Biomedical subjects

Rory A Cooper

Publications and source records attributed to Rory A Cooper.

61 records · Page 4Linked to original sources

PubMedDate not supplied

A kinetic analysis of manual wheelchair propulsion during start-up on select indoor and outdoor surfaces.

The objective of this study was to conduct a kinetic analysis of manual wheelchair propulsion during start-up on select indoor and outdoor surfaces. Eleven manual wheelchairs were fitted with a SMART(Wheel) and their users were asked to push on a course consisting of high- and low-pile carpet, indoor tile, interlocking concrete pavers, smooth level concrete, grass, hardwood flooring, and a sidewalk with a 5-degree grade. Peak resultant force, wheel torque, mechanical effective force, and maximum resultant force rate of rise were analyzed during start-up for each surface and normalized relative to their steady-state values on the smooth level concrete. Additional variables included peak velocity, distance traveled, and number of strokes in the first 5 s of the trial. We compared biomechanical data between surfaces using repeated-measures mixed models and paired comparisons with a Bonferroni adjustment. Applied resultant force (p = 0.0154), wheel torque (p < 0.0001), and mechanical effective force (p = 0.0047) were significantly different between surfaces. The kinetic values for grass, interlocking pavers, and ramp ascent were typically higher compared with tile, wood, smooth level concrete, and high- and low-pile carpet. Users were found to travel shorter distances up the ramp and across grass (p < 0.0025) and had a higher stroke count on the ramp (p = 0.0124). While peak velocity was not statistically different, average velocity was slower for the ramp and grass, which indicates greater wheelchair/user deceleration between strokes. The differences noted between surfaces highlight the importance of evaluating wheelchair propulsion ability over a range of surfaces.

Adult↗

PubMedDate not supplied

Issues in maintenance and repairs of wheelchairs: A pilot study.

In this pilot study, we assessed wheelchair durability and its effect on user satisfaction. Specifically, we examined the characteristics of the participants' wheelchairs, the types of maintenance and repairs completed, and whether the participants' satisfaction was affected by problems with their wheelchairs. A convenience sample of 130 participants who used wheelchairs as their primary means of mobility was recruited. Participants completed a questionnaire about their wheelchairs, the maintenance and repair history, and their satisfaction levels. Results showed that 26% of the participants had completed a wheelchair repair in the past 6 months, 16% had completed general maintenance, and 27% had completed tire repairs. Neither hours of wheelchair use nor wheelchair age affected repair or maintenance frequency. Participants were generally satisfied with their wheelchairs. Better understanding of wheelchair maintenance and repair issues will guide improvements in wheelchair design and enhance the community participation of individuals who use wheelchairs.

Adult↗

PubMedDate not supplied

Rehabilitation Medicine Summit: Building Research Capacity-Executive Summary.

The general objective of the "Rehabilitation Medicine Summit: Building Research Capacity" was to advance and promote research in medical rehabilitation by making recommendations to expand research capacity. The five elements of research capacity that guided the discussions were (1) researchers; (2) research culture, environment, and infrastructure; (3) funding; (4) partnerships; and (5) metrics. The 100 participants included representatives of professional organizations, consumer groups, academic departments, researchers, governmental funding agencies, and the private sector. The small group discussions and plenary sessions generated an array of problems, possible solutions, and recommended actions. A post-Summit, multiorganizational initiative is called to pursue the agendas outlined in this report.

Biomedical Research↗

PubMedDate not supplied

Rehabilitation Medicine Summit: Building Research Capacity: executive summary.

The general objective of the "Rehabilitation Medicine Summit: Building Research Capacity" was to advance and promote research in medical rehabilitation by making recommendations to expand research capacity. The five elements of research capacity that guided the discussions were: (1) researchers; (2) research culture, environment, and infrastructure; (3) funding; (4) partnerships; and (5) metrics. The 100 participants included representatives of professional organizations, consumer groups, academic departments, researchers, governmental funding agencies, and the private sector. The small group discussions and plenary sessions generated an array of problems, possible solutions, and recommended actions. A post-Summit, multi-organizational initiative is called to pursue the agendas outlined in this report.

Allied Health Occupations↗

PubMedDate not supplied

Filter frequency selection for manual wheelchair biomechanics.

Wheelchair locomotion is an important form of mobility for many individuals with spinal cord injury. However, manual wheelchair propulsion can lead to upper-limb pain and can be very inefficient. This has led investigators to apply biomechanics to the study of wheelchair use. The objectives of this study were (1) to determine the frequency content of the motion of both hands during two speeds of wheelchair propulsion, (2) to obtain the filter frequencies necessary to remove noise from wheelchair motion data, and (3) to provide signal-to-noise ratio data for wheelchair kinematics. The participants in this study were a random sample of manual wheelchair users with paraplegia caused by spinal cord injury. Subjects propelled their personal wheelchairs on a computer-controlled dynamometer at speeds of 0.9 m/s and 1.8 m/s. Motion data were collected at 60 Hz with the use of a commercial infrared marker-based system. The main outcome measures were arm motions and noise frequency spectra, filter cutoff frequencies, and signal-to-noise ratio. Our results indicate that there is no useful signal power above 6 Hz during manual wheelchair propulsion at the speeds that we analyzed. In many cases, there was no useful signal power above 4 Hz. This would indicate that the frequency content of manual wheelchair propulsion is similar to that of human gait. The mean signal-to-noise ratio varied from a high of 91 dB to a low of 21.8 dB. The signal-to-noise ratio was greatest in the x direction (along the line of progression) and lowest in the z direction (medial-lateral). Manual wheelchair propulsion kinematic data should be low-pass filtered at approximately 6 Hz for speeds at or below 1.8 m/s. The data presented in the archival literature appear to have been filtered at an appropriate frequency.

Adult↗

PubMedDate not supplied

Freestyle seating.

Explore the source record for details and available documents.

Arm↗

PubMedDate not supplied

Rehabilitation medicine summit: building research capacity.

The general objective of the "Rehabilitation Medicine Summit: Building Research Capacity" was to advance and promote research in medical rehabilitation by making recommendations to expand research capacity. The 5 elements of research capacity that guided the discussions were (1) researchers; (2) research culture, environment, and infrastructure; (3) funding; (4) partnerships; and (5) metrics. The 100 participants included representatives of professional organizations, consumer groups, academic departments, researchers, governmental funding agencies, and the private sector. The small group discussions and plenary sessions generated an array of problems, possible solutions, and recommended actions. A post-Summit, multiorganizational initiative is called to pursue the agendas outlined in this article.

Biomedical Research↗