G-actin coexisting with F-actin at zero number concentration of filaments would then consist of G-actin . ATP only, while the critical concentration obtained at infinite number of filaments would be that for G-actin . ADP. Values of 0.35 and 8 microM, respectively, were found for these two extreme critical concentrations for skeletal muscle actin at 20 degrees C, pH 7.8, 0.1 mM CaCl2, 1 mM MgCl2, and 0.2 mM ATP. The same value of 8 microM was directly measured for the critical concentration of G-actin . ADP polymerized in the presence of ADP and absence of ATP, and it was unaffected by fragmentation. These results have important implications for experiments in which critical concentrations are compared under conditions that change the filament number concentrations.

Actins↗
PubMed1984

Evidence that F-actin can hydrolyze ATP independent of monomer-polymer end interactions.

The rate of ATP hydrolysis in solutions of F-actin at steady state in 50 mM KC1, 0.1 mM CaC12 was inhibited by AMP and ADP. The inhibition was competitive with ATP (Km of about 600 microM) with Ki values of 9 microM for AMP and 44 microM for ADP. ATP hydrolysis was inhibited greater than 95% by 1 mM AMP. AMP had no effect on the time course of actin polymerization, ATP hydrolysis during polymerization, or the critical actin concentration. Simultaneous measurements of G-actin/F-actin subunit exchange and nucleotide exchange showed that nucleotide exchange occurred much more rapidly than subunit exchange; during the experiment over 50% of the F-actin-bound nucleotide was replaced when less than 1% of the F-actin subunits had exchanged. When AMP was present it was incorporated into the polymer, preventing incorporation of ADP from ATP in solution. F-actin with bound Mg2+ was much less sensitive to AMP than F-actin with bound Ca2+. These data provide evidence for an ATP hydrolysis cycle associated with direct exchange of F-actin-bound ADP for ATP free in solution independent of monomer-polymer end interactions. This exchange and hydrolysis of nucleotide may be enhanced when Ca2+ is bound to the F-actin protomers.

Actins↗
PubMed1984

Compound kinetochores of the Indian muntjac. Evolution by linear fusion of unit kinetochores.

The chromosomes of the Indian muntjac (Muntiacus muntjak vaginalis) are unique among mammals due to their low diploid number (2N = 6 female, 7 male) and large size. It has been proposed that the karyotype of this small Asiatic deer evolved from a related deer the Chinese muntjac (Muntiacus reevesi) with a diploid chromosome number of 2n = 46 consisting of small telocentric chromosomes. In this study we utilized a kinetochore-specific antiserum derived from human patients with the autoimmune disease scleroderma CREST as an immunofluorescent probe to examine kinetochores of the two muntjac species. Since CREST antiserum binds to kinetochores of mitotic chromosomes as well as prekinetochores in interphase nuclei, it was possible to identify and compare kinetochore morphology throughout the cell cycle. Our observations indicated that the kinetochores of the Indian muntjac are composed of a linear beadlike array of smaller subunits that become revealed during interphase. The kinetochores of the Chinese muntjac consisted of minute fluorescent dots located at the tips of the 46 telocentric chromosomes. During interphase, however, the kinetochores of the Chinese muntjac clustered into small aggregates reminiscent of the beadlike arrays seen in the Indian muntjac. Morphometric measurements of fluorescence indicated an equivalent amount of stained material in the two species. Our observations indicate that the kinetochores of the Indian muntjac are compound structures composed of linear arrays of smaller units the size of the individual kinetochores seen on metaphase chromosomes of the Chinese muntjac. Our study supports the notion that the kinetochores of the Indian muntjac evolved by linear fusion of unit kinetochores of the Chinese muntjac. Moreover, it is concluded that the evolution of compound kinetochores may have been facilitated by the non-random aggregation of interphase kinetochores in the nuclei of the ancestral species.

Animals↗
PubMed1983

Effect of Acanthamoeba profilin on the pre-steady state kinetics of actin polymerization and on the concentration of F-actin at steady state.

The interaction of Acanthamoeba actin and Acanthamoeba profilin was evaluated as a function of ionic conditions. In the presence of 2 mM MgCl2 or 1 mM MgCl2 and 50 mM KCl, profilin decreased the concentration of F-actin at steady state, and inhibited the rates of filament elongation and spontaneous nucleation and polymerization. All of the experimental data were quantitatively accounted for on the basis of a 1:1 complex between profilin and monomeric actin with a Kr between 4 and 9 microM, the same value obtained previously in the absence of MgCl2. Therefore, the Mg2+ concentration did not affect the KD of the profilin-actin complex in these experiments. On the other hand, profilin did greatly amplify the decrease in concentration of F-actin at steady state caused by lowering the Mg2+ concentration. This results from the effect of Mg2+ on the critical concentration of the actin monomer with which the profilin-actin complex is in equilibrium. When the Mg2+ concentration is lowered, the critical concentration of actin monomer increases so that more profilin-actin complex is formed. Thus, appreciably more F-actin depolymerizes than in the absence of profilin. In this way, profilin could function intracellularly to convert small changes in critical concentration into large changes in the concentration of F-actin.

Actins↗
PubMed1983

On the mechanism of actin monomer-polymer subunit exchange at steady state.

The rate of exchange of G-actin with subunits of F-actin and the rate of hydrolysis of ATP in solutions of F-actin at steady state have been measured simultaneously. Subunit exchange kinetics were analyzed by both a treadmill model and an exchange-diffusion model. The best fit to a treadmill model of the data obtained in 0.5 mM MgCl2 and 0.2 mM ATP at 30 degrees C gave a treadmill efficiency (net monomers incorporated per ATP hydrolyzed) of 0.26, in good agreement with the previously reported s-value of 0.25 (Wegner, A. (1976) J. Mol. Biol. 108, 139-150) for similar ionic conditions. However, in this and other conditions with excess free divalent cations (Ca2+ or Mg2+), the observed exchange kinetics were in better agreement with an exchange-diffusion model than with a treadmilling model over the entire time course of the experiment. In the absence of excess divalent cations (50 mM KCl), exchange was too slow to be analyzed adequately by either model. Using the measured filament length distribution and the observed fit of the exchange-diffusion model to the data in 0.5 mM MgCl2, an on-rate constant of 2.8 x 10(6) M-1 S-1 and an off-rate constant of 5.8 s-1 were calculated. These values, while in good agreement with previously measured pre-steady state polymerization rate constants under different ionic conditions (Pollard, T. D., and Mooseker, M. S. (1981) J. Cell Biol. 88, 654-659), are about 30-fold higher than the rate constants predicted from the rate of ATP hydrolysis at steady state. To rationalize these discrepancies, a model is proposed in which a segment of F-actin subunits at one or both ends of the filament contains bound ATP at steady state.

Actins↗
PubMed1981

Tubulin assembly sites and the organization of cytoplasmic microtubules in cultured mammalian cells.

The number, distribution, and nucleating capacity of microtubule-organizing centers (MTOCs) has been investigated in a variety of cultured mammalian cells. Most interphase cells contain a single MTOC that is localized at the centrosome region and corresponds to the centriole and pericentriolar material. MTOCs, like centrioles, become duplicated during the S phase of the cell cycle and are equationally distributed to daughter cells in mitosis. Multiple MTOCs were rarely observed in cultured cells except in one cell line (neuroblastoma), which also displayed an equally large number of centrioles in the cytoplasm. The kinetics of microtubule assembly and the tubulin nucleating capacity of MTOCs was assayed by incubating tubulin-depleted, permeabilized 3T3 and simian virus 40-transformed 3T3 cells with phosphocellulose-purified 65 brain tubulin and microtubule assembly buffer. Initiation and assembly of 65 tubulin occurred in association with the cells' endogenous MTOCs, and the length, number, and distribution of microtubules generated about the organizing centers were regulated and cell specific. Our results are consistent with the notion that the specification of microtubule length, number, and spatial arrangement resides largely in the MTOCs and surrounding cytoplasm and not in the tubulin subunits.

Animals↗
PubMed1980

The effects of cytochalasins on actin polymerization and actin ATPase provide insights into the mechanism of polymerization.

Substoichiometric concentrations of cytochalasin D inhibited the rate of polymerization of actin in 0.5 mM MgCl2, increased its critical concentration and lowered its steady state viscosity. Stoichiometric concentrations of cytochalasin D in 0.5 mM MgCl2 and even substoichiometric concentrations of cytochalasin D in 30 mM KCl, however, accelerated the rate of actin polymerization, although still lowering the final steady state viscosity. Cytochalasin B, at all concentrations in 0.5 mM MgCl2 or in 30 mM KCl, accelerated the rate of polymerization and lowered the final steady state viscosity. In 0.5 mM MgCl2, cytochalasin D uncoupled the actin ATPase activity from actin polymerization, increasing the ATPase rate by at least 20 times while inhibiting polymerization. Cytochalasin B had a very much lower stimulating effect. Neither cytochalasin D nor B affected the actin ATPase activity in 30 mM KCl. The properties of cytochalasin E were intermediate between those of cytochalasin D and B. Cytochalasin D also stimulated the ATPase activity of monomeric actin in the absence of MgCl2 and KCl and, to a much greater extent, stimulated the ATPase activity of monomeric actin below its critical concentration in 0.5 mM MgCl2. Both above and below its critical concentration and in the presence and absence of cytochalasin D, the initial rate of actin ATPase activity, when little or no polymerization had occurred, was directly proportional to the actin concentration and, therefore, apparently was independent of actin-actin interactions. To rationalize all these data, a working model has been proposed in which the first step of actin polymerization is the conversion of monomeric actin-bound ATP, A . ATP, to monomeric actin-bound ADP and Pi, A* . ADP . Pi, which, like the preferred growing end of an actin filament, can bind cytochalasins.

Actins↗
PubMed1980

Laser microirradiation of kinetochores in mitotic PtK2 cells: chromatid separation and micronucleus formation.

Irradiation of the kinetochore region of PtK2 chromosomes by laser light of 532 nm was used to study the function of the kinetochore region in chromosome movement and to create an artificial micronuclei in cells. When the sister kinetochores of a chromosome were irradiated at prometaphase, the affected chromosome detached from the spindle and exhibited no further directed movements for the duration of mitosis. The chromatids of the chromosome remained attached to one another until anaphase, at which point they separated. No poleward movement of the chromatids was observed, and at telophase they passively moved to one of the daughter cells and were enclosed in a micronucleus. The daughter cell containing the micronucleus was then isolated by micromanipulation and followed through subsequent mitoses. At the next mitosis, two chromosomes, each with two chromatids, condensed in the micronucleus. These chromosomes did not attach to the spindle and showed chromatid separation, but no poleward movements at anaphase. They were again enclosed in micronuclei at telophase. The third generation mitosis was similar to the second. Occasionally, both the irradiation-produced and naturally occurring micronuclei exhibited no chromosome condensation at mitosis. Feulgen-stained monolayers of PtK2 cells with naturally occurring micronuclei showed that some micronuclei stain positive for DNA and others do not. This finding raises questions about the fate of chromosomes in a micronucleus.

Anaphase↗
PubMed1976

The role of long range forces in ordered arrays of tobacco mosaic virus.

We examine the role of electrostatic repulsion and van der Waals' attraction in determining interviral spacings in 'equilibrium' gels of tobacco mosaic virus. The observed spacings are inconsistent with a force-balance model. Experimental probes of the role of forces are suggested.

Chemical Phenomena↗