Biomedical subjects

S D Tanksley

Publications and source records attributed to S D Tanksley.

At least 37 records · Page 2Linked to original sources

PubMed1998

Identification of trait-improving quantitative trait loci alleles from a wild rice relative, Oryza rufipogon.

Wild species are valued as a unique source of genetic variation, but they have rarely been used for the genetic improvement of quantitative traits. To identify trait-improving quantitative trait loci (QTL) alleles from exotic species, an accession of Oryza rufipogon, a relative of cultivated rice, was chosen on the basis of a genetic diversity study. An interspecific BC2 testcross population (V20A/O. rufipogon//V20B///V20B////Ce64) consisting of 300 families was evaluated for 12 agronomically important quantitative traits. The O. rufipogon accession was phenotypically inferior for all 12 traits. However, transgressive segregants that outperformed the original elite hybrid variety, V20A/Ce64, were observed for all traits examined. A set of 122 RFLP and microsatellite markers was used to identify QTL. A total of 68 significant QTL were identified, and of these, 35 (51%) had beneficial alleles derived from the phenotypically inferior O. rufipogon parent. Nineteen (54%) of these beneficial QTL alleles were free of deleterious effects on other characters. O. rufipogon alleles at two QTL on chromosomes 1 and 2 were associated with an 18 and 17% increase in grain yield per plant, respectively, without delaying maturity or increasing plant height. This discovery suggests that the innovative use of molecular maps and markers can alter the way geneticists utilize wild and exotic germplasm.

Alleles↗

PubMed1997

Seed banks and molecular maps: unlocking genetic potential from the wild.

Nearly a century has been spent collecting and preserving genetic diversity in plants. Germplasm banks-living seed collections that serve as repositories of genetic variation-have been established as a source of genes for improving agricultural crops. Genetic linkage maps have made it possible to study the chromosomal locations of genes for improving yield and other complex traits important to agriculture. The tools of genome research may finally unleash the genetic potential of our wild and cultivated germplasm resources for the benefit of society.

Chromosome Mapping↗

PubMed1997

Map-based cloning of the tomato genomic region that spans the Sw-5 tospovirus resistance gene in tomato.

Two yeast artificial chromosomes (YACs) containing genomic DNA from tomato have been isolated using CT220, an RFLP marker which is tightly linked to the tomato spotted wilt virus resistance gene, Sw-5. High-resolution mapping of the YAC ends and internal YAC probes demonstrated that one of the YAC clones, TY257 (400 kb), spans Sw-5. By chromosome walking in a cosmid library, the position of Sw-5 has been delimited within the YAC to a maximal chromosomal segment of 100 kb, spanned by nine overlapping cosmid clones.

Chromosome Mapping↗

PubMed1997

An interspecific backcross of Lycopersicon esculentum x L. hirsutum: linkage analysis and a QTL study of sexual compatibility factors and floral traits.

A BC1 population of the self-compatible tomato Lycopersicon esculentum and its wild self-incompatible relative L. hirsutum f. typicum was used for restriction fragment length polymorphism linkage analysis and quantitative trait loci (QTL) mapping of reproductive behavior and floral traits. The self-incompatibility locus, S, on chromosome 1 harbored the only QTL for self-incompatibility indicating that the transition to self-compatibility in the lineage leading to the cultivated tomato was primarily the result of mutations at the S locus. Moreover, the major QTL controlling unilateral incongruity also mapped to the S locus, supporting the hypothesis that self-incompatibility and unilateral incongruity are not independent mechanisms. The mating behavior of near-isogenic lines carrying the L. hirsutum allele for the S locus on chromosome 1 in an otherwise L. esculentum background support these conclusions. The S locus region of chromosome 1 also harbors most major QTL for several floral traits important to pollination biology (e.g., number and size of flowers), suggesting a gene complex controlling both genetic and morphological mechanisms of reproduction control. Similar associations in other flowering plants suggest that such complex may have been conserved since early periods of plant evolution or else reflect a convergent evolutionary process.

Chromosome Mapping↗

PubMed1996

High-resolution mapping and isolation of a yeast artificial chromosome contig containing fw2.2: a major fruit weight quantitative trait locus in tomato.

A high-resolution physical and genetic map of a major fruit weight quantitative trait locus (QTL), fw2.2, has been constructed for a region of tomato chromosome 2. Using an F(2) nearly isogenic line mapping population (3472 individuals) derived from Lycopersicon esculentum (domesticated tomato) x Lycopersicon pennellii (wild tomato), fw2.2 has been placed near TG91 and TG167, which have an interval distance of 0.13 +/- 0.03 centimorgan. The physical distance between TG91 and TG167 was estimated to be </= 150 kb by pulsed-field gel electrophoresis of tomato DNA. A physical contig composed of six yeast artificial chromosomes (YACs) and encompassing fw2.2 was isolated. No rearrangements or chimerisms were detected within the YAC contig based on restriction fragment length polymorphism analysis using YAC-end sequences and anchored molecular markers from the high-resolution map. Based on genetic recombination events, fw2.2 could be narrowed down to a region less than 150 kb between molecular markers TG91 and HSF24 and included within two YACs: YAC264 (210 kb) and YAC355 (300 kb). This marks the first time, to our knowledge, that a QTL has been mapped with such precision and delimited to a segment of cloned DNA. The fact that the phenotypic effect of the fw2.2 QTL can be mapped to a small interval suggests that the action of this QTL is likely due to a single gene. The development of the high-resolution genetic map, in combination with the physical YAC contig, suggests that the gene responsible for this QTL and other QTLs in plants can be isolated using a positional cloning strategy. The cloning of fw2.2 will likely lead to a better understanding of the molecular biology of fruit development and to the genetic engineering of fruit size characteristics.

Journal Article↗

PubMed1996

Stable transfer of intact high molecular weight DNA into plant chromosomes.

In conjunction with an enhanced system for Agrobacterium-mediated plant transformation, a new binary bacterial artificial chromosome (BIBAC) vector has been developed that is capable of transferring at least 150 kb of foreign DNA into a plant nuclear genome. The transferred DNA appears to be intact in the majority of transformed tobacco plants analyzed and is faithfully inherited in the progeny. The ability to introduce high molecular weight DNA into plant chromosomes should accelerate gene identification and genetic engineering of plants and may lead to new approaches in studies of genome organization.

Base Sequence↗

PubMed1996

Telomere-homologous sequences occur near the centromeres of many tomato chromosomes.

Several bacteriophage lambda clones containing interstitial telomere repeats (ITR) were isolated from a library of tomato genomic DNA by plaque hybridization with the cloned Arabidopsis thaliana telomere repeat. Restriction fragments lacking highly repetitive DNA were identified and used as probes to map 14 of the 20 lambda clones. All of these markers mapped near the centromere on eight of the twelve tomato chromosomes. The exact centromere location of chromosomes 7 and 9 has recently been determined, and all ITR clones that localize to these two chromosomes map to the marker clusters known to contain the centromere. High-resolution mapping of one of these markers showed cosegregation of the telomere repeat with the marker cluster closest to the centromere in over 9,000 meiotic products. We propose that the map location of interstitial telomere clones may reflect specific sequence interchanges between telomeric and centromeric regions and may provide an expedient means of localizing centromere positions.

Arabidopsis↗

PubMed1996

Molecular mapping of the centromeres of tomato chromosomes 7 and 9.

The centromeres of two tomato chromosomes have been precisely localized on the molecular linkage map through dosage analysis of trisomic stocks. To map the centromeres of chromosomes 7 and 9, complementary telo-, secondary, and tertiary trisomic stocks were used to assign DNA markers to their respective chromosome arms and thus to localize the centromere at the junction of the short and long arms. It was found that both centromeres are situated within a cluster of cosegregating markers. In an attempt to order the markers within the centric clusters, genetic maps of the centromeric regions of chromosomes 7 and 9 were constructed from F2 populations of 1620 Lycopersicon esculentum x L. pennellii (E x P) plants and 1640 L. esculentum x L. pimpinellifolium (E x PM) plants. Despite the large number of plants analyzed, very few recombination events were detected in the centric regions, indicating a significant suppression of recombination at this region of the chromosome. The fact that recombination suppression is equally strong in crosses between closely related (E x PM) and remotely related (E x P) parents suggests that centromeric suppression is not due to DNA sequence mismatches but to some other mechanism. The greatest number of centromeric markers was resolved in the L. esculentum x L. pennellii F2 population. The centromere of chromosome 7 is surrounded by eight cosegregating markers: three on the short arm, five on the long arm. Similarly, the centric region of chromosome 9 contains ten cosegregating markers including one short arm marker and nine long arm markers. The localization of centromeres to precise intervals on the molecular linkage map represents the first step towards the characterization and ultimate isolation of tomato centromeres.

Centromere↗

PubMed1996

Characterization and genetic mapping of simple repeat sequences in the tomato genome.

Tomato genomic libraries were screened for the presence of simple sequence repeats (SSRs) with seventeen synthetic oligonucleotide probes, consisting of 2- to 5-basepair motifs repeated in tandem. GAn and GTn sequences were found to occur most frequently in the tomato genome (every 1.2 Mb), followed by ATTn and GCCn (every 1.4 Mb and 1.5 Mb, respectively). In contrast, only ATn and GAn microsatellites (n > 7) were found to be frequent in the GenBank database, suggesting that other motifs may be preferentially located away from genes. Polymorphism of microstellites was measured by PCR amplification of individual loci of by Southern hybridization, using a set of ten tomato cultivars. Surprisingly, only two of the nine microsatellite clones surveyed (five GTn, three GAn and one ATTn), showed length variation among these accessions. Polymorphism was also very limited between Lycopersicon esculentum and L. pennelli, two distant species. Southern analysis using the seventeen oligonucleotide probes identified GATAn and GAAAn as useful motifs for the detection of multiple polymorphic fragments among tomato cultivars. To determine the structure of microsatellite loci, a GAn probe was used for hybridization at low stringency on a small insert genomic library, and randomly selected clones were analyzed. GAn based motifs of increasing complexity were found, indicating that simple dinucleotide sequences may have evolved into larger tandem repeats such as minisatellites as a result of basepair substitution, replication slippage, and possibly unequal crossing-over. Finally, we genetically mapped loci corresponding to two amplified microsatellites, as well as nine large hypervariable fragments detected by Southern hybridization with a GATA8 probe. All loci are located around putative tomato centromeres. This may contribute to understanding of the structure of centromeric regions in tomato.

Base Sequence↗

PubMed1995

Molecular genetic analysis of the ripening-inhibitor and non-ripening loci of tomato: a first step in genetic map-based cloning of fruit ripening genes.

Ripening represents a complex developmental process unique to plants. We are using tomato fruit ripening mutants as tools to understand the regulatory components that control and coordinate the physiological and biochemical changes which collectively confer the ripe phenotype. We have genetically characterized two loci which result in significant inhibition of the ripening process in tomato, ripening-inhibitor (rin), and non-ripening (nor), as a first step toward isolating genes likely to encode key regulators of this developmental process. A combination of pooled-sample mapping as well as classical restriction fragment length polymorphism (RFLP) analysis has permitted the construction of high-density genetic maps for the regions of chromosomes 5 and 10 spanning the rin and nor loci, respectively. To assess the feasibility of initiating a chromosome walk, physical mapping of high molecular weight genomic DNA has been employed to estimate the relationship between physical distance (in kb) and genetic distance (in cM) around the targeted loci. Based on this analysis, the relationship in the region spanning the rin locus is estimated to be 200-300 kb/cM, while the nor locus region ratio is approximately 200 kb/1 cM. Using RFLP markers tightly linked to rin and nor, chromosome walks have been initiated to both loci in a yeast artificial chromosome (YAC) library of tomato genomic DNA. We have isolated and characterized several YAC clones linked to each of the targeted ripening loci and present genetic evidence that at least one YAC clone contains the nor locus.

Base Sequence↗

PubMed1995

Abundance, variability and chromosomal location of microsatellites in wheat.

The potential of microsatellite sequences as genetic markers in hexaploid wheat (Triticum aestivum) was investigated with respect to their abundance, variability, chromosomal location and usefulness in related species. By screening a lambda phage library, the total number of (GA)n blocks was estimated to be 3.6 x 10(4) and the number of (GT)n blocks to be 2.3 x 10(4) per haploid wheat genome. This results in an average distance of approximately 270 kb between these two microsatellite types combined. Based on sequence analysis data from 70 isolated microsatellites, it was found that wheat microsatellites are relatively long containing up to 40 dinucleotide repeats. Of the tested primer pairs, 36% resulted in fragments with a size corresponding to the expected length of the sequenced microsatellite clone. The variability of 15 microsatellite markers was investigated on 18 wheat accessions. Significantly, more variation was detected with the microsatellite markers than with RFLP markers with, on average, 4.6 different alleles per microsatellite. The 15 PCR-amplified microsatellites were further localized on chromosome arms using cytogenetic stocks of Chinese Spring. Finally, the primers for the 15 wheat microsatellites were used for PCR amplification with rye (Secale cereale) and barley accessions (Hordeum vulgare, H. spontaneum). Amplified fragments were observed for ten primer pairs with barley DNA and for nine primer pairs with rye DNA as template. A microsatellite was found by dot blot analysis in the PCR products of barley and rye DNA for only one primer pair.

Base Sequence↗

PubMed1995

Chromosome landing: a paradigm for map-based gene cloning in plants with large genomes.

The original concept behind map-based or positional cloning was to find a DNA marker linked to a gene of interest, and then to 'walk' to the gene via overlapping clones (e.g. cosmids or YACs). While chromosome walking is straightforward in organisms with small genomes, it is difficult to apply in most plant species, which typically have large, complex genomes. The strategy of chromosome walking is based on the assumption that it is difficult and time consuming to find DNA markers that are physically close to a gene of interest. Recent technological developments invalidate this assumption for many species. As a result, the mapping paradigm has now changed such that one first isolates one or more DNA marker(s) at a physical distance from the targeted gene that is less than the average insert size of the genomic library being used for clone isolation. The DNA marker is then used to screen the library and isolate (or 'land' on) the clone containing the gene, without any need for chromosome walking and its associated problems. Chromosome landing, together with the technology that has made it possible, is likely to become the main strategy by which map-based cloning is applied to isolate both major genes and genes underlying quantitative traits in plant species.

Chromosome Mapping↗

PubMed1995

Dominance is the major genetic basis of heterosis in rice as revealed by QTL analysis using molecular markers.

A set of 194 F7 lines derived from a subspecific rice cross showing strong F1 heterosis was backcrossed to the two parents. The materials (388 BC1F7 lines, 194 F8 lines, two parents, F1) were phenotyped for 12 quantitative traits. A total of 37 significant QTLs (LOD > or = 2.0) was detected through 141 RFLP markers in the BC1F7 populations. Twenty-seven (73%) quantitative trait loci (QTLs) were detected in only one of the BC1F7 populations. In 82% of these cases, the heterozygotes were superior to the respective homozygotes. The remaining 10 (27%) QTLs were detected in both BC1F7 populations, and the heterozygote had a phenotype falling between those of the two homozygotes and in no instances were the heterozygotes found to be superior to both homozygotes. These results suggest that dominance complementation is the major genetic basis of heterosis in rice. This conclusion was strengthened by the finding that there was no correlation between most traits and overall genome heterozygosity and that there were some recombinant inbred lines in the F8 population having phenotypic values superior to the F1 for all of the traits evaluated--a result not expected if overdominance was a major contributor to heterosis. Digenic epistasis was not evident.

Genes, Dominant↗

PubMed1995

The tomato Never-ripe locus regulates ethylene-inducible gene expression and is linked to a homolog of the Arabidopsis ETR1 gene.

Fruit ripening represents a complex system of genetic and hormonal regulation of eukaryotic development unique to plants. We are using tomato ripening mutants as tools to elucidate genetic components of ripening regulation and have recently demonstrated that the Never-ripe (Nr) mutant is insensitive to the plant growth regulator ethylene (M.B. Lanahan, H.-C. Yen, J.J. Giovannoni, H.J. Klee [1994] Plant Cell 6:521-530). We report here ethylene sensitivity over a range of concentrations in normal and Nr tomato seedlings and show that the Nr mutant retains residual sensitivity to as little as 1 part per million of ethylene. Analysis of ripening-related gene expression in normal and mutant ethylene-treated fruit demonstrates that Nr exerts its influence on development at least in part at the level of ethylene-inducible gene expression. We have additionally used cloned tomato and Arabidopsis sequences known to influence ethylene perception as restriction fragment length polymorphism probes, and have identified a tomato locus linked to Nr that hybridizes to the Arabidopsis ETR1 gene at low stringency, suggesting the possibility that Nr may be homologous to ETR1.

Arabidopsis↗

PubMed1995

Pulsed-field gel analysis of 5S and satellite DNA in barley.

Pulsed-field gel electrophoresis was used to study the variability of clustered tandemly repeated sequences in barley. Twelve spring barley cultivars were investigated with a heterologous 5S DNA probe and the 118 base pair barley satellite DNA probe HVT01. On a per fragment basis, the 5S probe was 5 times and the barley satellite probe 6.7 times more variable than single- or low-copy RFLP markers, demonstrating their usefulness for cultivar distinction.

Base Sequence↗

PubMed1994

Map-based cloning in crop plants: tomato as a model system II. Isolation and characterization of a set of overlapping yeast artificial chromosomes encompassing the jointless locus.

A map-based cloning technique for crop plants is being developed using tomato as a model system. The target gene jointless is a recessive mutation that completely suppresses the formation of flower and fruit pedicel abscission zones. Previously, the jointless locus was mapped to a 3 cM interval between the two molecular markers TG523 and RPD158. Physical mapping of the jointless region by pulsed-field gel electrophoresis demonstrated that TG523 and RPD158 reside on a 600 kb SmaI fragment. In this study, TG523 was used as a probe to screen a tomato yeast artificial chromosome (YAC) library. Six tomato YAC (TY) clones were isolated, ranging from 220 to 380 kb in size. Genetic mapping of YAC ends demonstrated that this set of overlapping YACs encompasses the jointless locus. Two YAC ends, TY159L (L indicates left end) and TY143R (R indicates right end), cosegregate with the jointless locus. Only one of the six YACs (TY142) contained single-copy DNA sequences at both ends that could be mapped. The two ends of TY142 were mapped to either side of the jointless locus, indicating that TY142 contains a contiguous 285 kb tomato DNA fragment that probably includes the jointless locus. Physical mapping of the TY142 clone revealed that TY159L and TY143R reside on a 55 kb SalI fragment. Southern blot hybridization analysis of the DNAs of tomato lines nearly isogenic for the jointless mutation has allowed localization of the target locus to a region of less than 50 kb within the TY142 clone.

Base Sequence↗

PubMed1994

Map-based cloning in crop plants. Tomato as a model system: I. Genetic and physical mapping of jointless.

A map-based cloning scheme is being used to isolate the jointless (j) gene of tomato. The jointless locus is defined by a single recessive mutation that completely suppresses the formation of the fruit and flower pedicel and peduncle abscission zone jointless was mapped in an F2 population of an interspecific cross between Lycopersicon esculentum and Lycopersicon pennellii to a 7.1 cM interval between two restriction fragment length polymorphism (RFLP) markers TG523 and TG194. Isogenic DNA pools were then constructed from a subset of the mapping population and screened with 800 random decamers for random amplification of polymorphic DNA (RAPD) polymorphisms. Five new RAPD markers were isolated and mapped to chromosome 11, two of which were mapped within the targeted interval. One marker, RPD158, was mapped 1.5 cM to the opposite side of jointless relative to TG523 and thus narrowed the interval between the closest flanking markers to 3.0 cM. Physical mapping by pulse-field gel electrophoresis using TG523 and RPD158 as probes demonstrated that both markers hybridize to a common 600 kb SmaI restriction fragment. This provided an estimate of 200 kb/cM for the relationship between physical and genetic distances in the region of chromosome 11 containing the j locus. The combined results provide evidence for the feasibility of the next step toward isolation of the jointless gene by map-based cloning--a chromosome walk or jump to jointless.

Base Sequence↗

PubMed1994

Chromosome 2-specific DNA clones from flow-sorted chromosomes of tomato.

We obtained DNA clones specific to tomato chromosome 2 from a small number of chromosomes collected by flow sorting. Suspensions of metaphase chromosomes were prepared from 3-month-old tomato cell cultures of Lycopersicon pennellii. Isolated chromosomes stained with chromomycin A3 and Hoechst 33258 were analyzed on an EPICS 753 flow cytometer using a UV laser to excite Hoechst fluorescence and a 458 nm laser to excite chromomycin A3 fluorescence. Chromosomes from well-resolved peaks on a bivariate flow karyotype were sorted directly onto membrane filters for spot-blot analysis. The filters were processed and hybridized with chromosome-specific repetitive DNA probes. In this way tomato chromosome 1 and chromosome 2 were assigned to peaks in the bivariate flow karyotypes. One thousand copies of the putative chromosome 2 were flow-sorted directly into microfuge tubes. DNA specific to chromosome 2 was amplified by a polymerase chain reaction (PCR) technique using universal 22mer degenerate oligonucleotide primers (DOP) sequences. DOP-PCR yields a smear of fragments of various sizes from 250 to 1600 bp. Amplified products were cloned into the Bluescript plasmid vector. Approximately 11% of the clones contained sequences with highly repetitive elements, and 85% contained only low-copy-number sequences. Eleven clones containing low-copy-number sequences that detect restriction fragment length polymorphisms were placed on the molecular linkage map of tomato. All showed linkage to chromosome 2.

Amino Acid Sequence↗