Search PubMed⌕ Search

Biomedical subjects

Robert S Marks

Publications and source records attributed to Robert S Marks.

14 recordsLinked to original sources
PubMed2007

T7 phage display of Ep15 peptide for the detection of WNV IgG.

West Nile virus (WNV) is one of the major emerging infectious diseases in North America. WNV belongs to the genus Flavivirus, and its rapid and extensive global spread has highlighted the necessity for accurate and specific assays for diagnosis of WNV infection. This study presents the first phage displayed peptide based ELISA for detection of WNV immunoglobulin G (IgG). The Ep15 epitope, derived from the WNV E protein DIII, was cloned into a T7 phage display system that was then used as recombinant antigen in a chemiluminescent ELISA format. The phage concentration was optimized at 5 x 10(10)PFU/ml and was used directly after polyethylene glycol concentration. The assay shows a limit of detection at a serum titer of 1:51,200 and a dynamic range from 1:100 to 1:2000. A screen of a panel of 66 human sera samples, and comparison with a commercial kit, revealed a sensitivity of 67% and a specificity of 100%. Considering the ease of antigen preparation, its stability and the optimum display properties of the T7 bacteriophage, it is apparent that this approach can be useful for the preparation of highly sensitive and specific anti-WNV immunoglobulin diagnostic kits.

Antibodies, Viral↗
PubMed2006

Electrogenerated indium tin oxide-coated glass surface with photosensitive interfaces: surface analysis.

We present herein a photo-immobilization technique for the localized and specific conjugation of biochip platforms with different proteinaceous bioreceptors, such as antigen or antibodies. This methodology based on a photoactivable electrogenerated polymer film, pyrrole-benzophenone, allows the covalent immobilization of biomolecules through light mediation. The surface-conductive glass platform electropolymerized with poly(pyrrole-benzophenone) thin film may then be used to affinity-coat the chip with molecular recognition probes. This glass chip electroconductive surface modification is done by the deposition of a thin layer of indium tin oxide (ITO). Thereafter, pyrrole-benzophenone monomers are electropolymerized onto the conductive metal oxide surface and then exposed to an antigen Staphylococcal Enterotoxin B (SEB)) solution and illuminated with UV light (wavelength approximately 345 nm) through a mask. As a result of the photochemical reaction, a pattern thin layer of the antigen was covalently bound to the benzophenone-modified surface. Then the sample to be analyzed, along with its specific target antibody (anti-SEB antibodies), is introduced onto the glass surface and left to react with the previously photo-immobilized antigen. When the immuno-reaction is completed, the specifically attached immunoglobulin analytes are detected by using secondary antibodies conjugated with Fluorescein isothiocyanate (FITC). The fluorescence signal emanating from the biochip surface is then quantified by two methods, using a filtered intensified charge-coupled device (CCD) camera and a grating spectrometer.

Antibodies↗
PubMed2006

Electroenzymatic polypyrrole-intercalator sensor for the determination of West Nile virus cDNA.

The chemical binding of a redox acridone derivative onto a polypyrrole film functionalized by N-hydroxysuccinimide groups provided an electrode capable of anchoring DNA duplex by simple insertion of the grafted acridone intercalator into the dsDNA solution. This electrode was applied for the detection of a ssDNA derived from a West Nile virus sequence. The latter was thus amperometrically detected after its hybridization in solution with a biotinylated complementary oligonucleotide followed by its anchoring and labeling by a glucose oxidase at 1 pg/mL.

Base Sequence↗
PubMed2006

Protease amperometric sensor.

An amperometric biosensor for the detection of trypsin was developed. The latter was based on a two-layer configuration, namely, a polymer-glucose oxidase inner layer and a gelatin outer layer. In the presence of glucose, the enzyme layer produces H2O2 and hence an amperometric signal due to H2O2 electrooxidation was generated by potentiostating the electrode at 0.6 V. The biosensor detects the change in the increase in the maximum current caused by the proteolytic digestion of gelatin, which covers the platinum electrodes, thereby facilitating a speedier access for the glucose substrate to the electrode modified with both poly(pyrrole-alkylammonium) and glucose oxidase molecules. Our biosensor detected low trypsin concentrations down to 42 pM with a response time of approximately 10 min, making it a very sensitive device in the detection of lower trypsin levels with such future putative applications as the diagnosis of pancreatic diseases.

Animals↗
PubMed2006

Chemiluminescent optical fiber immunosensor for detection of autoantibodies to ovarian and breast cancer-associated antigens.

We report herein the development of an optical fiber based chemiluminescent immunosensor for detection of the native autoimmune response to GIPC-1, a PDZ containing protein involved in regulation of G-protein signaling. The recombinant protein GIPC-1 was expressed in bacteria, purified, refolded and conjugated to the tip of an optical fiber. A human monoclonal 27.B1 IgM isolated from a breast cancer patient, which targets the GIPC-1 protein, was used for calibration of the immunosensor and was detected down to a concentration of 30 pg/ml. We determined that the fiber-optic immunosensor had a detection limit 50 times lower than chemiluminescent ELISA, and approximately 500 times lower than colorimetric ELISA. In addition, sera from 11 ovarian cancer patients, 22 breast cancer patients and asymptomatic controls were tested for the presence of IgM anti-GIPC-1 autoantibodies in their serum using the two methods. The immunosensor assay detected 54% and 77% GIPC-1 positive sera within ovarian and breast cancer patients, respectively, as compared to chemiluminescent ELISA, which only detected 18% and 27%, respectively. We envision that this immunosensor may serve as a diagnostic tool for screening women for ovarian and breast cancer at an early stage, thus increasing their chance of survival.

Adaptor Proteins, Signal Transducing↗
PubMed2005

Manufacturing of nanochannels with controlled dimensions using protease nanolithography.

The feasibility of creating nanometer scale depressions in biological substrates using active enzymes delivered with scanning probe microscopes has been previously demonstrated by us and other groups. Here we present a comprehensive study revealing the dependence of channels dimensions on the parameters of the "writing" process and provide a simple way to precisely control their dimensions. Such nanochannels may be used in nanofluidic biochip applications.

Adsorption↗
PubMed2004

Construction of amperometric immunosensors based on the electrogeneration of a permeable biotinylated polypyrrole film.

The construction of amperometric immunosensors to cholera antitoxin immunoglobulins were shown to have improved sensitivity when the cholera toxin B subunit biorecognition entity was linked to an electrogenerated biotinylated polypyrrole film copolymerized with pyrrole-lactobionamide monomer. The copolymer exhibits greater film permeability than biotinylated polypyrrolic or polyphenolic films for the permeation of electroactive species. Hence, when the presence of the HRP marker of the immunoassay was determined using hydroquinone, the production of electroactive quinone was shown to permeate faster to the electrode, thus providing a faster response time.

Antibodies↗
PubMed2003

Development of an "electroptode" immunosensor: indium tin oxide-coated optical fiber tips conjugated with an electropolymerized thin film with conjugated cholera toxin B subunit.

We demonstrate that it is possible to create surface-conductive fiber optics, upon which may be electropolymerized a biotinylated polypyrrole thin film, which may then be used to affinity coat the fiber with molecular recognition probes. This fiber-optic electroconductive surface modification is done by the deposition of a thin layer of indium tin oxide. Thereafter, biotin-pyrrole monomers are electropolymerized onto the conductive metal oxide surface and then exposed to avidin. Avidin-biotin interactions were used to modify the fiber optics with biotin-conjugated cholera toxin B subunit molecules, for the construction of an immunosensor to detect cholera antitoxin antibodies. The biosensor was tested for sensitivity, nonspecificity, and overall practicality.

Antibodies↗
PubMed2002

An innovative strategy for immobilization of receptor proteins on to an optical fiber by use of poly(pyrrole-biotin).

We report an innovative and useful procedure for immobilization of antibodies on to a fiber-optic silica surface. The procedure consists in the chemical oxidation of pyrrole-biotin monomers that are readily deposited as a thin film of poly(pyrrole-biotin) polymer on to the end-face of the fiber. The film was shown to be sufficiently translucent to enable photon coupling within the fiber transducer and its presence was demonstrated by means of fluorescent micrographs of bound rhodamine-labeled avidin. Fiber-optics modified with cholera toxin B subunit molecules were tested for sensitivity, non-specificity, and overall practicality. It was shown that the fiber-optic immuno-assay for the detection of anti-cholera toxin antibody was up to three orders of magnitude more sensitive than the classical enzyme-linked immunosorbent assay (ELISA).

Biotin↗
PubMed2002

A comparative study of gallstones from children and adults using FTIR spectroscopy and fluorescence microscopy.

BACKGROUND: Cholelithiasis is the gallstone disease (GSD) where stones are formed in the gallbladder. The main function of the gallbladder is to concentrate bile by the absorption of water and sodium. GSD has high prevalence among elderly adults. There are three major types of gallstones found in patients, White, Black and Brown. The major chemical component of white stones is cholesterol. Black and brown stones contain different proportions of cholesterol and bilirubin. The pathogenesis of gallstones is not clearly understood. Analysis of the chemical composition of gallstones using various spectroscopic techniques offers clues to the pathogenesis of gallstones. Recent years has seen an increasing trend in the number of cases involving children. The focus of this study is on the analysis of the chemical composition of gallstones from child and adult patients using spectroscopic methods. METHODS: In this report, we present FTIR spectroscopic studies and fluorescence microscopic analysis of gallstones obtained from 67 adult and 21 child patients. The gallstones were removed during surgical operations at Soroka University Medical Center. RESULTS: Our results show that black stones from adults and children are rich in bilirubin. Brown stones are composed of varying amounts of bilirubin and cholesterol. Green stones removed from an adult, which is rare, was found to be composed mainly of cholesterol. Our results also indicated that cholesterol and bilirubin could be the risk factors for gallstone formation in adults and children respectively. Fluorescence micrographs showed that the Ca-bilirubinate was present in all stones in different quantities and however, Cu-bilirubinate was present only in the mixed and black stones. CONCLUSIONS: Analysis based on FTIR suggest that the composition of black and brown stones from both children and adults are similar. Various layers of the brown stone from adults differ by having varying quantities of cholesterol and calcium carbonate. Ring patterns observed mainly in the green stone using fluorescence microscopy have relevance to the mechanism of the stone formation. Our preliminary study suggests that bilirubin and cholesterol are the main risk factors of gallstone disease.

Adult↗
PubMedDate not supplied

Photochemical attachment of biomolecules onto fibre-optics for construction of a chemiluminescent immunosensor.

We report herein a simple and effective way to photochemically immobilize biomolecules onto a fibre-optic silica surface. The system is based on a photoreactive benzophenone derivative that is bound to SiO2 surfaces of the optical fibre via a silane anchor. The benzophenone derivative was 4-allyloxybenzophenone, synthesized by standard procedures that were later used to synthesize the 4-(3'-chlorodimethylsilyl) propyloxybenzophenone and 4-(3'-dichloromethylsilyl) propyloxybenzophenone by regular hydrosilation procedures. After silanization with the benzophenone derivatives, the fibres were immersed in a cholera toxin B subunit solution and illuminated with UV light (wavelength > 345 nm). As a result of the photochemical reaction, a thin layer of the antigen was covalently bound to the benzophenone-modified surface. The photochemically modified fibre-optics were then tested as immunosensors in the detection of cholera anti-toxin antibody and revealed through chemiluminescence measurements. A secondary antibody labelled with horseradish peroxidase acted as the marker for the cholera toxin antibody. A photo-electronic set-up was designed specifically to monitor the signal. The immunosensor system was shown to be both specific and sensitive. The lowest rabbit serum titre detected was 1:1 700,000.

Animals↗
PubMedDate not supplied

Synthesis and characterization of a biotin-alginate conjugate and its application in a biosensor construction.

Biotin was covalently coupled with alginate in an aqueous-phase reaction by means of carbodiimide-mediated activation chemistry to provide a biotin-alginate conjugate for subsequent use in biosensor applications. The synthetic procedure was optimized with respect to pH of the reaction medium (pH 6.0), the degree of uronic acid activation (20%), and the order of addition of the reagents. The biotin-alginate conjugate was characterized by titration with 2-anilinonaphthalene-6-sulfonic acid (2,6-ANS), 4-hydroxyazobene-2'-carboxylic acid (HABA) and by an HPSEC-MALLS analytical method as well as by FTIR and 13C NMR spectroscopy. As a compromise between the need for a high percent of molar modification of the alginate, on one hand, and sufficient gelling capability, on the other hand, an optimal modification of 10-13% of biotin-alginate was used. The new biotin-alginate conjugate was used for the encapsulation of bioluminescent reporter cells into microspheres. A biosensor was prepared by conjugating these biotinylated alginate microspheres to the surface of a streptavidin-coated optical fiber, and the performance of the biosensor was demonstrated in the determination of the antibiotic, mitomycin C as a model toxin.

Alginates↗
PubMedDate not supplied

Synthesis and characterization of a pyrrole-alginate conjugate and its application in a biosensor construction.

N-(3-Aminopropyl)pyrrole was covalently coupled with alginate in an aqueous-phase reaction by means of carbodiimide-mediated activation chemistry to provide a pyrrole-alginate conjugate for subsequent use in biosensor applications. The pyrrole-alginate conjugate was quantified by UV spectroscopy at 230 nm, by an HPSEC-MALLS analytical method, as well as by FTIR and 13C NMR spectroscopies. The new pyrrole-alginate conjugate was used for the immobilization of polyphenol oxidase (PPO) onto an electrode surface by physical entrapment resulting from the gellification process and electrochemical polymerization of the pyrrole groups. The efficiency of this cross-linking approach (chemical and electrochemical) was investigated by comparing the amount of enzyme released from polypyrrole-alginate and regular alginate. In addition, biosensors were prepared by entrapment of the PPO in polypyrrole-alginate and regular alginate matrixes and their performance for the amperometric determination of catechol chosen as a model analyte was examined, yielding a sensitivity of 350 and 80 microA M(-1) cm(-2), respectively, for polypyrrole-alginate and alginate biosensors.

Alginates↗