Search PubMed⌕ Search

Biomedical subjects

S Braun

Publications and source records attributed to S Braun.

At least 145 records · Page 8Linked to original sources

Antitumor activity and immunotherapeutic properties of Flt3-ligand in a murine breast cancer model.

Flt3-Ligand (Flt3-L) is a stimulatory cytokine for a variety of hematopoietic lineages, including dendritic cells and B cells. The antitumor properties of Flt3-L were evaluated in C3H/HeN mice challenged with the syngeneic C3L5 murine breast cancer cell line. Eighty % of animals receiving 500 microg/kg/day of Chinese hamster ovary-derived human Flt3-L for 10 days were protected from tumor growth, whether the tumor challenge was administered on the first or fourth days of Flt3-L administration. The protection provided by soluble Flt3-L was transient. All tumor-free animals rechallenged 4 weeks after the primary challenge developed tumor. Transduction of C3L5 with retroviral vectors expressing human or murine Flt3-L did not influence in vitro growth or MHC expression but decreased in vivo tumor development to 0 and 10% of mice, respectively. This compares with tumor growth of 52% with interleukin-2 transduced C3L5 and over 85% with untransduced and control vector-transduced C3L5. Unlike animals treated with soluble Flt3-L, administration of Flt3-L as a tumor vaccine protected mice from a subsequent challenge with untransduced C3L5 in 60-78% of mice, compared to 0% of controls. Our initial work used the most common Flt3-L isoform, which is membrane bound but can undergo proteolytic cleavage to generate a soluble form. To evaluate the role of the various Flt3-L isoforms in preventing tumor formation, retroviral vectors encoding only the membrane-bound form or only the soluble isoform were evaluated in the C3L5 model. Tumor formation was similar with either isoform, preventing tumor formation in 80-90% of mice after the primary challenge and 88-89% after the secondary challenge. Splenocytes obtained 4 weeks after the secondary challenge conferred adoptive immunity to naive mice in 60% of animals. This initial report of antitumor activity by Flt3-L is consistent with its known stimulatory effect on antigen-presenting cells and suggests it may enhance the development of tumor vaccines.

Adoptive Transfer↗

[Hollow foot in adults].

Contrary to the general impression, the hollow foot is much more common than the flat foot. We distinguish three categories of hollow foot: varus hollow (clinical form I), valgus hollow (clinical form II), and pseudo-hollow (clinical form III). These three clinical forms have a common deviation dynamics, the consequence of shortening of the sural-Achilles-calcaneoplantar system. Metatarsalgia often precedes deformation of the front of the foot. Talalgia is linked to excess traction or to a conflict between the heel and the back of the shoe. Common therapy consists of plantar orthoses, eventually toe orthoses and orthopedic shoes. When surgery is used in the adult, it is generally not to correct excess cavus but to correct problems of the front of the foot such as hallux valgus, involvement of the second metatarsal bone (??), or toenails.

Adult↗

Degeneration of cocultures of spinal muscular atrophy muscle cells and rat spinal cord explants is not due to secreted factors and cannot be prevented by neurotrophins.

We have shown recently that cocultures of muscle cells from infantile spinal muscular atrophy (SMA) patients innervated by motoneurons of normal rat spinal cord explants undergo a degeneration process, suggesting that muscle may play a role in this atrophy, which previously has been considered to be a pure motoneuron disease. Conditional media of SMA cocultures did not affect control healthy nerve muscle cocultures. Conversely, conditioned media of control cocultures were unable to prevent degeneration of SMA cocultures. Moreover, neurotrophic factors, thought to be of help in motoneuron disease treatment, did not protect SMA cocultures from premature death. Our results suggest that the abnormal phenotype observed in nerve-muscle coculture (1) is not due to the release of a toxic factor nor to the lack of a secreted survival factor, and (2) does not respond to neurotrophin treatment.

Animals↗

Purification and characterization of human sarcomeric mitochondrial creatine kinase.

In order to set the basis for detailed clinical investigations, mitochondrial creatine kinase (Mi-CK) was purified to homogeneity from human cardiac muscle. Biophysical characterization by SDS-PAGE, gel permeation chromatography and by electron microscopy of negatively stained single molecules demonstrated that, similar to other vertebrate Mi-CKs, human sarcomeric Mi-CK occurs in two different oligomeric forms, dimers and octamers, that are readily interconvertible. The apparent MTs of Mi-CK protomers, dimers and octamers were 43,600 +/- 800, 79,700 +/- 800 and 371,000 +/- 3000, respectively. In addition, isoelectric focussing proved to be a suitable technique for routinely distinguishing Mi-CK from cytosolic MM-CK and gave pl values of 8.30 +/- 0.04 and 7.44 +/- 0.04 for octameric and dimeric human sarcomeric Mi-CK. Circumstantial evidence suggests that both the highly symmetrical structure and the high pI value of Mi-CK octamers are crucial determinants for the physiological functions of this enzyme.

Creatine Kinase↗

Synthesis of isopropyl-1-thio-beta-D-glucopyranoside (IPTGlc), an inducer of Aspergillus niger B1 beta-glucosidase production.

Production of beta-glucosidase in Aspergillus niger B1 is subjected to catabolic repression by glucose. Aspergillus niger B1 grown on bran as a carbon source secreted beta-glucosidase. The maximum level of the enzyme was reached after 7 d of fermentation. Addition of 1% glucose to the medium suppressed beta-glucosidase production to undetectable levels. In this study, the organic synthesis of a potential inducer of beta-glucosidase production by A. niger B1's reported. Isopropyl-1-thio-beta-D-glucopyranoside (IPTGlc) was synthesized using a two-step organic synthesis protocol. The H-NMR data agreed with those reported previously for the galactoside analog. When IPTGlc was added 24 h after inoculation at a final concentration of 0.4 mM, similar levels of beta-glucosidase were reached 3 to 4 d earlier as compared to fermentation without IPTGlc induction. In practice, this may translate to a more efficient method of producing beta-glucosidase from this fungus.

Aspergillus niger↗

Influence of experience on the representation of the "mothering call" in frontoparietal and auditory cortex of pups of the rodent Octodon degus: FDG mapping.

Several types and subtypes of vocalizations which have a behavioral impact on degu pups were identified. Among these the complex "mothering call" which is exclusively uttered by females and first during extensive nursing periods in the nest is a candidate for filial learning. In 14C-2-fluoro-2-deoxyglucose (FDG) experiments two-weeks-old pups raised by normal mothers showed higher metabolic activity in somatosensory frontoparietal and frontal cortex upon play back of a mothering call than pups raised by muted mothers. It is suggested that pups learn to associate the mothering call with close body contact with their mother early in life. In addition, FDG representation of the call, of its components and of tone and noise stimuli were studied in degu auditory cortex. Five fields and some aspects of tonotopic organization were identified. The mothering call activated all fields, but with more spatial extent of labeling in normally raised pups. A rostral field was activated by play-back of the mothering call, noise, and two-tone sequences, but hardly by single-frequency tones and the narrow-band component of the mothering call.

Acoustic Stimulation↗

Interrater agreement and stability of the Functional Independence Measure for Children (WeeFIM): use in children with developmental disabilities.

OBJECTIVE: Examination of the interrater agreement and stability of ratings obtained using the Functional Independence Measure for Children (WeeFIM) in a sample of children with developmental disabilities. DESIGN: A relational design was used in which two sets of WeeFIM scores were collected under four conditions: same rater-short interval; same rater-long interval; different rater-short interval; and different rater-long interval. SETTING: WeeFIM scores were collected in outpatient developmental rehabilitation centers, school programs, and the children's homes. PARTICIPANTS: Data were collected for 205 children ranging in age from 11 to 87 months. All children had a medical diagnosis of disability and were receiving habilitative-educational intervention or follow-along services including neurodevelopmental surveillance. INSTRUMENT: The WeeFIM instrument examines basic daily living and functional skills in children from birth to 7 years of age. The WeeFIM is modeled after the Functional Independence Measure (FIM) for adults and includes 18 items in the following subscales: self-care, sphincter control, transfers, locomotion, communication, and social cognition. RESULTS: Kappa values for items ranged from .44 to .82. Intraclass correlation coefficients (ICC) for the six subscales ranged from .73 to .98. Total WeeFIM ICC values were greater than .95 for all analyses. CONCLUSIONS: The WeeFIM ratings for the 205 children with developmental disabilities participating in this investigation were consistent across raters and time.

Activities of Daily Living↗

MHC-I antigen expression determines sensitivity of hematopoetic progenitor cells as targets for NK cells.

Hybrid resistance is suggested to be mediated by NK lymphocytes as effector cells. NK cytotoxicity is triggered by specific NK cells receptors. One group of receptors recognizing MHC-I antigens is predominantly transmitting an inhibitory signal into the cell. However, NK cells have not been shown to recognize hematopoetic progenitor cells directly. In these studies we demonstrate that hematopoetic progenitor cells are sensitive targets for NK recognition. NK cytotoxicity is shown to depend on MHC-I antigen expression on these target cells. Bone marrow-derived hematopoetic progenitor cells from a beta 2-microglobulin-deficient mouse strain exhibit a significant increase of cytotoxic susceptibility compared with the wild type control. CFU-assays reveal an almost complete loss of proliferation after coincubating MHC-I-deficient bone marrow cells with NK cells from the wildtype mouse strain. The examination of H-2K in allorecognition of hematopoetic progenitor cells reveals an increased cytotoxicity after treatment of resistant syngeneic hematopoetic progenitor cells with H-2Kb F(ab)2-antibodies. Also masking of allogeneic hematopoetic progenitor cells with anti-H-2Kd F (ab)2-antibodies results in enhanced NK killing. Thus, hematopoetic progenitor cells are sensitive targets for NK cells and MHC-I antigen complex is the critical structure in NK recognition of hematopoetic progenitor cells. This complex mediates resistance of NK-specific lysis of hematopoetic progenitor cells.

Animals↗

The effect of maxillary first molar derotation on arch length.

In the correction of Class II malocclusions, derotation of the maxillary first molars is required to obtain an idealized Class I relation. Because of its trapezoidal shape, the maxillary first molar is believed to provide an arch length gain attendant to its derotation, which may subsequently be used to resolve deficiencies mesial to it. Two commonly used mechanisms for maxillary first molar derotation and its associated centers of rotation were studied. A transpalatal arch, when accompanied by distal force equivalent at the level of the maxillary first molar center of resistance, can provide a center of rotation approximating the lingual attachment. This produces an arch length gain of 2.1 mm anterior to the molar, while simultaneously impinging on the maxillary second molar space 1.2 mm (per side). In reality, this may be a transference of a problem in one area of the dental arch to another. The 2 x 4 and 2 x 6 arch wires provide for various centers of rotation along an axis from the molar center of resistance--as projected to the occlusal surface--to the region of the maxillary first molar distal marginal ridge. These centers of rotation do not provide any meaningful alteration in arch length. These arch wires are useful, however, for maxillary first molar derotation necessary to achieve an idealized Class I molar occlusion. It is evident that the arch length gain related to derotation of the maxillary first molars, irrespective of the center of rotation, is insufficient to achieve Class I premolar intercuspation. Additional factors as growth, surgical intervention, or extractions are needed to achieve Class I premolar articulation.

Bicuspid↗

Changes in occlusion related to the cant of the occlusal plane.

It is known that dental occlusion is influenced by changes in the cant of the occlusal plane. This study has defined the geometric and mathematical relationships between dental occlusion and rotations of the occlusal plane in the sagittal view. As a general clinical guide, each degree of rotation of the occlusal plane will result in a half millimeter change in the dental occlusal relationship. This is of importance, because changes in the cant of the occlusal plane are sometimes unintentional, as well as intentional, during orthodontic therapy. An earlier study has also documented that the occlusal plane rotates naturally upward and forward approximately 6 degrees during growth and development. This phenomenon tends to develop a Class II dental relation and therefore has important implications for the developing dentition.

Biomechanical Phenomena↗

On the management of extraction sites.

Extraction sites may be needed to achieve specific orthodontic goals of positioning the dentition within the craniofacial complex. The fundamental reality that determines the final position of the dentition, however, is the control exercised by the clinician in closure of the extraction sites. A specific treatment objective may require the posterior teeth to remain in a constant position anteroposteriorly as well as vertically, while the anterior teeth occupy the entire extraction site. Another treatment objective may require the reverse, or any number of purposeful alternatives of extraction site closure. An appliance system developed over time, which provides this control, is described. The system takes advantage of aspects of continuous arch therapy that provides constant, positive orientation of the anterior and posterior groups of teeth to each other in three-dimensional space across an extraction site, combined with aspects of the segmented arch technique that permit definable and predictable force systems to be applied to these teeth. Consequently, the clinician has the ability to forecast treatment outcomes with confidence.

Bicuspid↗

Dynamic relationships of the mandibular anterior segment.

The hyperbolic cosine function is shown to be an accurate representation of the form of the mandibular anterior teeth from the canine/first premolar contact on one side around the perimeter to the opposite side (r = 0.951). On the basis of this mathematical function, the changes in canine width, anterior segment depth, arch perimeter, and their related incisor angular alterations are forecastable. This knowledge will allow the clinician to predict the effects on various aspects of the anterior segment arch form as one or more of these variables are altered without resorting to trial and error or performing a wax-up. For example, the clinician can predict the change in the anterior segment arch depth and incisor angulation that would occur with alterations in canine width.

Algorithms↗

An evaluation of condyle position in centric relation obtained by manipulation of the mandible with and without leaf gauge deprogramming.

Centric relation records of 19 dental students were obtained with leaf gauges and by mandibular manipulation. The condyle/fossa relationships were subsequently evaluated with enhanced sagittal cephalometry. Both clinical methods of obtaining centric relation revealed considerable variation of the condyle location within the glenoid fossa. Only 10% of the patients showed a condyle position "upward and forward" in the fossa with the leaf gauge method. In the mandibular manipulation technique of obtaining centric relation, 10% of the patients showed an "upward and rearward" position of the condyle.

Adult↗

A new concept: impulse in orthodontics.

One of the important uses of extraoral appliances is to counterbalance force systems placed on the reactive, anchor teeth by intraoral appliances such as space closure springs. Extraoral appliances are often worn less than full time, whereas intraoral springs act full time. Anecdotal evidence indicates that sufficient part-time extraoral appliance wear with appropriate force level is sufficient to balance intraoral appliance activity while preserving anchorage. A rational explanation is presented to substantiate this clinical evidence through equating extraoral impulse (force x time and/or moment x time) to the impulse conveyed to the teeth by the intraoral appliance. By adjusting force and/or moment magnitude in combination with the correct time of application, the clinician can achieve appropriate energy levels for anchorage in three dimensions.

Acceleration↗

Effect of reduction of nitric oxide on plasma and kidney tissue angiotensin II levels.

Nitric oxide synthase (NOS) blockade increases blood pressure (BP) and modifies glomerular and tubular function. Angiotensin II (AII) blockade restores glomerular and tubular function but does not lower BP. We measured plasma renin activity (PRA), plasma (AIIp), and kidney tissue (AIIk) AII with radioimmunoassay to investigate the dissociation between renal and systemic effects of NOS blockade. Two period clearance studies followed by plasma and renal tissue harvesting were performed in seven groups of rats. Groups 1 and 1A served as controls. Groups 2 and 2A received NaCl-NaHCO3 during the first period and N(G)-monomethyl-L-arginine (L-NMMA, 0.5 mg/kg/min) during the second period. Group 3 was similar to group 2 but renal perfusion pressure (RPP) was maintained constant by using an aortic snare. Groups 4 and 4A received N(G)-nitro-L-arginine-methyl ester (L-NAME, 5 mg/100 mL of drinking water) for 2 weeks. NOS blockers decreased AIIp (group 1, 74 +/- 7 pg/mL; group 2, 22 +/- 1 pg/mL; group 3, 26 +/- 1 pg/mL; group 4, 19 +/- 3 pg/mL). The decrease in AIIp was a direct effect of L-NMMA independent of changes in perfusion pressure, as AIIp was similar in group 3 (normal RPP) and groups 2 and 4 (increased RPP). Measurements of PRA and AIIp demonstrated a similar reduction in PRA and AIIp in rats treated with NOS blocker. Although NOS blockers decreased AIIp, acute or chronic administration of NOS blockers did not modify AIIk (group 1, 1,192 +/- 51; group 2, 1,354 +/- 85; group 3, 1,348 +/- 180; group 4, 1,276 +/- 172 pg/kidney). Our findings demonstrate that NO blockers produce a dissociation between plasma and kidney AII levels. This dissociation can explain the beneficial effects of AII blockers on renal function and their lack of antihypertensive effects in anesthetized rats treated with NOS blockers.

Angiotensin II↗

Variable modulus orthodontics advanced through an auxiliary archwire attachment.

Reducing the load deflection rates of orthodontic springs is important, for it provides relative constancy of the moment-to-force ratio applied to the teeth with concomitant, forecastable dental movement. Increasing patient comfort and reducing the number of office visits while lowering potential tissue damage are additional features of lower load deflection rate springs. A simple auxiliary attachment, which can be crimped into position on an archwire or onto segments of an archwire, is described. This attachment permits the clinician to incorporate a relatively high rate stiff wire to enhance the anchorage of the reactive teeth in one area of the dental arch, while allowing the use of lesser stiffness (lower load deflection rate spring) to engage teeth targeted for movement. The auxiliary allows the clinician various stiffness through the use of wire of one modulus (stainless steel, for example) in one area of the arch, and wire of a differing modulus (NiTi, for example) in another area of the same arch. The advantages and disadvantages of choosing wires of differing moduli are reviewed. Alternative methods of transforming the spring rate through changes in wire cross-section or length are also reviewed. Practical clinical applications of the auxiliary attachment are shown.

Dental Alloys↗