Search PubMed⌕ Search

Biomedical subjects

S Kuramitsu

Publications and source records attributed to S Kuramitsu.

At least 91 records · Page 5Linked to original sources

Thermostable aspartate aminotransferase from a thermophilic Bacillus species. Gene cloning, sequence determination, and preliminary x-ray characterization.

The gene encoding aspartate aminotransferase of a thermophilic Bacillus species, YM-2, has been cloned and expressed efficiently in Escherichia coli. The primary structure of the enzyme was deduced from nucleotide sequences of the gene and confirmed mostly by amino acid sequences of tryptic peptides. The gene consists of 1,176 base pairs encoding a protein of 392 amino acid residues; the molecular mass of the enzyme subunit is estimated to be 42,661 daltons. The active site lysyl residue that binds the coenzyme, pyridoxal phosphate, was identified as Lys-239. Comparison of the amino acid sequence with those of aspartate aminotransferases from other organisms revealed very low overall similarities (13-14%) except for the sequence of the extremely thermostable enzyme from Sulfolobus solfataricus (34%). Several amino acid residues conserved in all the compared sequences include those that have been reported to participate in binding of the coenzyme in three-dimensional structures of the vertebrate and E. coli enzymes. However, the strictly conserved arginyl residue that is essential for binding of the distal carboxyl group of substrates is not found in the corresponding region of the sequences of the thermostable enzymes from the Bacillus species and S. solfataricus. The Bacillus aspartate aminotransferase has been purified from the E. coli clone cell extracts on a large scale and crystallized in the buffered ammonium sulfate solution by the hanging drop method. The crystals are monoclinic with unit cell dimensions a = 121.2 A, b = 110.5 A, c = 81.8 A, and beta = 97.6 degrees, belonging to space group C2, and contain two molecules in the asymmetric unit. The crystals of the enzyme-alpha-methylaspartate complex are isomorphous with those without the substrate analog.

Amino Acid Sequence↗

Tyr225 in aspartate aminotransferase: contribution of the hydrogen bond between Tyr225 and coenzyme to the catalytic reaction.

Tyr225 in the active site of Escherichia coli aspartate aminotransferase (AspAT) was replaced by phenylalanine or arginine by site-directed mutagenesis. X-ray crystallographic analysis of Y225F AspAT showed that the benzene ring of Phe225 was situated at the same position as the phenol ring of Tyr225 in wild-type AspAT. The mutations resulted in a great decrease in the rate of the transamination reaction, suggesting that Tyr225 is important for efficient catalysis. The kinetic analysis of half-transamination reactions of Y225F AspAT with four substrates (aspartate, glutamate, oxalacetate, and 2-oxoglutarate) and some analogues (2-methylaspartate, succinate, and glutarate) revealed a considerable increase in the affinities for all these compounds. In contrast, affinity for the amino acid substrates was decreased by mutation to arginine, but affinities for the keto acid substrates and the two dicarboxylates (succinate and glutarate) were increased. The electrostatic interaction between O(3') of the coenzyme [pyridoxal 5'-phosphate (PLP)] and the residue at position 225 affected the pKa value of the Schiff base, which is formed between the epsilon-amino group of Lys258 and the aldehyde group of PLP; based on the spectrophotometric titration the pKa values were determined to be 6.8 for wild-type AspAT, 8.5 for Y225F AspAT, and 6.1 for Y225R AspAT in the absence of substrate. The absorption spectra of the three AspATs were almost identical in the acidic pH region, but the spectrum of Y225F AspAT differed from that of wild-type or Y225R AspAT in the alkaline pH region.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗

Replacement of an interdomain residue Val39 of Escherichia coli aspartate aminotransferase affects the catalytic competence without altering the substrate specificity of the enzyme.

Three mutant Escherichia coli aspartate aminotransferases in which Val39 was changed to Ala, Leu, and Phe by site-directed mutagenesis were prepared and characterized. Among the three mutant and the wild-type enzymes, the Leu39 enzyme had the lowest Km values for dicarboxylic substrates. The Km values of the Ala39 enzyme for dicarboxylates were essentially the same as those of the wild-type (Val39) enzyme. These two mutant enzymes showed essentially the same kcat values for dicarboxylic substrates as did the wild-type enzyme. On the other hand, incorporation of a bulky side-chain at position 39 (Phe39 enzyme) decreased both the affinity (1/Km) and catalytic ability (kcat) toward dicarboxylic substrates. These results show that the position 39 residue is involved in the modulation of both the binding of dicarboxylic substrates to enzyme and the catalytic ability of the enzyme. Although the replacement of Val39 with other residues altered both the kcat and Km values toward various substrates including dicarboxylic and aromatic amino acids and the corresponding oxo acids, it did not alter the ratio of the kcat/Km value of the enzyme toward a dicarboxylic substrate to that for an aromatic substrate. The affinity for aromatic substrates was not affected by changing the residue at position 39. These data indicate that, although the side chain bulkiness of the residue at position 39 correlates well with the activity toward aromatic substrates in the sequence alignment of several aminotransferases [Seville, M., Vincent M.G., & Hahn, K. (1988) Biochemistry 27, 8344-8349], the residue does not seem to be involved in the recognition of aromatic substrates.

Aspartate Aminotransferases↗

Purification and characterization of rho-crystallin from Japanese common bullfrog lens.

In a previous paper, we reported that the partial amino acid sequence (225 residues) from the COOH terminus of rho-crystallin from European common frog lens shows 77% similarity to that of prostaglandin (PG) F synthetase, an aldo-keto reductase, from bovine lung (Watanabe, K., Fujii, Y., Nakayama, K., Ohkubo, H., Kuramitsu, S., Kagamiyama, H., Nakanishi, S., and Hayaishi, O. (1988) Proc. Natl. Acad. Sci. U.S.A. 85, 11-15). Here rho-crystallin was purified to apparent homogeneity from the eye lens of the Japanese common bullfrog (Rana catesbeiana) by four sequential chromatographies using Sephadex G-100, Red Sepharose, and dual Mono S. Two types of rho-crystallin, RHO-I and RHO-II, named according to their elution order from a Mono S column, are essentially identical in terms of immunochemical properties, amino acid composition, and partial amino acid sequence. But the NH2-terminal Thr of RHO-I is blocked with an acyl group, while that of RHO-II is free. Both crystallins as well as PGF synthetase are monomeric proteins with a molecular weight of about 35,000 and they have the ability to bind NADPH with a stoichiometry of 0.75 mol of cofactor/mol of protein. Although rho-crystallin does not cross-react with antibody against PGF synthetase, the NH2-terminal amino acid sequence (107 residues) of rho-crystallin shows 77% similarity to that of the enzyme. However, PGD2, PGE2, 9,10-phenanthrenequinone, p-nitrobenzaldehyde, DL-glyceraldehyde, D-glucuronic acid, D-glucose, D-xylose, menadione, p-nitroacetophenone, dihydroxyacetone, succinic semialdehyde, phenylglyoxal, and testosterone were not substrates for these crystallins. PGH2 9,11-endoperoxide reductase activities of RHO-I and RHO-II were 1.3 and 1.0 milliunits/mg of protein, respectively, which are only about 2% of that of bovine lung PGF synthetase. These results indicate that the rho-crystallins RHO-I and RHO-II belong to a group of aldo-keto reductases based on primary structure, molecular properties, and NADPH-binding ability, but show only low PGH2 9,11-endoperoxide reductase activity.

Alcohol Dehydrogenase↗

Pre-steady-state kinetics of Escherichia coli aspartate aminotransferase catalyzed reactions and thermodynamic aspects of its substrate specificity.

The four half-transamination reactions [the pyridoxal form of Escherichia coli aspartate aminotransferase (AspAT) with aspartate or glutamate and the pyridoxamine form of the enzyme with oxalacetate or 2-oxoglutarate] were followed in a stopped-flow spectrometer by monitoring the absorbance change at either 333 or 358 nm. The reaction progress curves in all cases gave fits to a monophasic exponential process. Kinetic analyses of these reactions showed that each half-reaction is composed of the following three processes: (1) the rapid binding of an amino acid substrate to the pyridoxal form of the enzyme; (2) the rapid binding of the corresponding keto acid to the pyridoxamine form of the enzyme; (3) the rate-determining interconversion between the two complexes. This mechanism was supported by the findings that the equilibrium constants for half- and overall-transamination reactions and the steady-state kinetic constants (Km and kcat) agreed well with the predicted values on the basis of the above mechanism using pre-steady-state kinetic parameters. The significant primary kinetic isotope effect observed in the reaction with deuterated amino acid suggests that the withdrawal of the alpha-proton of the substrates is rate determining. The pyridoxal form of E. coli AspAT reacted with a variety of amino acids as substrates. The Gibbs free energy difference between the transition state and the unbound state (unbound enzyme plus free substrate), as calculated from the pre-steady-state kinetic parameters, showed a linear relationship with the accessible surface area of amino acid substrate bearing an uncharged side chain.(ABSTRACT TRUNCATED AT 250 WORDS)

Aspartate Aminotransferases↗

Effects of replacement of tryptophan-140 by phenylalanine or glycine on the function of Escherichia coli aspartate aminotransferase.

Trp140 of E. coli aspartate aminotransferase has been converted to Phe or Gly by site-directed mutagenesis. As compared to the wild-type enzyme, either of the mutant enzymes showed 10- to 100-fold increase in Km's for natural dicarboxylic substrates, but did not show appreciable changes in Km's for aromatic substrates. Teh kcat values for dicarboxylic and aromatic substrates were greatly decreased by [Trp140----Gly] mutation, but were decreased to lesser extents by [Trp140----Phe] mutation. These findings suggested that N(1) of Trp140 may not be essential for catalysis, but may be partly involved in the binding of the distal carboxylate group of the dicarboxylic substrates.

Aspartate Aminotransferases↗

Three isozymes of catechol 1,2-dioxygenase (pyrocatechase), alpha alpha, alpha beta, and beta beta, from Pseudomonas arvilla C-1.

Three isozymes of catechol 1,2-dioxygenase (pyrocatechase) from Pseudomonas arvilla C-1 were separated using DEAE-Toyopearl chromatography. The specific activities of each isozyme were similar to one another. The molecular weights of isozymes 1, 2, and 3 were estimated to be approximately 67,000, 64,000, and 59,000, respectively, from gel filtration. On sodium dodecyl sulfate-polyacrylamide gel electrophoresis, isozymes 1 and 3 gave a single protein band, corresponding to Mr = 32,000 and 30,000, respectively, and isozyme 2 gave two bands corresponding to Mr = 32,000 and 30,000. These results indicated that isozymes 1 and 3 were homodimers, while isozyme 2 was a heterodimer. The NH2-terminal sequences up to 20 residues of these three isozymes confirmed that isozymes 1, 2, and 3 consisted of beta beta, alpha beta, and alpha alpha, respectively, based on our previous data (Nakai, C., Kagamiyama, H., Saeki, Y., and Nozaki, M. (1979) Arch. Biochem. Biophys. 195, 12-22). Properties of these isozymes such as absorption spectrum, iron content, substrate specificity, and kinetic constants were similar to one another. Subunit exchange between the different isozymes and dissociation of the isozymes into subunits was not observed under nondenaturing conditions. Available evidence indicates that these isozymes exist naturally in the bacterium and were not due to artifacts caused by purification.

Amino Acid Sequence↗

Three-dimensional structures of aspartate aminotransferase from Escherichia coli and its mutant enzyme at 2.5 A resolution.

The structure of Escherichia coli aspartate aminotransferase complex with the inhibitor 2-methylaspartate, and that of the mutant enzyme in which an arginine was substituted for a lysine residue thereby forming a Schiff base with the coenzyme pyridoxal 5'-phosphate, were determined at 2.5 A resolution, by the molecular replacement method using the known structure of pig cytosolic aspartate aminotransferase. The enzyme catalyzes the reversible transamination between L-aspartate and alpha-ketoglutarate, and forms a dimeric structure of two identical subunits. Each subunit comprises two domains, a small and a large one. Although, in general, the overall and secondary structure of E. coli enzyme are similar to those of higher animals, some differences of enzymatic action between the enzyme from E. coli and those from higher animals could be explained on the basis of the X-ray structures and molecular mechanics calculation based on them.

Amino Acids↗

Purification and characterization of thermostable aspartate aminotransferase from a thermophilic Bacillus species.

Aspartate aminotransferase (EC 2.6.1.1) was purified to homogeneity from cell extracts of a newly isolated thermophilic bacterium, Bacillus sp. strain YM-2. The enzyme consisted of two subunits identical in molecular weight (Mr, 42,000) and showed microheterogeneity, giving two bands with pIs of 4.1 and 4.5 upon isoelectric focusing. The enzyme contained 1 mol of pyridoxal 5'-phosphate per mol of subunit and exhibited maxima at about 360 and 415 nm in absorption and circular dichroism spectra. The intensities of the two bands were dependent on the buffer pH; at neutral or slightly alkaline pH, where the enzyme showed its maximum activity, the absorption peak at 360 nm was prominent. The enzyme was specific for L-aspartate and L-cysteine sulfinate as amino donors and alpha-ketoglutarate as an amino acceptor; the KmS were determined to be 3.0 mM for L-aspartate and 2.6 mM for alpha-ketoglutarate. The enzyme was most active at 70 degrees C and had a higher thermostability than the enzyme from Escherichia coli. The N-terminal amino acid sequence (24 residues) did not show any similarity with the sequences of mammalian and E. coli enzymes, but several residues were identical with those of the thermoacidophilic archaebacterial enzyme recently reported.

Amino Acid Sequence↗

Substitution of a lysyl residue for arginine 386 of Escherichia coli aspartate aminotransferase.

Substitution of a lysyl residue for Arg-386 of Escherichia coli aspartate aminotransferase resulted in an extensive decrease in Vmax values (0.8% with the aspartate-2-oxoglutarate pair and 0.2% with the glutamate-oxalacetate pair, compared with the corresponding values for the wild-type enzyme). Kinetic analysis of the four sets of half-reactions, the pyridoxal form of the enzyme with aspartate or glutamate and the pyridoxamine form with 2-oxoglutarate or oxalacetate, allowed us to define the independent effect of the mutation on the reactivity of each substrate. Decrease in the first order rate constant (kmax) was more pronounced in the reactions with five-carbon substrates (glutamate and 2-oxoglutarate) than in those with four-carbon substrates (aspartate and oxalacetate), while the increase in the apparent dissociation constant (Kd) was greater for four-carbon substrates than for five-carbon substrates. The decrease of overall catalytic efficiency as judged by the values, kmax/Kd, was more pronounced in the reactions with five-carbon substrates than in those with four-carbon substrates. Affinities for substrate analogs such as succinate, glutarate, 2-methylaspartate, and erythro-3-hydroxyaspartate, were also considerably decreased by the mutation of the enzyme. These findings indicate that the side chain of the lysyl residue, although it bears a positive charge similar to that of the arginyl residue, is not structurally adequate for the productive binding of a substrate during catalysis.

Amino Acid Sequence↗

Probing the C4-binding site on C1s with monoclonal antibodies. Evidence for a C4/C4b-binding site on the gamma-domain.

The catalytic site for C4 of C1s has been presumed to consist of a C4-binding domain and a proteolytic domain. A mAb to C1s, M81, blocked C4 activation and C4 binding to C1s. M81 recognized the H chain of C1s. Using M81 as a probe, we tried to define C4-binding site on C1s. Plasmin digestion of C1s generated four products of Mr 58,000 (P1), 48,000 (P2), 37,000 (P3), and 27,000 (P4). These products, except for P2, all possessed a 26,000-Da H chain fragment (26k-HF) connected to variable-sized L chain pieces. 26k-HF alone had an ability to interact with M81. Amino-terminal amino acid analysis of 26k-HF mapped the epitope for M81 to domain IV and/or V of gamma-domain of C1s. The gamma-domain therefore contains the C4-binding site. The confirm and further elucidate the role of the C4-binding site for C4, we used a substrate-blotting technique in which labeled C4 was incubated with nitrocellulose membrane-fixed C1s and its fragments. C4 was successfully blotted onto C1s and P1, but not P2-P4; i.e., further degradation of the L chain led to the loss of C4-binding. During the incubation, most of the added C4 was converted to C4b. The binding was augmented, if the proteolytic activity of C1s and P1 was blocked, so that the added C4 remained intact. Although C4b also bound to C1s and P1, its binding was less effective and abolished by the addition of cold C4. Based on these results, the gamma-domain and the L chain constitute the catalytic site of C1s to activate C4 to C4b. Moreover, the generated C4b, although it still has weak affinity for C1s, can be replaced by newly coming C4.

Antibodies, Monoclonal↗

[Arg292----Val] or [Arg292----Leu] mutation enhances the reactivity of Escherichia coli aspartate aminotransferase with aromatic amino acids.

Arg292 of E. coli aspartate aminotransferase was substituted with valine or leucine by site-directed mutagenesis. In comparison with the wild-type enzyme, either of the mutant enzymes showed a decrease by over 5 orders of magnitude of kcat/km values for aspartate and glutamate. This supports the contention that Arg292 is important for determining the specificity of this enzyme for dicarboxylic substrates. In contrast, mutant enzymes displayed a 5- to 10-fold increase in kcat/Km values for aromatic amino acids as substrates. Thus, introduction of an uncharged, hydrophobic side chain into position 292 leads to a striking alteration in substrate specificity of this enzyme, thereby improving catalytic efficiency toward aromatic amino acids.

Amino Acid Sequence↗

The primary structure of thermostable D-amino acid aminotransferase from a thermophilic Bacillus species and its correlation with L-amino acid aminotransferases.

The gene for thermostable D-amino acid aminotransferase from a thermophile, Bacillus species YM-1 was cloned and expressed efficiently in Escherichia coli. The entire covalent structure of the enzyme was determined from the nucleotide sequence of the cloned gene and mostly confirmed by amino acid sequences of tryptic peptides from the gene product. The polypeptide is composed of 282 amino acid residues with a calculated molecular weight of 32,226. Comparison of the primary structure with those of various proteins registered in a protein data bank revealed a significant sequence homology between D-amino acid aminotransferase and the L-branched chain amino acid aminotransferase of E. coli (Kuramitsu, S., Ogawa, T., Ogawa, H., and Kagamiyama, H. (1985) J. Biochem. (Tokyo) 97, 993-999); the active site lysyl residue is located in an equivalent position in both enzyme sequences of similar size. Despite the difference in subunit composition and no immunochemical cross-reactivity, the sequences of the two enzymes show similar hydropathy profiles, and spectrophotometric properties of the enzyme-bound cofactor are also similar. The sequence homology suggests that the structural genes for D-amino acid and L-branched chain amino acid aminotransferases evolved from a common ancestral gene.

Amino Acid Sequence↗

cDNA cloning and expression of pig cytosolic aspartate aminotransferase in Escherichia coli: amino-terminal heterogeneity of expressed products and lack of its correlation with enzyme function.

A full-length cDNA encoding the pig cytosolic aspartate aminotransferase (EC 2.6.1.1) (cAspAT) was constructed from two overlapping cDNA clones. One clone (Lm pcAAT-8) isolated from a lambda gt10 pig heart cDNA library contained a 3' untranslated sequence, a poly(A) segment, and a part of the coding region for amino acid positions 127-412. Another clone (Lm pcAAT-107) isolated from a lambda gt10 primer extension library contained the coding region for amino acid positions 1-148 and a 5' untranslated sequence. Rejoining of the cDNA inserts of the two clones and recloning into pUC18 gave rise to a cDNA covering an entire coding sequence for pig cAspAT mRNA. Insertion into pKK223-3 yielded an expression plasmid, ppcAAT200. Escherichia coli JM105 cells transfected with ppcAAT200 overproduced pig cAspAT to an extent of about 3% of the total cellular soluble proteins. The expressed product was indistinguishable from the alpha subform of cAspAT isolated from pig heart in terms of specific activity, absorption spectra, molecular size, crystalline form, and immunological reactivity with anti pig cAspAT antibody. Compared with the amino-terminal sequence (Ala-Pro-Pro-) reported for pig heart cAspAT, the recombinant pig cAspAT showed heterogeneity in the amino-terminal sequence: Ala 1 (26%), Pro2 (54%), and Pro3 (19%). Construction of a mutant cAspAT with deletion of residues 1-3 and its comparison with the wild-type enzyme revealed that loss of the three amino-terminal residues does not affect the catalytic activity and structural integrity of the enzyme.

Amino Acid Sequence↗

Crystallization and preliminary X-ray characterization of branched-chain amino acid aminotransferase from Escherichia coli.

The branched-chain amino acid aminotransferase of Escherichia coli was crystallized in two crystal systems, monoclinic and tetragonal, from polyethylene glycol and ammonium sulfate solutions, pH 7.0, respectively. The crystals were of good quality, with diffractions extending beyond 2.8 A. The space group and unit cell dimensions of the monoclinic system crystals were determined from precession photographs to be C2, and a = 93.9, b = 143.6, c = 143.9 A and beta = 134.3 degrees. For the tetragonal system crystals, the possible space group P422 or P4122, and cell dimensions of a = b = 101 A and c = 249 A were determined. Three identical subunits exist per an asymmetric unit in both types of crystals.

Crystallization↗

A phospholipase A2 in the supernatant fraction of rat spleen. Its similarity to rat pancreatic phospholipase A2.

Rat spleen supernatant contained two forms of calcium-dependent cellular phospholipase A2 which could be separated from each other by TEAE-cellulose chromatography. The phospholipase A2, named PLA2 S-1, present in the major flow-through fraction was purified to homogeneity. The structural and catalytic properties of splenic PLA2 S-1 were systematically compared with those of rat pancreatic phospholipase A2. Structural evidence, including the sequence of the N-terminal 32 residues, peptide maps obtained on Achromobacter protease I digestion and cyanogen bromide cleavage, and the amino acid composition, showed the close similarity of the two enzymes. Their catalytic and immunochemical properties were also similar. These results demonstrated the existence of a pancreatic type phospholipase A2 in a non-pancreatic organ as a member of the cellular phospholipases A2 and suggest the potential functional involvement of pancreatic type phospholipase A2 in cellular phospholipid metabolism.

Amino Acid Sequence↗