Search PubMed⌕ Search

Biomedical subjects

S J Benkovic

Publications and source records attributed to S J Benkovic.

At least 19 recordsLinked to original sources
PubMed2001

A zinc ribbon protein in DNA replication: primer synthesis and macromolecular interactions by the bacteriophage T4 primase.

The gene product 61 primase protein from bacteriophage T4 was expressed as an intein fusion and purified to homogeneity. The primase binds one zinc ion, which is coordinated by four cysteine residues to form a zinc ribbon motif. Factors that influence the rate of priming were investigated, and a physiologically relevant priming rate of approximately 1 primer per second per primosome was achieved. Primase binding to the single-stranded binding protein (1 primase:4 gp32 monomers; K(d) approximately 860 nM) and to the helicase protein in the presence of DNA and ATP-gamma-S (1 primase:1 helicase monomer; K(d) approximately 100 nM) was investigated by isothermal titration calorimetry (ITC). Because the helicase is hexameric, the inferred stoichiometry of primase binding as part of the primosome is helicase hexamer:primase in a ratio of 1:6, suggesting that the active primase, like the helicase, might have a ring-like structure. The primase is a monomer in solution but binds to single-stranded DNA (ssDNA) primarily as a trimer (K(d) approximately 50-100 nM) as demonstrated by ITC and chemical cross-linking. Magnesium is required for primase-ssDNA binding. The minimum length of ssDNA required for stable binding is 22-24 bases, although cross-linking reveals transient interactions on oligonucleotides as short as 8 bases. The association is endothermic at physiologically relevant temperatures, which suggests an overall gain in entropy upon binding. Some possible sources of this gain in entropy are discussed.

Bacteriophage T4↗
PubMed2001

Unexpected formation of an epoxide-derived multisubstrate adduct inhibitor on the active site of GAR transformylase.

Multisubstrate adduct inhibitors (MAI) of glycinamide ribonucleotide transformylase (GAR Tfase), which incorporate key features of the folate cofactor and the beta-GAR substrate, typically exhibit K(i)'s in the picomolar range. However, these compounds have reduced bioavailability due to the incorporation of a negatively charged phosphate moiety that prevents effective cellular uptake. Thus, a folate analogue that is capable of adduct formation with the substrate on the enzyme active site could lead to a potent GAR Tfase inhibitor that takes advantage of the cellular folate transport systems. We synthesized a dibromide folate analogue, 10-bromo-10-bromomethyl-5,8,10-trideazafolic acid, that was an intermediate designed to assemble with the substrate beta-GAR on the enzyme active site. We have now determined the crystal structure of the Escherichia coli GAR Tfase/MAI complex at 1.6 A resolution to ascertain the nature and mechanism of its time-dependent inhibition. The high-resolution crystal structure clearly revealed the existence of a covalent adduct between the substrate beta-GAR and the folate analogue (K(i) = 20 microM). However, the electron density map surprisingly indicated a C10 hydroxyl in the adduct rather than a bromide and suggested that the multisubstrate adduct is not formed directly from the dibromide but proceeds via an epoxide. Subsequently, we demonstrated the in situ conversion of the dibromide to the epoxide. Moreover, synthesis of the authentic epoxide confirmed that its inhibitory, time-dependent, and cytotoxic properties are comparable to those of the dibromide. Further, inhibition was strongest when the dibromide or epoxide is preincubated with both enzyme and substrate, indicating that inhibition occurs via the enzyme-dependent formation of the multisubstrate adduct. Thus, the crystal structure revealed the successful formation of an enzyme-assembled multisubstrate adduct and highlighted a potential application for epoxides, and perhaps aziridines, in the design of efficacious GAR Tfase inhibitors.

Binding Sites↗
PubMed2001

Creating multiple-crossover DNA libraries independent of sequence identity.

We have developed, experimentally implemented, and modeled in silico a methodology named SCRATCHY that enables the combinatorial engineering of target proteins, independent of sequence identity. The approach combines two methods for recombining genes: incremental truncation for the creation of hybrid enzymes and DNA shuffling. First, incremental truncation for the creation of hybrid enzymes is used to create a comprehensive set of fusions between fragments of genes in a DNA homology-independent fashion. This artificial family is then subjected to a DNA-shuffling step to augment the number of crossovers. SCRATCHY libraries were created from the glycinamide-ribonucleotide formyltransferase (GART) genes from Escherichia coli (purN) and human (hGART). The developed modeling framework eSCRATCHY provides insight into the effect of sequence identity and fragmentation length on crossover statistics and draws contrast with DNA shuffling. Sequence analysis of the naive shuffled library identified members with up to three crossovers, and modeling predictions are in good agreement with the experimental findings. Subsequent in vivo selection in an auxotrophic E. coli host yielded functional hybrid enzymes containing multiple crossovers.

Algorithms↗
PubMed2001

Backbone dynamics in dihydrofolate reductase complexes: role of loop flexibility in the catalytic mechanism.

To elucidate the influence of local motion of the polypeptide chain on the catalytic mechanism of an enzyme, we have measured (15)N relaxation data for Escherichia coli dihydrofolate reductase in three different complexes, representing different stages in the catalytic cycle of the enzyme. NMR relaxation data were analyzed by the model-free approach, corrected for rotational anisotropy, to provide insights into the backbone dynamics. There are significant differences in the backbone dynamics in the different complexes. Complexes in which the cofactor binding site is occluded by the Met20 loop display large amplitude motions on the picosecond/nanosecond time scale for residues in the Met20 loop, the adjacent betaF-betaG loop and for residues 67-69 in the adenosine binding loop. Formation of the closed Met20 loop conformation in the ternary complex with folate and NADP(+), results in attenuation of the motions in the Met20 loop and the betaF-betaG loop but leads to increased flexibility in the adenosine binding loop. New fluctuations on a microsecond/millisecond time scale are observed in the closed E:folate:NADP(+) complex in regions that form hydrogen bonds between the Met20 and the betaF-betaG loops. The data provide insights into the changes in backbone dynamics during the catalytic cycle and point to an important role of the Met20 and betaF-betaG loops in controlling access to the active site. The high flexibility of these loops in the occluded conformation is expected to promote tetrahydrofolate-assisted product release and facilitate binding of the nicotinamide ring to form the Michaelis complex. The backbone fluctuations in the Met20 loop become attenuated once it closes over the active site, thereby stabilizing the nicotinamide ring in a geometry conducive to hydride transfer. Finally, the relaxation data provide evidence for long-range motional coupling between the adenosine binding loop and distant regions of the protein.

Binding Sites↗
PubMed2001

Building a replisome solution structure by elucidation of protein-protein interactions in the bacteriophage T4 DNA polymerase holoenzyme.

Assembly of DNA replication systems requires the coordinated actions of many proteins. The multiprotein complexes formed as intermediates on the pathway to the final DNA polymerase holoenzyme have been shown to have distinct structures relative to the ground-state structures of the individual proteins. By using a variety of solution-phase techniques, we have elucidated additional information about the solution structure of the bacteriophage T4 holoenzyme. Photocross-linking and mass spectrometry were used to demonstrate interactions between I107C of the sliding clamp and the DNA polymerase. Fluorescence resonance energy transfer, analytical ultracentrifugation, and isothermal titration calorimetry measurements were used to demonstrate that the C terminus of the DNA polymerase can interact at two distinct locations on the sliding clamp. Both of these binding modes may be used during holoenzyme assembly, but only one of these binding modes is found in the final holoenzyme. Present and previous solution interaction data were used to build a model of the holoenzyme that is consistent with these data.

Biotin↗
PubMed2001

Creating a dynamic picture of the sliding clamp during T4 DNA polymerase holoenzyme assembly by using fluorescence resonance energy transfer.

The coordinated assembly of the DNA polymerase (gp43), the sliding clamp (gp45), and the clamp loader (gp44/62) to form the bacteriophage T4 DNA polymerase holoenzyme is a multistep process. A partially opened toroid-shaped gp45 is loaded around DNA by gp44/62 in an ATP-dependent manner. Gp43 binds to this complex to generate the holoenzyme in which gp45 acts to topologically link gp43 to DNA, effectively increasing the processivity of DNA replication. Stopped-flow fluorescence resonance energy transfer was used to investigate the opening and closing of the gp45 ring during holoenzyme assembly. By using two site-specific mutants of gp45 along with a previously characterized gp45 mutant, we tracked changes in distances across the gp45 subunit interface through seven conformational changes associated with holoenzyme assembly. Initially, gp45 is partially open within the plane of the ring at one of the three subunit interfaces. On addition of gp44/62 and ATP, this interface of gp45 opens further in-plane through the hydrolysis of ATP. Addition of DNA and hydrolysis of ATP close gp45 in an out-of-plane conformation. The final holoenzyme is formed by the addition of gp43, which causes gp45 to close further in plane, leaving the subunit interface open slightly. This open interface of gp45 in the final holoenzyme state is proposed to interact with the C-terminal tail of gp43, providing a point of contact between gp45 and gp43. This study further defines the dynamic process of bacteriophage T4 polymerase holoenzyme assembly.

Adenosine Triphosphate↗
PubMed2001

Localization of GAR transformylase in Escherichia coli and mammalian cells.

Enzymes of the de novo purine biosynthetic pathway may form a multienzyme complex to facilitate substrate flux through the ten serial steps constituting the pathway. One likely strategy for complex formation is the use of a structural scaffold such as the cytoskeletal network or subcellular membrane of the cell to mediate protein-protein interactions. To ascertain whether this strategy pertains to the de novo purine enzymes, the localization pattern of the third purine enzyme, glycinamide ribonucleotide transformylase (GAR Tfase) was monitored in live Escherichia coli and mammalian cells. Genes encoding human as well as E. coli GAR Tfase fused with green fluorescent protein (GFP) were introduced into their respective cells with regulated expression of proteins and localization patterns monitored by using confocal fluorescence microscopy. In both instances images showed proteins to be diffused throughout the cytoplasm. Thus, GAR Tfase is not localized to an existing cellular architecture, so this device is probably not used to concentrate the members of the pathway. However, discrete clusters of the pathway may still exist throughout the cytoplasm.

Animals↗
PubMed2001

Evaluation of the catalytic mechanism of AICAR transformylase by pH-dependent kinetics, mutagenesis, and quantum chemical calculations.

The catalytic mechanism of 5-aminoimidazole-4-carboxamide ribonucleotide transformylase (AICAR Tfase) is evaluated with pH dependent kinetics, site-directed mutagenesis, and quantum chemical calculations. The chemistry step, represented by the burst rates, was not pH-dependent, which is consistent with our proposed mechanism that the 4-carboxamide of AICAR assists proton shuttling. Quantum chemical calculations on a model system of 5-amino-4-carboxamide imidazole (AICA) and formamide using the B3LYP/6-31G level of theory confirmed that the 4-carboxamide participated in the proton-shuttling mechanism. The result also indicated that the amide-assisted mechanism is concerted such that the proton transfers from the 5-amino group to the formamide are simultaneous with nucleophilic attack by the 5-amino group. Because the process does not lead to a kinetically stable intermediate, the intramolecular proton transfer from the 5-amino group through the 4-carboxamide to the formamide proceeds in the same transition state. Interestingly, the calculations predicted that protonation of the N3 of the imidazole of AICA would reduce the energy barrier significantly. However, the pK(a) of the imidazole of AICAR was determined to be 3.23 +/- 0.01 by NMR titration, and AICAR is likely to bind to the enzyme with its imidazole in the free base form. An alternative pathway was suggested by modeling Lys266 to have a hydrogen-bonding interaction with the N3 of the imidazole of AICAR. Lys266 has been implicated in catalysis based on mutagenesis studies and the recent X-ray structure of AICAR Tfase. The quantum chemical calculations on a model system that contains AICA complexed with CH3NH3+ as a mimic of the Lys residue confirmed that such an interaction lowered the activation energy of the reaction and likewise implicated the 4-carboxamide. To experimentally verify this hypothesis, we prepared the K266R mutant and found that its kcat is reduced by 150-fold from that of the wild type without changes in substrate and cofactor Km values. The kcat-pH profile indicated virtually no pH-dependence in the pH range 6-10.5. The results suggest that the ammonium moiety of Lys or Arg is important in catalysis, most likely acting as a general acid catalyst with a pK(a) value greater than 10.5. The H267A mutant was also prepared since His267 has been found in the active site and implicated in catalysis. The mutant enzyme showed no detectable activity while retaining its binding affinity for substrate, indicating that it plays a critical role in catalysis. We propose that His267 interacts with Lys266 to aid in the precise positioning of the general acid catalyst to the N3 of the imidazole of AICAR.

Binding Sites↗
PubMed2001

Identification and mapping of protein-protein interactions between gp32 and gp59 by cross-linking.

The bacteriophage T4 59 protein (gp59) plays a vital role in recombination and replication by promoting the assembly of the gene 41 helicase (gp41) onto DNA, thus enabling replication as well as strand exchange in recombination. Loading of the helicase onto gp32 (the T4 single strand binding protein)-coated single-stranded DNA requires gp59 to remove gp32 and replace it with gp41. Cross-linking studies between gp32 and gp59 reveal an interaction between Cys-166 of gp32 and Cys-42 of gp59. Since Cys-166 lies in the DNA binding core domain of gp32, this interaction may affect the association of gp32 with DNA. In the presence of gp32 or DNA, gp59 is capable of forming a multimer consisting of at least five gp59 subunits. Kinetics studies suggest that gp59 and gp41 exist in a one-to-one ratio, predicting that gp59 is capable of forming a hexamer (Raney, K. D., Carver, T. E., and Benkovic, S. J. (1996) J. Biol. Chem. 271, 14074-14081). The C-terminal A-domain of gp32 is needed for gp59 oligomer formation. Cross-linking has established that gp59 can interact with gp32-A (a truncated form of gp32 lacking the A-domain) but cannot form higher species. The results support a model in which gp59 binds to gp32 on a replication fork, destabilizing the gp32-single-stranded DNA interaction concomitant with the oligomerization of gp59 that results in a switching of gp41 for gp32 at the replication fork.

Adenosine Triphosphatases↗
PubMed2001

Multimeric structure of the secreted meprin A metalloproteinase and characterization of the functional protomer.

Meprin A secreted from kidney and intestinal epithelial cells is capable of cleaving growth factors, extracellular matrix proteins, and biologically active peptides. The secreted form of meprin A is a homo-oligomer composed of alpha subunits, a multidomain protease of 582 amino acids coded for near the major histocompatibility complex of the mouse and human genome. Analyses of the recombinant homo-oligomeric form of mouse meprin A by gel filtration, nondenaturing gel electrophoresis, and cross-linking (with disuccinimidyl suberate or N-(4-azido-2,3,5,6-tetraflourobenzyl)-3-maleimidylpropionamide) indicate that the secreted enzyme forms high molecular weight multimers, with a predominance of decamers. The multimers are composed of disulfide-linked dimers attached noncovalently by interactions involving the meprin, A5 protein, receptor protein-tyrosine phosphatase mu (MAM) domain. The active protomer is the noncovalently linked dimer. Linkage of active protomers by disulfide-bonds results in an oligomer of approximately 900 kDa, which is unique among proteases and distinguishes meprin A as the largest known secreted protease. Electron microscopy revealed that the protein was present in two states, a crescent-shaped structure and a closed ring. It is concluded from this and other data that the covalent attachment of the protomers enables noncovalent associations of the native enzyme to form higher oligomers that are critical for hydrolysis of protein substrates.

Animals↗
PubMed2001

Predicting crossover generation in DNA shuffling.

We introduce a quantitative framework for assessing the generation of crossovers in DNA shuffling experiments. The approach uses free energy calculations and complete sequence information to model the annealing process. Statistics obtained for the annealing events then are combined with a reassembly algorithm to infer crossover allocation in the reassembled sequences. The fraction of reassembled sequences containing zero, one, two, or more crossovers and the probability that a given nucleotide position in a reassembled sequence is the site of a crossover event are estimated. Comparisons of the predictions against experimental data for five example systems demonstrate good agreement despite the fact that no adjustable parameters are used. An in silico case study of a set of 12 subtilases examines the effect of fragmentation length, annealing temperature, sequence identity and number of shuffled sequences on the number, type, and distribution of crossovers. A computational verification of crossover aggregation in regions of near-perfect sequence identity and the presence of synergistic reassembly in family DNA shuffling is obtained.

Algorithms↗
PubMed2001

Rapid generation of incremental truncation libraries for protein engineering using alpha-phosphothioate nucleotides.

Incremental truncation for the creation of hybrid enzymes (ITCHY) is a novel tool for the generation of combinatorial libraries of hybrid proteins independent of DNA sequence homology. We herein report a fundamentally different methodology for creating incremental truncation libraries using nucleotide triphosphate analogs. Central to the method is the polymerase catalyzed, low frequency, random incorporation of alpha-phosphothioate dNTPs into the region of DNA targeted for truncation. The resulting phosphothioate internucleotide linkages are resistant to 3'-->5' exonuclease hydrolysis, rendering the target DNA resistant to degradation in a subsequent exonuclease III treatment. From an experimental perspective the protocol reported here to create incremental truncation libraries is simpler and less time consuming than previous approaches by combining the two gene fragments in a single vector and eliminating additional purification steps. As proof of principle, an incremental truncation library of fusions between the N-terminal fragment of Escherichia coli glycinamide ribonucleotide formyltransferase (PurN) and the C-terminal fragment of human glycinamide ribonucleotide formyltransferase (hGART) was prepared and successfully tested for functional hybrids in an auxotrophic E.coli host strain. Multiple active hybrid enzymes were identified, including ones fused in regions of low sequence homology.

Amino Acid Sequence↗
PubMed2001

Familial mutations and zinc stoichiometry determine the rate-limiting step of nitrocefin hydrolysis by metallo-beta-lactamase from Bacteroides fragilis.

The diverse members of the metallo-beta-lactamase family are a growing clinical threat evolving under considerable selective pressure. The enzyme from Bacillus cereus differs from the Bacteroides fragilis enzyme in sequence, zinc stoichiometry, and mechanism. To chart the evolution of the more reactive B. fragilis enzyme, we have made changes in an active site cysteine residue as well as in zinc content to mimic that which occurs in the B. cereus enzyme. Specifically, by introducing a C104R mutation into the B. fragilis enzyme, binding of two zinc ions is maintained, but the k(cat) value for nitrocefin hydrolysis is decreased from 226 to 14 s(-)(1). Removal of 1 equiv of zinc from this mutant further decreases k(cat) to 4.4 s(-)(1). In both cases, the observed k(cat) closely approximates that found in the di- and monozinc forms of the B. cereus enzyme (12 and 6 s(-)(1), respectively). Pre-steady-state stopped-flow studies using nitrocefin as a substrate indicate that these enzyme forms share a similar mechanism featuring an anionic intermediate but that the rate-limiting step changes from protonation of that species to the C-N bond cleavage leading to the intermediate. Overall, features that contribute 3.7 kcal/mol toward the acceleration of the C-N bond cleavage step have been uncovered although some of the total acceleration is masked in the steady-state by a change in rate-limiting step. These experiments illustrate one step in the evolution of a catalytic mechanism and, in a larger perspective, one step in the evolution of antibiotic resistance mechanisms.

Amino Acid Substitution↗
PubMed2001

Identification of the active oligomeric state of an essential adenine DNA methyltransferase from Caulobacter crescentus.

Caulobacter crescentus contains one of the two known prokaryotic DNA methyltransferases that lacks a cognate endonuclease. This endogenous cell cycle regulated adenine DNA methyltransferase (CcrM) is essential for C. crescentus cellular viability. DNA methylation catalyzed by CcrM provides an obligatory signal for the proper progression through the cell cycle. To further our understanding of the regulatory role played by CcrM, we sought to investigate its biophysical properties. In this paper we employed equilibrium ultracentrifugation, velocity ultracentrifugation, and chemical cross-linking to show that CcrM is dimeric at physiological concentrations. However, surface plasmon resonance experiments in the presence of S-adenosyl-homocysteine evince that CcrM binds as a monomer to a defined hemi-methylated DNA substrate containing the canonical methylation sequence, GANTC. Initial velocity experiments demonstrate that dimerization of CcrM does not affect DNA methylation. Collectively, these findings suggest that CcrM is active as a monomer and provides a possible in vivo role for dimerization as a means to stabilize CcrM from premature catabolism.

Base Sequence↗
PubMed2001

Interloop contacts modulate ligand cycling during catalysis by Escherichia coli dihydrofolate reductase.

As a continuation to our studies on the importance of interloop interactions in the Escherichia coli DHFR catalytic cycle, we have investigated the role of the betaG-betaH loop in modulating the closed and occluded conformations of the Met20 loop during the DHFR catalytic cycle. Specifically, to assess the importance of the hydrogen bond formed between Ser148 in the betaG-betaH loop and the Met20 loop, Ser148 was independently substituted with aspartic acid, alanine, and lysine. Moreover, the betaG-betaH loop was deleted entirely to yield the Delta(146-148) DHFR mutant. Steady-state turnover rates for all mutants were at most 3-fold lower than the wild-type rate. Lack of an isotope effect on this rate indicated the chemistry step does not contribute to the steady-state turnover. Consistent with this finding, hydride transfer rates for the DHFR mutants were at least 10-fold greater than the observed steady-state rates. The values ranged from a 30% decrease (Ser148Ala and Ser148Lys) to a 50% increase (Ser148Asp) in rate relative to that of the wild type. Modifications of the betaG-betaH loop enhanced the affinity for the cofactor and decreased the affinity for pterin, as determined by the K(D) values of the mutant proteins. Further analysis of Ser148Ala and Delta(146-148) DHFRs indicated these effects were manifest mainly in ligand off rates, although in some cases the on rate was affected. The Ser148Asp and Delta(146-148) mutations perturbed the preferred catalytic cycle through the introduction of branching at key intermediates. Rather than following the single WT pathway which involves loss of NADP(+) and rebinding of NADPH to precede loss of the product H4F (negative cooperativity), the mutants can reenter the catalytic cycle through different pathways. These findings suggest that the role of the interloop interaction between the betaG-betaH loop and the Met20 loop is to modulate ligand off rates allowing for proper cycling through the preferred kinetic pathway.

Catalysis↗
PubMed2001

Dynamic protein interactions in the bacteriophage T4 replisome.

The bacteriophage T4 DNA replisome is a complex dynamic system employing a variety of proteins to orchestrate the synthesis of DNA on both the leading and lagging strands. Assembly of the protein complexes responsible for DNA synthesis and priming requires the coordination of transient biomolecular interactions. This interplay of proteins has been dissected through the use of small molecules including fluorescent probes and crosslinkers, enabling the development of a complex dynamic structural and kinetic model for DNA polymerase holoenzyme assembly and primosome formation.

Bacteriophage T4↗
PubMed2001

Intricacies in ATP-dependent clamp loading: variations across replication systems.

DNA replication requires the coordinated effort of many proteins to create a highly processive biomachine able to replicate entire genomes in a single process. The clamp proteins confer on replisomes this property of processivity but in turn require clamp loaders for their functional assembly onto DNA. A more detailed view of the mechanisms for holoenzyme assembly in replication systems has been obtained from the advent of novel solution experiments and the appearance of low- and high-resolution structures for the clamp loaders.

Adenosine Triphosphate↗