Search PubMed⌕ Search

Biomedical subjects

Rosaria Ferrigno

Publications and source records attributed to Rosaria Ferrigno.

9 recordsLinked to original sources
PubMed2006

Investigation of the mixing efficiency of a chaotic micromixer using thermal lens spectrometry.

This work investigates the efficiency of a chaotic micromixer using thermal lens spectrometry. The outlet of the mixing device was connected to a thermal lens detection head integrating the probe beam optical fibers and the sample capillary. The chaotic micromixer consisted of a Y-shaped poly(dimethylsiloxane) (PDMS) microchip in which ribbed herringbone microstructures were etched on the floor of the main channel. Due to the solvent composition dependence of the thermal lens response, the photothermal method was shown to be highly sensitive to nonhomogeneous mixing compared to fluorescence detection. The apparatus was applied to the determination of Fe2+ with 1,10-phenanthroline using flow injection analysis; a limit of detection of 11 microg L(-1) of iron was obtained.

Journal Article↗
PubMed2004

Potentiometric titrations in a poly(dimethylsiloxane)-based microfluidic device.

This paper describes a microfluidic device, fabricated in poly(dimethylsiloxane), that is used for potentiometric titrations. This system generates step gradients of redox potentials in a series of microchannels. These potentials are probed by microelectrodes that are integrated into the chip; the measured potentials were used to produce a titration curve from which the end point of a reaction was measured.

Dimethylpolysiloxanes↗
PubMed2003

Electrochemical desorption of self-assembled monolayers noninvasively releases patterned cells from geometrical confinements.

This report describes a method to pattern mammalian cells using self-assembled monolayers (SAMs), and then to use electrochemical desorption of these monolayers to release cells from their patterns. This method uses an oligo(ethyleneglycol)-terminated SAM to prevent,-and a methyl-terminated SAM to allow-adsorption of proteins and attachment of bovine capillary endothelial cells. Electrochemical removal of the oligo(ethyleneglycol)-terminated SAM allowed proteins to adsorb onto areas that had been previously inert and enabled cells to migrate into these areas. This straightforward technique is useful in bioassays for drug screening and for fundamental studies in cell biology.

Animals↗
PubMed2002

Membraneless vanadium redox fuel cell using laminar flow.

This paper describes the design and characterization of a small, membraneless redox fuel cell. The smallest channel dimensions of the cell were 2 mm x 50 mum or x 200 mum; the cell was fabricated in poly(dimethylsiloxane) using soft lithography. This all-vanadium fuel cell took advantage of laminar flow to obviate the need for a membrane to separate the solutions of oxidizing and reducing components.

Carbon↗
PubMed2002

Template-directed self-assembly of 10-microm-sized hexagonal plates.

This article presents a strategy for the fabrication of ordered microstructures using concepts of design inspired by molecular self-assembly and template-directed synthesis. The self-assembling components are 4-microm-thick hexagonal metal plates having sides 10 microm in length ("hexagons"), and each template consists of a 4-microm-thick circular metal plate surrounding a central cavity, the perimeter of which is complementary in shape to the external edges of a two-dimensional, close-packed array of hexagons. The hexagons and templates (collectively, "pieces") were fabricated via standard procedures and patterned into hydrophobic and hydrophilic regions using self-assembled monolayers (SAMs). Templated self-assembly occurs in water through capillary interactions between thin films of a nonpolar liquid adhesive coating the hydrophobic faces of the pieces. The hexagons tile the cavities enclosed by the templates, and the boundaries of the cavities determine the sizes and shapes of the assemblies. Curing the adhesive with ultraviolet light furnishes mechanically stable arrays having well-defined morphologies. By allowing control over the structures of the resulting aggregates, this work represents a step toward the development of practical methods for microfabrication based on self-assembly.

Chemistry, Organic↗
PubMed2002

A ceramic electrochemical microreactor for the methoxylation of methyl-2-furoate with direct mass spectrometry coupling.

A ceramic electrochemical reactor (CEM) devoted to electrosyntheses was developed. The CEM was constituted by the assembly of five structured ceramic layers. On one layer, platinum interdigitated band electrodes with a submillimetre interelectrode gap were screen-printed. The microreactor chamber was constituted by seven channels and its volume was less than 100 microL. After a sintering step at 850 degree C for 1 h, the CEM appeared as a solid and compact unit. The CEM was directly connected to the six port valve of a mass spectrometer allowing an on-line sampling and analysis of the reaction mixture. The methoxylation of the methyl-2-furoate was carried out and the effect of the residence time in the CEM was investigated thanks to mass spectrometry analyses.

Journal Article↗
PubMed2002

Protein purification by Off-Gel electrophoresis.

A novel free-flow protein purification technique based on isoelectric electrophoresis is presented, where the proteins are purified in solution without the need of carrier ampholytes. The gist of the method is to flow protein solutions under an immobilised pH gradient gel (IPG) through which an electric field is applied perpendicular to the direction of the flow. Due to the buffering capacity of the IPG gel, proteins with an isoelectric point (pI) close to pH of the gel in contact with the flow chamber stay in solution because they are neutral and therefore not extracted by the electric field. Other proteins will be charged when approaching the IPG gel and are extracted into the gel by the electric field. Both a demonstration experiment with pI markers and a simulation of the electric field distribution are presented to highlight the principle of the system. In addition, an isoelectric fractionation of an Escherichia coli extract is shown to illustrate the possible applications.

Bacterial Proteins↗