Search PubMed⌕ Search

Biomedical subjects

S Bron

Publications and source records attributed to S Bron.

At least 37 records · Page 2Linked to original sources

Functional analysis of the secretory precursor processing machinery of Bacillus subtilis: identification of a eubacterial homolog of archaeal and eukaryotic signal peptidases.

Approximately 47% of the genes of the Gram-positive bacterium Bacillus subtilis belong to paralogous gene families. The present studies were aimed at the functional analysis of the sip gene family of B. subtilis, consisting of five chromosomal genes, denoted sipS, sipT, sipU, sipV, and sipW. All five sip genes specify type I signal peptidases (SPases), which are actively involved in the processing of secretory preproteins. Interestingly, strains lacking as many as four of these SPases could be obtained. As shown with a temperature-sensitive SipS variant, only cells lacking both SipS and SipT were not viable, which may be caused by jamming of the secretion machinery with secretory preproteins. Thus, SipS and SipT are of major importance for protein secretion. This conclusion is underscored by the observation that only the transcription of the sipS and sipT genes is temporally controlled via the DegS-DegU regulatory system, in concert with the transcription of most genes for secretory preproteins. Notably, the newly identified SPase SipW is highly similar to SPases from archaea and the ER membrane of eukaryotes, suggesting that these enzymes form a subfamily of the type I SPases, which is conserved in the three domains of life.

Amino Acid Sequence↗

Characterization of yhcN, a new forespore-specific gene of Bacillus subtilis.

A new Bacillus subtilis sporulation-specific gene, yhcN, has been identified, the expression of which is dependent on the forespore-specific sigma factor sigmaG and to a much lesser extent on sigmaF. A translational yhcN-lacZ fusion is expressed at a very high level in the forespore, and the protein encoded by yhcN was detected in the inner spore membrane. A yhcN mutant sporulates normally and yhcN spores have identical resistance properties to wild-type spores. However, the outgrowth of yhcN spores is slower than that of wild-type spores.

Amino Acid Sequence↗

Sequence specificity of illegitimate plasmid recombination in Bacillus subtilis: possible recognition sites for DNA topoisomerase I.

Previous work in our group indicated that structural plasmid instability in Bacillus subtilis is often caused by illegitimate recombination between non-repeated sequences, characterized by a relatively high AT content. Recently we developed a positive selection vector for analysis of plasmid recombination events in B. subtilis which enables measurement of recombination frequencies without interference of selective growth differences of cells carrying wild-type or deleted plasmids. Here we have used this system to further analyse the sequence specificity of illegitimate plasmid recombination events and to assess the role of the host-encoded DNA topoisomerase I enzyme in this process. Several lines of evidence suggest that single-strand DNA nicks introduced by DNA topoisomerase I are a major source of plasmid deletions in pGP100. First, strains overproducing DNA topoisomerase I showed increased levels of plasmid deletion. Second, these deletions occurred predominantly (>90% of the recombinants) between non-repeated DNA sequences, the majority of which resemble potential DNA topoisomerase I target sites. Sequence alignment of 66 deletion end-points confirmed the previously reported high AT content and, most importantly, revealed a highly conserved C residue at position -4 relative to the site of cleavage at both deletion termini. Based on these genetic data we propose the following putative consensus cleavage site for DNA topoisomerase I of B.subtilis: 5'-A/TCATA/TTAA/TA/TA-3'.

Bacillus subtilis↗

Rolling-circle plasmids from Bacillus subtilis: complete nucleotide sequences and analyses of genes of pTA1015, pTA1040, pTA1050 and pTA1060, and comparisons with related plasmids from gram-positive bacteria.

Most small plasmids of Gram-positive bacteria use the rolling-circle mechanism of replication and several of these have been studied in considerable detail at the DNA level and for the function of their genes. Although most of the common laboratory Bacillus subtilis 168 strains do not contain plasmids, several industrial strains and natural soil isolates do contain rolling-circle replicating (RCR) plasmids. So far, knowledge about these plasmids was mainly limited to: (i) a classification into seven groups, based on size and restriction patterns; and (ii) DNA sequences of the replication region of a limited number of them. To increase the knowledge, also with respect to other functions specified by these plasmids, we have determined the complete DNA sequence of four plasmids, representing different groups, and performed computer-assisted and experimental analyses on the possible function of their genes. The plasmids analyzed are pTA1015 (5.8 kbp), pTA1040 (7.8 kbp), pTA1050 (8.4 kbp), and pTA1060 (8.7 kbp). These plasmids have a structural organization similar to most other known RCR plasmids. They contain highly related replication functions, both for leading and lagging strand synthesis. pTA1015 and pTA1060 contain a mobilization gene enabling their conjugative transfer. Strikingly, in addition to the conserved replication modules, these plasmids contain unique module(s) with genes which are not present on known RCR plasmids of other Gram-positive bacteria. Examples are genes encoding a type I signal peptidase and genes encoding proteins belonging to the family of response regulator aspartate phosphatases. The latter are likely to be involved in the regulation of post-exponential phase processes. The presence of these modules on plasmids may reflect an adaptation to the special conditions to which the host cells were exposed.

Bacillus subtilis↗

The Sip(Sli) gene of Streptomyces lividans TK24 specifies an unusual signal peptidase with a putative C-terminal transmembrane anchor.

Type I signal peptidases (SPases) are a widespread family of enzymes which remove signal peptides from proteins translocated across cellular membranes. Here, we report the first isolation of a gene coding for type I signal peptidase of Streptomyces, denoted Sip(Sli). The sip(sli) gene specifies a protein of 291 amino acids. Thus Sip(Sli) is much larger (approximately 100 amino acids) than other known SPases of Gram-positive bacteria and resembles SPases of Gram-negative bacteria, showing the highest degree of similarity to an SPase of the cyanobacterium Phormidium laminosum. Sip(Sli) contains conserved serine and lysine residues, which are believed to be required for the catalytic activity. Similar to other known SPases from Gram-positive bacteria, Sip(Sli) seems to have only one N-terminal transmembrane anchor. In addition, Sip(Sli) seems to contain a second transmembrane anchor at the C-terminus, which is an unusual feature for type I signal peptidases.

Amino Acid Sequence↗

The complete genome sequence of the gram-positive bacterium Bacillus subtilis.

Bacillus subtilis is the best-characterized member of the Gram-positive bacteria. Its genome of 4,214,810 base pairs comprises 4,100 protein-coding genes. Of these protein-coding genes, 53% are represented once, while a quarter of the genome corresponds to several gene families that have been greatly expanded by gene duplication, the largest family containing 77 putative ATP-binding transport proteins. In addition, a large proportion of the genetic capacity is devoted to the utilization of a variety of carbon sources, including many plant-derived molecules. The identification of five signal peptidase genes, as well as several genes for components of the secretion apparatus, is important given the capacity of Bacillus strains to secrete large amounts of industrially important enzymes. Many of the genes are involved in the synthesis of secondary metabolites, including antibiotics, that are more typically associated with Streptomyces species. The genome contains at least ten prophages or remnants of prophages, indicating that bacteriophage infection has played an important evolutionary role in horizontal gene transfer, in particular in the propagation of bacterial pathogenesis.

Bacillus subtilis↗

Bacillus subtilis contains four closely related type I signal peptidases with overlapping substrate specificities. Constitutive and temporally controlled expression of different sip genes.

Most biological membranes contain one or two type I signal peptidases for the removal of signal peptides from secretory precursor proteins. In this respect, the Gram-positive bacterium Bacillus subtilis seems to be exceptional, because it contains at least four chromosomally-encoded type I signal peptidases, denoted SipS, SipT, SipU, and SipV. Here, we report the identification of the sipT and sipV genes, and the functional characterization of SipT, SipU, and SipV. The four signal peptidases have similar substrate specificities, as they can all process the same beta-lactamase precursor. Nevertheless, they seem to prefer different pre-proteins, as indicated by studies on the processing of the pre-alpha-amylase of Bacillus amyloliquefaciens in strains lacking SipS, SipT, SipU, or SipV. The sipU and sipV genes are constitutively transcribed at a low level, suggesting that they are required for processing of (pre-)proteins secreted during all growth phases. In contrast, the transcription of sipS and sipT is temporally controlled, in concert with the expression of the genes for most secretory proteins, which suggests that SipS and SipT serve to increase the secretory capacity of B. subtilis. Taken together, our findings suggest that SipS, SipT, SipU, and SipV serve different functions during the exponential and post-exponential growth phase of B. subtilis.

Amino Acid Sequence↗

The chemistry and enzymology of the type I signal peptidases.

The discovery that proteins exported from the cytoplasm are typically synthesized as larger precursors with cleavable signal peptides has focused interest on the peptidases that remove the signal peptides. Here, we review the membrane-bound peptidases dedicated to the processing of protein precursors that are found in the plasma membrane of prokaryotes and the endoplasmic reticulum, the mitochondrial inner membrane, and the chloroplast thylakoidal membrane of eukaryotes. These peptidases are termed type I signal (or leader) peptidases. They share the unusual feature of being resistant to the general inhibitors of the four well-characterized peptidase classes. The eukaryotic and prokaryotic signal peptidases appear to belong to a single peptidase family. This review emphasizes the evolutionary concepts, current knowledge of the catalytic mechanism, and substrate specificity requirements of the signal peptidases.

Bacterial Proteins↗

Role of enzymes of homologous recombination in illegitimate plasmid recombination in Bacillus subtilis.

The structural stability of plasmid pGP1, which encodes a fusion between the penicillinase gene (penP) of Bacillus licheniformis and the Escherichia coli lacZ gene, was investigated in Bacillus subtilis strains expressing mutated subunits of the ATP-dependent nuclease, AddAB, and strains lacking the major recombination enzyme, RecA. Strains carrying a mutation in the ATP-binding site of the AddB subunit exhibited high levels of plasmid instability, whereas a comparable mutation in the A subunit did not affect plasmid stability. Using an alternative plasmid system, pGP100, we were able to demonstrate that the differences in stability reflected differences in initial recombination frequencies. Based on a comparison of endpoint sequences observed in the various hosts, we speculate that at least two different mechanisms underlie the deletion events involved, the first (type I) occurring between nonrepeated sequences, and the second (type II) occurring between short direct repeats (DRs). The latter event was independent of single-strand replication intermediates and the mode of replication and possibly requires the introduction of double-strand breaks (DSBs) between the repeats. In the absence of functional AddAB complex, or the AddB subunit, DSBs are likely to be processed via a recA-independent mechanism, resulting in intramolecular recombination between the DRs. In wild-type cells, such DSBs are supposed to be either repaired by a mechanism involving AddAB-dependent recombination or degraded by the AddAB-associated exonuclease activity. Plasmid stability assays in a recA mutant showed that (i) the level of deletion formation was considerably higher in this host and (ii) that deletions between short DRs occurred at higher frequencies than those described previously for the parental strain. We propose that in wild-type cells, the recA gene product is involved in recombinational repair of DSBs.

Adenosine Triphosphate↗

Cloning of heterologous genes specifying detrimental proteins on pUC-derived plasmids in Escherichia coli.

A system is described that enables the cloning of genes specifying detrimental proteins in Escherichia coli. The system is based on pUC plasmids and was developed for the expression of the Bacillus subtilis csaA gene, which is lethal when expressed at high levels. Suppressor strains that tolerate the presence of plasmids for high-level expression of csaA were isolated, which contained small cryptic deletion variants of the parental plasmid in high copy numbers. The cryptic plasmids consisted mainly of the pUC replication functions and lacked the csaA region and selectable markers. The co-resident, incompatible, cryptic plasmids enabled the maintenance of the csaA plasmids by reducing their copy number 20-fold, which resulted in a concomitant 3- to 7-fold reduction in the expression of plasmid-encoded genes. Strains carrying these cryptic endogenous plasmids proved to be useful for the construction of pUC-based recombinant plasmids carrying other genes, such as the skc gene of Streptococcus equisimilis, which cannot be cloned in high copy numbers in E. coli. Several strategies to reduce production levels of heterologous proteins specified by plasmids are compared.

Bacterial Outer Membrane Proteins↗

A positive selection vector for the analysis of structural plasmid instability in Bacillus subtilis.

A system for the positive selection of structural plasmid rearrangements in Bacillus subtilis was developed. Random deletions removing a transcription terminator structure in the assay plasmid, designated pGP100, resulted in expression of the cat-86 gene, under control of a constitutive bacteriophage promoter. The resulting chlorampenicol-resistant colonies were analyzed for plasmid contents and were shown, by restriction analysis, to contain initially both the intact parental plasmid and a deletion variant. Sequence analysis of deletion derivatives revealed a consensus target site (5'-A-T-T-A-A/T-3') at or near deletion termini, which resembles topoisomerase I target sites. Endpoints on one side of the deletions were found to be clustered in the promoter region of the tetracycline resistance gene present on pGP100, the gene product of which is an integral membrane protein. Furthermore, deletion of the genes encoding the ATP-dependent exonuclease, AddAB, severely reduced the structural stability of pGP100. The data indicate that similar mechanisms underlie deletion formation in pGP100, and a different plasmid-based system, pGP1, which we have analyzed previously.

Bacillus subtilis↗

Molecular analysis of the replication origin of the Lactococcus lactis plasmid pCJ305.

The replication origin region, ori, of the Lactococcus lactis subsp. lactis plasmid pCI305 contains three-and-one-half directly repeated 22-bp sequences and two inverted repeat sequences, IR1 and IR2. These inverted repeat sequences overlap the promoter of the repB gene, which encodes a protein (RepB) essential for plasmid replication. Gel retardation assays, using lactococcal crude cell extracts in which RepB was overproduced, were used to demonstrate that the replication protein interacts with DNA sequences within the origin region. IR1 was identified as a RepB binding site. The -35 region of the repB promoter is contained within the loop of the potential stem-loop structure of IR1, suggesting autoregulation of repB. The pCI305 RepB failed to interact with DNA sequences within the minimal replicons of nine other members of the pCI305 family of plasmids and it was concluded that this DNA-protein interaction was replicon specific. In vivo studies were performed to determine the role of the three-and-one-half copies of the 22-bp sequences. When this sequence was provided in trans on a compatible vector, it resulted in the loss of pCI305 from the cell population (incompatibility).

Bacterial Proteins↗

Bacillus subtilis can modulate its capacity and specificity for protein secretion through temporally controlled expression of the sipS gene for signal peptidase I.

Bacillus subtilis contains three chromosomally encoded type I signal peptidases (SipS, SipT and SipU), which remove signal peptides from secretory precursor proteins. In the present study the biological function of SipS and the regulation of its synthesis were analysed. Unlike the type I signal peptidase of Escherichia coli, SipS was essential neither for protein secretion nor viability of the cell. However, in the absence of SipS the rate of processing of several preproteins was reduced, and four of the seven major secreted proteins of B. subtilis were hardly detectable in the growth medium. Surprisingly, the processing of Bacillus amyloliquefaciens alpha-amylase and the secretion of at least two endogenous B. subtilis proteins was improved in the absence of SipS. These findings indicate that the substrate preference of SipS differs from that of SipT and SipU, and that SipS is an important factor determining the efficiency of protein secretion in B. subtilis. SipS is transcribed in a growth phase- and medium-dependent manner. In minimal medium, the growth phase-dependent transcription of sipS is controlled by the DegS-DegU two-component regulatory system, indicating that the expression of sipS is regulated by the same factors that control the expression of most genes for secreted degradative enzymes. Our observations suggest that B. subtilis can modulate its capacity and specificity for protein secretion through the controlled expression of sipS.

Bacillus subtilis↗

A 22 kb DNA sequence in the cspB-glpPFKD region at 75 degrees on the Bacillus subtilis chromosome.

A 21808 bp nucleotide sequence at 75 degrees on the genetic map of the Bacillus subtilis chromosome was determined. The sequence of this region is adjacent to the glpPFKD operon involved in glycerol utilization. Twenty-six ORFs were identified, one of which corresponds to the cspB gene, encoding a cold-shock protein. Seventeen of the deduced protein sequences of these ORFs displayed significant homology to known proteins in the data banks. One putative operon was identified, consisting of five ORFs, that is probably involved in the uptake and processing of copper. The location of cspB in this sequence does not confirm the genetic mapping data, indicating that the gene is closely linked to comK, which is located at 80 degrees on the B. subtilis chromosome.

Bacillus subtilis↗

Identification and characterization of a novel type of replication terminator with bidirectional activity on the Bacillus subtilis theta plasmid pLS20.

We have sequenced and analysed a 3.1 kb fragment of the 55 kb endogenous Bacillus subtilis plasmid pLS20 containing its replication functions. Just outside the region required for autonomous replication, a segment of 18 bp was identified as being almost identical to part of the major B. subtilis chromosomal replication terminator. Here, we demonstrate that this segment is part of a functional replication terminator. This newly identified element, designated TerLS20, is the first replication terminator identified on a theta plasmid from a Gram-positive bacterium. TerLS20 is distinct from other known replication terminators in the sense that it is functional in both orientations. The region required for bipolar functionality of TerLS20 was delineated to a sequence of 29 bp, which is characterized by an imperfect dyad symmetry.

Bacillus subtilis↗

The expression of a plasmid-specified exported protein causes structural plasmid instability in Bacillus subtilis.

The rolling-circle plasmid pGP1 was used to study the effects of the expression of a plasmid-specified exported protein on structural plasmid stability in Bacillus subtilis. pGP1 contains a fusion between the Bacillus licheniformis penP gene, encoding a C-terminally truncated penicillinase, and the Escherichia coli beta-galactosidase (lacZ) gene. Two processes affected the accumulation of pGP1 variants with deletions in the penP-lacZ region. First, divergent transcription from genes upstream of penP-lacZ increased pGP1 deletion frequencies up to about 10-fold. Second, the removal of the PenP signal peptide resulted in completely stable plasmids, indicating that the entry of the PenP fragment into the protein export pathway is an important factor in the instability of pGP1. On the basis of these results, we propose a model in which the temporary anchoring of the plasmid to the membrane through the cotranscriptional and cotranslational entry of PenP into the protein export pathway creates domains of local hypersupercoiling, which we assume to be targets for deletion formation.

Amino Acid Sequence↗

Structural and functional analysis of the single-strand origin of replication from the lactococcal plasmid pWV01.

The single-strand origin (SSO) of the rolling-circle (RC), broad-host-range lactococcal plasmid pWVO1 was functionally characterized. The activity of this SSO in the conversion of single-stranded DNA to double-stranded DNA was tested both in vivo and in vitro. In addition, the effect of this SSO on plasmid maintenance was determined. The functional pWVO1 SSO comprises a 250 bp region, containing two inverted repeats (IRs). The activity of each IR was tested, separately and in combination, in a plasmid derivative that was otherwise completely devoid of structures that might function as SSO. One of the IRs (IR I) showed some homology with other previously described SSOs of the SSOA type, as well as with the conversion signal of the Escherichia coli phage phi X174. This IR was shown to have a partial, RNA polymerase-independent activity in complementary strand synthesis, both in vivo and in vitro. The second IR, which had no activity of its own, was required for full SSO activity, both in vivo and in vitro. The conversion of single-stranded DNA to the double-stranded form by the complete SSO was only partly sensitive to inhibition by rifampicin, indicating the existence of an RNA polymerase-independent pathway for this event. The results suggest that the pWVO1 SSO can be activated by two different routes: an RNA polymerase-dependent one (requiring the entire SSO), and an RNA polymerase-independent one (requiring only IR I).

Bacteriophage M13↗

Overproduction of the ATP-dependent nuclease AddAB improves the structural stability of a model plasmid system in Bacillus subtilis.

The effect of the ATP-dependent exonuclease AddAB complex on the structural stability of plasmid pGP1 in Bacillus subtilis was studied. Using deletion mutagenesis and gene amplification techniques, B. subtilis strains were constructed either lacking or overproducing the AddAB complex, a key enzyme in homologous recombination. The deletion mutant possessed no residual ATP-dependent nuclease activity; in contrast, the nuclease activity was up to 30 times higher in lysates of strains carrying multiple copies of the addAB genes in the chromosome. Southern blot analyses of these strains indicated that a linear relationship exists between the number of chromosomal gene copies and the level of AddAB activity. The structural stability of pGP1 was analyzed in the AddAB-deficient and over-producing backgrounds. Frequencies of deletion formation in the plasmid, as monitored by the expression of the pGP1-encoded penP-lacZ fusion on media containing X-gal, were shown to be increased at least 25-fold in the addAB knock-out mutant, whereas the stability of pGP1 was improved up to 15-fold in strains overproducing the AddAB enzyme. A possible explanation for these findings is that interactions between AddAB and plasmid molecules prevent the formation of secondary structures that constitute potential deletion target sites, and thereby enhance the structural stability of plasmids.

Bacillus subtilis↗